summaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)Author
2019-06-11qmi_wwan: Add quirk for Quectel dynamic configKristian Evensen
commit e4bf63482c309287ca84d91770ffa7dcc18e37eb upstream. Most, if not all, Quectel devices use dynamic interface numbers, and users are able to change the USB configuration at will. Matching on for example interface number is therefore not possible. Instead, the QMI device can be identified by looking at the interface class, subclass and protocol (all 0xff), as well as the number of endpoints. The reason we need to look at the number of endpoints, is that the diagnostic port interface has the same class, subclass and protocol as QMI. However, the diagnostic port only has two endpoints, while QMI has three. Until now, we have identified the QMI device by combining a match on class, subclass and protocol, with a call to the function quectel_diag_detect(). In quectel_diag_detect(), we check if the number of endpoints matches for known Quectel vendor/product ids. Adding new vendor/product ids to quectel_diag_detect() is not a good long-term solution. This commit replaces the function with a quirk, and applies the quirk to affected Quectel devices that I have been able to test the change with (EP06, EM12 and EC25). If the quirk is set and the number of endpoints equal two, we return from qmi_wwan_probe() with -ENODEV. [In order for this patch to apply cleanly to 4.14, two minor changes had to be made. First, the original work-around (quectel_diag_detect()) for the dynamic interface numbers was never backported to 4.14, so there is no need to remove this code. Second, support for the EM12 was also not backported to 4.14. Since supporting EM12 is a trivial change (just another VID/PID match), and the match for EM12 is changed by this patch, I chose to not submit adding EM12-support as a separate patch.] Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-09usbnet: fix kernel crash after disconnectKloetzke Jan
[ Upstream commit ad70411a978d1e6e97b1e341a7bde9a79af0c93d ] When disconnecting cdc_ncm the kernel sporadically crashes shortly after the disconnect: [ 57.868812] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 58.006653] PC is at 0x0 [ 58.009202] LR is at call_timer_fn+0xec/0x1b4 [ 58.013567] pc : [<0000000000000000>] lr : [<ffffff80080f5130>] pstate: 00000145 [ 58.020976] sp : ffffff8008003da0 [ 58.024295] x29: ffffff8008003da0 x28: 0000000000000001 [ 58.029618] x27: 000000000000000a x26: 0000000000000100 [ 58.034941] x25: 0000000000000000 x24: ffffff8008003e68 [ 58.040263] x23: 0000000000000000 x22: 0000000000000000 [ 58.045587] x21: 0000000000000000 x20: ffffffc68fac1808 [ 58.050910] x19: 0000000000000100 x18: 0000000000000000 [ 58.056232] x17: 0000007f885aff8c x16: 0000007f883a9f10 [ 58.061556] x15: 0000000000000001 x14: 000000000000006e [ 58.066878] x13: 0000000000000000 x12: 00000000000000ba [ 58.072201] x11: ffffffc69ff1db30 x10: 0000000000000020 [ 58.077524] x9 : 8000100008001000 x8 : 0000000000000001 [ 58.082847] x7 : 0000000000000800 x6 : ffffff8008003e70 [ 58.088169] x5 : ffffffc69ff17a28 x4 : 00000000ffff138b [ 58.093492] x3 : 0000000000000000 x2 : 0000000000000000 [ 58.098814] x1 : 0000000000000000 x0 : 0000000000000000 ... [ 58.205800] [< (null)>] (null) [ 58.210521] [<ffffff80080f5298>] expire_timers+0xa0/0x14c [ 58.215937] [<ffffff80080f542c>] run_timer_softirq+0xe8/0x128 [ 58.221702] [<ffffff8008081120>] __do_softirq+0x298/0x348 [ 58.227118] [<ffffff80080a6304>] irq_exit+0x74/0xbc [ 58.232009] [<ffffff80080e17dc>] __handle_domain_irq+0x78/0xac [ 58.237857] [<ffffff8008080cf4>] gic_handle_irq+0x80/0xac ... The crash happens roughly 125..130ms after the disconnect. This correlates with the 'delay' timer that is started on certain USB tx/rx errors in the URB completion handler. The problem is a race of usbnet_stop() with usbnet_start_xmit(). In usbnet_stop() we call usbnet_terminate_urbs() to cancel all URBs in flight. This only makes sense if no new URBs are submitted concurrently, though. But the usbnet_start_xmit() can run at the same time on another CPU which almost unconditionally submits an URB. The error callback of the new URB will then schedule the timer after it was already stopped. The fix adds a check if the tx queue is stopped after the tx list lock has been taken. This should reliably prevent the submission of new URBs while usbnet_terminate_urbs() does its job. The same thing is done on the rx side even though it might be safe due to other flags that are checked there. Signed-off-by: Jan Klötzke <Jan.Kloetzke@preh.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25net: usb: qmi_wwan: add Telit 0x1260 and 0x1261 compositionsDaniele Palmas
[ Upstream commit b4e467c82f8c12af78b6f6fa5730cb7dea7af1b4 ] Added support for Telit LE910Cx 0x1260 and 0x1261 compositions. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-04usbnet: ipheth: fix potential null pointer dereference in ipheth_carrier_setGustavo A. R. Silva
commit 61c59355e0154a938b28710dfa6c1d8be2ddcefa upstream. _dev_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _dev_ has been null checked. Addresses-Coverity-ID: 1462020 Fixes: bb1b40c7cb86 ("usbnet: ipheth: prevent TX queue timeouts when device not ready") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-04usbnet: ipheth: prevent TX queue timeouts when device not readyAlexander Kappner
commit bb1b40c7cb863f0800a6410c7dcb86cf3f28d3b1 upstream. iOS devices require the host to be "trusted" before servicing network packets. Establishing trust requires the user to confirm a dialog on the iOS device.Until trust is established, the iOS device will silently discard network packets from the host. Currently, the ipheth driver does not detect whether an iOS device has established trust with the host, and immediately sets up the transmit queues. This causes the following problems: - Kernel taint due to WARN() in netdev watchdog. - Dmesg spam ("TX timeout"). - Disruption of user space networking activity (dhcpd, etc...) when new interface comes up but cannot be used. - Unnecessary host and device wakeups and USB traffic Example dmesg output: [ 1101.319778] NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out [ 1101.319817] ------------[ cut here ]------------ [ 1101.319828] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x20f/0x220 [ 1101.319831] Modules linked in: ipheth usbmon nvidia_drm(PO) nvidia_modeset(PO) nvidia(PO) iwlmvm mac80211 iwlwifi btusb btrtl btbcm btintel qmi_wwan bluetooth cfg80211 ecdh_generic thinkpad_acpi rfkill [last unloaded: ipheth] [ 1101.319861] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P O 4.13.12.1 #1 [ 1101.319864] Hardware name: LENOVO 20ENCTO1WW/20ENCTO1WW, BIOS N1EET62W (1.35 ) 11/10/2016 [ 1101.319867] task: ffffffff81e11500 task.stack: ffffffff81e00000 [ 1101.319873] RIP: 0010:dev_watchdog+0x20f/0x220 [ 1101.319876] RSP: 0018:ffff8810a3c03e98 EFLAGS: 00010292 [ 1101.319880] RAX: 000000000000003a RBX: 0000000000000000 RCX: 0000000000000000 [ 1101.319883] RDX: ffff8810a3c15c48 RSI: ffffffff81ccbfc2 RDI: 00000000ffffffff [ 1101.319886] RBP: ffff880c04ebc41c R08: 0000000000000000 R09: 0000000000000379 [ 1101.319889] R10: 00000100696589d0 R11: 0000000000000378 R12: ffff880c04ebc000 [ 1101.319892] R13: 0000000000000000 R14: 0000000000000001 R15: ffff880c2865fc80 [ 1101.319896] FS: 0000000000000000(0000) GS:ffff8810a3c00000(0000) knlGS:0000000000000000 [ 1101.319899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1101.319902] CR2: 00007f3ff24ac000 CR3: 0000000001e0a000 CR4: 00000000003406f0 [ 1101.319905] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1101.319908] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1101.319910] Call Trace: [ 1101.319914] <IRQ> [ 1101.319921] ? dev_graft_qdisc+0x70/0x70 [ 1101.319928] ? dev_graft_qdisc+0x70/0x70 [ 1101.319934] ? call_timer_fn+0x2e/0x170 [ 1101.319939] ? dev_graft_qdisc+0x70/0x70 [ 1101.319944] ? run_timer_softirq+0x1ea/0x440 [ 1101.319951] ? timerqueue_add+0x54/0x80 [ 1101.319956] ? enqueue_hrtimer+0x38/0xa0 [ 1101.319963] ? __do_softirq+0xed/0x2e7 [ 1101.319970] ? irq_exit+0xb4/0xc0 [ 1101.319976] ? smp_apic_timer_interrupt+0x39/0x50 [ 1101.319981] ? apic_timer_interrupt+0x8c/0xa0 [ 1101.319983] </IRQ> [ 1101.319992] ? cpuidle_enter_state+0xfa/0x2a0 [ 1101.319999] ? do_idle+0x1a3/0x1f0 [ 1101.320004] ? cpu_startup_entry+0x5f/0x70 [ 1101.320011] ? start_kernel+0x444/0x44c [ 1101.320017] ? early_idt_handler_array+0x120/0x120 [ 1101.320023] ? x86_64_start_kernel+0x145/0x154 [ 1101.320028] ? secondary_startup_64+0x9f/0x9f [ 1101.320033] Code: 20 04 00 00 eb 9f 4c 89 e7 c6 05 59 44 71 00 01 e8 a7 df fd ff 89 d9 4c 89 e6 48 c7 c7 70 b7 cd 81 48 89 c2 31 c0 e8 97 64 90 ff <0f> ff eb bf 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 [ 1101.320103] ---[ end trace 0cc4d251e2b57080 ]--- [ 1101.320110] ipheth 1-5:4.2: ipheth_tx_timeout: TX timeout The last message "TX timeout" is repeated every 5 seconds until trust is established or the device is disconnected, filling up dmesg. The proposed patch eliminates the problem by, upon connection, keeping the TX queue and carrier disabled until a packet is first received from the iOS device. This is reflected by the confirmed_pairing variable in the device structure. Only after at least one packet has been received from the iOS device, the transmit queue and carrier are brought up during the periodic device poll in ipheth_carrier_set. Because the iOS device will always send a packet immediately upon trust being established, this should not delay the interface becoming useable. To prevent failed UBRs in ipheth_rcvbulk_callback from perpetually re-enabling the queue if it was disabled, a new check is added so only successful transfers re-enable the queue, whereas failed transfers only trigger an immediate poll. This has the added benefit of removing the periodic control requests to the iOS device until trust has been established and thus should reduce wakeup events on both the host and the iOS device. Signed-off-by: Alexander Kappner <agk@godking.net> Signed-off-by: David S. Miller <davem@davemloft.net> [groeck: Fixed context conflict seen because 45611c61dd50 was applied first] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17qmi_wwan: add Olicard 600Bjørn Mork
[ Upstream commit 6289d0facd9ebce4cc83e5da39e15643ee998dc5 ] This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23qmi_wwan: apply SET_DTR quirk to Sierra WP7607Beniamino Galvani
[ Upstream commit 97dc47a1308a3af46a09b1546cfb869f2e382a81 ] The 1199:68C0 USB ID is reused by Sierra WP7607 which requires the DTR quirk to be detected. Apply QMI_QUIRK_SET_DTR unconditionally as already done for other IDs shared between different devices. Signed-off-by: Beniamino Galvani <bgalvani@redhat.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05net: usb: asix: ax88772_bind return error when hw_reset failZhang Run
[ Upstream commit 6eea3527e68acc22483f4763c8682f223eb90029 ] The ax88772_bind() should return error code immediately when the PHY was not reset properly through ax88772a_hw_reset(). Otherwise, The asix_get_phyid() will block when get the PHY Identifier from the PHYSID1 MII registers through asix_mdio_read() due to the PHY isn't ready. Furthermore, it will produce a lot of error message cause system crash.As follows: asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffffb9 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 ... Signed-off-by: Zhang Run <zhang.run@zte.com.cn> Reviewed-by: Yang Wei <yang.wei9@zte.com.cn> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12usbnet: smsc95xx: fix rx packet alignmentBen Dooks
[ Upstream commit 810eeb1f41a9a272eedc94ca18c072e75678ede4 ] The smsc95xx driver already takes into account the NET_IP_ALIGN parameter when setting up the receive packet data, which means we do not need to worry about aligning the packets in the usbnet driver. Adding the EVENT_NO_IP_ALIGN means that the IPv4 header is now passed to the ip_rcv() routine with the start on an aligned address. Tested on Raspberry Pi B3. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-26qmi_wwan: add MTU default to qmap network interfaceDaniele Palmas
[ Upstream commit f87118d5760f00af7228033fbe783c7f380d2866 ] This patch adds MTU default value to qmap network interface in order to avoid "RTNETLINK answers: No buffer space available" error when setting an ipv6 address. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13qmi_wwan: Fix qmap header retrieval in qmimux_rx_fixupDaniele Palmas
[ Upstream commit d667044f49513d55fcfefe4fa8f8d96091782901 ] This patch fixes qmap header retrieval when modem is configured for dl data aggregation. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13lan78xx: Resolve issue with changing MAC addressJason Martinsen
[ Upstream commit 15515aaaa69659c502003926a2067ee76176148a ] Current state for the lan78xx driver does not allow for changing the MAC address of the interface, without either removing the module (if you compiled it that way) or rebooting the machine. If you attempt to change the MAC address, ifconfig will show the new address, however, the system/interface will not respond to any traffic using that configuration. A few short-term options to work around this are to unload the module and reload it with the new MAC address, change the interface to "promisc", or reboot with the correct configuration to change the MAC. This patch enables the ability to change the MAC address via fairly normal means... ifdown <interface> modify entry in /etc/network/interfaces OR a similar method ifup <interface> Then test via any network communication, such as ICMP requests to gateway. My only test platform for this patch has been a raspberry pi model 3b+. Signed-off-by: Jason Martinsen <jasonmartinsen@msn.com> ----- Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-09qmi_wwan: apply SET_DTR quirk to the SIMCOM shared device IDBjørn Mork
commit 102cd909635612c0be784a519651954a7924c786 upstream. SIMCOM are reusing a single device ID for many (all of their?) different modems, based on different chipsets and firmwares. Newer Qualcomm chipset generations require setting DTR to wake the QMI function. The SIM7600E modem is using such a chipset, making it fail to work with this driver despite the device ID match. Fix by unconditionally enabling the SET_DTR quirk for all SIMCOM modems using this specific device ID. This is similar to what we already have done for another case of device IDs recycled over multiple chipset generations: 14cf4a771b30 ("drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201") Initial testing on an older SIM7100 modem shows no immediate side effects. Reported-by: Sebastian Sjoholm <sebastian.sjoholm@gmail.com> Cc: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09qmi_wwan: Add support for Fibocom NL678 seriesJörgen Storvist
[ Upstream commit 7c3db4105ce8d69bcb5c04bfa9acd1e9119af8d5 ] Added support for Fibocom NL678 series cellular module QMI interface. Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x40 series chipsets. Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09qmi_wwan: Added support for Fibocom NL668 seriesJörgen Storvist
[ Upstream commit 110a1cc28bc383adb4885eff27e18c61ddebffb4 ] Added support for Fibocom NL668 series QMI interface. Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x07 chipsets. Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09qmi_wwan: Added support for Telit LN940 seriesJörgen Storvist
[ Upstream commit 1986af16e8ed355822600c24b3d2f0be46b573df ] Added support for the Telit LN940 series cellular modules QMI interface. QMI_QUIRK_SET_DTR quirk requied for Qualcomm MDM9x40 chipset. Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-29USB: hso: Fix OOB memory access in hso_probe/hso_get_config_dataHui Peng
commit 5146f95df782b0ac61abde36567e718692725c89 upstream. The function hso_probe reads if_num from the USB device (as an u8) and uses it without a length check to index an array, resulting in an OOB memory read in hso_probe or hso_get_config_data. Add a length check for both locations and updated hso_probe to bail on error. This issue has been assigned CVE-2018-19985. Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by: Hui Peng <benquike@gmail.com> Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2Bernd Eckstein
[ Upstream commit 45611c61dd503454b2edae00aabe1e429ec49ebe ] The bug is not easily reproducable, as it may occur very infrequently (we had machines with 20minutes heavy downloading before it occurred) However, on a virual machine (VMWare on Windows 10 host) it occurred pretty frequently (1-2 seconds after a speedtest was started) dev->tx_skb mab be freed via dev_kfree_skb_irq on a callback before it is set. This causes the following problems: - double free of the skb or potential memory leak - in dmesg: 'recvmsg bug' and 'recvmsg bug 2' and eventually general protection fault Example dmesg output: [ 134.841986] ------------[ cut here ]------------ [ 134.841987] recvmsg bug: copied 9C24A555 seq 9C24B557 rcvnxt 9C25A6B3 fl 0 [ 134.841993] WARNING: CPU: 7 PID: 2629 at /build/linux-hwe-On9fm7/linux-hwe-4.15.0/net/ipv4/tcp.c:1865 tcp_recvmsg+0x44d/0xab0 [ 134.841994] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi [ 134.842046] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu [ 134.842046] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 134.842048] RIP: 0010:tcp_recvmsg+0x44d/0xab0 [ 134.842048] RSP: 0018:ffffa6630422bcc8 EFLAGS: 00010286 [ 134.842049] RAX: 0000000000000000 RBX: ffff997616f4f200 RCX: 0000000000000006 [ 134.842049] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff9976257d6490 [ 134.842050] RBP: ffffa6630422bd98 R08: 0000000000000001 R09: 000000000004bba4 [ 134.842050] R10: 0000000001e00c6f R11: 000000000004bba4 R12: ffff99760dee3000 [ 134.842051] R13: 0000000000000000 R14: ffff99760dee3514 R15: 0000000000000000 [ 134.842051] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000 [ 134.842052] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 134.842053] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0 [ 134.842055] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 134.842055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 134.842057] Call Trace: [ 134.842060] ? aa_sk_perm+0x53/0x1a0 [ 134.842064] inet_recvmsg+0x51/0xc0 [ 134.842066] sock_recvmsg+0x43/0x50 [ 134.842070] SYSC_recvfrom+0xe4/0x160 [ 134.842072] ? __schedule+0x3de/0x8b0 [ 134.842075] ? ktime_get_ts64+0x4c/0xf0 [ 134.842079] SyS_recvfrom+0xe/0x10 [ 134.842082] do_syscall_64+0x73/0x130 [ 134.842086] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 134.842086] RIP: 0033:0x7fe331f5a81d [ 134.842088] RSP: 002b:00007ffe8da98398 EFLAGS: 00000246 ORIG_RAX: 000000000000002d [ 134.842090] RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 00007fe331f5a81d [ 134.842094] RDX: 00000000000003fb RSI: 0000000001e00874 RDI: 0000000000000003 [ 134.842095] RBP: 00007fe32f642c70 R08: 0000000000000000 R09: 0000000000000000 [ 134.842097] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe332347698 [ 134.842099] R13: 0000000001b7e0a0 R14: 0000000001e00874 R15: 0000000000000000 [ 134.842103] Code: 24 fd ff ff e9 cc fe ff ff 48 89 d8 41 8b 8c 24 10 05 00 00 44 8b 45 80 48 c7 c7 08 bd 59 8b 48 89 85 68 ff ff ff e8 b3 c4 7d ff <0f> 0b 48 8b 85 68 ff ff ff e9 e9 fe ff ff 41 8b 8c 24 10 05 00 [ 134.842126] ---[ end trace b7138fc08c83147f ]--- [ 134.842144] general protection fault: 0000 [#1] SMP PTI [ 134.842145] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi [ 134.842161] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu [ 134.842162] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 134.842164] RIP: 0010:tcp_close+0x2c6/0x440 [ 134.842165] RSP: 0018:ffffa6630422bde8 EFLAGS: 00010202 [ 134.842167] RAX: 0000000000000000 RBX: ffff99760dee3000 RCX: 0000000180400034 [ 134.842168] RDX: 5c4afd407207a6c4 RSI: ffffe868495bd300 RDI: ffff997616f4f200 [ 134.842169] RBP: ffffa6630422be08 R08: 0000000016f4d401 R09: 0000000180400034 [ 134.842169] R10: ffffa6630422bd98 R11: 0000000000000000 R12: 000000000000600c [ 134.842170] R13: 0000000000000000 R14: ffff99760dee30c8 R15: ffff9975bd44fe00 [ 134.842171] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000 [ 134.842173] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 134.842174] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0 [ 134.842177] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 134.842178] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 134.842179] Call Trace: [ 134.842181] inet_release+0x42/0x70 [ 134.842183] __sock_release+0x42/0xb0 [ 134.842184] sock_close+0x15/0x20 [ 134.842187] __fput+0xea/0x220 [ 134.842189] ____fput+0xe/0x10 [ 134.842191] task_work_run+0x8a/0xb0 [ 134.842193] exit_to_usermode_loop+0xc4/0xd0 [ 134.842195] do_syscall_64+0xf4/0x130 [ 134.842197] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 134.842197] RIP: 0033:0x7fe331f5a560 [ 134.842198] RSP: 002b:00007ffe8da982e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ 134.842200] RAX: 0000000000000000 RBX: 00007fe32f642c70 RCX: 00007fe331f5a560 [ 134.842201] RDX: 00000000008f5320 RSI: 0000000001cd4b50 RDI: 0000000000000003 [ 134.842202] RBP: 00007fe32f6500f8 R08: 000000000000003c R09: 00000000009343c0 [ 134.842203] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe32f6500d0 [ 134.842204] R13: 00000000008f5320 R14: 00000000008f5320 R15: 0000000001cd4770 [ 134.842205] Code: c8 00 00 00 45 31 e4 49 39 fe 75 4d eb 50 83 ab d8 00 00 00 01 48 8b 17 48 8b 47 08 48 c7 07 00 00 00 00 48 c7 47 08 00 00 00 00 <48> 89 42 08 48 89 10 0f b6 57 34 8b 47 2c 2b 47 28 83 e2 01 80 [ 134.842226] RIP: tcp_close+0x2c6/0x440 RSP: ffffa6630422bde8 [ 134.842227] ---[ end trace b7138fc08c831480 ]--- The proposed patch eliminates a potential racing condition. Before, usb_submit_urb was called and _after_ that, the skb was attached (dev->tx_skb). So, on a callback it was possible, however unlikely that the skb was freed before it was set. That way (because dev->tx_skb was not set to NULL after it was freed), it could happen that a skb from a earlier transmission was freed a second time (and the skb we should have freed did not get freed at all) Now we free the skb directly in ipheth_tx(). It is not passed to the callback anymore, eliminating the posibility of a double free of the same skb. Depending on the retval of usb_submit_urb() we use dev_kfree_skb_any() respectively dev_consume_skb_any() to free the skb. Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com> Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01lan78xx: Read MAC address from DT if presentPhil Elwell
commit 760db29bdc97b73ff60b091315ad787b1deb5cf5 upstream. There is a standard mechanism for locating and using a MAC address from the Device Tree. Use this facility in the lan78xx driver to support applications without programmed EEPROM or OTP. At the same time, regularise the handling of the different address sources. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Paolo Pisati <p.pisati@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-23usbnet: smsc95xx: disable carrier check while suspendingFrieder Schrempf
[ Upstream commit 7b900ead6cc66b2ee873cb042dfba169aa68b56c ] We need to make sure, that the carrier check polling is disabled while suspending. Otherwise we can end up with usbnet_read_cmd() being issued when only usbnet_read_cmd_nopm() is allowed. If this happens, read operations lock up. Fixes: d69d169493 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Raghuram Chary J <RaghuramChary.Jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-23net: smsc95xx: Fix MTU rangeStefan Wahren
[ Upstream commit 85b18b0237ce9986a81a1b9534b5e2ee116f5504 ] The commit f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") introduce a common MTU handling for usbnet. But it's missing the necessary changes for smsc95xx. So set the MTU range accordingly. This patch has been tested on a Raspberry Pi 3. Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-04lan78xx: Don't reset the interface on openPhil Elwell
[ Upstream commit 47b998653fea4ef69e3e89574956386f262bccca ] Commit 92571a1aae40 ("lan78xx: Connect phy early") moves the PHY initialisation into lan78xx_probe, but lan78xx_open subsequently calls lan78xx_reset. As well as forcing a second round of link negotiation, this reset frequently prevents the phy interrupt from being generated (even though the link is up), rendering the interface unusable. Fix this issue by removing the lan78xx_reset call from lan78xx_open. Fixes: 92571a1aae40 ("lan78xx: Connect phy early") Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04smsc95xx: Check for Wake-on-LAN modesFlorian Fainelli
[ Upstream commit c530c471ba37bdd9fe1c7185b01455c00ae606fb ] The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: e0e474a83c18 ("smsc95xx: add wol magic packet support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04smsc75xx: Check for Wake-on-LAN modesFlorian Fainelli
[ Upstream commit 9c734b2769a73eea2e9e9767c0e0bf839ff23679 ] The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: 6c636503260d ("smsc75xx: add wol magic packet support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04r8152: Check for supported Wake-on-LAN ModesFlorian Fainelli
[ Upstream commit f2750df1548bd8a2b060eb609fc43ca82811af4c ] The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: 21ff2e8976b1 ("r8152: support WOL") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04sr9800: Check for supported Wake-on-LAN modesFlorian Fainelli
[ Upstream commit c5cb93e994ffb43b7b3b1ff10b9f928f54574a36 ] The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04lan78xx: Check for supported Wake-on-LAN modesFlorian Fainelli
[ Upstream commit eb9ad088f96653a26b340f7c447c44cf023d5cdc ] The driver supports a fair amount of Wake-on-LAN modes, but is not checking that the user specified one that is supported. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Woojung Huh <Woojung.Huh@Microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04ax88179_178a: Check for supported Wake-on-LAN modesFlorian Fainelli
[ Upstream commit 5ba6b4aa9a410c5e2c6417df52b5e2118ea9b467 ] The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04asix: Check for supported Wake-on-LAN modesFlorian Fainelli
[ Upstream commit c4ce446e33d7a0e978256ac6fea4c80e59d9de5f ] The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: 2e55cc7210fe ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-18qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interfaceGiacinto Cifelli
[ Upstream commit 4f7617705bfff84d756fe4401a1f4f032f374984 ] Added support for Gemalto's Cinterion ALASxx WWAN interfaces by adding QMI_FIXED_INTF with Cinterion's VID and PID. Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18net/usb: cancel pending work when unbinding smsc75xxYu Zhao
[ Upstream commit f7b2a56e1f3dcbdb4cf09b2b63e859ffe0e09df8 ] Cancel pending work before freeing smsc75xx private data structure during binding. This fixes the following crash in the driver: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: mutex_lock+0x2b/0x3f <snipped> Workqueue: events smsc75xx_deferred_multicast_write [smsc75xx] task: ffff8caa83e85700 task.stack: ffff948b80518000 RIP: 0010:mutex_lock+0x2b/0x3f <snipped> Call Trace: smsc75xx_deferred_multicast_write+0x40/0x1af [smsc75xx] process_one_work+0x18d/0x2fc worker_thread+0x1a2/0x269 ? pr_cont_work+0x58/0x58 kthread+0xfa/0x10a ? pr_cont_work+0x58/0x58 ? rcu_read_unlock_sched_notrace+0x48/0x48 ret_from_fork+0x22/0x40 Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29qmi_wwan: set DTR for modems in forced USB2 modeBjørn Mork
[ Upstream commit 922005c7f50e7f4b2a6dbc182e9c575b4f92396b ] Recent firmware revisions have added the ability to force these modems to USB2 mode, hiding their SuperSpeed capabilities from the host. The driver has been using the SuperSpeed capability, as shown by the bcdUSB field of the device descriptor, to detect the need to enable the DTR quirk. This method fails when the modems are forced to USB2 mode by the modem firmware. Fix by unconditionally enabling the DTR quirk for the affected device IDs. Reported-by: Fred Veldini <fred.veldini@gmail.com> Reported-by: Deshu Wen <dwen@sierrawireless.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Reported-by: Fred Veldini <fred.veldini@gmail.com> Reported-by: Deshu Wen <dwen@sierrawireless.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05qmi_wwan: fix interface number for DW5821e production firmwareAleksander Morgado
[ Upstream commit f25e1392fdb556290957142ac2da33a02cbff403 ] The original mapping for the DW5821e was done using a development version of the firmware. Confirmed with the vendor that the final USB layout ends up exposing the QMI control/data ports in USB config #1, interface #0, not in interface #1 (which is now a HID interface). T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Fixes: e7e197edd09c25 ("qmi_wwan: add support for the Dell Wireless 5821e module") Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24net: usb: rtl8150: demote allmulti message to dev_dbg()David Lechner
[ Upstream commit 3a9b0455062ffb9d2f6cd4473a76e3456f318c9f ] This driver can spam the kernel log with multiple messages of: net eth0: eth0: allmulti set Usually 4 or 8 at a time (probably because of using ConnMan). This message doesn't seem useful, so let's demote it from dev_info() to dev_dbg(). Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24smsc75xx: Add workaround for gigabit link up hardware errata.Yuiko Oshino
[ Upstream commit d461e3da905332189aad546b2ad9adbe6071c7cc ] In certain conditions, the device may not be able to link in gigabit mode. This software workaround ensures that the device will not enter the failure state. Fixes: d0cad871703b898a442e4049c532ec39168e5b57 ("SMSC75XX USB 2.0 Gigabit Ethernet Devices") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03net: lan78xx: fix rx handling before first packet is sendStefan Wahren
[ Upstream commit 136f55f660192ce04af091642efc75d85e017364 ] As long the bh tasklet isn't scheduled once, no packet from the rx path will be handled. Since the tx path also schedule the same tasklet this situation only persits until the first packet transmission. So fix this issue by scheduling the tasklet after link reset. Link: https://github.com/raspberrypi/linux/issues/2617 Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Suggested-by: Floris Bos <bos@je-eigen-domein.nl> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25net: usb: asix: replace mii_nway_restart in resume pathAlexander Couzens
[ Upstream commit 5c968f48021a9b3faa61ac2543cfab32461c0e05 ] mii_nway_restart is not pm aware which results in a rtnl deadlock. Implement mii_nway_restart manual by setting BMCR_ANRESTART if BMCR_ANENABLE is set. To reproduce: * plug an asix based usb network interface * wait until the device enters PM (~5 sec) * `ip link set eth1 up` will never return Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter") Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25qmi_wwan: add support for Quectel EG91Matevz Vucnik
[ Upstream commit 38cd58ed9c4e389799b507bcffe02a7a7a180b33 ] This adds the USB id of LTE modem Quectel EG91. It requires the same quirk as other Quectel modems to make it work. Signed-off-by: Matevz Vucnik <vucnikm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22net: lan78xx: Fix race in tx pending skb size calculationStefan Wahren
commit dea39aca1d7aef1e2b95b07edeacf04cc8863a2e upstream. The skb size calculation in lan78xx_tx_bh is in race with the start_xmit, which could lead to rare kernel oopses. So protect the whole skb walk with a spin lock. As a benefit we can unlink the skb directly. This patch was tested on Raspberry Pi 3B+ Link: https://github.com/raspberrypi/linux/issues/2608 Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Cc: stable <stable@vger.kernel.org> Signed-off-by: Floris Bos <bos@je-eigen-domein.nl> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22r8152: napi hangup fix after disconnectJiri Slaby
[ Upstream commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5 ] When unplugging an r8152 adapter while the interface is UP, the NIC becomes unusable. usb->disconnect (aka rtl8152_disconnect) deletes napi. Then, rtl8152_disconnect calls unregister_netdev and that invokes netdev->ndo_stop (aka rtl8152_close). rtl8152_close tries to napi_disable, but the napi is already deleted by disconnect above. So the first while loop in napi_disable never finishes. This results in complete deadlock of the network layer as there is rtnl_mutex held by unregister_netdev. So avoid the call to napi_disable in rtl8152_close when the device is already gone. The other calls to usb_kill_urb, cancel_delayed_work_sync, netif_stop_queue etc. seem to be fine. The urb and netdev is not destroyed yet. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22qmi_wwan: add support for the Dell Wireless 5821e moduleAleksander Morgado
[ Upstream commit e7e197edd09c25774b4f12cab19f9d5462f240f4 ] This module exposes two USB configurations: a QMI+AT capable setup on USB config #1 and a MBIM capable setup on USB config #2. By default the kernel will choose the MBIM capable configuration as long as the cdc_mbim driver is available. This patch adds support for the QMI port in the secondary configuration. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-08net: qmi_wwan: Add Netgear Aircard 779SJosh Hill
[ Upstream commit 2415f3bd059fe050eb98aedf93664d000ceb4e92 ] Add support for Netgear Aircard 779S Signed-off-by: Josh Hill <josh@joshuajhill.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-26cdc_ncm: avoid padding beyond end of skbBjørn Mork
[ Upstream commit 49c2c3f246e2fc3009039e31a826333dcd0283cd ] Commit 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame") added logic to reserve space for the NDP at the end of the NTB/skb. This reservation did not take the final alignment of the NDP into account, causing us to reserve too little space. Additionally the padding prior to NDP addition did not ensure there was enough space for the NDP. The NTB/skb with the NDP appended would then exceed the configured max size. This caused the final padding of the NTB to use a negative count, padding to almost INT_MAX, and resulting in: [60103.825970] BUG: unable to handle kernel paging request at ffff9641f2004000 [60103.825998] IP: __memset+0x24/0x30 [60103.826001] PGD a6a06067 P4D a6a06067 PUD 4f65a063 PMD 72003063 PTE 0 [60103.826013] Oops: 0002 [#1] SMP NOPTI [60103.826018] Modules linked in: (removed( [60103.826158] CPU: 0 PID: 5990 Comm: Chrome_DevTools Tainted: G O 4.14.0-3-amd64 #1 Debian 4.14.17-1 [60103.826162] Hardware name: LENOVO 20081 BIOS 41CN28WW(V2.04) 05/03/2012 [60103.826166] task: ffff964193484fc0 task.stack: ffffb2890137c000 [60103.826171] RIP: 0010:__memset+0x24/0x30 [60103.826174] RSP: 0000:ffff964316c03b68 EFLAGS: 00010216 [60103.826178] RAX: 0000000000000000 RBX: 00000000fffffffd RCX: 000000001ffa5000 [60103.826181] RDX: 0000000000000005 RSI: 0000000000000000 RDI: ffff9641f2003ffc [60103.826184] RBP: ffff964192f6c800 R08: 00000000304d434e R09: ffff9641f1d2c004 [60103.826187] R10: 0000000000000002 R11: 00000000000005ae R12: ffff9642e6957a80 [60103.826190] R13: ffff964282ff2ee8 R14: 000000000000000d R15: ffff9642e4843900 [60103.826194] FS: 00007f395aaf6700(0000) GS:ffff964316c00000(0000) knlGS:0000000000000000 [60103.826197] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [60103.826200] CR2: ffff9641f2004000 CR3: 0000000013b0c000 CR4: 00000000000006f0 [60103.826204] Call Trace: [60103.826212] <IRQ> [60103.826225] cdc_ncm_fill_tx_frame+0x5e3/0x740 [cdc_ncm] [60103.826236] cdc_ncm_tx_fixup+0x57/0x70 [cdc_ncm] [60103.826246] usbnet_start_xmit+0x5d/0x710 [usbnet] [60103.826254] ? netif_skb_features+0x119/0x250 [60103.826259] dev_hard_start_xmit+0xa1/0x200 [60103.826267] sch_direct_xmit+0xf2/0x1b0 [60103.826273] __dev_queue_xmit+0x5e3/0x7c0 [60103.826280] ? ip_finish_output2+0x263/0x3c0 [60103.826284] ip_finish_output2+0x263/0x3c0 [60103.826289] ? ip_output+0x6c/0xe0 [60103.826293] ip_output+0x6c/0xe0 [60103.826298] ? ip_forward_options+0x1a0/0x1a0 [60103.826303] tcp_transmit_skb+0x516/0x9b0 [60103.826309] tcp_write_xmit+0x1aa/0xee0 [60103.826313] ? sch_direct_xmit+0x71/0x1b0 [60103.826318] tcp_tasklet_func+0x177/0x180 [60103.826325] tasklet_action+0x5f/0x110 [60103.826332] __do_softirq+0xde/0x2b3 [60103.826337] irq_exit+0xae/0xb0 [60103.826342] do_IRQ+0x81/0xd0 [60103.826347] common_interrupt+0x98/0x98 [60103.826351] </IRQ> [60103.826355] RIP: 0033:0x7f397bdf2282 [60103.826358] RSP: 002b:00007f395aaf57d8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff6e [60103.826362] RAX: 0000000000000000 RBX: 00002f07bc6d0900 RCX: 00007f39752d7fe7 [60103.826365] RDX: 0000000000000022 RSI: 0000000000000147 RDI: 00002f07baea02c0 [60103.826368] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [60103.826371] R10: 00000000ffffffff R11: 0000000000000000 R12: 00002f07baea02c0 [60103.826373] R13: 00002f07bba227a0 R14: 00002f07bc6d090c R15: 0000000000000000 [60103.826377] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 <f3> 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 [60103.826442] RIP: __memset+0x24/0x30 RSP: ffff964316c03b68 [60103.826444] CR2: ffff9641f2004000 Commit e1069bbfcf3b ("net: cdc_ncm: Reduce memory use when kernel memory low") made this bug much more likely to trigger by reducing the NTB size under memory pressure. Link: https://bugs.debian.org/893393 Reported-by: Горбешко Богдан <bodqhrohro@gmail.com> Reported-and-tested-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: Enrico Mioso <mrkiko.rs@gmail.com> Fixes: 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11net: usb: cdc_mbim: add flag FLAG_SEND_ZLPDaniele Palmas
[ Upstream commit 9f7c728332e8966084242fcd951aa46583bc308c ] Testing Telit LM940 with ICMP packets > 14552 bytes revealed that the modem needs FLAG_SEND_ZLP to properly work, otherwise the cdc mbim data interface won't be anymore responsive. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30lan78xx: Connect phy earlyAlexander Graf
[ Upstream commit 92571a1aae40d291158d16e7142637908220f470 ] When using wicked with a lan78xx device attached to the system, we end up with ethtool commands issued on the device before an ifup got issued. That lead to the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000039c pgd = ffff800035b30000 [0000039c] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Modules linked in: [...] Supported: Yes CPU: 3 PID: 638 Comm: wickedd Tainted: G E 4.12.14-0-default #1 Hardware name: raspberrypi rpi/rpi, BIOS 2018.03-rc2 02/21/2018 task: ffff800035e74180 task.stack: ffff800036718000 PC is at phy_ethtool_ksettings_get+0x20/0x98 LR is at lan78xx_get_link_ksettings+0x44/0x60 [lan78xx] pc : [<ffff0000086f7f30>] lr : [<ffff000000dcca84>] pstate: 20000005 sp : ffff80003671bb20 x29: ffff80003671bb20 x28: ffff800035e74180 x27: ffff000008912000 x26: 000000000000001d x25: 0000000000000124 x24: ffff000008f74d00 x23: 0000004000114809 x22: 0000000000000000 x21: ffff80003671bbd0 x20: 0000000000000000 x19: ffff80003671bbd0 x18: 000000000000040d x17: 0000000000000001 x16: 0000000000000000 x15: 0000000000000000 x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000020 x11: 0101010101010101 x10: fefefefefefefeff x9 : 7f7f7f7f7f7f7f7f x8 : fefefeff31677364 x7 : 0000000080808080 x6 : ffff80003671bc9c x5 : ffff80003671b9f8 x4 : ffff80002c296190 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff80003671bbd0 x0 : ffff80003671bc00 Process wickedd (pid: 638, stack limit = 0xffff800036718000) Call trace: Exception stack(0xffff80003671b9e0 to 0xffff80003671bb20) b9e0: ffff80003671bc00 ffff80003671bbd0 0000000000000000 0000000000000000 ba00: ffff80002c296190 ffff80003671b9f8 ffff80003671bc9c 0000000080808080 ba20: fefefeff31677364 7f7f7f7f7f7f7f7f fefefefefefefeff 0101010101010101 ba40: 0000000000000020 0000000000000000 ffffffffffffffff 0000000000000000 ba60: 0000000000000000 0000000000000001 000000000000040d ffff80003671bbd0 ba80: 0000000000000000 ffff80003671bbd0 0000000000000000 0000004000114809 baa0: ffff000008f74d00 0000000000000124 000000000000001d ffff000008912000 bac0: ffff800035e74180 ffff80003671bb20 ffff000000dcca84 ffff80003671bb20 bae0: ffff0000086f7f30 0000000020000005 ffff80002c296000 ffff800035223900 bb00: 0000ffffffffffff 0000000000000000 ffff80003671bb20 ffff0000086f7f30 [<ffff0000086f7f30>] phy_ethtool_ksettings_get+0x20/0x98 [<ffff000000dcca84>] lan78xx_get_link_ksettings+0x44/0x60 [lan78xx] [<ffff0000087cbc40>] ethtool_get_settings+0x68/0x210 [<ffff0000087cc0d4>] dev_ethtool+0x214/0x2180 [<ffff0000087e5008>] dev_ioctl+0x400/0x630 [<ffff00000879dd00>] sock_do_ioctl+0x70/0x88 [<ffff00000879f5f8>] sock_ioctl+0x208/0x368 [<ffff0000082cde10>] do_vfs_ioctl+0xb0/0x848 [<ffff0000082ce634>] SyS_ioctl+0x8c/0xa8 Exception stack(0xffff80003671bec0 to 0xffff80003671c000) bec0: 0000000000000009 0000000000008946 0000fffff4e841d0 0000aa0032687465 bee0: 0000aaaafa2319d4 0000fffff4e841d4 0000000032687465 0000000032687465 bf00: 000000000000001d 7f7fff7f7f7f7f7f 72606b622e71ff4c 7f7f7f7f7f7f7f7f bf20: 0101010101010101 0000000000000020 ffffffffffffffff 0000ffff7f510c68 bf40: 0000ffff7f6a9d18 0000ffff7f44ce30 000000000000040d 0000ffff7f6f98f0 bf60: 0000fffff4e842c0 0000000000000001 0000aaaafa2c2e00 0000ffff7f6ab000 bf80: 0000fffff4e842c0 0000ffff7f62a000 0000aaaafa2b9f20 0000aaaafa2c2e00 bfa0: 0000fffff4e84818 0000fffff4e841a0 0000ffff7f5ad0cc 0000fffff4e841a0 bfc0: 0000ffff7f44ce3c 0000000080000000 0000000000000009 000000000000001d bfe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 The culprit is quite simple: The driver tries to access the phy left and right, but only actually has a working reference to it when the device is up. The fix thus is quite simple too: Get a reference to the phy on probe already and keep it even when the device is going down. With this patch applied, I can successfully run wicked on my system and bring the interface up and down as many times as I want, without getting NULL pointer dereferences in between. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30net: qmi_wwan: add BroadMobi BM806U 2020:2033Pawel Dembicki
[ Upstream commit 743989254ea9f132517806d8893ca9b6cf9dc86b ] BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router. The USB id is added to qmi_wwan.c to allow QMI communication with the BM806U. Tested on 4.14 kernel and OpenWRT. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30lan78xx: Set ASD in MAC_CR when EEE is enabled.Raghuram Chary J
[ Upstream commit e69647a19c870c2f919e4d5023af8a515e8ef25f ] Description: EEE does not work with lan7800 when AutoSpeed is not set. (This can happen when EEPROM is not populated or configured incorrectly) Root-Cause: When EEE is enabled, the mac config register ASD is not set i.e. in default state, causing EEE fail. Fix: Set the register when eeprom is not present. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30r8152: fix tx packets accountingEric Dumazet
[ Upstream commit 4c27bf3c5b7434ccb9ab962301da661c26b467a4 ] r8152 driver handles TSO packets (limited to ~16KB) quite well, but pretends each TSO logical packet is a single packet on the wire. There is also some error since headers are accounted once, but error rate is small enough that we do not care. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30smsc75xx: fix smsc75xx_set_features()Eric Dumazet
[ Upstream commit 88e80c62671ceecdbb77c902731ec95a4bfa62f9 ] If an attempt is made to disable RX checksums, USB adapter is changed but netdev->features is not, because smsc75xx_set_features() returns a non zero value. This throws errors from netdev_rx_csum_fault() : <devname>: hw csum failure Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-25net-usb: add qmi_wwan if on lte modem wistron neweb d18q1Giuseppe Lippolis
[ Upstream commit d4c4bc11353f3bea6754f7d21e3612c9f32d1d64 ] This modem is embedded on dlink dwr-921 router. The oem configuration states: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=0918 Rev= 2.32 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-03 08:03:12 +0000