summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/amd
AgeCommit message (Collapse)Author
2014-11-06amd-xgbe: Check for complete packet on skb allocation errorLendacky, Thomas
If the skb allocation fails during receive processing, the driver would continue reading descriptors without first determining if there were any more descriptors for the current packet. Update the code to check whether more descriptors are associated with the current packet or whether to move on to the next descriptor as a new packet. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06amd-xgbe: Free channel/ring structures laterLendacky, Thomas
The channel structure is freed before freeing the per channel interrupts resulting in a kernel oops. Move the call to free the channel structure to after the freeing of the per channel interrupts. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05amd-xgbe: Let AMD_XGBE depend on HAS_IOMEMLendacky, Thomas
The amd-xgbe driver needs to perform ioremap calls, so add HAS_IOMEM to its build dependency. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05amd-xgbe: Fix a spelling errorLendacky, Thomas
This patch fixes the spelling of the word "descriptor" in a couple of locations. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05amd-xgbe: Add receive side scaling ethtool supportLendacky, Thomas
This patch adds support for ethtool receive side scaling (RSS) commands. Support is added to get/set the RSS hash key and the RSS lookup table. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05amd-xgbe: Provide support for receive side scalingLendacky, Thomas
This patch provides support for receive side scaling (RSS). RSS allows for spreading incoming network packets across the Rx queues. When used in conjunction with the per DMA channel interrupt support, this allows the receive processing to be spread across multiple processors. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05amd-xgbe: Add support for per DMA channel interruptsLendacky, Thomas
This patch provides support for interrupts that are generated by the Tx/Rx DMA channel pairs of the device. This allows for Tx and Rx processing to run across multiple processsors. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05amd-xgbe: Implement split header receive supportLendacky, Thomas
Provide support for splitting IP packets so that the header and payload can be sent to different DMA addresses. This will allow the IP header to be put into the linear part of the skb while the payload can be added as frags. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05amd-xgbe: Use page allocations for Rx buffersLendacky, Thomas
Use page allocations for Rx buffers instead of pre-allocating skbs of a set size. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05amd-xgbe: Use the u32 data type for descriptorsLendacky, Thomas
The Tx and Rx descriptors are unsigned 32 bit values. Use the u32 type, rather than unsigned int, to map these descriptors. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05amd-xgbe: Rename pre_xmit function to dev_xmitLendacky, Thomas
The pre_xmit function name implies that it performs operations prior to transmitting the packet when in fact it is responsible for setting up the descriptors and initiating the transmit. Rename this to function from pre_xmit to dev_xmit, which is consistent with the name used during receive processing - dev_read. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05amd-xgbe: Move ring allocation to device openLendacky, Thomas
Move the channel and ring tracking structures allocation to device open. This will allow for future support to vary the number of Tx/Rx queues without unloading the module. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-22amd-xgbe: Fix napi Rx budget accountingLendacky, Thomas
Currently the amd-xgbe driver increments the packets processed counter each time a descriptor is processed. Since a packet can be represented by more than one descriptor incrementing the counter in this way is not appropriate. Also, since multiple descriptors cause the budget check to be short circuited, sometimes the returned value from the poll function would be larger than the budget value resulting in a WARN_ONCE being triggered. Update the polling logic to properly account for the number of packets processed and exit when the budget value is reached. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-22amd-xgbe: Properly handle feature changes via ethtoolLendacky, Thomas
The ndo_set_features callback function was improperly using an unsigned int to save the current feature value for features such as NETIF_F_RXCSUM. Since that feature is in the upper 32 bits of a 64 bit variable the result was always 0 making it not possible to actually turn off the hardware RX checksum support. Change the unsigned int type to the netdev_features_t type in order to properly capture the current value and perform the proper operation. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22am2150: Update nmclan_cs.c to use update PCMCIA APIJeff Kirsher
Resolves compile warning about use of a deprecated function call: drivers/net/ethernet/amd/nmclan_cs.c: In function ‘nmclan_config’: drivers/net/ethernet/amd/nmclan_cs.c:624:3: warning: ‘pcmcia_request_exclusive_irq’ is deprecated (declared at include/pcmcia/ds.h:213) [-Wdeprecated-declarations] ret = pcmcia_request_exclusive_irq(link, mace_interrupt); Updates pcmcia_request_exclusive_irq() to pcmcia_request_irq(). CC: Roger Pao <rpao@paonet.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12ethernet: amd: use pr_info_once()Varka Bhadram
It will use pr_info_one() to print the version info of the driver in probe function only once. No need to use the static variable here. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-09-05amd-xgbe: Enable interrupts for all management countersLendacky, Thomas
As the management counters reach a threshold they will generate an interrupt so the value can be saved and the counter reset. The current code does not enable this interrupt on all counters. This can result in inaccurate statistics. Update the code to enable all the counters to generate an interrupt when its threshold is exceeded. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05amd-xgbe: Treat certain counter registers as 64 bitLendacky, Thomas
Even if the management counters are configured to be 32 bit register values, the [rt]xoctetcount_gb and [rt]xoctetcount_g counters are always 64 bit counter registers. Since they are not being treated as 64 bit values, these statistics are being reported incorrectly (ifconfig, ethtool, etc.). Update the routines used to read the registers to access the "hi" register (an offset of 4 from the "lo" register) to create a 64 bit value for these 64 bit counters. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05amd-xgbe: Checkpatch driver fixesLendacky, Thomas
This patch contains fixes identified by checkpatch when run with the strict option. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02amd-xgbe: Fix initialization of the wrong spin lockLendacky, Thomas
During allocation and initialization of the network driver structures, the wrong pointer is used to initialize a spin lock. Fix the spin lock initialization by using the proper pointer. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01amd-xgbe: Use the Tx queue count for Tx flow control supportLendacky, Thomas
When configuring Tx flow control the Rx queue count was used instead of the Tx queue count for looping through the Tx hardware queues. Fix the code to use the Tx queue count. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01amd-xgbe: Fix the xpcs mmd debugfs supportLendacky, Thomas
The debugfs support for the xpcs registers did not properly use the specified mmd (xpcs_mmd entry) which resulted in the default mmd value always being used. Update the debugfs support to generate the proper mmd register value. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01amd-xgbe: Reported fifo size from hardware is not correctLendacky, Thomas
The fifo size reported by the hardware is not correct. Add support to limit the reported size to what is actually present. Also, fix the argument types used in the fifo size calculation function. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01amd-xgbe: Check for Tx hardware queue flushing supportLendacky, Thomas
The flushing of the Tx hardware queues is only supported at a certain level of the hardware. Retrieve the current version of the hardware and use that to determine if flushing is supported. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14Merge tag 'pci-v3.17-changes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas: "Part two of the PCI changes for v3.17: - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine) It's a mechanical change that removes uses of the DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge window to reduce conflicts, but it's possible you'll still see a few" * tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
2014-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Several networking final fixes and tidies for the merge window: 1) Changes during the merge window unintentionally took away the ability to build bluetooth modular, fix from Geert Uytterhoeven. 2) Several phy_node reference count bug fixes from Uwe Kleine-König. 3) Fix ucc_geth build failures, also from Uwe Kleine-König. 4) Fix klog false positivies when netlink messages go to network taps, by properly resetting the network header. Fix from Daniel Borkmann. 5) Sizing estimate of VF netlink messages is too small, from Jiri Benc. 6) New APM X-Gene SoC ethernet driver, from Iyappan Subramanian. 7) VLAN untagging is erroneously dependent upon whether the VLAN module is loaded or not, but there are generic dependencies that matter wrt what can be expected as the SKB enters the stack. Make the basic untagging generic code, and do it unconditionally. From Vlad Yasevich. 8) xen-netfront only has so many slots in it's transmit queue so linearize packets that have too many frags. From Zoltan Kiss. 9) Fix suspend/resume PHY handling in bcmgenet driver, from Florian Fainelli" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (55 commits) net: bcmgenet: correctly resume adapter from Wake-on-LAN net: bcmgenet: update UMAC_CMD only when link is detected net: bcmgenet: correctly suspend and resume PHY device net: bcmgenet: request and enable main clock earlier net: ethernet: myricom: myri10ge: myri10ge.c: Cleaning up missing null-terminate after strncpy call xen-netfront: Fix handling packets on compound pages with skb_linearize net: fec: Support phys probed from devicetree and fixed-link smsc: replace WARN_ON() with WARN_ON_SMP() xen-netback: Don't deschedule NAPI when carrier off net: ethernet: qlogic: qlcnic: Remove duplicate object file from Makefile wan: wanxl: Remove typedefs from struct names m68k/atari: EtherNEC - ethernet support (ne) net: ethernet: ti: cpmac.c: Cleaning up missing null-terminate after strncpy call hdlc: Remove typedefs from struct names airo_cs: Remove typedef local_info_t atmel: Remove typedef atmel_priv_ioctl com20020_cs: Remove typedef com20020_dev_t ethernet: amd: Remove typedef local_info_t net: Always untag vlan-tagged traffic on input. drivers: net: Add APM X-Gene SoC ethernet driver support. ...
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-08drivers/net/ethernet/amd/pcnet32.c: neaten and remove unnecessary OOM messagesJoe Perches
Make the code flow a little better for 80 columns. Use a consistent style for the RX and TX rings allocation. Use BIT macro. Use a temporary unsiged int entries for (1<<size). Remove the OOM messages as they duplicate the generic OOM and dump_stack() provided by the memory subsystem. Reflow allocs to 80 columns. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Don Fry <pcnet32@frontier.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08amd: use pci_zalloc_consistentJoe Perches
Remove the now unnecessary memset too. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Don Fry <pcnet32@frontier.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07amd: xgbe: fix duplicate #include of linux/phy.hJean Sacren
The header linux/phy.h was included twice, so delete one of them. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-07Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 3.17. It contains: - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy updates - MIPS ptrace updates and cleanups - various fixes that will also go to -stable - a number of cleanups and small non-critical fixes. - NUMA support for the Loongson 3. - more support for MSA - support for MAAR - various FP enhancements and fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) MIPS: jz4740: remove unnecessary null test before debugfs_remove MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive MIPS: ZBOOT: implement stack protector in compressed boot phase MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT MIPS: Bonito64: remove a duplicate define MIPS: Malta: initialise MAARs MIPS: Initialise MAARs MIPS: detect presence of MAARs MIPS: define MAAR register accessors & bits MIPS: mark MSA experimental MIPS: Don't build MSA support unless it can be used MIPS: consistently clear MSA flags when starting & copying threads MIPS: 16 byte align MSA vector context MIPS: disable preemption whilst initialising MSA MIPS: ensure MSA gets disabled during boot MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains MIPS: fix MSA context for tasks which don't use FP first MIPS: init upper 64b of vector registers when MSA is first used MIPS: save/disable MSA in lose_fpu MIPS: preserve scalar FP CSR when switching vector context ...
2014-08-05amd-xgbe: Perform phy connect/disconnect at dev open/stopLendacky, Thomas
A change added to the mdiobus/phy api added a module_get/module_put during phy connect/disconnect processing. Currently, the driver performs a phy connect during module probe and a phy disconnect during module remove. With the addition of the module_get during phy connect the amd-xgbe module use count is incremented and can no longer be unloaded. Move the phy connect/disconnect from the driver probe/remove functions to the net_device_ops ndo_open/ndo_stop functions. This allows the module use count to be decremented when the device(s) are brought down and allows the module to be unloaded. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05amd-xgbe: Use dma_set_mask_and_coherent to set DMA maskLendacky, Thomas
Use the dma_set_mask_and_coherent function to set the DMA mask rather than setting the DMA mask fields directly. This was originally done to work around a bug in the arm64 DMA support when RAM started above the 4GB boundary which has since been fixed. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02amd-xgbe: Remove unnecessary spinlocksLendacky, Thomas
Remove the spinlocks around the ethtool get and set settings functions and within the link adjustment callback routine. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30amd-xgbe: Add traffic class supportLendacky, Thomas
This patch adds support for traffic classes as well as support for Data Center Bridging interfaces related to traffic classes and priority flow control. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30amd-xgbe: Base queue fifo size and enablement on ring countLendacky, Thomas
When setting the fifo sizes for the queues and enabling the queues use the number of active Tx and Rx queues that have been enabled not the maximum number available. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30amd-xgbe: Update/fix 2.5GbE supportLendacky, Thomas
Update the amd-xgbe driver and phylib driver to better support the 2.5GbE mode for the hardware. In order to be able establish 2.5GbE using clause 73 auto negotiation the device will support speed sets of 1GbE/10GbE and 2.5GbE/10GbE. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30amd-xgbe: Add hardware timestamp supportLendacky, Thomas
This patch adds support for Tx and Rx hardware timestamping. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30MIPS: Alchemy: remove au_read/write/syncManuel Lauss
replace au_read/write/sync with __raw_read/write and wmb. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7465/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: Alchemy: move ethernet registers to ethernet driverManuel Lauss
Move the register offsets and bit descriptions from the au1000.h header to their only user, the au1000_eth.c driver. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: netdev@vger.kernel.org Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7460/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-23amd-xgbe: Fix error return code in xgbe_probe()Wei Yongjun
Fix to return a negative error code from the setting real tx queue count error handling case instead of 0. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15amd-xgbe: Remove the adjustments needed for fixed speedLendacky, Thomas
With the addition of entries in the phy speed/duplex settings array to support KR and KX mode, the work-around to add/remove baseT settings to run at a fixed speed is no longer needed. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14ethernet: amd: fix 'foo* bar'Varka Bhadram
This patch fix the 'foo*' bar with 'foo *bar' and (foo*) with (foo *). Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14ethernet: amd: fix pci device idsVarka Bhadram
Normally any device ids will be above the corresponding device driver structure. This patch moves the pci device ids and MODULE_DEVICE_TABLE() above the pci driver structure. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14ethernet: amd: fix comment stylesVarka Bhadram
This patch fixes the comment style issues Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14ethernet: amd: dynamic debug fixesVarka Bhadram
This patch convert printk() to netdev_dbg/info/err or dev_info/err/dbg Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14ethernet: amd: use devm_ioremap()Varka Bhadram
This patch replace ioremap() with the devm_ioremap() so that the resource will be freed automatically with the probe failed. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14ethernet: amd: move amd111e_remove_one after probeVarka Bhadram
This patch moves the remove functionalities after the probe so that we can see the registered and released resources properly. Every driver follows the same concept. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-27 06:23:02 +0000