summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cadence
AgeCommit message (Collapse)Author
2018-11-10net: macb: Clean 64b dma addresses if they are not detectedMichal Simek
[ Upstream commit e1e5d8a9fe737d94ccc0ccbaf0c97f69a8f3e000 ] Clear ADDR64 dma bit in DMACFG register in case that HW_DMA_CAP_64B is not detected on 64bit system. The issue was observed when bootloader(u-boot) does not check macb feature at DCFG6 register (DAW64_OFFSET) and enabling 64bit dma support by default. Then macb driver is reading DMACFG register back and only adding 64bit dma configuration but not cleaning it out. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-18net: macb: disable scatter-gather for macb on sama5d3Nicolas Ferre
[ Upstream commit eb4ed8e2d7fecb5f40db38e4498b9ee23cddf196 ] Create a new configuration for the sama5d3-macb new compatibility string. This configuration disables scatter-gather because we experienced lock down of the macb interface of this particular SoC under very high load. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10net: cadence: Fix a sleep-in-atomic-context bug in macb_halt_tx()Jia-Ju Bai
[ Upstream commit 16fe10cf92783ed9ceb182d6ea2b8adf5e8ec1b8 ] The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] usleep_range drivers/net/ethernet/cadence/macb_main.c, 648: usleep_range in macb_halt_tx drivers/net/ethernet/cadence/macb_main.c, 730: macb_halt_tx in macb_tx_error_task drivers/net/ethernet/cadence/macb_main.c, 721: _raw_spin_lock_irqsave in macb_tx_error_task To fix this bug, usleep_range() is replaced with udelay(). This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29net: macb: ensure ordering write to re-enable RX smoothlyZumeng Chen
When a hardware issue happened as described by inline comments, the register write pattern looks like the following: <write ~MACB_BIT(RE)> + wmb(); <write MACB_BIT(RE)> There might be a memory barrier between these two write operations, so add wmb to ensure an flip from 0 to 1 for NCR. Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29net: macb: fix the RX queue reset in macb_rx()Cyrille Pitchen
On macb only (not gem), when a RX queue corruption was detected from macb_rx(), the RX queue was reset: during this process the RX ring buffer descriptor was initialized by macb_init_rx_ring() but we forgot to also set bp->rx_tail to 0. Indeed, when processing the received frames, bp->rx_tail provides the macb driver with the index in the RX ring buffer of the next buffer to process. So when the whole ring buffer is reset we must also reset bp->rx_tail so the driver is synchronized again with the hardware. Since macb_init_rx_ring() is called from many locations, currently from macb_rx() and macb_init_rings(), we'd rather add the "bp->rx_tail = 0;" line inside macb_init_rx_ring() than add the very same line after each call of this function. Without this fix, the rx queue is not reset properly to recover from queue corruption and connection drop may occur. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Fixes: 9ba723b081a2 ("net: macb: remove BUG_ON() and reset the queue to handle RX errors") Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-19net: macb: add check for dma mapping error in start_xmit()Alexey Khoroshilov
at91ether_start_xmit() does not check for dma mapping errors. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-07net: macb: NULL out phydev after removing mdio busNathan Sullivan
To ensure the dev->phydev pointer is not used after becoming invalid in mdiobus_unregister, set it to NULL. This happens when removing the macb driver without first taking its interface down, since unregister_netdev will end up calling macb_close. Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Brad Mouring <brad.mouring@ni.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13net: macb: fix missing unlock on error in macb_start_xmit()Wei Yongjun
Fix missing unlock before return from function macb_start_xmit() in the error handling case. Fixes: 007e4ba3ee13 ("net: macb: initialize checksum when using checksum offloading") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06net: macb: initialize checksum when using checksum offloadingHelmut Buchsbaum
I'm still struggling to get this fix right.. Changes since v2: - do not blindly modify SKB contents according to Dave's legitimate objection Changes since v1: - dropped disabling HW checksum offload for Zynq - initialize checksum similar to net/ethernet/freescale/fec_main.c -- >8 -- MACB/GEM needs the checksum field initialized to 0 to get correct results on transmit in all cases, e.g. on Zynq, UDP packets with payload <= 2 otherwise contain a wrong checksums. Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18net: ethernet: macb: Add support for rx_clkshubhrajyoti.datta@xilinx.com
Some of the platforms like zynqmp ultrascale+ has a separate clock gate for the rx clock. Add an optional rx_clk so that the clock can be enabled. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14net: macb: add missing free_netdev() on error in macb_probe()Wei Yongjun
Add the missing free_netdev() before return from function macb_probe() in the platform_get_irq() error handling case. Fixes: c69618b3e4f2 ("net/macb: fix probe sequence to setup clocks earlier") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10net: macb: Add 64 bit addressing support for GEMHarini Katakam
This patch adds support for 64 bit addressing and BDs. -> Enable 64 bit addressing in DMACFG register. -> Set DMA mask when design config register shows support for 64 bit addr. -> Add new BD words for higher address when 64 bit DMA support is present. -> Add and update TBQPH and RBQPH for MSB of BD pointers. -> Change extraction and updation of buffer addresses to use 64 bit address. -> In gem_rx extract address in one place insted of two and use a separate flag for RXUSED. Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06net: macb: Correct CAPS maskHarini Katakam
USRIO and JUMBO CAPS have the same mask. Fix the same. Fixes: ce721a702197 ("net: ethernet: cadence-macb: Add disabled usrio caps") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Harini Katakam <harinik@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-25net: ethernet: macb: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-25net: ethernet: macb: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03net: macb: Probe MDIO bus before registering netdevFlorian Fainelli
The current sequence makes us register for a network device prior to registering and probing the MDIO bus which could lead to some unwanted consequences, like a thread of execution calling into ndo_open before register_netdev() returns, while the MDIO bus is not ready yet. Rework the sequence to register for the MDIO bus, and therefore attach to a PHY prior to calling register_netdev(), which implies reworking the error path a bit. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03macb: fix mdiobus_scan() error checkSergei Shtylyov
Now mdiobus_scan() returns ERR_PTR(-ENODEV) instead of NULL if the PHY device ID was read as all ones. As this was not an error before, this value should be filtered out now in this driver. Fixes: b74766a0a0fe ("phylib: don't return NULL from get_phy_device()") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04net: macb: Fix simple typoMoritz Fischer
Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04net: macb: Use ether_addr_copy over memcpyMoritz Fischer
Checkpatch suggests using ether_addr_copy over memcpy to copy the mac address. Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04net: macb: Fix coding style suggestionsMoritz Fischer
This commit deals with a bunch of checkpatch suggestions that without changing behavior make checkpatch happier. Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04net: macb: Fix coding style warningsMoritz Fischer
This commit takes care of the coding style warnings that are mostly due to a different comment style and lines over 80 chars, as well as a dangling else. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04net: macb: Fix coding style error messageMoritz Fischer
checkpatch.pl gave the following error: ERROR: space required before the open parenthesis '(' + for(; p < end; p++, offset += 4) Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-28net: macb: Only call GPIO functions if there is a valid GPIOCharles Keepax
GPIOlib will print warning messages if we call GPIO functions without a valid GPIO. Change the code to avoid doing so. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-25net: macb: remove BUG_ON() and reset the queue to handle RX errorsCyrille Pitchen
This patch removes two BUG_ON() used to notify about RX queue corruptions on macb (not gem) hardware without actually handling the error. The new code skips corrupted frames but still processes faultless frames. Then it resets the RX queue before restarting the reception from a clean state. This patch is a rework of an older patch proposed by Neil Armstrong: http://patchwork.ozlabs.org/patch/371525/ Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-24net: macb: replace macb_writel() call by queue_writel() to update queue ISRCyrille Pitchen
macb_interrupt() should not use macb_writel(bp, ISR, <value>) but only queue_writel(queue, ISR, <value>). There is one IRQ and one set of {ISR, IER, IDR, IMR} [1] registers per queue on gem hardware, though only queue0 is actually used for now to receive frames: other queues can already be used to transmit frames. The queue_readl() and queue_writel() helper macros are designed to access the relevant IRQ registers. [1] ISR: Interrupt Status Register IER: Interrupt Enable Register IDR: Interrupt Disable Register IMR: Interrupt Mask Register Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Fixes: bfbb92c44670 ("net: macb: Handle the RXUBR interrupt on all devices") Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-22macb: fix PHY resetSergei Shtylyov
The driver calls gpiod_set_value() with GPIOD_OUT_* instead of 0 and 1, as a result the PHY isn't really put back into reset state in macb_remove(). Moreover, the driver assumes that something else has set the GPIO direction to output, so if it has not, the PHY may not be taken out of reset in macb_probe() either... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13net: macb: fix default configuration for GMAC on AT91Nicolas Ferre
On AT91 SoCs, the User Register (USRIO) exposes a switch to configure the "Reduced" or "Traditional" version of the Media Independent Interface (RMII vs. MII or RGMII vs. GMII). As on the older EMAC version, on GMAC, this switch is set by default to the non-reduced type of interface, so use the existing capability and extend it to GMII as well. We then keep the current logic in the macb_init() function. The capabilities of sama5d2, sama5d4 and sama5d3 GEM interface are updated in the macb_config structure to be able to properly enable them with a traditional interface (GMII or MII). Reported-by: Romain HENRIET <romain.henriet@l-acoustics.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19net: macb: make magic-packet property genericSergio Prado
As requested by Rob Herring on patch https://patchwork.ozlabs.org/patch/580862/. This is a new property that it's still in net-next and has never been used in production, so we are not breaking anything with the incompatible binding change. Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: macb: add wake-on-lan support via magic packetSergio Prado
Tested on Acqua A5 SoM (http://www.acmesystems.it/acqua). Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: macb: fix build warningSudip Mukherjee
We are getting build warning about: macb.c:2889:13: warning: 'tx_clk' may be used uninitialized in this function macb.c:2888:11: warning: 'hclk' may be used uninitialized in this function In reality they are not used uninitialized as clk_init() will initialize them, this patch will just silence the warning. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15net: macb: clear interrupts when disabling themNathan Sullivan
Disabling interrupts with the IDR register does not stop the macb hardware from asserting its interrupt line if there are interrupts pending. Always clear the interrupts using ISR, and be sure to write it on hardware that is not read-to-clear, like Zynq. Not doing so will cause interrupts when the driver doesn't expect them. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: macb: Add NP4 macb config using USRIO_DISABLEDNeil Armstrong
Declare a new NP4 SoC variant having USRIO_DISABLED as capability bit. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: ethernet: cadence-macb: Add disabled usrio capsNeil Armstrong
On some platforms, the macb integration does not use the USRIO register to configure the (R)MII port and clocks. When the register is not implemented and the MACB error signal is connected to the bus error, reading or writing to the USRIO register can trigger some Imprecise External Aborts on ARM platforms. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralise print about attached phyAndrew Lunn
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: add phydev_name() wrapperAndrew Lunn
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17net/macb: Update device tree binding for resetting PHY using GPIOGregory CLEMENT
Instead of being at the MAC level the reset gpio preperty is moved at the PHY child node level. It is still managed by the MAC, but from the point of view of the binding it make more sense to be part of the PHY node. This commit also fixes a build errors if GPIOLIB is not selected. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14net/macb: add support for resetting PHY using GPIOGregory CLEMENT
With device tree it is no more possible to reset the PHY at board level. Furthermore, doing in the driver allow to power down the PHY when the network interface is no more used. This reset can't be done at the PHY driver level. The PHY must be able to answer the to the mii bus scan to let the kernel creating a PHY device. The patch introduces a new optional property "phy-reset-gpios" inspired from the one use for the FEC. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18net: macb: Add support for sgmii phy interfacePunnaiah Choudary Kalluri
This patch adds support for the sgmii phy interface. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/s390/net/bpf_jit_comp.c drivers/net/ethernet/ti/netcp_ethss.c net/bridge/br_multicast.c net/ipv4/ip_fragment.c All four conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27macb: Fix build with macro'ized readl/writel.David S. Miller
If an architecture defines readl/writel using CPP macros, we get the following kinds of build failure: > > > drivers/net/ethernet/cadence/macb.c:164:1: error: macro "writel" > > > passed 3 arguments, but takes just 2 > macb_or_gem_writel(bp, SA1B, bottom); > ^ Rename the methods so that this doesn't happen. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net/macb: replace macb_count_tx_descriptors() by DIV_ROUND_UP()Andy Shevchenko
macb_count_tx_descriptors() repeats the generic macro DIV_ROUND_UP(). The patch does a replacement. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net/macb: suppress compiler warningsAndy Shevchenko
This patch fixes the following warnings: drivers/net/ethernet/cadence/macb.c: In function ‘macb_handle_link_change’: drivers/net/ethernet/cadence/macb.c:266: warning: comparison between signed and unsigned drivers/net/ethernet/cadence/macb.c:267: warning: comparison between signed and unsigned drivers/net/ethernet/cadence/macb.c:291: warning: comparison between signed and unsigned drivers/net/ethernet/cadence/macb.c: In function ‘gem_update_stats’: drivers/net/ethernet/cadence/macb.c:1908: warning: comparison between signed and unsigned drivers/net/ethernet/cadence/macb.c: In function ‘gem_get_ethtool_strings’: drivers/net/ethernet/cadence/macb.c:1988: warning: comparison between signed and unsigned Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net/macb: use dev_*() when netdev is not yet registeredAndy Shevchenko
To avoid messages like macb macb.0 (unnamed net_device) (uninitialized): Cadence caps 0x00000000 macb macb.0 (unnamed net_device) (uninitialized): invalid hw address, using random let's use dev_*() macros. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net/macb: check if macb_config presentAndy Shevchenko
The commit 98b5a0f4a228 introduces jumbo frame support, but also it assumes that macb_config present which is not always true. The configuration without macb_config fails to boot. Unable to handle kernel NULL pointer dereference at virtual address 00000010 ptbr = 90350000 pgd = 00000000 Oops: Kernel access of bad area, sig: 11 [#1] FRAME_POINTER chip: 0x01f:0x1e82 rev 2 Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.2.0-rc3-next-20150723+ #13 task: 91c26000 ti: 91c28000 task.ti: 91c28000 PC is at macb_probe+0x140/0x61c Fixes: 98b5a0f4a228 (net: macb: Add support for jumbo frames) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net/macb: improve big endian CPU supportAndy Shevchenko
The commit a50dad355a53 (net: macb: Add big endian CPU support) converted I/O accessors to readl_relaxed() and writel_relaxed() and consequentially broke MACB driver on AVR32 platforms such as ATNGW100. This patch improves I/O access by checking endiannes first and use the corresponding methods. Fixes: a50dad355a53 (net: macb: Add big endian CPU support) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-26net: macb: Change capability mask for jumbo supportHarini Katakam
JUMBO and NO_GIGABIT_HALF have the same capability masks. Change one of them. Signed-off-by: Harini Katakam <harinik@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08net: macb: Add SG support for Zynq SOC familyPunnaiah Choudary Kalluri
Enable SG support for Zynq SOC family devices. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-05 23:12:16 +0000