Age | Commit message (Expand) | Author |
2009-11-21 | e1000e: consolidate two dbug macros into one simpler one | Bruce Allan |
2009-11-21 | e1000e: cleanup redundant #include's | Bruce Allan |
2009-11-21 | e1000e: disable K1 on PCH LOM when in PHY loopback mode | Bruce Allan |
2009-10-29 | e1000e: rework disable K1 at 1000Mbps for 82577/82578 | Bruce Allan |
2009-10-29 | e1000e: config PHY via software after resets | Bruce Allan |
2009-10-26 | e1000e: allow for swflag to be held over consecutive PHY accesses | Bruce Allan |
2009-10-26 | e1000e: separate mutex usage between NVM and PHY/CSR register for ICHx/PCH | Bruce Allan |
2009-10-26 | e1000e: 82577/82578 requires a different method to configure LPLU | Bruce Allan |
2009-10-26 | e1000e: increase swflag acquisition timeout for ICHx/PCH | Bruce Allan |
2009-10-26 | e1000e: clear PHY wakeup bit after LCD reset on 82577/82578 | Bruce Allan |
2009-10-22 | e1000e: reset the PHY on 82577/82578 when going to Sx | Bruce Allan |
2009-08-09 | e1000e: fix potential NVM corruption on ICH9 with 8K bank size | Bruce Allan |
2009-08-09 | e1000e: fix acquisition of SW/FW/HW semaphore for ICHx parts | Bruce Allan |
2009-07-03 | e1000e: disable K1 at 1000Mbps for 82577/82578 | Bruce Allan |
2009-07-03 | e1000e: prevent NVM corruption on sectors larger than 4K | Bruce Allan |
2009-07-03 | e1000e: do not write SmartSpeed register bits on parts without support | Bruce Allan |
2009-07-03 | e1000e: delay after LCD reset and proper checks for PHY configuration done | Bruce Allan |
2009-06-03 | e1000e: workaround a Tx hang on 82577/82578 | Bruce Allan |
2009-06-03 | e1000e: add support for 82577/82578 GbE LOM parts | Bruce Allan |
2009-06-03 | e1000e: specify max supported frame size in adapter struct | Bruce Allan |
2009-02-14 | e1000e: Remove mutex_trylock and associated WARN on failure. | dave graham |
2009-01-11 | e1000e: Add process name to WARN message when detecting Mutex contention | David Graham |
2008-12-15 | Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/ne... | David S. Miller |
2008-12-11 | e1000e: fix double release of mutex | Jeff Kirsher |
2008-11-21 | e1000e: check return code from NVM accesses and fix bank detection | Bruce Allan |
2008-11-21 | e1000e: cosmetic newline in debug message | Bruce Allan |
2008-11-21 | e1000e: sync change flow control variables with ixgbe | Bruce Allan |
2008-11-21 | e1000e: update comments listing supported parts for each MAC family | Bruce Allan |
2008-10-08 | Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/ne... | David S. Miller |
2008-10-03 | e1000e: Fix incorrect debug warning | Linus Torvalds |
2008-10-02 | e1000e: debug contention on NVM SWFLAG | Thomas Gleixner |
2008-10-02 | e1000e: reset swflag after resetting hardware | Jesse Brandeburg |
2008-10-01 | e1000e: write protect ICHx NVM to prevent malicious write/erase | Bruce Allan |
2008-09-24 | e1000e: remove failed request for sw/fw/hw flag | Bruce Allan |
2008-09-03 | e1000e: add support for new 82574L part | Bruce Allan |
2008-09-03 | e1000e: add support for 82567LM-3 and 82567LF-3 (ICH10D) parts | Bruce Allan |
2008-09-03 | e1000e: add support for the 82567LM-4 device | Bruce Allan |
2008-05-06 | e1000e: Add support for BM PHYs on ICH9 | Bruce Allan |
2008-04-16 | e1000e: rename a few functions | Jeff Kirsher |
2008-04-16 | e1000e: Make arrays out of these Rx/Tx registers | Jeff Kirsher |
2008-03-28 | e1000e: reorganize PHY and flow control interface | Jeff Kirsher |
2008-03-28 | e1000e: rename mc_addr_list_update | Jeff Kirsher |
2008-03-28 | e1000e: reformat comment blocks, cosmetic changes only | Bruce Allan |
2008-02-24 | e1000e: fix spelling errors in comments | Auke Kok |
2007-10-10 | [E1000E]: New pci-express e1000 driver (currently for ICH9 devices only) | Auke Kok |