summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/wil6210/wil6210.h
AgeCommit message (Collapse)Author
2015-03-20wil6210: implement broadcast/multicast dataVladimir Kondratiev
Use dedicated vring for multicast frames; this vring allocated for AP and PBSS (both P2P GO and client) configurations For short frames, use MCS0; for long - MCS1 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: Align Rx frames on 4*n+2 by having SNAPVladimir Kondratiev
For the networking code and for hardware network accelerators, it is better to have IP header 4*n aligned. On the other side, DMA on Rx path require buffer to be aligned on 4*n as well. Having 14 bytes of Ethernet header, these 2 alignment requests are in contradiction. To solve this, order hardware offload block to not remove SNAP header. This adds extra 6 bytes between addresses and ethertype, making it 20 bytes total. This way, both buffer and IP header are 4*n aligned. Remaining is only to remove SNAP by shifting addresses 6 bytes. This involves data copying, so this feature should be disabled unless required by the platform. Module parameter "rx_align_2" (bool, default - false) introduced to control this feature. Feature is completely disabled when parameter is false. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-13wil6210: support AP isolationVladimir Kondratiev
For the AP, configuration may say not to bridge traffic between wireless clients. This is conveyed from user space (ex: hostapd has ap_isolate parameter) with NL80211_CMD_SET_BSS, to the driver's cfg80211 ops method change_bss Add support for this setting. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: rename 'secure_pcp' to 'privacy'Vladimir Kondratiev
Make this field to track privacy attribute for all interface types Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: Change of threshold for tx vring idleness measurementVladimir Shulman
Change threshold to be variable debugfs entry from hard-coded 0. Default threshold value is 16 descriptors because HW is capable of fetching up to 16 descriptors at once. Signed-off-by: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: enable fix for HW bug in 802.11->803.3 transformVladimir Kondratiev
In the old hardware, bug existed that caused DA and SA for every Rx packet to be swapped in the AP mode. New hardware has fix for this bug. Enable this fix in the hardware. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: remove support for old hardwareVladimir Kondratiev
Hardware older than Sparrow B0 obsolete. There is no WiFi product that uses this hardware. Recent firmware does not support it either. Remove driver support. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: boot loaderVladimir Kondratiev
Introduce boot loader. Instead of the operational firmware, very small boot loader is burned to the on-board flash. Boot loader initializes hardware upon reset, and prepares for low power mode. Boot loader reports MAC address and detects radio chip connected. Driver loads firmware only when bringing up interface. All information required to set up network interface, most important is MAC address, reported by the boot loader The firmware composed of 2 files: - wil6210.fw - firmware itself (compiled code + data) - wil6210.board - board file (various board and radio dependent calibrations and parameters) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03wil6210: fix race between xmit and Tx vring de-allocationVladimir Kondratiev
Use spinlock, this should not impact Tx as lock is always free except for de-allocation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: implement cfg80211 probe_client() opVladimir Kondratiev
Access point require this API to check peer alive status. Assume peer is alive when it is connected, because firmware implements keep alive checks and will disconnect peer if it is not alive. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: interrupt moderation configuration updateVladimir Shulman
Due to HW limitation, inter-packet gap timeout max value is 13 usec. Update of current thresholds from 15 to 13 usec. Signed-off-by: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: tuning rings sizeVladimir Shulman
Tuning rings size for performance optimization. Increasing Tx ring size, allows buffering more packets for HW, thus eliminating idle periods which were observed with smaller ring at high throughput, because HW was fetching packets faster than driver was filling them into the TX ring. Rx ring was similarly increased to avoid same problems in Rx. Signed-off-by: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: Add Tx queue len configurationVladimir Shulman
Tx queue was hard-coded to 1000 in ether_setup. Add wil_dev_setup function which configures tx queue len to chosen default value after calling ether_setup. Signed-off-by: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: fix timing of netif_carrier_on indicationDedy Lansky
netif_carrier_on indication was too late. In case Rx packet received before netif_carrier_on indication, upper layers could not send Tx packet back. The fix is to indicate netif_carrier_on earlier: for STA, indicate netif_carrier_on when association starts. for AP/PCP, indicate netif_carrier_on upon starting AP/PCP. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: RX high threshold interrupt configurationVladimir Kondratiev
Rx high threshold interrupt is reported by the hardware in case when number of not utilized by the HW descriptors in the Rx ring becomes low. Introduce module parameter for RX high threshold. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: add advanced interrupt moderationVladimir Kondratiev
Add advanced interrupt moderation support available since "Sparrow B0". Legacy interrupt moderation used only one counter to moderate tx, rx, and misc interrupts. Advanced interrupt moderation bypasses misc, and handles separately tx and rx interrupts. In addition it has two timers for each interrupt type. Max burst duration timer which defines how long to postpone interrupt after first event (receive event for rx and tx complete event for tx), and interframe timeout which defines how to determine the end of the burst and issue interrupt even if the first timer still pending. Capabilities flags in wil_priv is set on initialization according to HW. The rest of the code checks for advanced interrupt capability bit in capabilities flags field. Debugfs is split accordingly: "legacy" interrupt moderation remains unchanged, new debugs files added for advanced interrupt moderation support. Module params are aligned to support advanced interrupt moderation (tx & rx). When not available (for legacy interrupt moderation) will use only rx configuration; Tx configuration will be ignored in this case. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: use HW capabilities mask in resetVladimir Kondratiev
Use the proper reset follow based on HW capabilities detection instead of chip ID. Remove old hw ID mechanism which was used only for reset flow. Remove support for Marlon A0. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: detect HW capabilitiesVladimir Kondratiev
Read relevant information (HW ID for now) once on init and set capabilities accordingly. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: use bitmap API for "status"Vladimir Kondratiev
wil->status used as bitmap; use DECLARE_BITMAP for it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: consider SNAP header in MTU calculationsVladimir Kondratiev
When encapsulating 802.3 frames into the 802.11 ones, 8-byte SNAP header added to save ethtype. SNAP is part of the frame body, thus should be counted in MSDU. So, MTU = MSDU - SNAP Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: fix max. MPDU sizeVladimir Kondratiev
When configuring Tx/Rx VRING's, driver need to specify max. MPDU size It should take into account all overhead introduced by 802.3->208.11 transformation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: delba for responderVladimir Kondratiev
Implement delba flow for the responder (Rx) side Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: control AMSDU on Tx side of Block AckVladimir Kondratiev
When establishing Block Ack as originator (Tx), control AMSDU flag when sending ADDBA and update status upon establishment flow completion. To be used in AMSDU flows Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: allow to configure ADDBA requestVladimir Kondratiev
For manual ADDBA configuration, allow to set desired window size or disable automatic mechanism. Introduce module parameter (int) agg_wsize. It can be changed on run time, will be taken into account on the next connect. Interpretation: - <0 - disable automatic ADDBA; intended for manual testing through debugfs - 0 - use automatically calculated window size - >0 - use this for window size. Clipped by maximum supported by the hardware with current environment. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: simple ADDBA on originator (Tx) sideVladimir Kondratiev
Upon Tx vring creation, initiate BACK establishment with maximum possible window size. When establishing secure connection, there is EAPOL data exchange between connection itself and "data port open", where security is done and non-EAPOL data may be transferred. It is better to send EAPOL frames using normal ACK because of firmware considerations. send ADDBA only is 2 conditions met: - data port open for the corresponded STA - vring created Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: ADDBA/DELBA flowsVladimir Kondratiev
Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-01wil6210: configurable vring sizesVladimir Kondratiev
Allow to configure VRING size for both Rx and Tx via module parameters: rx_ring_order and tx_ring_order. Parameters are ring size orders, i.e. ring size calculated as 1 << order. Defaults for both Tx and Rx are order 9, i.e. size 512 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: remove wil_to_pcie_dev()Vladimir Kondratiev
There is no need to obtain physical device through wil->pdev->dev path, as it is done by this macro. The same device already stored as wiphy's device, thus wil_to_dev() returns the same device as wil_to_pcie_dev() Remove unnecessary macros, this allows to drop dependency by pci.h in the firmware download code. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: add handling of RX HTRSH interruptVladimir Kondratiev
RX_HTRSH interrupt is handled in exactly the same manner as RX_DONE interrupt - fetching accumulated packets from RX ring. In addition there's a rate limitted warning message. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: propagate disconnect reasonVladimir Kondratiev
Propagate reason for the disconnect through the relevant call chains: - report to cfg80211 reason as reported by the firmware - provide to the firmware reason as requested by cfg80211 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30wil6210: Add support for large packetsVladimir Kondratiev
It is possible to configure driver using mtu_max module parameter by setting it to value in range of 68..7920 inclusive. This is sub-optimal performance-wise in case packet is larger than 1 page. mtu_max default value is 2228. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30wil6210: prevent double disconnect command issuingVladimir Kondratiev
Disconnect flow may be invoked either from upper layer request, or from event reported by the firmware. In case of firmware event, driver need to release resources for the station but not send another disconnect WMI command. In case of upper layer request, WMI_DISCONNECT_STA_CMDID command need to be issued for the firmware to perform disconnect on the MAC layer. Eventually, event is expected to confirm MAC disconnect, but it is better to not wait for firmware event and release station resources immediately. FW may fail to report disconnect for various reasons, so one could not rely on event always reported. Introduce parameter to distinguish 2 cases above to prevent double WMI command issuing. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30wil6210: reset flow updatesVladimir Kondratiev
As communicated with the firmware & hardware teams Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27Merge tag 'for-linville-20141024' of git://github.com/kvalo/athJohn W. Linville
Conflicts: drivers/net/wireless/ath/wil6210/wil6210.h
2014-10-05Merge tag 'master-2014-10-02' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-10-03 Please pull tihs batch of updates intended for the 3.18 stream! For the iwlwifi bits, Emmanuel says: "I have here a few things that depend on the latest mac80211's changes: RRM, TPC, Quiet Period etc... Eyal keeps improving our rate control and we have a new device ID. This last patch should probably have gone to wireless.git, but at that stage, I preferred to send it to -next and CC stable." For (most of) the Atheros bits, Kalle says: "The only new feature is testmode support from me. Ben added a new method to crash the firmware with an assert for debug purposes. As usual, we have lots of smaller fixes from Michal. Matteo fixed a Kconfig dependency with debugfs. I fixed some warnings recently added to checkpatch." For the NFC bits, Samuel says: "We've had major updates for TI and ST Microelectronics drivers, and a few NCI related changes. For TI's trf7970a driver: - Target mode support for trf7970a - Suspend/resume support for trf7970a - DT properties additions to handle different quirks - A bunch of fixes for smartphone IOP related issues For ST Microelectronics' ST21NFCA and ST21NFCB drivers: - ISO15693 support for st21nfcb - checkpatch and sparse related warning fixes - Code cleanups and a few minor fixes Finally, Marvell added ISO15693 support to the NCI stack, together with a couple of NCI fixes." For the Bluetooth bits, Johan says: "This 3.18 pull request replaces the one I did on Monday ("bluetooth-next 2014-09-22", which hasn't been pulled yet). The additions since the last request are: - SCO connection fix for devices not supporting eSCO - Cleanups regarding the SCO establishment logic - Remove unnecessary return value from logging functions - Header compression fix for 6lowpan - Cleanups to the ieee802154/mrf24j40 driver Here's a copy from previous request that this one replaces: ' Here are some more patches for 3.18. They include various fixes to the btusb HCI driver, a fix for LE SMP, as well as adding Jukka to the MAINTAINERS file for generic 6LoWPAN (as requested by Alexander Aring). I've held on to this pull request a bit since we were waiting for a SCO related fix to get sorted out first. However, since the merge window is getting closer I decided not to wait for it. If we do get the fix sorted out there'll probably be a second small pull request later this week. '" And, "Unless 3.17 gets delayed this will probably be our last -next pull request for 3.18. We've got: - New Marvell hardware supportr - Multicast support for 6lowpan - Several of 6lowpan fixes & cleanups - Fix for a (false-positive) lockdep warning in L2CAP - Minor btusb cleanup" On top of all that comes the usual sort of updates to ath5k, ath9k, ath10k, brcmfmac, mwifiex, and wil6210. This time around there are also a number of rtlwifi updates to enable some new hardware and to reconcile the in-kernel drivers with some newer releases of the Realtek vendor drivers. Also of note is some device tree work for the bcma bus. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-02wil6210: atomic I/O for the card memoryVladimir Kondratiev
Introduce netdev IOCTLs, to be used by the debug tools. Allows to read/write single dword value or memory block, aligned to dword Different address modes supported: - BAR offset - Firmware "linker" address - target's AHB bus Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-02wil6210: manual FW error recovery modeVladimir Kondratiev
Introduce manual FW recovery mode. It is activated if module parameter @no_fw_recovery set to true. May be changed at runtime. Recovery information provided by new "recovery" debugfs file. It prints: mode = [auto|manual] state = [idle|pending|running] In manual mode, after FW error, recovery won't start automatically. Instead, after notification to user space, recovery waits in "pending" state, as indicated by the "recovery" debugfs file. User space tools may perform data collection and allow to continue recovery by writing "run" to the "recovery" debugfs file. Alternatively, recovery pending may be canceled by stopping network interface i.e. 'ifconfig wlan0 down' Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-29ath: change logging functions to return voidJoe Perches
The return values are not used by callers of these functions so change the functions to return void. Other miscellanea: o add __printf verification to wil6210 logging functions No format/argument mismatches found Acked-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-26wil6210: ethtool opsVladimir Kondratiev
Provide ethtool support; with support for interrupt coalescing through get_coalesce/set_coalesce. Placeholders for begin/complete will be used by runtime PM to make sure target is powered up while performing ethtool operations Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-26Merge tag 'master-2014-09-16' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-09-22 Please pull this batch of updates intended for the 3.18 stream... For the mac80211 bits, Johannes says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." For the bluetooth bits, Johan says: "Here are some more patches intended for 3.18. Most of them are cleanups or fixes for SMP. The only exception is a fix for BR/EDR L2CAP fixed channels which should now work better together with the L2CAP information request procedure." For the iwlwifi bits, Emmanuel says: "I fix here dvm which was broken by my last pull request. Arik continues to work on TDLS and Luca solved a few issues in CT-Kill. Eyal keeps digging into rate scaling code, more to come soon. Besides this, nothing really special here." Beyond that, there are the usual big batches of updates to ath9k, b43, mwifiex, and wil6210 as well as a handful of other bits here and there. Also, rtlwifi gets some btcoexist attention from Larry. Please let me know if there are problems! ==================== Had to adjust the wil6210 code to comply with Joe Perches's recent change in net-next to make the netdev_*() routines return void instead of 'int'. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15fixup! wil6210: fix usage of print_hex_dump_debugVladimir Kondratiev
Use empty inline functions instead of empty #define. Fix for "unused variable" as reported below: tree: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master head: 167bf96dd87d2a8360cb9e9783006876dac4f579 commit: 871d8c4bbb0f23c29a21b63b1801071766f69b51 [45/62] wil6210: fix usage of print_hex_dump_debug config: i386-allyesconfig reproduce: git checkout 871d8c4bbb0f23c29a21b63b1801071766f69b51 make ARCH=i386 allyesconfig make ARCH=i386 All warnings: drivers/net/wireless/ath/wil6210/wmi.c: In function 'wmi_evt_rx_mgmt': >> drivers/net/wireless/ath/wil6210/wmi.c:341:10: warning: unused variable 'ie_len' [-Wunused-variable] size_t ie_len = d_len - offsetof(struct ieee80211_mgmt, ^ >> drivers/net/wireless/ath/wil6210/wmi.c:340:13: warning: unused variable 'ie_buf' [-Wunused-variable] const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable; ^ vim +/ie_len +341 drivers/net/wireless/ath/wil6210/wmi.c 2be7d22f Vladimir Kondratiev 2012-12-20 334 2be7d22f Vladimir Kondratiev 2012-12-20 335 if (ieee80211_is_beacon(fc) || ieee80211_is_probe_resp(fc)) { 2be7d22f Vladimir Kondratiev 2012-12-20 336 struct cfg80211_bss *bss; 8eea944a Vladimir Kondratiev 2014-06-16 337 u64 tsf = le64_to_cpu(rx_mgmt_frame->u.beacon.timestamp); 8eea944a Vladimir Kondratiev 2014-06-16 338 u16 cap = le16_to_cpu(rx_mgmt_frame->u.beacon.capab_info); 8eea944a Vladimir Kondratiev 2014-06-16 339 u16 bi = le16_to_cpu(rx_mgmt_frame->u.beacon.beacon_int); 8eea944a Vladimir Kondratiev 2014-06-16 340 const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable; 8eea944a Vladimir Kondratiev 2014-06-16 341 size_t ie_len = d_len - offsetof(struct ieee80211_mgmt, 8eea944a Vladimir Kondratiev 2014-06-16 342 u.beacon.variable); 8eea944a Vladimir Kondratiev 2014-06-16 343 wil_dbg_wmi(wil, "Capability info : 0x%04x\n", cap); 8eea944a Vladimir Kondratiev 2014-06-16 344 wil_dbg_wmi(wil, "TSF : 0x%016llx\n", tsf); :::::: The code at line 341 was first introduced by commit :::::: 8eea944af0efcdba09dac1ad220c9bfa68293279 wil6210: print more info about BSS found Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix for oops while stopping interfaceVladimir Kondratiev
When interface stopped while running intensive Rx traffic, the following oops observed: [89846.734683] Call trace: [89846.737117] [<ffffffc00083aa64>] dev_gro_receive+0xac/0x358 [89846.742674] [<ffffffc00083ae94>] napi_gro_receive+0x24/0xa4 [89846.748251] [<ffffffbffc1c2f88>] $x+0xec/0x1f8 [wil6210] wil_netif_rx_any [89846.753547] [<ffffffbffc1c4830>] $x+0x34/0x54 [wil6210] wil_release_reorder_frame [89846.758755] [<ffffffbffc1c48ac>] wil_release_reorder_frames+0x5c/0x78 [wil6210] [89846.766044] [<ffffffbffc1c4bf8>] wil_tid_ampdu_rx_free+0x20/0x48 [wil6210] [89846.772901] [<ffffffbffc1bedc8>] $x+0x190/0x1e8 [wil6210] [89846.778285] [<ffffffbffc1c0ed4>] wmi_event_worker+0x230/0x2f8 [wil6210] [89846.784865] [<ffffffc0000b0bc8>] process_one_work+0x278/0x3fc [89846.790591] [<ffffffc0000b1218>] worker_thread+0x200/0x330 [89846.796060] [<ffffffc0000b6664>] kthread+0xac/0xb8 [89846.800836] Code: b940c661 f9406a62 8b010041 f9400026 (f8636882) [89846.807008] ---[ end trace d6fdc17cd27d18f6 ]--- Reason is the following: when removing Rx vring (wil_netdev_ops.ndo_stop -> wil_stop -> wil_down -> __wil_down -> wil_rx_fini), Rx interrupt occurs. It trigger Rx NAPI, calling wil_rx_handle() that reaps (already cleaned) buffer, causing skb referring to garbage memory being set into reorder buffer. Then, network stack trying to access this buffer and fails. Prevent Rx NAPI from being scheduled if device going to stop. Bit wil_status_napi_en reflects NAPI enablement state, check it when triggering Rx NAPI. Testing shows that check for wil_status_napi_en sometimes gets negative, and new error message get printed - in this case kernel oops would be observed. Original oops is no more reproducible. This change requires also changes in the AP flows. Properly enable/disable NAPI for the AP. Make sure Rx VRING is disabled when resetting target. For this, promote __wil_up() and __wil_down() to the module scope, and use it in the relevant flows. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: rename [en|dis]able irq to [un]maskVladimir Kondratiev
To better reflect real action performed, rename: s/wil6210_disable_irq/wil_mask_irq/ s/wil6210_enable_irq/wil_unmask_irq/ Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: introduce separate completion for WMIDedy Lansky
re-use of wmi_ready for both FW ready event and for wmi_call was causing false "FW not ready" indication in case wmi_call() was invoked while reset took place. add wmi_call completion variable instead of re-using wmi_ready. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix race condition between BACK event and Rx dataDedy Lansky
While handling Rx packet, BACK event arrives and frees tid_ampdu_rx array. This causes kernel panic while accessing already freed spinlock The fix is to remove tid_ampdu_rx[]'s spinlock and instead use single sta's spinlock to guard the whole tid_ampdu_rx array. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix usage of print_hex_dump_debugVladimir Kondratiev
When CONFIG_DYNAMIC_DEBUG is not defined, print_hex_dump_debug is mapped directly to print_hex_dump which might cause printout to exist all the time Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: platform specific moduleVladimir Kondratiev
New module (wil_platform) for handling platform specific tasks Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: coding style fixesVladimir Kondratiev
- parentheses, indentation, typos - seq_puts() instead of seq_printf() with single argument - sizeof(var) vs. sizeof(type) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: firmware downloadVladimir Kondratiev
Firmware download implemented but is still experimental feature; flag controlling it added, no_fw_load. It is true by default, use no_fw_load=N to activate feature. Reset flows also got some adjustment for the fw download to work Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25wil6210: fix beamforming data reportingVladimir Kondratiev
When reading 'bf' file on debugfs, query beam forming status from firmware. Ignore CID's that return error or return all zeros. Remove obsolete code that used to maintain statistics on per-device basis, as now it is reported be per-CID and current. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-13 16:34:27 +0000