summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnx2x
AgeCommit message (Collapse)Author
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24bnx2x: fix crash during TSO tunnelingDmitry Kravkov
When TSO packet is transmitted additional BD w/o mapping is used to describe the packed. The BD needs special handling in tx completion. kernel: Call Trace: kernel: <IRQ> [<ffffffff815e19ba>] dump_stack+0x19/0x1b kernel: [<ffffffff8105dee1>] warn_slowpath_common+0x61/0x80 kernel: [<ffffffff8105df5c>] warn_slowpath_fmt+0x5c/0x80 kernel: [<ffffffff814a8c0d>] ? find_iova+0x4d/0x90 kernel: [<ffffffff814ab0e2>] intel_unmap_page.part.36+0x142/0x160 kernel: [<ffffffff814ad0e6>] intel_unmap_page+0x26/0x30 kernel: [<ffffffffa01f55d7>] bnx2x_free_tx_pkt+0x157/0x2b0 [bnx2x] kernel: [<ffffffffa01f8dac>] bnx2x_tx_int+0xac/0x220 [bnx2x] kernel: [<ffffffff8101a0d9>] ? read_tsc+0x9/0x20 kernel: [<ffffffffa01f8fdb>] bnx2x_poll+0xbb/0x3c0 [bnx2x] kernel: [<ffffffff814d041a>] net_rx_action+0x15a/0x250 kernel: [<ffffffff81067047>] __do_softirq+0xf7/0x290 kernel: [<ffffffff815f3a5c>] call_softirq+0x1c/0x30 kernel: [<ffffffff81014d25>] do_softirq+0x55/0x90 kernel: [<ffffffff810673e5>] irq_exit+0x115/0x120 kernel: [<ffffffff815f4358>] do_IRQ+0x58/0xf0 kernel: [<ffffffff815e94ad>] common_interrupt+0x6d/0x6d kernel: <EOI> [<ffffffff810bbff7>] ? clockevents_notify+0x127/0x140 kernel: [<ffffffff814834df>] ? cpuidle_enter_state+0x4f/0xc0 kernel: [<ffffffff81483615>] cpuidle_idle_call+0xc5/0x200 kernel: [<ffffffff8101bc7e>] arch_cpu_idle+0xe/0x30 kernel: [<ffffffff810b4725>] cpu_startup_entry+0xf5/0x290 kernel: [<ffffffff815cfee1>] start_secondary+0x265/0x27b kernel: ---[ end trace 11aa7726f18d7e80 ]--- Fixes: a848ade408b ("bnx2x: add CSUM and TSO support for encapsulation protocols") Reported-by: Yulong Pei <ypei@redhat.com> Cc: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24bnx2x: fix set_setting for some PHYsYaniv Rosner
Allow set_settings() to complete succesfully even if link is not estabilished and port type isn't known yet. Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17Update setapp/getapp prototypes in dcbnl_rtnl_ops to return int instead of u8Anish Bhatt
v2: fixed issue with checking return of dcbnl_rtnl_ops->getapp() Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01bnx2x: Fail probe of VFs using an old incompatible driverYuval Mintz
There are linux distributions where the inbox bnx2x driver contains SRIOV support but doesn't contain the changes introduced in b9871bcf "bnx2x: VF RSS support - PF side". A VF in a VM running that distribution over a new hypervisor will access incorrect addresses when trying to transmit packets, causing an attention in the hypervisor and making that VF inactive until FLRed. The driver in the VM has to ne upgraded [no real way to overcome this], but due to the HW attention currently arising upgrading the driver in the VM would not suffice [since the VF needs also be FLRed if the previous driver was already loaded]. This patch causes the PF to fail the acquire message from a VF running an old problematic driver; The VF will then gracefully fail it's probe preventing the HW attention [and allow clean upgrade of driver in VM]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01bnx2x: enlarge minimal alignemnt of data offsetDmitry Kravkov
This improves the performance of driver on machine with L1_CACHE_SHIFT of at most 32 bytes [HW was planned for 64-byte aligned fastpath data]. Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01bnx2x: VF can report link speedDmitry Kravkov
Until now VFs were oblvious to the actual configured link parameters. This patch does 2 things: 1. It enables a PF to inform its VF using the bulletin board of the link configured, and allows the VF to present that information. 2. It adds support of `ndo_set_vf_link_state', allowing the hypervisor to set the VF link state. Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01bnx2x: fix possible panic under memory stressEric Dumazet
While it is legal to kfree(NULL), it is not wise to use : put_page(virt_to_head_page(NULL)) BUG: unable to handle kernel paging request at ffffeba400000000 IP: [<ffffffffc01f5928>] virt_to_head_page+0x36/0x44 [bnx2x] Reported-by: Michel Lespinasse <walken@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Fixes: d46d132cc021 ("bnx2x: use netdev_alloc_frag()") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-26bnx2x: Fix the MSI flagsYijing Wang
MSI-X should use PCI_MSIX_FLAGS not PCI_MSI_FLAGS. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-19drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c: remove null test before kfreeFabian Frederick
Fix checkpatch warning: WARNING: kfree(NULL) is safe this check is probably not required Cc: Ariel Elior <ariele@broadcom.com> Cc: netdev@vger.kernel.org Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-12bnx2x: Enlarge the dorq threshold for VFsAriel Elior
A malicious VF might try to starve the other VFs & PF by creating contineous doorbell floods. In order to negate this, HW has a threshold of doorbells per client, which will stop the client doorbells from arriving if crossed. The threshold currently configured for VFs is too low - under extreme traffic scenarios, it's possible for a VF to reach the threshold and thus for its fastpath to stop working. Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12bnx2x: Check for UNDI in uncommon branchYuval Mintz
If L2FW utilized by the UNDI driver has the same version number as that of the regular FW, a driver loading after UNDI and receiving an uncommon answer from management will mistakenly assume the loaded FW matches its own requirement and try to exist the flow via FLR. Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12bnx2x: Fix 1G-baseT linkYaniv Rosner
Set the phy access mode even in case of link-flap avoidance. Signed-off-by: Yaniv Rosner <yaniv.rosner@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12bnx2x: Fix link for KR with swapped polarity laneYaniv Rosner
This avoids clearing the RX polarity setting in KR mode when polarity lane is swapped, as otherwise this will result in failed link. Signed-off-by: Yaniv Rosner <yaniv.rosner@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: include/net/inetpeer.h net/ipv6/output_core.c Changes in net were fixing bugs in code removed in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03bnx2x: Fix kernel crash and data miscompare after EEH recoverywenxiong@linux.vnet.ibm.com
A rmb() is required to ensure that the CQE is not read before it is written by the adapter DMA. PCI ordering rules will make sure the other fields are written before the marker at the end of struct eth_fast_path_rx_cqe but without rmb() a weakly ordered processor can process stale data. Without the barrier we have observed various crashes including bnx2x_tpa_start being called on queues not stopped (resulting in message start of bin not in stop) and NULL pointer exceptions from bnx2x_rx_int. Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03bnx2x: Adapter not recovery from EEH error injectionwenxiong@linux.vnet.ibm.com
When injecting EEH error to bnx2x adapter, adapter couldn't be recovery and caused recursive EEH errors. The patch fixes the issue. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core locking updates from Ingo Molnar: "The main changes in this cycle were: - reduced/streamlined smp_mb__*() interface that allows more usecases and makes the existing ones less buggy, especially in rarer architectures - add rwsem implementation comments - bump up lockdep limits" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) rwsem: Add comments to explain the meaning of the rwsem's count field lockdep: Increase static allocations arch: Mass conversion of smp_mb__*() arch,doc: Convert smp_mb__*() arch,xtensa: Convert smp_mb__*() arch,x86: Convert smp_mb__*() arch,tile: Convert smp_mb__*() arch,sparc: Convert smp_mb__*() arch,sh: Convert smp_mb__*() arch,score: Convert smp_mb__*() arch,s390: Convert smp_mb__*() arch,powerpc: Convert smp_mb__*() arch,parisc: Convert smp_mb__*() arch,openrisc: Convert smp_mb__*() arch,mn10300: Convert smp_mb__*() arch,mips: Convert smp_mb__*() arch,metag: Convert smp_mb__*() arch,m68k: Convert smp_mb__*() arch,m32r: Convert smp_mb__*() arch,ia64: Convert smp_mb__*() ...
2014-06-02Merge branch 'ethtool-rssh-fixes' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/net-next Ben Hutchings says: ==================== Pull request: Fixes for new ethtool RSS commands This addresses several problems I previously identified with the new ETHTOOL_{G,S}RSSH commands: 1. Missing validation of reserved parameters 2. Vague documentation 3. Use of unnamed magic number 4. No consolidation with existing driver operations I don't currently have access to suitable network hardware, but have tested these changes with a dummy driver that can support various combinations of operations and sizes, together with (a) Debian's ethtool 3.13 (b) ethtool 3.14 with the submitted patch to use ETHTOOL_{G,S}RSSH and minor adjustment for fixes 1 and 3. v2: Update RSS operations in vmxnet3 too ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03ethtool: Replace ethtool_ops::{get,set}_rxfh_indir() with {get,set}_rxfh()Ben Hutchings
ETHTOOL_{G,S}RXFHINDIR and ETHTOOL_{G,S}RSSH should work for drivers regardless of whether they expose the hash key, unless you try to set a hash key for a driver that doesn't expose it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-02bnx2x: Remove useless return variablesPeter Senna Tschudin
This patch remove variables that are initialized with a constant, are never updated, and are only used as parameter of return. Return the constant instead of using a variable. Verified by compilation only. The coccinelle script that find and fixes this issue is: // <smpl> @@ type T; constant C; identifier ret; @@ - T ret = C; ... when != ret when strict return - ret + C ; // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30bnx2x: update MAINTAINERS for bnx2x and e-mail addressesAriel Elior
The bnx2x development team has transferred from Broadcom to Qlogic. This patch updates some obsolete email addresses to usable ones. The bnx2x files contain headers with legal information from Broadcom. Qlogic Legal depratment is taking their time coming up with their own legal info. So this patch only updates contact information. I will follow up with a patch for the headers once I have the required info. Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate ↵Sucheta Chakraborty
through ip tool. o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-18bnx2x: Convert return 0 to return rcJoe Perches
These "return 0;" uses seem wrong as there are rc variables where error return values are set but unused. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13bnx2x: fix build when BNX2X_SRIOV is not enabledRandy Dunlap
Fix build when BNX2X_SRIOV is not enabled. Change one parameter struct from bnx2 to bnx2x and don't return a value from a void function. drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h:576:48: warning: 'struct bnx2' declared inside parameter list [enabled by default] drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h:576:48: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h:576:60: warning: 'return' with a value, in function returning void [enabled by default] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09bnx2x: Fix UNDI driver unloadYuval Mintz
Commit 91ebb928b "bnx2x: Add support for Multi-Function UNDI" contains a bug which prevent the emptying of the device's Rx buffers before reset. As a result, on new boards it is likely HW will reach some fatal assertion once its interfaces load after UNDI was previously loaded. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26bnx2x: Fix failure to configure VF multicast filtersNarender Kumar
Commit 2dc33bbc "bnx2x: Remove the sriov VFOP mechanism" caused a regression, preventing VFs from configuring multicast filters. Signed-off-by: Naredner Kumar <narender.kumar@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26bnx2x: Fix vlan credit issues for VFsYuval Mintz
Starting with commit 2dc33bbc "bnx2x: Remove the sriov VFOP mechanism", the bnx2x started enforcing vlan credits for all vlan configurations. This exposed 2 issues: - Vlan credits are not returned once a VF is removed; this causes a leak of credits, and eventually will lead to VFs with no vlan credits. - A vlan credit must be set aside for the Hypervisor to use, and should not be visible to the VF. Although linux VFs at the moment do not support vlan configuration [from the VF side] which causes them to be resilient to this sort of issue, Windows VF over linux hypervisors might fail to load as the vlan credits become depleted. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26bnx2x: Memory leak during VF removalYuval Mintz
When removing a VF interface, the driver fails to release that VF's mailbox and bulletin board allocated memory. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-03net: bnx2x: include irq.h for irqreturn_t definitionsJosh Boyer
The bnx2x driver fails to build on ARM with: In file included from drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c:28:0: drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h:243:1: error: unknown type name 'irqreturn_t' irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance); ^ drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h:251:1: error: unknown type name 'irqreturn_t' irqreturn_t bnx2x_interrupt(int irq, void *dev_instance); ^ Nothing in bnx2x_link.c or bnx2x_cmn.h is explicitly including the irq definitions, so we add an include of linux/irq.h to pick them up. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28bnx2x: Fix possible memory leak on iov error flowYuval Mintz
Commit 2dc33bbc4 "bnx2x: Remove the sriov VFOP mechanism" introduced a possible memory leak on the error flow during multicast filters configuration. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27bnx2x: Fix compilation when CONFIG_BNX2X_SRIOV is not setYuval Mintz
Commit 370d4a26 "bnx2x: Create workqueue for IOV related tasks" breaks bnx2x compilation when CONFIG_BNX2X_SRIOV is not set - "multiple definition of `bnx2x_schedule_iov_task'". Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25bnx2x: Don't allow VFs to become promiscuousYuval Mintz
Currently, if a VF's Rx Mode will be configured to support promiscuous mode the PF will comply, causing the VF to actually become promiscuous. This will enable the VF to see all unicast traffic which might be intended for other VMs, which we believe should not be possible. This patch will cause the hypervisor to ignore the VF's request for changes in its Rx mode (other than disabling it), preventing it from becoming promiscuous. Reported-by: Yoann Juet <yoann.juet@univ-nantes.fr> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25bnx2x: Don't show port statistics for VFsYuval Mintz
VFs are currently showing port statistics, although they can't really access those - thus all such statistics will always show a value of 0. This patch removes said statistics from the VF's view as to not confuse the user. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25bnx2x: Remove the sriov VFOP mechanismYuval Mintz
Since we now posses a workqueue dedicated for sriov, the paradigm that sriov- related tasks cannot sleep is no longer correct. The VFOP mechanism was the one previously supporting said paradigm - the sriov related tasks were broken into segments which did not require sleep, and the mechanism re-scheduled the next segment whenever possible. This patch remvoes the VFOP mechanism altogether - the resulting code is a much easier to follow code; The segments are gathered into straight-forward functions which sleep whenever neccessary. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25bnx2x: Create workqueue for IOV related tasksYuval Mintz
The bnx2x sriov mechanisms were done in the bnx2x slowpath workitem which runs on the bnx2x's workqueue; This workitem is also responsible for the bottom half of interrupt handling in the driver, and specifically it also receives FW notifications of ramrod completions, allowing other flows to progress. The original design of the sriov reltaed-flows was based on the notion such flows must not sleep, since their context is the slowpath workitem. Otherwise, we might reach timeouts - those flows may wait for ramrod completion that will never arrive as the workitem wlll not be re-scheduled until that same flow will be over. In more recent time bnx2x started supporting features in which the VF interface can be configured by the tools accessing the PF on the hypervisor. This support created possible races on the VF-PF lock (which is taken either when the PF is handling a VF message or when the PF is doing some slowpath work on behalf of the VF) which may cause timeouts on the VF side and lags on the PF side. This patch changes the scheme - it creates a new workqueue for sriov related tasks and moves all handling currently done in the slowpath task into the the new workqueue. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25bnx2x: Support mng. request for driver versionYuval Mintz
This adds support in a new management feature which needs the driver versions (bnx2x, bnx2fc and bnx2i) loaded for each interface. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14bnx2x: Don't receive packets when the napi budget == 0Eric W. Biederman
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27bnx2x: Add missing bit in default Tx switchingYuval Mintz
Commit c14db2025 "bnx2x: Correct default Tx switching behaviour" supposedly changed the default Tx switching behaviour, but was missing the fastpath change required for FW to pass packets from PFs to VFs. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26bnx2x: save RAM in kdump kernel by disabling TPAMichal Schmidt
When running in a kdump kernel, disable TPA. This saves memory, which tends to be scarce in kdump. TPA, being a receive acceleration, is unlikely to be useful for kdump, whose purpose is to send the memory image out. This saves additional 5 MB in the kdump environment. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26bnx2x: save RAM in kdump kernel by using a single queueMichal Schmidt
When running in a kdump kernel, make sure to use only a single ethernet queue even if a num_queues option in /etc/modprobe.d/*.conf would specify otherwise. This saves memory, which tends to be scarce in kdump. This saves about 40 MB in the kdump environment on a setup with num_queues=8 in the config file. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26bnx2x: clamp num_queues to prevent passing a negative valueMichal Schmidt
Use the clamp() macro to make the calculation of the number of queues slightly easier to understand. It also avoids a crash when someone accidentally passes a negative value in num_queues= module parameter. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25bnx2x: Remove hidden flow control goto from BNX2X_ALLOC macrosJoe Perches
BNX2X_ALLOC macros use "goto alloc_mem_err" so these labels appear unused in some functions. Expand these macros in-place via coccinelle and some typing. Update the macros to use statement expressions and remove the BNX2X_ALLOC macro. This adds some > 80 char lines. $ cat bnx2x_pci_alloc.cocci @@ expression e1; expression e2; expression e3; @@ - BNX2X_PCI_ALLOC(e1, e2, e3); + e1 = BNX2X_PCI_ALLOC(e2, e3); if (!e1) goto alloc_mem_err; @@ expression e1; expression e2; expression e3; @@ - BNX2X_PCI_FALLOC(e1, e2, e3); + e1 = BNX2X_PCI_FALLOC(e2, e3); if (!e1) goto alloc_mem_err; @@ expression e1; expression e2; @@ - BNX2X_ALLOC(e1, e2); + e1 = kzalloc(e2, GFP_KERNEL); if (!e1) goto alloc_mem_err; @@ expression e1; expression e2; expression e3; @@ - kzalloc(sizeof(e1) * e2, e3) + kcalloc(e2, sizeof(e1), e3) @@ expression e1; expression e2; expression e3; @@ - kzalloc(e1 * sizeof(e2), e3) + kcalloc(e1, sizeof(e2), e3) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-16 04:17:13 +0000