summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
2013-09-26ath9k: avoid accessing MRC registers on single-chain devicesFelix Fietkau
commit a1c781bb20ac1e03280e420abd47a99eb8bbdd3b upstream. They are not implemented, and accessing them might trigger errors Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26ath9k: fix rx descriptor related race conditionFelix Fietkau
commit e96542e55a2aacf4bdeccfe2f17b77c4895b4df2 upstream. Similar to a race condition that exists in the tx path, the hardware might re-read the 'next' pointer of a descriptor of the last completed frame. This only affects non-EDMA (pre-AR93xx) devices. To deal with this race, defer clearing and re-linking a completed rx descriptor until the next one has been processed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26ath9k: always clear ps filter bit on new assocFelix Fietkau
commit 026d5b07c03458f9c0ccd19c3850564a5409c325 upstream. Otherwise in some cases, EAPOL frames might be filtered during the initial handshake, causing delays and assoc failures. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22ath9k: Enable PLL fix only for AR9340/AR9330Sujith Manoharan
The PLL hang workaround is required only for AR9330 and AR9340. This issue was first observed on an AP121 and the WAR is enabled for AR9340 also (DB120 etc.), since it uses a PLL design identical to AR9330. This is not required for AR9485 and AR9550. Various bugs have been reported regarding this: https://bugzilla.redhat.com/show_bug.cgi?id=997217 https://bugzilla.redhat.com/show_bug.cgi?id=994648 Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-22ath9k_htc: Restore skb headroom when returning skb to mac80211Helmut Schaa
ath9k_htc adds padding between the 802.11 header and the payload during TX by moving the header. When handing the frame back to mac80211 for TX status handling the header is not moved back into its original position. This can result in a too small skb headroom when entering ath9k_htc again (due to a soft retransmission for example) causing an skb_under_panic oops. Fix this by moving the 802.11 header back into its original position before returning the frame to mac80211 as other drivers like rt2x00 or ath5k do. Reported-by: Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Tested-by: Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-08-21mac80211: add a flag to indicate CCK support for HT clientsFelix Fietkau
brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4f1aaf1d0e2e6875e34b2c9595897bef6 "mac80211/minstrel_ht: fix cck rate sampling" Cc: stable@vger.kernel.org # 3.10 Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-29Merge branch 'for-linville-current' of git://github.com/kvalo/athJohn W. Linville
2013-07-22ath: wil6210: Fix build errorLarry Finger
Building driver wil6210 in 3.10 and 3.11 kernels yields the following errors: CC [M] drivers/net/wireless/ath/wil6210/debugfs.o drivers/net/wireless/ath/wil6210/debugfs.c: In function 'wil_print_ring': drivers/net/wireless/ath/wil6210/debugfs.c:163:11: error: pointer targets in passing argument 5 of 'hex_dump_to_buffer' differ in signedness [-Werror=pointer-sign] false); ^ In file included from include/linux/kernel.h:13:0, from include/linux/cache.h:4, from include/linux/time.h:4, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/linux/printk.h:361:13: note: expected 'char *' but argument is of type 'unsigned char *' extern void hex_dump_to_buffer(const void *buf, size_t len, ^ drivers/net/wireless/ath/wil6210/debugfs.c: In function 'wil_txdesc_debugfs_show': drivers/net/wireless/ath/wil6210/debugfs.c:429:10: error: pointer targets in passing argument 5 of 'hex_dump_to_buffer' differ in signedness [-Werror=pointer-sign] sizeof(printbuf), false); ^ In file included from include/linux/kernel.h:13:0, from include/linux/cache.h:4, from include/linux/time.h:4, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/linux/printk.h:361:13: note: expected 'char *' but argument is of type 'unsigned char *' extern void hex_dump_to_buffer(const void *buf, size_t len, ^ cc1: all warnings being treated as errors make[5]: *** [drivers/net/wireless/ath/wil6210/debugfs.o] Error 1 make[4]: *** [drivers/net/wireless/ath/wil6210] Error 2 make[3]: *** [drivers/net/wireless/ath] Error 2 make[2]: *** [drivers/net/wireless] Error 2 make[1]: *** [drivers/net] Error 2 make: *** [drivers] Error 2 These errors are fixed by changing the type of the buffer from "unsigned char *" to "char *". Reported-by: Thomas Fjellstrom <thomas@fjellstrom.ca> Tested-by: Thomas Fjellstrom <thomas@fjellstrom.ca> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.10] Cc: Thomas Fjellstrom <thomas@fjellstrom.ca> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22ath9k_htc: reboot firmware if it was loadedOleksij Rempel
Currently ath9k_htc will reboot firmware only if interface was ever started. Which lead to the problem in case where interface was never started but module need to be reloaded. This patch will partially fix bug "ath9k_htc: Target is unresponsive" https://github.com/qca/open-ath9k-htc-firmware/issues/1 Reproduction case: - plug adapter - make sure nothing will touch it. Stop Networkmanager or blacklist mac address of this adapter. - rmmod ath9k_htc; sleep 1; modprobe ath9k_htc Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Cc: <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22ath9k_htc: do some initial hardware configurationOleksij Rempel
Currently we configure harwdare and clock, only after interface start. In this case, if we reload module or reboot PC without configuring adapter, firmware will freeze. There is no software way to reset adpter. This patch add initial configuration and set it in disabled state, to avoid this freeze. Behaviour of this patch should be similar to: ifconfig wlan0 up; ifconfig wlan0 down. Bug: https://github.com/qca/open-ath9k-htc-firmware/issues/1 Tested-by: Bo Shi <cnshibo@gmail.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Cc: <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22ath10k: ATH10K should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `ath10k_skb_unmap': drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath10k_skb_map': drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_htt_rx_ring_free': drivers/net/wireless/ath/ath10k/htt_rx.c:113: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath10k_htt_rx_amsdu_pop': drivers/net/wireless/ath/ath10k/htt_rx.c:296: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/htt_rx.c:389: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `__ath10k_htt_rx_ring_fill_n': drivers/net/wireless/ath/ath10k/htt_rx.c:146: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/htt_rx.c:150: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_htt_rx_attach': drivers/net/wireless/ath/ath10k/htt_rx.c:474: undefined reference to `dma_alloc_coherent' drivers/net/wireless/ath/ath10k/htt_rx.c:509: undefined reference to `dma_free_coherent' drivers/net/wireless/ath/ath10k/htt_rx.c:514: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ath10k_htt_rx_detach': drivers/net/wireless/ath/ath10k/htt_rx.c:220: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/htt_rx.c:228: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ath10k_skb_map': drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_skb_unmap': drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath10k_skb_map': drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_skb_unmap': drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-07-18ath9k_hw: Fix multicast search for AR9002 familySujith Manoharan
The multicast search bit is disabled for the AR9003 family, but this is required for AR9002 too. Fix this in the INI override routine. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-18ath5k: fix extra set bit in multicast maskBob Copeland
Bit 32 was always set which looks to have been accidental, according to git history. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-17ath9k_htc: fix data race between request_firmware_nowait() callback and ↵Alexey Khoroshilov
suspend() ath9k_hif_usb_probe() requests firmware asynchronically and there is some initialization postponed till firmware is ready. In particular, ath9k_hif_usb_firmware_cb() callback initializes hif_dev->tx.tx_buf and hif_dev->tx.tx_pending lists. At the same time, ath9k_hif_usb_suspend() iterates that lists through ath9k_hif_usb_dealloc_urbs(). If suspend happens before request_firmware_nowait() callback is called, it can lead to oops. Similar issue could be in ath9k_hif_usb_disconnect(), but it is prevented using hif_dev->fw_done completion and HIF_USB_READY flag. The patch extends this approach to suspend() as well. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-17ath9k: fix tx pending frames accounting for dropped packetsFelix Fietkau
When dropping packets that have gone far enough into the tx path, the pending frame counter needs to be decreased. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "This is a re-do of the net-next pull request for the current merge window. The only difference from the one I made the other day is that this has Eliezer's interface renames and the timeout handling changes made based upon your feedback, as well as a few bug fixes that have trickeled in. Highlights: 1) Low latency device polling, eliminating the cost of interrupt handling and context switches. Allows direct polling of a network device from socket operations, such as recvmsg() and poll(). Currently ixgbe, mlx4, and bnx2x support this feature. Full high level description, performance numbers, and design in commit 0a4db187a999 ("Merge branch 'll_poll'") From Eliezer Tamir. 2) With the routing cache removed, ip_check_mc_rcu() gets exercised more than ever before in the case where we have lots of multicast addresses. Use a hash table instead of a simple linked list, from Eric Dumazet. 3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski, Marek Puzyniak, Michal Kazior, and Sujith Manoharan. 4) Support reporting the TUN device persist flag to userspace, from Pavel Emelyanov. 5) Allow controlling network device VF link state using netlink, from Rony Efraim. 6) Support GRE tunneling in openvswitch, from Pravin B Shelar. 7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from Daniel Borkmann and Eric Dumazet. 8) Allow controlling of TCP quickack behavior on a per-route basis, from Cong Wang. 9) Several bug fixes and improvements to vxlan from Stephen Hemminger, Pravin B Shelar, and Mike Rapoport. In particular, support receiving on multiple UDP ports. 10) Major cleanups, particular in the area of debugging and cookie lifetime handline, to the SCTP protocol code. From Daniel Borkmann. 11) Allow packets to cross network namespaces when traversing tunnel devices. From Nicolas Dichtel. 12) Allow monitoring netlink traffic via AF_PACKET sockets, in a manner akin to how we monitor real network traffic via ptype_all. From Daniel Borkmann. 13) Several bug fixes and improvements for the new alx device driver, from Johannes Berg. 14) Fix scalability issues in the netem packet scheduler's time queue, by using an rbtree. From Eric Dumazet. 15) Several bug fixes in TCP loss recovery handling, from Yuchung Cheng. 16) Add support for GSO segmentation of MPLS packets, from Simon Horman. 17) Make network notifiers have a real data type for the opaque pointer that's passed into them. Use this to properly handle network device flag changes in arp_netdev_event(). From Jiri Pirko and Timo Teräs. 18) Convert several drivers over to module_pci_driver(), from Peter Huewe. 19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a O(1) calculation instead. From Eric Dumazet. 20) Support setting of explicit tunnel peer addresses in ipv6, just like ipv4. From Nicolas Dichtel. 21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet. 22) Prevent a single high rate flow from overruning an individual cpu during RX packet processing via selective flow shedding. From Willem de Bruijn. 23) Don't use spinlocks in TCP md5 signing fast paths, from Eric Dumazet. 24) Don't just drop GSO packets which are above the TBF scheduler's burst limit, chop them up so they are in-bounds instead. Also from Eric Dumazet. 25) VLAN offloads are missed when configured on top of a bridge, fix from Vlad Yasevich. 26) Support IPV6 in ping sockets. From Lorenzo Colitti. 27) Receive flow steering targets should be updated at poll() time too, from David Majnemer. 28) Fix several corner case regressions in PMTU/redirect handling due to the routing cache removal, from Timo Teräs. 29) We have to be mindful of ipv4 mapped ipv6 sockets in upd_v6_push_pending_frames(). From Hannes Frederic Sowa. 30) Fix L2TP sequence number handling bugs, from James Chapman." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits) drivers/net: caif: fix wrong rtnl_is_locked() usage drivers/net: enic: release rtnl_lock on error-path vhost-net: fix use-after-free in vhost_net_flush net: mv643xx_eth: do not use port number as platform device id net: sctp: confirm route during forward progress virtio_net: fix race in RX VQ processing virtio: support unlocked queue poll net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Documentation: Fix references to defunct linux-net@vger.kernel.org net/fs: change busy poll time accounting net: rename low latency sockets functions to busy poll bridge: fix some kernel warning in multicast timer sfc: Fix memory leak when discarding scattered packets sit: fix tunnel update via netlink dt:net:stmmac: Add dt specific phy reset callback support. dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 dt:net:stmmac: Allocate platform data only if its NULL. net:stmmac: fix memleak in the open method ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available net: ipv6: fix wrong ping_v6_sendmsg return value ...
2013-07-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) treewide: relase -> release Documentation/cgroups/memory.txt: fix stat file documentation sysctl/net.txt: delete reference to obsolete 2.4.x kernel spinlock_api_smp.h: fix preprocessor comments treewide: Fix typo in printk doc: device tree: clarify stuff in usage-model.txt. open firmware: "/aliasas" -> "/aliases" md: bcache: Fixed a typo with the word 'arithmetic' irq/generic-chip: fix a few kernel-doc entries frv: Convert use of typedef ctl_table to struct ctl_table sgi: xpc: Convert use of typedef ctl_table to struct ctl_table doc: clk: Fix incorrect wording Documentation/arm/IXP4xx fix a typo Documentation/networking/ieee802154 fix a typo Documentation/DocBook/media/v4l fix a typo Documentation/video4linux/si476x.txt fix a typo Documentation/virtual/kvm/api.txt fix a typo Documentation/early-userspace/README fix a typo Documentation/video4linux/soc-camera.txt fix a typo lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment ...
2013-06-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: net/wireless/nl80211.c
2013-06-27ath10k: minimally handle new channel width enumeration valuesJohn W. Linville
CC drivers/net/wireless/ath/ath10k/mac.o drivers/net/wireless/ath/ath10k/mac.c: In function ‘chan_to_phymode’: drivers/net/wireless/ath/ath10k/mac.c:229:3: warning: enumeration value ‘NL80211_CHAN_WIDTH_5’ not handled in switch [-Wswitch] drivers/net/wireless/ath/ath10k/mac.c:229:3: warning: enumeration value ‘NL80211_CHAN_WIDTH_10’ not handled in switch [-Wswitch] drivers/net/wireless/ath/ath10k/mac.c:247:3: warning: enumeration value ‘NL80211_CHAN_WIDTH_5’ not handled in switch [-Wswitch] drivers/net/wireless/ath/ath10k/mac.c:247:3: warning: enumeration value ‘NL80211_CHAN_WIDTH_10’ not handled in switch [-Wswitch] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27ath9k_htc: ifdef out IFTYPE_MESH advertisementThomas Pedersen
This is needed so the interface combination can still be validated when CONFIG_MAC80211_MESH is not enabled. Otherwise wiphy registration fails. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27ath10k: leave MMIC generation to the HWMichal Kazior
Apparently HW doesn't require us to generate MMIC for TKIP suite. Each frame was 8 bytes longer than it should be and some APs would drop frames that exceed 1520 bytes of 802.11 payload. This could be observed during throughput tests or fragmented IP traffic. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27ath10k: fix 5ghz channel definitionsMichal Kazior
Nonsense channel flags were being set. Although it doesn't seem this was visible to the user the patch makes sure that channel availability won't be crippled in the future if ath_common behaviour changes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27ath10k: fix MSI-X setup failpathMichal Kazior
Irqs were not freed up correctly upon msi-x setup failure. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27ath9k: Add mix tx gain table for AR9462 2.0Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-26Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-06-24ath9k: Add support for AR9462 2.1Sujith Manoharan
Various parts of the HW code are applicable for both v2.0 and v2.1. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k: Program initvals for AR9462 2.1Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k: Add initvals for AR9462 2.1Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k: Add version macros for AR9462 2.1Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24wil6210: add HW write-back option in TX descriptorKirshenbaum Erez
Map BIT 9 in TX DMA DWARD 0 as HW write back option. We must turn on this option in the last TX descriptor, this is required for old HW compatability. This option indicate to HW that WB is required for this descriptor. Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24wil6210: set vring index for all descriptorsKirshenbaum Erez
The vring index (MAC queue id) must be set in all TX descriptors otherwise HW will fail to release descriptors for a specific vring (disconnect or vring switch flows). This is normally occurs when fragmentation required, if vring index will not be the same for all SKB descriptors HW will fail to flush this MAC queue. Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k: Enable WoW only for supported modelsSujith Manoharan
Since platform support is required for WoW, identify and and enable Wow only for supported cards. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k: fix queue depth accounting in ath_tx_txqaddbufFelix Fietkau
ath_tx_txqaddbuf assumes that all the linked buffers in the queue passed to it are part of the same A-MPDU or MPDU. The CAB queue rework violates this assumption, which can cause the internal queue depth to go negative. Fix this by increasing the counter for all slots of [bf, bf->bf_lastbf] Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k_htc: Add ethtool stats support.Ben Greear
This provides some of the same info found in the ath9k_htc debugfs through the standard ethtool stats API. This logic is only supported when ath9k_htc debugfs kernel feature is enabled, since that is the only time stats are actually gathered. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k_htc: Support reporting tx and rx chain mask.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k_htc: Handle IDLE state transition properlySujith Manoharan
Make sure that a chip reset is done when IDLE is turned off - this fixes authentication timeouts. Cc: stable@vger.kernel.org Reported-by: Ignacy Gawedzki <i@lri.fr> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k: fix an RCU issue in calling ieee80211_get_tx_ratesFelix Fietkau
ath_txq_schedule is called outside of the drv_tx call, so it needs RCU protection. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: net/wireless/nl80211.c
2013-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/Kconfig drivers/net/xen-netback/netback.c net/batman-adv/bat_iv_ogm.c net/wireless/nl80211.c The ath9k Kconfig conflict was a change of a Kconfig option name right next to the deletion of another option. The xen-netback conflict was overlapping changes involving the handling of the notify list in xen_netbk_rx_action(). Batman conflict resolution provided by Antonio Quartulli, basically keep everything in both conflict hunks. The nl80211 conflict is a little more involved. In 'net' we added a dynamic memory allocation to nl80211_dump_wiphy() to fix a race that Linus reported. Meanwhile in 'net-next' the handlers were converted to use pre and post doit handlers which use a flag to determine whether to hold the RTNL mutex around the operation. However, the dump handlers to not use this logic. Instead they have to explicitly do the locking. There were apparent bugs in the conversion of nl80211_dump_wiphy() in that we were not dropping the RTNL mutex in all the return paths, and it seems we very much should be doing so. So I fixed that whilst handling the overlapping changes. To simplify the initial returns, I take the RTNL mutex after we try to allocate 'tb'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-18ath9k: Program initvals for CUS217Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Add initvals required for CUS217Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Add PCI IDs for CUS217Sujith Manoharan
CUS217 is a card based on AR9462. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath10k: off by one sanity checkDan Carpenter
This should be >= ARRAY_SIZE() instead of > ARRAY_SIZE(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Modify IDs to identify CUS230Sujith Manoharan
CUS198 and CUS230 are similar cards, both are AR9485 + xLNA solutions. But, the subsystem IDs differ - identify CUS230 explicitly to make things clearer. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Add support for 5G-XLNA/AR9462Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Update AR9462 2.0 initvalsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Convert a couple of debug messagesSujith Manoharan
Use the REGULATORY debug level to print the target power details. EEPROM can be used for other purposes and this spams the log. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Merge HWTIMER debug level with BTCOEXSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18treewide: Fix typo in printkMasanari Iida
Correct spelling typo in printk within various drivers. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-10 02:46:28 +0000