summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/Makefile
AgeCommit message (Collapse)Author
2011-04-13ath9k_htc: Move debug code to a separate fileSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k: introduce ATH9K_{PCI,AHB} config optionsGabor Juhos
Currently ath9k only available in menuconfig if PCI bus support is enabled. However the driver is required for the built-in wireless MACs of the Atheros AR9130/AR9132 SoCs. These SoCs have no PCI controller, the wireless MAC is connected to the AHB bus on them. Introduce separated config options for the supported buses, in order to allow building of ath9h without PCI bus support. As a bonus, this patch removes the cross-reference of the ATHEROS_AR71XX option which is not present in the kernel. Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28ath9k: remove support for virtual wiphysFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-21ath9k: make the driver specific rate control module optionalFelix Fietkau
ath9k can use minstrel_ht instead, so it makes sense to save some space here. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath9k_htc: Add support for bluetooth coexistence.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14ath9k_hw: add functions for controlling PA predistortion calibrationFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: move AR9002 mac ops to its own fileLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: Implement AR9003 eeprom callbacksSenthil Balasubramanian
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: split the generic hardware code by hardware familyLuis R. Rodriguez
Move out the generic hardware family code out into their own files, we have one for AR5008, AR9001, and AR9002 family (ar9002_hw.c) and another file for the new AR9003 hardware family (ar9003_hw.c). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: split calib code by hardware familiesLuis R. Rodriguez
Calibration code touches phy registers and since these change the calibration code needs to be abstracted. Noise floor calibration is the only thing remaining but since the remaining calls only touch the AR_PHY_AGC_CONTROL register we'll just define that register conditionally, that will be done separately. The goal is to remove the dependency of ar9002_phy.h on calib.c This also adds stubs to be filled for AR9003 calibration code. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: Fill rx_enable() for the AR9003 hardware familyVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: Add AR9003 PHY supportLuis R. Rodriguez
This add stubs for PHY support for the AR9003 hardware family. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: Move some RF ops to the private callbacksLuis R. Rodriguez
The PHY split is easier done in a few steps. First move the RF ops to the private ops and rename them accordingly. We split PHY stuff up first for the AR5008 and AR9002 families. There are some callbacks that AR9002 share with the AR5008 familiy so we set those first, if AR9002 has some different callbacks it will override them upon hardware init. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-23ath9k_htc: Support for AR9271 chipset.Sujith
Features: * Station mode * IBSS mode * Monitor mode * Legacy support * HT support * TX/RX 11n Aggregation * HW encryption * LED * Suspend/Resume For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Add new file init.cSujith
Move initialization/de-initialization related code to this file. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Add a new file for GPIOSujith
Move all LED/RFKILL/BTCOEX related code to gpio.c Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28ath9k: separate debugfs support from CONFIG_ATH_DEBUGFelix Fietkau
In my setups, ath9k's debugfs files are most of the time much more useful than the messages generated by enabling CONFIG_ATH_DEBUG along with the right debug flags. Since CONFIG_ATH_DEBUG comes with a noticeable overhead on embedded systems, this patch makes it possible to use the debugfs files without that option. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11ath9k_common: add new module to share 802.11n driver helpersLuis R. Rodriguez
ath9k and ath9k_htc share a lot of common hardware characteristics. They only differ in that ath9k_htc works with a target CPU and ath9k works directly with the hardware. ath9k_htc will do *some* things in the firmware, but a lot of others on the host. The common 802.11n hardware code is already shared through the ath9k_hw module. Common helpers amongst all Atheros drivers can use the ath module, this includes ath5k and ar9170 as users. But there is some common driver specific helpers which are not exactly hardware code which ath9k and ath9k_htc can share. We'll be using ath9k_common for this to avoid bloating the ath module and the common 802.11n hardware module ath9k_hw. We start by sharing skb pre and post processing in preparation for a hand off to mac80211. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move hw code to its own moduleLuis R. Rodriguez
hw code for Atheros 802.11n hardware is commmon between different chipsets. This moves this code into a separate module, the next expected user of this code will be the ath9k_htc module. The ath9k/ dir is now selected by ATH9K_HW, an option which gets selected by either ath9k or ath9k_htc, but remains invisible for user menuconfig configuration. If either ath9k or ath9k_htc will be compiled into the kernel ath9k_hw will also be compiled in. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07atheros: move bus ops to ath_commonLuis R. Rodriguez
This is the last part to make ath9k hw code core driver agnostic. I believe ath9k_htc can now use use the hw code unmodified. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move ATH9K_RSSI_BAD to hw.hLuis R. Rodriguez
mac.c is now core driver independent. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: clarify what hw code is and remove ath9k.h from a few filesLuis R. Rodriguez
hw code will be shared between ath9k and ath9k_htc. Just a few more files are left to clean up, mark them as well. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Move btcoex stuff from hw.[ch] to new btcoex.[ch]Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Split eeprom.c into manageable piecesSujith
Add eeprom_def.c, eeprom_4k.c and eeprom_9287.c This improves maintainability. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22atheros: put atheros wireless drivers into ath/Luis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-19 23:10:38 +0000