summaryrefslogtreecommitdiff
path: root/drivers/net/netxen/netxen_nic_niu.c
AgeCommit message (Collapse)Author
2009-08-26netxen: remove netxen_nic_niu.cDhananjay Phadke
Consolidate all MAC/PHY access functions into netxen_nic_hw.c Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26netxen: implement generic pcie semaphore functionsDhananjay Phadke
Implement common function for locking/unlocking 8 hardware semaphores used for serializing access to shared resouces on a NIC board by different PCI functions. As by definition, callers of these semaphore API can be put to sleep till the semaphore is locked. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26netxen: remove unused codeDhananjay Phadke
Remove code for phy access on unreleased NX2031 based quad-gig board. NX3031 based production quad-gig boards do not require direct phy access by driver. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06netxen: fix bonding supportDhananjay Phadke
o Pause traffic during mac addr change. o Enable setting mac address for NX3031. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08netxen: sanitize function namesDhananjay Phadke
Replace superfluous wrapper functions with two macros: NXWR32 replaces netxen_nic_reg_write, netxen_nic_write_w0, netxen_nic_read_w1, netxen_crb_writelit_adapter. NXRD32 replaces netxen_nic_reg_read, netxen_nic_read_w0, netxen_nic_read_w1. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08netxen: annotate register access functionsDhananjay Phadke
o remove unnecessary length parameter since register access width is fixed 4 byte. o remove superfluous pci_read_normalize and pci_write_normalize functions. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08netxen: code cleanupDhananjay Phadke
o remove unused structure defs. o remove unnecessary includes. o replace enums with specific #defines. o reduce footprint of stats structure. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27netxen: update copyrightDhananjay Phadke
Extend copyright into 2009 and update address. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24netxen: cleanup unused codeDhananjay Phadke
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07netxen: fix promisc mode, mtu settingDhananjay Phadke
For NX3031, multicast filtering, promisc mode, and max frame size setting is handled by firmware, driver needs to send request to enable/disable it. For old chip revisions / firmware, driver still sets it directly. Added function pointer to set mtu according to chip revision. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07netxen: fix link status, link speedDhananjay Phadke
For NX3031, the phy is managed by firmware, so driver should avoid setting any phy registers. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: mtu, mac, link status changesDhananjay Phadke
MAC addr, multicast filters, mtu are set through firmware commands in firmware v4.0.0+ because of virtualization of physical ports. Link status is also read from registers allocated by firmware for each virtual port. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: add 2MB PCI memory supportDhananjay Phadke
New revision of netxen chip has 2MB PCI memory. Older chips had 128MB addressable PCI memory. To retain compatibility, this patch adds function pointers based on pci bar0 size. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: hw multicast filteringDhananjay Phadke
Enable multicast address filtering capabilities in the hardware. Upto 16 multicast addresses can be programmed for each physical port. Support "allmulti" mode, if enabled. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: remove global physical_port arrayDhananjay Phadke
Store physical port number in netxen_adapter structure. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28[netdrvr] netxen: checkpatch fixes (98% trim trailing whitespace)Jeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28drivers/net/netxen: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28drivers/net/netxen/: cleanupsAdrian Bunk
This patch contains the following cleanups: - static functions in .c files shouldn't be marked inline - make needlessly global code static - #if 0 unused code Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12netxen: stop second phy correctlydhananjay@netxen.com
This patch fixes bug that doesn't quiesce second port when interface is brought down, which could lead to unwarranted interrupt during rmmod / ifdown. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-08drivers/net: fix comparisons of unsigned < 0Bill Nottingham
Recent gcc versions emit warnings when unsigned variables are compared < 0 or >= 0. Signed-off-by: Bill Nottingham <notting@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09NetXen: Fix ping issue after reboot on Blades with 3.4.19 firmwareMithlesh Thukral
NetXen: Fix initialization and subsequent ping issue on 3.4.19 firmware This patch fixes the ping problem seen X/PBlades after the adapter's firmware was moved to 3.4.19. After configured interface up, ping failed. NetXen adapter couldn't accept ARP broadcast packet. Manual addition of MAC address in the ARP table, made ping work. NetXen adapter should finish initilization after system boot. But looks NetXen adapter didn't initilization correctly after system boot up. So have to re-load the firmware again in probe routine. Also re-initilization netxen_config_0 and netxen_config_1 registers. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28NetXen: Port swap feature for multi port cardsMithlesh Thukral
NetXen: Port Swap feature This patch will allow a port numbers on the card to be swapped in host driver. This feature is applicable to cards having more than 1 port. Signed-off by: Milan Bag <mbag@netxen.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28NetXen: Removal of redundant argument passingMithlesh Thukral
NetXen: Removal of redundant function call parameters and bug fixes. This patch will remove the redundant paramters which were being passed to many functions since now adapter->portnum can be used. Signed-off-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28NetXen: Use multiple PCI functionsMithlesh Thukral
NetXen: Make driver use multiple PCI functions. This patch will make NetXen driver work with multiple PCI functions. This will make the usage of memory resources as well as interrupts more independent among different functions which results in better throughput. This change has been done after the multiport support is added in firmware. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09NetXen: Fixes for ppc architecture.Amit S. Kale
NetXen: Fixes for ppc architecture. Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-31netxen patchesAl Viro
Have fun. >From 24f4a1a77431575a9cdfaae25adda85842099f70 Mon Sep 17 00:00:00 2001 From: Al Viro <viro@zeniv.linux.org.uk> Date: Mon, 1 Jan 2007 15:22:56 -0500 Subject: [PATCH] netxen trivial annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-04[PATCH] NetXen: multiport firmware support, ioctl interfaceAmit S. Kale
NetXen: 1G/10G Ethernet driver updates - Multiport and newer firmware support - ioctl interface for user level tools - Cast error fix for multiport Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 281 +++++++++++++++++++++++++------- netxen_nic_ethtool.c | 12 - netxen_nic_hw.c | 429 +++++++++++++++++++++++++++++++++++++++++--------- netxen_nic_init.c | 301 ++++++++++++++++++++++++++++++----- netxen_nic_ioctl.h | 2 netxen_nic_isr.c | 3 netxen_nic_main.c | 260 ++++++++++++++++++------------ netxen_nic_niu.c | 22 +- netxen_nic_phan_reg.h | 228 ++++++++++++++++---------- 9 files changed, 1161 insertions(+), 377 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-04[PATCH] NetXen: whitespace cleaup and more cleanup fixesAmit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 56 ++++++++++++++++++++-------------------------- netxen_nic_ethtool.c | 53 +++++++++++++++++++++----------------------- netxen_nic_hdr.h | 6 ++--- netxen_nic_hw.c | 54 +++++++++++++++++++++------------------------ netxen_nic_hw.h | 10 ++++---- netxen_nic_init.c | 61 +++++++++++++++++++++++++-------------------------- netxen_nic_ioctl.h | 6 ++--- netxen_nic_isr.c | 48 +++++++++++++++++----------------------- netxen_nic_main.c | 54 +++++++++++++++++---------------------------- netxen_nic_niu.c | 10 ++++---- 10 files changed, 165 insertions(+), 193 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] NetXen: temp monitoring, newer firmware support, mm footprint reductionAmit S. Kale
NetXen: 1G/10G Ethernet Driver updates - Temparature monitoring and device control - Memory footprint reduction - Driver changes to support newer version of firmware Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 165 ++++++++++++++++++++++++++++++++-- netxen_nic_ethtool.c | 89 ++++++++++++------ netxen_nic_hdr.h | 71 +++++++++++++- netxen_nic_hw.c | 206 +++++++++++++++++++++++++++++-------------- netxen_nic_hw.h | 8 + netxen_nic_init.c | 239 +++++++++++++++++++++++++++++++++++++++++--------- netxen_nic_ioctl.h | 12 +- netxen_nic_isr.c | 54 +++++------ netxen_nic_main.c | 121 +++++++++++++++++-------- netxen_nic_niu.c | 172 +++++++++++++++++++++++++++-------- netxen_nic_phan_reg.h | 24 ++++- 11 files changed, 891 insertions(+), 270 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02Add NetXen 1G/10G ethernet driver.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-26 06:56:00 +0000