summaryrefslogtreecommitdiff
path: root/drivers/net/vxge
AgeCommit message (Collapse)Author
2011-07-21vxge: do vlan cleanupJiri Pirko
- unify vlan and nonvlan rx path - kill vdev->vlgrp and vxge_vlan_rx_register Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: vxge: Use is_multicast_ether_addr helperTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27vxge: remove unnecessary reads of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21ip: introduce ip_is_fragment helper inline functionPaul Gortmaker
There are enough instances of this: iph->frag_off & htons(IP_MF | IP_OFFSET) that a helper function is probably warranted. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21net: remove mm.h inclusion from netdevice.hAlexey Dobriyan
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually). To prevent mm.h inclusion via other channels also extract "enum dma_data_direction" definition into separate header. This tiny piece is what gluing netdevice.h with mm.h via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h". Removal of mm.h from scatterlist.h was tried and was found not feasible on most archs, so the link was cutoff earlier. Hope people are OK with tiny include file. Note, that mm_types.h is still dragged in, but it is a separate story. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21vxge: fix 64 bit access on 32 bit platformsstephen hemminger
Need to add stat_sync wrapper around 64 bit statistic values. Fix wraparound bug in lockup detector where it is unsafely comparing 64 bit value that is not atomic. Since only care about detecting activity just looking at current low order bits will work. Remove unused entries in old vxge_sw_stats structure. Change the error counters to unsigned long since they won't grow so large as to have to be 64 bits. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21drivers/net: Remove casts of void *Joe Perches
Unnecessary casts of void * clutter the code. These are the remainder casts after several specific patches to remove netdev_priv and dev_priv. Done via coccinelle script (and a little editing): $ cat cast_void_pointer.cocci @@ type T; T *pt; void *pv; @@ - pt = (T *)pv; + pt = pv; Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Acked-By: Chris Snook <chris.snook@gmail.com> Acked-by: Jon Mason <jdmason@kudzu.us> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06net: remove interrupt.h inclusion from netdevice.hAlexey Dobriyan
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-22Add appropriate <linux/prefetch.h> include for prefetch usersPaul Gortmaker
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: Paul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-29ethtool: cosmetic: Use ethtool ethtool_cmd_speed APIDavid Decotigny
This updates the network drivers so that they don't access the ethtool_cmd::speed field directly, but use ethtool_cmd_speed() instead. For most of the drivers, these changes are purely cosmetic and don't fix any problem, such as for those 1GbE/10GbE drivers that indirectly call their own ethtool get_settings()/mii_ethtool_gset(). The changes are meant to enforce code consistency and provide robustness with future larger throughputs, at the expense of a few CPU cycles for each ethtool operation. All drivers compiled with make allyesconfig ion x86_64 have been updated. Tested: make allyesconfig on x86_64 + e1000e/bnx2x work Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ethtool: Use full 32 bit speed range in ethtool's set_settingsDavid Decotigny
This makes sure the ethtool's set_settings() callback of network drivers don't ignore the 16 most significant bits when ethtool calls their set_settings(). All drivers compiled with make allyesconfig on x86_64 have been updated. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: vxge: convert to hw_featuresMichał Mirosław
Side effect: ->gro_enable is removed as napi_gro_receive() does the fallback itself. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12vxge: update driver versionJon Mason
Update vxge driver version to 2.5.3 Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12vxge: spin-lock issueJon Mason
In vxge_hw_vpath_close, __vxge_hw_vp_terminate memsets the vpath which clobbers the spin lock state, then the driver attempts to acquire the spin lock. Resolve this by not zeroing the lock part of vpath struct, clean-up vpath locking in init, close, and fix locking hole in fw_api call. Issue found by Bob Picco <bpicco@redhat.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12vxge: always enable hardware time stampJon Mason
Hardware time stamp calculation can only be enabled by the privileged function. Enable it always by default and simply use the ethtool interface to set a flag to indicate whether or not the respective function driver should indicate the timestamp along with the received packet. Also, make certain fields in vxge_hw_device_config bit-fields to reduce the size of the struct. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/smsc911x.c
2011-04-06vxge: convert to set_phys_idstephen hemminger
Also fix up incorrect docbook comment Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-27net: fix ethtool->set_flags not intended -EINVAL return valueStanislaw Gruszka
After commit d5dbda23804156ae6f35025ade5307a49d1db6d7 "ethtool: Add support for vlan accleration.", drivers that have NETIF_F_HW_VLAN_TX, and/or NETIF_F_HW_VLAN_RX feature, but do not allow enable/disable vlan acceleration via ethtool set_flags, always return -EINVAL from that function. Fix by returning -EINVAL only if requested features do not match current settings and can not be changed by driver. Change any driver that define ethtool->set_flags to use ethtool_invalid_flags() to avoid similar problems in the future (also on drivers that do not have the problem). Tested with modified (to reproduce this bug) myri10ge driver. Cc: stable@kernel.org # 2.6.37+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28net: use pci_dev->revision, againSergei Shtylyov
Several more network drivers that read the device's revision ID from the PCI configuration register were merged after the commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all drivers to use pci_device->revision), so it's time to do another pass of conversion to using the 'revision' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-02-01vxge: Fix wrong boolean operatorStefan Weil
This error is reported by cppcheck: drivers/net/vxge/vxge-config.c:3693: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead? It looks like cppcheck is correct, so fix this. No test was run. Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Sivakumar Subramani <sivakumar.subramani@exar.com> Cc: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Cc: Jon Mason <jon.mason@exar.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Acked-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19vxge: update driver versionJon Mason
Update vxge driver version to 2.5.2 Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19vxge: MSIX one shot modeJon Mason
To reduce the possibility of losing an interrupt in the handler due to a race between an interrupt processing and disable/enable of interrupts, enable MSIX one shot. Also, add support for adaptive interrupt coalesing Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Masroor Vettuparambil <masroor.vettuparambil@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19vxge: correct eprom version detectionJon Mason
The firmware PXE EPROM version detection is failing due to passing the wrong parameter into firmware query function. Also, the version printing function has an extraneous newline. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Sivakumar Subramani <sivakumar.subramani@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19vxge: cleanup probe error pathsJon Mason
Reorder the commands to be in the inverse order of their allocations (instead of the random order they appear to be in), propagate return code on errors from pci_request_region and register_netdev, reduce the config_dev_cnt and total_dev_cnt counters on remove, and return the correct error code for vdev->vpaths kzalloc failures. Also, prevent leaking of vdev->vpaths memory and netdev in vxge_probe error path due to freeing for these not occurring in vxge_device_unregister. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Sivakumar Subramani <sivakumar.subramani@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) GRETH: resolve SMP issues and other problems GRETH: handle frame error interrupts GRETH: avoid writing bad speed/duplex when setting transfer mode GRETH: fixed skb buffer memory leak on frame errors GRETH: GBit transmit descriptor handling optimization GRETH: fix opening/closing GRETH: added raw AMBA vendor/device number to match against. cassini: Fix build bustage on x86. e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs e1000e: update Copyright for 2011 e1000: Avoid unhandled IRQ r8169: keep firmware in memory. netdev: tilepro: Use is_unicast_ether_addr helper etherdevice.h: Add is_unicast_ether_addr function ks8695net: Use default implementation of ethtool_ops::get_link ks8695net: Disable non-working ethtool operations USB CDC NCM: Don't deref NULL in cdc_ncm_rx_fixup() and don't use uninitialized variable. vxge: Remember to release firmware after upgrading firmware netdev: bfin_mac: Remove is_multicast_ether_addr use in netdev_for_each_mc_addr ipsec: update MAX_AH_AUTH_LEN to support sha512 ...
2011-01-13vxge: Remember to release firmware after upgrading firmwareJesper Juhl
Regardless of whether the firmware update being performed by vxge_fw_upgrade() is a success or not we must still remember to always release_firmware() before returning. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2010-12-28vxge: remove duplicated part of checkDan Carpenter
This is just a cleanup to make the static checkers happy. We don't need to check "own" twice. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-19vxge: add missing flush of reset_taskTejun Heo
Commit 6e07ebd84 (drivers/net: remove unnecessary flush_scheduled_work() calls) incorrectly removed the flush call without replacing it with the appropriate work specific operation. Fix it by flushing vdev->reset_task explicitly. Pointed out by Jon Mason. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jon Mason <jon.mason@exar.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-12drivers/net: remove unnecessary flush_scheduled_work() callsTejun Heo
janz-ican3, sh_eth, skge and vxge don't use workqueue at all and there is no reason to flush the system_wq. Drop flush_scheduled_work() calls and references to workqueue. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Sivakumar Subramani <sivakumar.subramani@exar.com> Cc: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Cc: Jon Mason <jon.mason@exar.com> Cc: netdev@vger.kernel.org
2010-12-10vxge: update driver versionJon Mason
Update vxge driver version to 2.5.1 Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: independent interrupt moderationJon Mason
Configure the workload clock register and TIM register for independent interrupt moderation based on the individual vpath utilization instead of common link utilization. This greatly improves latency. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: hotplug stallJon Mason
When hot-unplugging a vxge adapter while running, the driver's remove routine prints warning and then stalls the calling thread. This is due to vxge_remove calling vxge_device_unregister to unregister the netdev before calling flush_scheduled_work clear any pending work. Swapping the order of these two functions resolves the issue. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: transmit timeout deadlockJon Mason
Use a workqueue to handle the device reset during a transmit timeout, as there can be a deadlock during bringup. Also, set the netif carrier off before the watchdog reset is started to prevent the timeout from reoccurring while still processing the first. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: use pci_request_region()Jon Mason
Only BAR0 is ever accessed, thus making the calls to pci_request_regions overkill. Change calls of pci_request_regions to pci_request_region to reduce the size of the mapped area. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: fix crash of VF when unloading PFJon Mason
Calling pci_disable_sriov when unloading a SR-IOV physical function driver from a host when a guest is using a virtual function from that device can cause a host crash or VM crash. The crash is caused by the virtual config space no longer being present when PF is removed (due to the pci_disable_sriov). This can be avoided by not calling pci_disable_sriov to disable the PCI space when shutting down the PF. Each function in the X3100 operates independently and in this case will operate properly in the absence of the PF. Also, added improved logic in the detection of SR-IOV initialization. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: code cleanup and reorganizationJon Mason
Move function locations to remove the need for internal declarations and other misc clean-ups. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Arpit Patel <arpit.patel@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06net: Fix too optimistic NETIF_F_HW_CSUM featuresMichał Mirosław
NETIF_F_HW_CSUM is a superset of NETIF_F_IP_CSUM+NETIF_F_IPV6_CSUM, but some drivers miss the difference. Fix this and also fix UFO dependency on checksumming offload as it makes the same mistake in assumptions. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-01vxge: update driver versionJon Mason
Update vxge driver version Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-01vxge: use strcpy for stringsJon Mason
Use strncpy instead of memcpy when working on strings Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-01vxge: remove unnecessary printksJon Mason
Remove printks for ring blocks, fifo blocks, and rx doorbell mode as they clutter the dmesg output during modprobe and provide no useful information. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28vxge: remove unnecessary [kv][mcz]alloc castsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-27drivers/net: use vzalloc()Eric Dumazet
Use vzalloc() and vzalloc_node() in net drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net/vxge/vxge-main.c: Remove unnecessary casts of pci_get_drvdataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net/vxge: Remove unnecessary casts of netdev_privJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-11vxge: update driver versionJon Mason
Update vxge driver version Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-11vxge: sparse and other clean-upsJon Mason
Correct issues found by running sparse on the vxge driver, as well as other miscellaneous cleanups. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-11vxge: correct multi-function detectionJon Mason
The values used to determined if the adapter is running in single or multi-function mode were previously modified to the values necessary when making the VXGE_HW_FW_API_GET_FUNC_MODE firmware call. However, the firmware call was not modified. This had the driver printing out on probe that the adapter was in multi-function mode when in single function mode and vice versa. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-15 22:10:34 +0000