summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox/mlx4
AgeCommit message (Collapse)Author
2019-03-19net/mlx4_core: Fix qp mtt size calculationJack Morgenstein
[ Upstream commit 8511a653e9250ef36b95803c375a7be0e2edb628 ] Calculation of qp mtt size (in function mlx4_RST2INIT_wrapper) ultimately depends on function roundup_pow_of_two. If the amount of memory required by the QP is less than one page, roundup_pow_of_two is called with argument zero. In this case, the roundup_pow_of_two result is undefined. Calling roundup_pow_of_two with a zero argument resulted in the following stack trace: UBSAN: Undefined behaviour in ./include/linux/log2.h:61:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 4 PID: 26939 Comm: rping Tainted: G OE 4.19.0-rc1 Hardware name: Supermicro X9DR3-F/X9DR3-F, BIOS 3.2a 07/09/2015 Call Trace: dump_stack+0x9a/0xeb ubsan_epilogue+0x9/0x7c __ubsan_handle_shift_out_of_bounds+0x254/0x29d ? __ubsan_handle_load_invalid_value+0x180/0x180 ? debug_show_all_locks+0x310/0x310 ? sched_clock+0x5/0x10 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x260 ? find_held_lock+0x35/0x1e0 ? mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core] mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core] Fix this by explicitly testing for zero, and returning one if the argument is zero (assuming that the next higher power of 2 in this case should be one). Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19net/mlx4_core: Fix locking in SRIOV mode when switching between events and ↵Jack Morgenstein
polling [ Upstream commit c07d27927f2f2e96fcd27bb9fb330c9ea65612d0 ] In procedures mlx4_cmd_use_events() and mlx4_cmd_use_polling(), we need to guarantee that there are no FW commands in progress on the comm channel (for VFs) or wrapped FW commands (on the PF) when SRIOV is active. We do this by also taking the slave_cmd_mutex when SRIOV is active. This is especially important when switching from event to polling, since we free the command-context array during the switch. If there are FW commands in progress (e.g., waiting for a completion event), the completion event handler will access freed memory. Since the decision to use comm_wait or comm_poll is taken before grabbing the event_sem/poll_sem in mlx4_comm_cmd_wait/poll, we must take the slave_cmd_mutex as well (to guarantee that the decision to use events or polling and the call to the appropriate cmd function are atomic). Fixes: a7e1f04905e5 ("net/mlx4_core: Fix deadlock when switching between polling and event fw commands") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19net/mlx4_core: Fix reset flow when in command polling modeJack Morgenstein
[ Upstream commit e15ce4b8d11227007577e6dc1364d288b8874fbe ] As part of unloading a device, the driver switches from FW command event mode to FW command polling mode. Part of switching over to polling mode is freeing the command context array memory (unfortunately, currently, without NULLing the command context array pointer). The reset flow calls "complete" to complete all outstanding fw commands (if we are in event mode). The check for event vs. polling mode here is to test if the command context array pointer is NULL. If the reset flow is activated after the switch to polling mode, it will attempt (incorrectly) to complete all the commands in the context array -- because the pointer was not NULLed when the driver switched over to polling mode. As a result, we have a use-after-free situation, which results in a kernel crash. For example: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: netconsole nfsv3 nfs_acl nfs lockd grace ... CPU: 2 PID: 940 Comm: kworker/2:3 Kdump: loaded Not tainted 3.10.0-862.el7.x86_64 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016 Workqueue: events hv_eject_device_work [pci_hyperv] task: ffff8d1734ca0fd0 ti: ffff8d17354bc000 task.ti: ffff8d17354bc000 RIP: 0010:[<ffffffff876c4a8e>] [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90 RSP: 0018:ffff8d17354bfa38 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff8d17362d42c8 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8d17362d42c8 RBP: ffff8d17354bfa70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000298 R11: ffff8d173610e000 R12: ffff8d17362d42d0 R13: 0000000000000246 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8d1802680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000f16d8000 CR4: 00000000001406e0 Call Trace: [<ffffffff876c7adc>] complete+0x3c/0x50 [<ffffffffc04242f0>] mlx4_cmd_wake_completions+0x70/0x90 [mlx4_core] [<ffffffffc041e7b1>] mlx4_enter_error_state+0xe1/0x380 [mlx4_core] [<ffffffffc041fa4b>] mlx4_comm_cmd+0x29b/0x360 [mlx4_core] [<ffffffffc041ff51>] __mlx4_cmd+0x441/0x920 [mlx4_core] [<ffffffff877f62b1>] ? __slab_free+0x81/0x2f0 [<ffffffff87951384>] ? __radix_tree_lookup+0x84/0xf0 [<ffffffffc043a8eb>] mlx4_free_mtt_range+0x5b/0xb0 [mlx4_core] [<ffffffffc043a957>] mlx4_mtt_cleanup+0x17/0x20 [mlx4_core] [<ffffffffc04272c7>] mlx4_free_eq+0xa7/0x1c0 [mlx4_core] [<ffffffffc042803e>] mlx4_cleanup_eq_table+0xde/0x130 [mlx4_core] [<ffffffffc0433e08>] mlx4_unload_one+0x118/0x300 [mlx4_core] [<ffffffffc0434191>] mlx4_remove_one+0x91/0x1f0 [mlx4_core] The fix is to set the command context array pointer to NULL after freeing the array. Fixes: f5aef5aa3506 ("net/mlx4_core: Activate reset flow upon fatal command cases") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27net/mlx4_en: Force CHECKSUM_NONE for short ethernet framesSaeed Mahameed
[ Upstream commit 29dded89e80e3fff61efb34f07a8a3fba3ea146d ] When an ethernet frame is padded to meet the minimum ethernet frame size, the padding octets are not covered by the hardware checksum. Fortunately the padding octets are usually zero's, which don't affect checksum. However, it is not guaranteed. For example, switches might choose to make other use of these octets. This repeatedly causes kernel hardware checksum fault. Prior to the cited commit below, skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, we need to keep skb->csum updated. However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP headers, it does not worth the effort as the packets are so small that CHECKSUM_COMPLETE has no significant advantage. Future work: when reporting checksum complete is not an option for IP non-TCP/UDP packets, we can actually fallback to report checksum unnecessary, by looking at cqe IPOK bit. Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06net/mlx4_core: Add masking for a few queries on HCA capsAya Levin
[ Upstream commit a40ded6043658444ee4dd6ee374119e4e98b33fc ] Driver reads the query HCA capabilities without the corresponding masks. Without the correct masks, the base addresses of the queues are unaligned. In addition some reserved bits were wrongly read. Using the correct masks, ensures alignment of the base addresses and allows future firmware versions safe use of the reserved bits. Fixes: ab9c17a009ee ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet") Fixes: 0ff1fb654bec ("{NET, IB}/mlx4: Add device managed flow steering firmware API") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21net/mlx4_en: Fix build break when CONFIG_INET is offSaeed Mahameed
[ Upstream commit 1b603f9e4313348608f256b564ed6e3d9e67f377 ] MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs. Make sure they are listed in MLX4_EN Kconfig dependencies. This fixes the following build break: drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default] struct iphdr *iph) ^ drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’: drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type _u8 ipproto = iph->protocol; Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17net/mlx4_core: Correctly set PFC param if global pause is turned off.Tarick Bedeir
[ Upstream commit bd5122cd1e0644d8bd8dd84517c932773e999766 ] rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1. Fixes: 6e8814ceb7e8 ("net/mlx4_en: Fix mixed PFC and Global pause user control requests") Signed-off-by: Tarick Bedeir <tarick@google.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13net/mlx4: Fix UBSAN warning of signed integer overflowAya Levin
[ Upstream commit a463146e67c848cbab5ce706d6528281b7cded08 ] UBSAN: Undefined behavior in drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29 signed integer overflow: 1802201963 + 1802201963 cannot be represented in type 'int' The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors granting of reserved resources. The grant operation is calculated and protected, thus both members of the union cannot be negative. Changed type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed int to unsigned int, allowing large value. Fixes: 5a0d0a6161ae ("mlx4: Structures and init/teardown for VF resource quotas") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13net/mlx4_core: Fix uninitialized variable compilation warningTariq Toukan
[ Upstream commit 3ea7e7ea53c9f6ee41cb69a29c375fe9dd9a56a7 ] Initialize the uid variable to zero to avoid the compilation warning. Fixes: 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13net/mlx4_core: Zero out lkey field in SW2HW_MPT fw commandJack Morgenstein
[ Upstream commit bd85fbc2038a1bbe84990b23ff69b6fc81a32b2c ] When re-registering a user mr, the mpt information for the existing mr when running SRIOV is obtained via the QUERY_MPT fw command. The returned information includes the mpt's lkey. This retrieved mpt information is used to move the mpt back to hardware ownership in the rereg flow (via the SW2HW_MPT fw command when running SRIOV). The fw API spec states that for SW2HW_MPT, the lkey field must be zero. Any ConnectX-3 PF driver which checks for strict spec adherence will return failure for SW2HW_MPT if the lkey field is not zero (although the fw in practice ignores this field for SW2HW_MPT). Thus, in order to conform to the fw API spec, set the lkey field to zero before invoking SW2HW_MPT when running SRIOV. Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-20net/mlx4: Use cpumask_available for eq->affinity_maskNathan Chancellor
[ Upstream commit 8ac1ee6f4d62e781e3b3fd8b9c42b70371427669 ] Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of array 'eq->affinity_mask' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask)) ~~~~~^~~~~~~~~~~~~ 1 warning generated. Use cpumask_available, introduced in commit f7e30f01a9e2 ("cpumask: Add helper cpumask_available()"), which does the proper checking and avoids this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/86 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-28net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapperJack Morgenstein
[ Upstream commit 958c696f5a7274d9447a458ad7aa70719b29a50a ] Function mlx4_RST2INIT_QP_wrapper saved the qp number passed in the qp context, rather than the one passed in the input modifier. However, the qp number in the qp context is not defined as a required parameter by the FW. Therefore, drivers may choose to not specify the qp number in the qp context for the reset-to-init transition. Thus, we must save the qp number passed in the command input modifier -- which is always present. (This saved qp number is used as the input modifier for command 2RST_QP when a slave's qp's are destroyed). Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13net/mlx4: Fix irq-unsafe spinlock usageJack Morgenstein
[ Upstream commit d546b67cda015fb92bfee93d5dc0ceadb91deaee ] spin_lock/unlock was used instead of spin_un/lock_irq in a procedure used in process space, on a spinlock which can be grabbed in an interrupt. This caused the stack trace below to be displayed (on kernel 4.17.0-rc1 compiled with Lock Debugging enabled): [ 154.661474] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [ 154.668909] 4.17.0-rc1-rdma_rc_mlx+ #3 Tainted: G I [ 154.675856] ----------------------------------------------------- [ 154.682706] modprobe/10159 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 154.690254] 00000000f3b0e495 (&(&qp_table->lock)->rlock){+.+.}, at: mlx4_qp_remove+0x20/0x50 [mlx4_core] [ 154.700927] and this task is already holding: [ 154.707461] 0000000094373b5d (&(&cq->lock)->rlock/1){....}, at: destroy_qp_common+0x111/0x560 [mlx4_ib] [ 154.718028] which would create a new lock dependency: [ 154.723705] (&(&cq->lock)->rlock/1){....} -> (&(&qp_table->lock)->rlock){+.+.} [ 154.731922] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 154.740798] (&(&cq->lock)->rlock){..-.} [ 154.740800] ... which became SOFTIRQ-irq-safe at: [ 154.752163] _raw_spin_lock_irqsave+0x3e/0x50 [ 154.757163] mlx4_ib_poll_cq+0x36/0x900 [mlx4_ib] [ 154.762554] ipoib_tx_poll+0x4a/0xf0 [ib_ipoib] ... to a SOFTIRQ-irq-unsafe lock: [ 154.815603] (&(&qp_table->lock)->rlock){+.+.} [ 154.815604] ... which became SOFTIRQ-irq-unsafe at: [ 154.827718] ... [ 154.827720] _raw_spin_lock+0x35/0x50 [ 154.833912] mlx4_qp_lookup+0x1e/0x50 [mlx4_core] [ 154.839302] mlx4_flow_attach+0x3f/0x3d0 [mlx4_core] Since mlx4_qp_lookup() is called only in process space, we can simply replace the spin_un/lock calls with spin_un/lock_irq calls. Fixes: 6dc06c08bef1 ("net/mlx4: Fix the check in attaching steering rules") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06net/mlx4_en: fix potential use-after-free with dma_unmap_pageSarah Newman
[ Not relevant upstream, therefore no upstream commit. ] To fix, unmap the page as soon as possible. When swiotlb is in use, calling dma_unmap_page means that the original page mapped with dma_map_page must still be valid, as swiotlb will copy data from its internal cache back to the originally requested DMA location. When GRO is enabled, before this patch all references to the original frag may be put and the page freed before dma_unmap_page in mlx4_en_free_frag is called. It is possible there is a path where the use-after-free occurs even with GRO disabled, but this has not been observed so far. The bug can be trivially detected by doing the following: * Compile the kernel with DEBUG_PAGEALLOC * Run the kernel as a Xen Dom0 * Leave GRO enabled on the interface * Run a 10 second or more test with iperf over the interface. This bug was likely introduced in commit 4cce66cdd14a ("mlx4_en: map entire pages to increase throughput"), first part of u3.6. It was incidentally fixed in commit 34db548bfb95 ("mlx4: add page recycling in receive path"), first part of v4.12. This version applies to the v4.9 series. Signed-off-by: Sarah Newman <srn@prgmr.com> Tested-by: Sarah Newman <srn@prgmr.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-25net/mlx4_core: Fix error handling in mlx4_init_port_info.Tarick Bedeir
[ Upstream commit 57f6f99fdad9984801cde05c1db68fe39b474a10 ] Avoid exiting the function with a lingering sysfs file (if the first call to device_create_file() fails while the second succeeds), and avoid calling devlink_port_unregister() twice. In other words, either mlx4_init_port_info() succeeds and returns zero, or it fails, returns non-zero, and requires no cleanup. Fixes: 096335b3f983 ("mlx4_core: Allow dynamic MTU configuration for IB ports") Signed-off-by: Tarick Bedeir <tarick@google.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-19net/mlx4_en: Verify coalescing parameters are in rangeMoshe Shemesh
[ Upstream commit 6ad4e91c6d796b38a7f0e724db1de28eeb122bad ] Add check of coalescing parameters received through ethtool are within range of values supported by the HW. Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the users through ethtool. The ethtool support up to 32 bit value for each. However, mlx4 modify cq limits the coalescing time parameter and coalescing frames parameters to 16 bits. Return out of range error if user tries to set these parameters to higher values. Change type of sample-interval and adaptive_rx_coal parameters in mlx4 driver to u32 as the ethtool holds them as u32 and these parameters are not limited due to mlx4 HW. Fixes: c27a02cd94d6 ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/mlx4_core: Fix memory leak while delete slave's resourcesMoshe Shemesh
[ Upstream commit 461d5f1b59490ce0096dfda45e10038c122a7892 ] mlx4_delete_all_resources_for_slave in resource tracker should free all memory allocated for a slave. While releasing memory of fs_rule, it misses releasing memory of fs_rule->mirr_mbox. Fixes: 78efed275117 ('net/mlx4_core: Support mirroring VF DMFS rules on both ports') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/mlx4_en: Fix mixed PFC and Global pause user control requestsEran Ben Elisha
[ Upstream commit 6e8814ceb7e8f468659ef9253bd212c07ae19584 ] Global pause and PFC configuration should be mutually exclusive (i.e. only one of them at most can be set). However, once PFC was turned off, driver automatically turned Global pause on. This is a bug. Fix the driver behaviour to turn off PFC/Global once the user turned the other on. This also fixed a weird behaviour that at a current time, the profile had both PFC and global pause configuration turned on, which is Hardware-wise impossible and caused returning false positive indication to query tools. In addition, fix error code when setting global pause or PFC to change metadata only upon successful change. Also, removed useless debug print. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/mlx4: Check if Granular QoS per VF has been enabled before updating QP ↵Ido Shamay
qos_vport [ Upstream commit 269f9883fe254d109afdfc657875c456d6fabb08 ] The Granular QoS per VF feature must be enabled in FW before it can be used. Thus, the driver cannot modify a QP's qos_vport value (via the UPDATE_QP FW command) if the feature has not been enabled -- the FW returns an error if this is attempted. Fixes: 08068cd5683f ("net/mlx4: Added qos_vport QP configuration in VST mode") Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/mlx4: Fix the check in attaching steering rulesTalat Batheesh
[ Upstream commit 6dc06c08bef1c746ff8da33dab677cfbacdcad32 ] Our previous patch (cited below) introduced a regression for RAW Eth QPs. Fix it by checking if the QP number provided by user-space exists, hence allowing steering rules to be added for valid QPs only. Fixes: 89c557687a32 ("net/mlx4_en: Avoid adding steering rules with invalid ring") Reported-by: Or Gerlitz <gerlitz.or@gmail.com> Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/mlx4_en: Change default QoS settingsMoni Shoua
[ Upstream commit a42b63c1ac1986f17f71bc91a6b0aaa14d4dae71 ] Change the default mapping between TC and TCG as follows: Prio | TC/TCG | from to | (set by FW) (set by SW) ---------+----------------------------------- 0 | 0/0 0/7 1 | 1/0 0/6 2 | 2/0 0/5 3 | 3/0 0/4 4 | 4/0 0/3 5 | 5/0 0/2 6 | 6/0 0/1 7 | 7/0 0/0 These new settings cause that a pause frame for any prio stops traffic for all prios. Fixes: 564c274c3df0 ("net/mlx4_en: DCB QoS support") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/mlx4_en: Avoid adding steering rules with invalid ringTalat Batheesh
[ Upstream commit 89c557687a32c294e9d25670a96e9287c09f2d5f ] Inserting steering rules with illegal ring is an invalid operation, block it. Fixes: 820672812f82 ('net/mlx4_en: Manage flow steering rules with ethtool') Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22IB/mlx4: Fix incorrectly releasing steerable UD QPs when have only ETH portsJack Morgenstein
commit 852f6927594d0d3e8632c889b2ab38cbc46476ad upstream. Allocating steerable UD QPs depends on having at least one IB port, while releasing those QPs does not. As a result, when there are only ETH ports, the IB (RoCE) driver requests releasing a qp range whose base qp is zero, with qp count zero. When SR-IOV is enabled, and the VF driver is running on a VM over a hypervisor which treats such qp release calls as errors (rather than NOPs), we see lines in the VM message log like: mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0 Fix this by adding a check for a zero count in mlx4_release_qp_range() (which thus treats releasing 0 qps as a nop), and eliminating the check for device managed flow steering when releasing steerable UD QPs. (Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it remains NULL when steerable UD QPs are not allocated). Fixes: 4196670be786 ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20net/mlx4_core: Avoid delays during VF driver device shutdownJack Morgenstein
[ Upstream commit 4cbe4dac82e423ecc9a0ba46af24a860853259f4 ] Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. For such Hypervisors, there is a race condition between the VF's shutdown method and its internal-error detection/reset thread. The internal-error detection/reset thread (which runs every 5 seconds) also detects a disabled comm channel. If the internal-error detection/reset flow wins the race, we still get delays (while that flow tries repeatedly to detect comm-channel recovery). The cited commit fixed the command timeout problem when the internal-error detection/reset flow loses the race. This commit avoids the unneeded delays when the internal-error detection/reset flow wins. Fixes: d585df1c5ccf ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reported-by: Simon Xiao <sixiao@microsoft.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09net/mlx4_en: Fix type mismatch for 32-bit systemsSlava Shwartsman
[ Upstream commit 61b6034c6cfdcb265bb453505c3d688e7567727a ] is_power_of_2 expects unsigned long and we pass u64 max_val_cycles, this will be truncated on 32 bit systems, and the result is not what we were expecting. div_u64 expects u32 as a second argument and we pass max_val_cycles_rounded which is u64 hence it will always be truncated. Fix was tested on both 64 and 32 bit systems and got same results for max_val_cycles and max_val_cycles_rounded. Fixes: 4850cf458157 ("net/mlx4_en: Resolve dividing by zero in 32-bit system") Signed-off-by: Slava Shwartsman <slavash@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new ↵Majd Dibbiny
probed PFs [ Upstream commit 95f1ba9a24af9769f6e20dfe9a77c863f253f311 ] In the VF driver, module parameter mlx4_log_num_mgm_entry_size was mistakenly overwritten -- and in a manner which overrode the device-managed flow steering option encoded in the parameter. log_num_mgm_entry_size is a global module parameter which affects all ConnectX-3 PFs installed on that host. If a VF changes log_num_mgm_entry_size, this will affect all PFs which are probed subsequent to the change (by disabling DMFS for those PFs). Fixes: 3c439b5586e9 ("mlx4_core: Allow choosing flow steering mode") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21net/mlx4_en: fix overflow in mlx4_en_init_timestamp()Eric Dumazet
[ Upstream commit 47d3a07528ecbbccf53bc4390d70b4e3d1c04fcf ] The cited commit makes a great job of finding optimal shift/multiplier values assuming a 10 seconds wrap around, but forgot to change the overflow_period computation. It overflows in cyclecounter_cyc2ns(), and the final result is 804 ms, which is silly. Lets simply use 5 seconds, no need to recompute this, given how it is supposed to work. Later, we will use a timer instead of a work queue, since the new RX allocation schem will no longer need mlx4_en_recover_from_oom() and the service_task firing every 250 ms. Fixes: 31c128b66e5b ("net/mlx4_en: Choose time-stamping shift value according to HW frequency") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabledHuy Nguyen
[ Upstream commit ca3d89a3ebe79367bd41b6b8ba37664478ae2dba ] enable_4k_uar module parameter was added in patch cited below to address the backward compatibility issue in SRIOV when the VM has system's PAGE_SIZE uar implementation and the Hypervisor has 4k uar implementation. The above compatibility issue does not exist in the non SRIOV case. In this patch, we always enable 4k uar implementation if SRIOV is not enabled on mlx4's supported cards. Fixes: 76e39ccf9c36 ("net/mlx4_core: Fix backward compatibility on VFs") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-12net/mlx4_en: don't set CHECKSUM_COMPLETE on SCTP packetsDavide Caratti
[ Upstream commit e718fe450e616227b74d27a233cdf37b4df0c82b ] if the NIC fails to validate the checksum on TCP/UDP, and validation of IP checksum is successful, the driver subtracts the pseudo-header checksum from the value obtained by the hardware and sets CHECKSUM_COMPLETE. Don't do that if protocol is IPPROTO_SCTP, otherwise CRC32c validation fails. V2: don't test MLX4_CQE_STATUS_IPV6 if MLX4_CQE_STATUS_IPV4 is set Reported-by: Shuang Li <shuali@redhat.com> Fixes: f8c6455bb04b ("net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06net/mlx4_core: Fix raw qp flow steering rules under SRIOVJack Morgenstein
[ Upstream commit 10b1c04e92229ebeb38ccd0dcf2b6d3ec73c0575 ] Demoting simple flow steering rule priority (for DPDK) was achieved by wrapping FW commands MLX4_QP_FLOW_STEERING_ATTACH/DETACH for the PF as well, and forcing the priority to MLX4_DOMAIN_NIC in the wrapper function for the PF and all VFs. In function mlx4_ib_create_flow(), this change caused the main rule creation for the PF to be wrapped, while it left the associated tunnel steering rule creation unwrapped for the PF. This mismatch caused rule deletion failures in mlx4_ib_destroy_flow() for the PF when the detach wrapper function did not find the associated tunnel-steering rule (since creation of that rule for the PF did not go through the wrapper function). Fix this by setting MLX4_QP_FLOW_STEERING_ATTACH/DETACH to be "native" (so that the PF invocation does not go through the wrapper), and perform the required priority demotion for the PF in the mlx4_ib_create_flow() code path. Fixes: 48564135cba8 ("net/mlx4_core: Demote simple multicast and broadcast flow steering rules") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06net/mlx4: Remove BUG_ON from ICM allocation routineLeon Romanovsky
[ Upstream commit c1d5f8ff80ea84768f5fae1ca9d1abfbb5e6bbaa ] This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent() by checking DMA address alignment in advance and performing proper folding in case of error. Fixes: 5b0bf5e25efe ("mlx4_core: Support ICM tables in coherent memory") Reported-by: Ozgur Karatas <okaratas@member.fsf.org> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06net/mlx4_core: Use-after-free causes a resource leak in flow-steering detachJack Morgenstein
[ Upstream commit 3b01fe7f91c8e4f9afc4fae3c5af72c14958d2d8 ] mlx4_QP_FLOW_STEERING_DETACH_wrapper first removes the steering rule (which results in freeing the rule structure), and then references a field in this struct (the qp number) when releasing the busy-status on the rule's qp. Since this memory was freed, it could reallocated and changed. Therefore, the qp number in the struct may be incorrect, so that we are releasing the incorrect qp. This leaves the rule's qp in the busy state (and could possibly release an incorrect qp as well). Fix this by saving the qp number in a local variable, for use after removing the steering rule. Fixes: 2c473ae7e582 ("net/mlx4_core: Disallow releasing VF QPs which have steering rules") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOVJack Morgenstein
[ Upstream commit 9577b174cd0323d287c994ef0891db71666d0765 ] When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's message log when (correct, normally operating) apps use SRQ LIMIT events as a trigger to post WQEs to SRQs. Add more information to the existing debug printout for SRQ_LIMIT, and output the warning messages only for the SRQ CATAS ERROR event. Fixes: acba2420f9d2 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs") Fixes: e0debf9cb50d ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17net/mlx4_core: Avoid command timeouts during VF driver device shutdownJack Morgenstein
[ Upstream commit d585df1c5ccf995fcee910705ad7a9cdd11d4152 ] Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. The result is that the VF driver on the VM will experience a command timeout during the shutdown process when the Hypervisor does not deliver a command-completion event to the VM. To avoid FW command timeouts on the VM when the driver's shutdown method is invoked, we detect the absence of the VF's comm channel at the very start of the shutdown process. If the comm-channel has already been disabled, we cause all FW commands during the device shutdown process to immediately return success (and thus avoid all command timeouts). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-18net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT ↵Jack Morgenstein
transitions commit 7c3945bc2073554bb2ecf983e073dee686679c53 upstream. Save the qp context flags byte containing the flag disabling vlan stripping in the RESET to INIT qp transition, rather than in the INIT to RTR transition. Per the firmware spec, the flags in this byte are active in the RESET to INIT transition. As a result of saving the flags in the incorrect qp transition, when switching dynamically from VGT to VST and back to VGT, the vlan remained stripped (as is required for VST) and did not return to not-stripped (as is required for VGT). Fixes: f0f829bf42cd ("net/mlx4_core: Add immediate activate for VGT->VST->VGT") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-18net/mlx4_core: Fix racy CQ (Completion Queue) freeJack Morgenstein
commit 291c566a28910614ce42d0ffe82196eddd6346f4 upstream. In function mlx4_cq_completion() and mlx4_cq_event(), the radix_tree_lookup requires a rcu_read_lock. This is mandatory: if another core frees the CQ, it could run the radix_tree_node_rcu_free() call_rcu() callback while its being used by the radix tree lookup function. Additionally, in function mlx4_cq_event(), since we are adding the rcu lock around the radix-tree lookup, we no longer need to take the spinlock. Also, the synchronize_irq() call for the async event eliminates the need for incrementing the cq reference count in mlx4_cq_event(). Other changes: 1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock: we no longer take this spinlock in the interrupt context. The spinlock here, therefore, simply protects against different threads simultaneously invoking mlx4_cq_free() for different cq's. 2. In function mlx4_cq_free(), we move the radix tree delete to before the synchronize_irq() calls. This guarantees that we will not access this cq during any subsequent interrupts, and therefore can safely free the CQ after the synchronize_irq calls. The rcu_read_lock in the interrupt handlers only needs to protect against corrupting the radix tree; the interrupt handlers may access the cq outside the rcu_read_lock due to the synchronize_irq calls which protect against premature freeing of the cq. 3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg. 4. We leave the cq reference count mechanism in place, because it is still needed for the cq completion tasklet mechanism. Fixes: 6d90aa5cf17b ("net/mlx4_core: Make sure there are no pending async events when freeing CQ") Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-18net/mlx4_en: Fix bad WQE issueEugenia Emantayev
commit 6496bbf0ec481966ef9ffe5b6660d8d1b55c60cc upstream. Single send WQE in RX buffer should be stamped with software ownership in order to prevent the flow of QP in error in FW once UPDATE_QP is called. Fixes: 9f519f68cfff ('mlx4_en: Not using Shared Receive Queues') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-12net/mlx4_core: Use device ID definesBjorn Helgaas
[ Upstream commit c19e4b9037fa8a0477525a64e93847f534e8cc17 ] We added a bunch of new Mellanox device ID definitions because they'll be used by INTx quirks. Use them in the mlx4 ID table also so grep can find both places. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-18mlx4: Invoke softirqs after napi_rescheduleBenjamin Poirier
[ Upstream commit bd4ce941c8d5b862b2f83364be5dbe8fc8ab48f8 ] mlx4 may schedule napi from a workqueue. Afterwards, softirqs are not run in a deterministic time frame and the following message may be logged: NOHZ: local_softirq_pending 08 The problem is the same as what was described in commit ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule") and this patch applies the same fix to mlx4. Fixes: 07841f9d94c1 ("net/mlx4_en: Schedule napi when RX buffers allocation fails") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-04mlx4: do not call napi_schedule() without careEric Dumazet
[ Upstream commit 8cf699ec849f4ca1413cea01289bd7d37dbcc626 ] Disable BH around the call to napi_schedule() to avoid following warning [ 52.095499] NOHZ: local_softirq_pending 08 [ 52.421291] NOHZ: local_softirq_pending 08 [ 52.608313] NOHZ: local_softirq_pending 08 Fixes: 8d59de8f7bb3 ("net/mlx4_en: Process all completions in RX rings after port goes up") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-28net/mlx4: Fix uninitialized fields in rule when adding promiscuous mode to ↵Jack Morgenstein
device managed flow steering In procedure mlx4_flow_steer_promisc_add(), several fields were left uninitialized in the rule structure. Correctly initialize these fields. Fixes: 592e49dda812 ("net/mlx4: Implement promiscuous mode with device managed flow-steering") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28Revert "net/mlx4_en: Avoid unregister_netdev at shutdown flow"Tariq Toukan
This reverts commit 9d76931180557270796f9631e2c79b9c7bb3c9fb. Using unregister_netdev at shutdown flow prevents calling the netdev's ndos or trying to access its freed resources. This fixes crashes like the following: Call Trace: [<ffffffff81587a6e>] dev_get_phys_port_id+0x1e/0x30 [<ffffffff815a36ce>] rtnl_fill_ifinfo+0x4be/0xff0 [<ffffffff815a53f3>] rtmsg_ifinfo_build_skb+0x73/0xe0 [<ffffffff815a5476>] rtmsg_ifinfo.part.27+0x16/0x50 [<ffffffff815a54c8>] rtmsg_ifinfo+0x18/0x20 [<ffffffff8158a6c6>] netdev_state_change+0x46/0x50 [<ffffffff815a5e78>] linkwatch_do_dev+0x38/0x50 [<ffffffff815a6165>] __linkwatch_run_queue+0xf5/0x170 [<ffffffff815a6205>] linkwatch_event+0x25/0x30 [<ffffffff81099a82>] process_one_work+0x152/0x400 [<ffffffff8109a325>] worker_thread+0x125/0x4b0 [<ffffffff8109a200>] ? rescuer_thread+0x350/0x350 [<ffffffff8109fc6a>] kthread+0xca/0xe0 [<ffffffff8109fba0>] ? kthread_park+0x60/0x60 [<ffffffff816a1285>] ret_from_fork+0x25/0x30 Fixes: 9d7693118055 ("net/mlx4_en: Avoid unregister_netdev at shutdown flow") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reported-by: Steve Wise <swise@opengridcomputing.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-23net/mlx4_en: Free netdev resources under state lockTariq Toukan
Make sure mlx4_en_free_resources is called under the netdev state lock. This is needed since RCU dereference of XDP prog should be protected. Fixes: 326fe02d1ed6 ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reported-by: Sagi Grimberg <sagi@grimberg.me> CC: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09Revert "net/mlx4_en: Fix panic during reboot"Tariq Toukan
This reverts commit 9d2afba058722d40cc02f430229c91611c0e8d16. The original issue would possibly exist if an external module tried calling our "ethtool_ops" without checking if it still exists. The right way of solving it is by simply doing the check in the caller side. Currently, no action is required as there's no such use case. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx4_en: Save slave ethtool stats commandTariq Toukan
Following the previous patch, as an optimization, the slave will not even bother sending the DUMP_ETH_STATS command over the comm channel. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx4_en: Fix potential deadlock in port statistics flowJack Morgenstein
mlx4_en_DUMP_ETH_STATS took the *counter mutex* and then called the FW command, with WRAPPED attribute. As a result, the fw command is wrapped on the Hypervisor when it calls mlx4_en_DUMP_ETH_STATS. The FW command wrapper flow on the hypervisor takes the *slave_cmd_mutex* during processing. At the same time, a VF could be in the process of coming up, and could call mlx4_QUERY_FUNC_CAP. On the hypervisor, the command flow takes the *slave_cmd_mutex*, then executes mlx4_QUERY_FUNC_CAP_wrapper. mlx4_QUERY_FUNC_CAP wrapper calls mlx4_get_default_counter_index(), which takes the *counter mutex*. DEADLOCK. The fix is that the DUMP_ETH_STATS fw command should be called with the NATIVE attribute, so that on the hypervisor, this command does not enter the wrapper flow. Since the Hypervisor no longer goes through the wrapper code, we also simply return 0 in mlx4_DUMP_ETH_STATS_wrapper (i.e.the function succeeds, but the returned data will be all zeroes). No need to test if it is the Hypervisor going through the wrapper. Fixes: f9baff509f8a ("mlx4_core: Add "native" argument to mlx4_cmd ...") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx4: Fix firmware command timeout during interrupt testEugenia Emantayev
Currently interrupt test that is part of ethtool selftest runs the check over all interrupt vectors of the device. In mlx4_en package part of interrupt vectors are uninitialized since mlx4_ib doesn't exist. This causes NOP FW command to time out. Change logic to test current port interrupt vectors only. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx4_core: Do not access comm channel if it has not yet been initializedJack Morgenstein
In the Hypervisor, there are several FW commands which are invoked before the comm channel is initialized (in mlx4_multi_func_init). These include MOD_STAT_CONFIG, QUERY_DEV_CAP, INIT_HCA, and others. If any of these commands fails, say with a timeout, the Hypervisor driver enters the internal error reset flow. In this flow, the driver attempts to notify all slaves via the comm channel that an internal error has occurred. Since the comm channel has not yet been initialized (i.e., mapped via ioremap), this will cause dereferencing a NULL pointer. To fix this, do not access the comm channel in the internal error flow if it has not yet been initialized. Fixes: 55ad359225b2 ("net/mlx4_core: Enable device recovery flow with SRIOV") Fixes: ab9c17a009ee ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx4_en: Fix panic during rebootEugenia Emantayev
Fix a kernel panic that occurs as a result of an asynchronous event handled in roce_gid_mgmt: mlx4_en_get_drvinfo is called and accesses freed resources. This happens in a shutdown flow only, since pci device is destroyed while netdevice is still alive. Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net/mlx4_en: Process all completions in RX rings after port goes upErez Shitrit
Currently there is a race between incoming traffic and initialization flow. HW is able to receive the packets after INIT_PORT is done and unicast steering is configured. Before we set priv->port_up NAPI is not scheduled and receive queues become full. Therefore we never get new interrupts about the completions. This issue could happen if running heavy traffic during bringing port up. The resolution is to schedule NAPI once port_up is set. If receive queues were full this will process all cqes and release them. Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-16 04:32:28 +0000