summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
AgeCommit message (Collapse)Author
2014-01-03Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-12-19cfg80211: Add support for QoS mappingKyeyoon Park
This allows QoS mapping from external networks to be implemented as defined in IEEE Std 802.11-2012, 10.24.9. APs can use this to advertise DSCP ranges and exceptions for mapping frames to a specific UP over Wi-Fi. The payload of the QoS Map Set element (IEEE Std 802.11-2012, 8.4.2.97) is sent to the driver through the new NL80211_ATTR_QOS_MAP attribute to configure the local behavior either on the AP (based on local configuration) or on a station (based on information received from the AP). Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18brcmfmac: Combine protocol push hdr and bus txdata.Hante Meuleman
For the transmission of data a protocol push hdr is performed followed by a bus txdata call. For the new protocol msgbuf this is not workable. Since they are already "loosely" coupled for bcdc protocol they are combined. This means that txdata will go "through" the protocol layer and a seperate protocol push hdr will not be needed anymore. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: add missing curly braces in brcmf_fws_txstatus_suppressed()Arend van Spriel
The 0-day testing from Fenguang Wu issued the following warning: tree: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master head: 4b074b07625f603d40d4d04937f8874a00415dc4 commit: 1e86d69662d7d86360624f74bbe1b5fa1b8ffb13 [33/59] brcmfmac: Update fwsignal to fix out of order tx. >> drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1393:2-56: code aligned with following code on line 1394 vim +1393 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c 84bcc0c3 1387 } 84bcc0c3 1388 84bcc0c3 1389 entry->generation = genbit; 84bcc0c3 1390 2747e5f7 1391 ret = brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb); 2747e5f7 1392 if (ret == 0) 1e86d696 @1393 brcmf_skb_htod_tag_set_field(skb, GENERATION, .. 1e86d696 @1394 brcmf_skbcb(skb)->htod_seq = seq; 1e86d696 1395 if (brcmf_skb_htod_seq_get_field(skb, FROMFW)) { 1e86d696 1396 brcmf_skb_htod_seq_set_field(skb, .. 1e86d696 1397 brcmf_skb_htod_seq_set_field(skb, .. This warning is valid and the if statement needs curly braces here. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: Dynamically register a protocol layer.Hante Meuleman
BCDC is the default protocol layer and being called directly. This patch installs the functions for this layer dynamically. This allows new protocols to be added and selected dynamically depending on the hw capabilties. As currently only BCDC is supported this is always the installed protocol. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: removed dhd_proto.h.Hante Meuleman
dhd_proto.h was cleaned up and prototypes were moved to dhd.h. dhd_proto.h was removed. This is a step in cleaning and restucturing protocol layer. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: fix driver build issue when CONFIG_BRCMDBG is not setArend van Spriel
When CONFIG_BRCMDBG is not set we get the following build issue: CC [M] drivers/net/wireless/brcm80211/brcmfmac/fwsignal.o drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c: In function ‘brcmf_fws_hdrpush’: drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:852:18: error: ‘BRCMF_FWS_TYPE_SEQ_LEN’ undeclared The define BRCMF_FWS_TYPE_SEQ_LEN was introduced by: commit 6918f38e4ed4e0493a90a4331e0033bdfc806e00 Author: Hante Meuleman <meuleman@broadcom.com> Date: Wed Oct 23 14:58:51 2013 +0200 brcmfmac: Update fwsignal to fix out of order tx. Unfortunately, it was put in conditional part of the source file under #ifdef DEBUG. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: Update fwsignal to fix out of order tx.Hante Meuleman
When using fwsignal it is possible that tx packets get delivered out of order. This patch fixes that by reordering suppressed packets and tracking generation bit and sequence number per packet. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-03brcmfmac: reserve memory for bus layer in sk_buff::cbFranky Lin
Bus layer need to share sk_buff::cb with firmware signal feature. Reserve necessary memory so they won't overwrite each other. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-15brcmfmac: no fws locking outside fws module.Hante Meuleman
FWS uses locking to protect its data while being called from various entries. On bus_txdata the lock was kept resulting in unnecessary long locking, but also creating possibility for deadlock. This update changes the locking to release lock when bus_txdata is called. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-15brcmfmac: always use worker thread for tx data.Hante Meuleman
When fw signalling is disabled tx is sent immediately. Using queues and worker thread allows usb to do synchronous autopm. This patch makes fws use queues and worker thread even if signalling is not supported by FW or not enabled. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-15brcmfmac: add AMPDU reordering functionalityArend van Spriel
This feature moves the responsibility of collecting all MPDUs in an AMPDU session in the correct order from the firmware to the host driver. This reduces buffer requirement on the firmware side. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-15brcmfmac: .txdata() bus callback should not call brcmf_txcomplete()Arend van Spriel
With firmware-signalling the packet handed to the bus specific driver layer should not be discarded with brcmf_txcomplete() in the failure path. Instead only an error is returned and the caller decides what to do with the packet. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22brcmfmac: decrement pending 8021x count upon tx failureArend van Spriel
If the transmit fails because there are no hanger slots or any other reason and the packet was an EAPOL packet the pending counter should be decreased although it was not transmitted so the driver does not end up in a dead-lock. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: reduce firmware-signalling locking scope in rx pathArend van Spriel
In the receive path a spinlock is taken upon parsing the TLV signal header. This moves to locking to the TLV handling functions where it protects the data structures. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: cleanup debug messages in brcmf_fws_hdrpush()Arend van Spriel
Trivial cleanup of debug messages. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: tag packet in the netdev transmit callbackArend van Spriel
Transmit packets needs to be tagged in order to receive a tx status feedback from the firmware. Determine the tag in the netdev transmit callback instead of determining the tag just before transfer to the device. This reduces the number of exception flows and hence makes the driver code simpler. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: remove (ab)use of NL80211_NUM_ACSArend van Spriel
Used NL80211_NUM_ACS to indicate the BCMC fifo used in the driver which has the same value now, but it is a bad idea relying on that. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: simplify transmit pathArend van Spriel
When getting a transmit packet from the networking layer simply enqueue the packet unconditional and have it handled by the dequeue worker. The transfer of the packet to the bus-specific driver part is now done from one context. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18brcmfmac: consolidate mac_descriptor related function namesArend van Spriel
Just cleaning up and being consistent in naming operations related to struct brcmf_fws_mac_descriptor objects. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18brcmfmac: remove dependency with nl80211.hArend van Spriel
The firmware-signalling code used NL80211_NUM_ACS, but it has its own definition enum brcmf_fws_fifo, which is more appropriate to use. This effectively removes the need to include nl80211.h. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18brcmfmac: rename variable prec to more appropriate name, ie. fifoArend van Spriel
The term prec (precedence) is different from the fifo number. Rename use of prec with fifo to be consistent and clear. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18brcmfmac: Only use credits for bcmc when firmware indicates it.Hante Meuleman
The firmware will sent an event message when bc/mc traffic should be sent to the device using credit mechanism. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: add debugfs statistics for firmware-signallingArend van Spriel
Added statistics for flow-control and packets dropped by the driver. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: Always use fifo_credits, also for requested credits.Hante Meuleman
Currently firmware requested credits do not require fifo credits. From a buffer management point of view this is incorrect. So firwmware requested credits require also fifo credits before the packet can be transferred to the host. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: Sent TIM information in case of data available.Arend van Spriel
When data is available and fw signalling is enabled then TIM information should be sent to firmware. If it can piggy back on existing packet then do that otherwise create dummy packet to get information out. Cc: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: fix send_pkts statistic counter in firmware-signallingArend van Spriel
The statistic counter send_pkts was wrongly counted conditionally. Correcting the mistake. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: Simplify counting transit count.Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: Fix endless loop when brcmf_fws_commit_skb fails.Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: Signalling header push and pull on logic places.Hante Meuleman
Currently suppressed packets get enque-ed with header which then gets pulled before transmit. It is more logical and clean to pull the header on return and push it unconditionally on xmit. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: Accept only first creditmap event.Hante Meuleman
During P2P testing it turned out that the firmware sents multiple multiple creditmap event messages. Only the first message from the firmware should be processed. Otherwise the firmware-signalled flow control can run haywire when it has packets outstanding in firmware. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: fix invalid ifp lookup in firmware-signallingHante Meuleman
The destination entries for firmware-signalled flow control have the interface id stored. This needs to be translated to bsscfg index when looking up the ifp object for the interface. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: Find correct MAC descriptor in case of TDLS.Hante Meuleman
In case of TDLS find the correct MAC descriptor for fw signalling data. In case of TDLS each destination gets its own entry. This was not handled correctly for P2P client. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: Correct creditmap when credit borrowing is active.Hante Meuleman
When credit borrowing is active the BE credits have been depleted, however the worker should still be scheduled. In case of credit borrowing correct credit map to make sure worker remains active. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: For FW signalling it is necessary to track gen bit.Hante Meuleman
Store gen bit on suppressed packet per entry and use latest stored version for each packet which gets transmitted to fw. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: reducing debug logging in firmware-signalling codeArend van Spriel
The debug logging in firmware-signalling code was rather extensive and for a large part in the data path. This patch removes large part or the level is changed to DATA level. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: explicitly indicate sk_buff is sent upon request creditArend van Spriel
Firmware can request the driver for transmit packets using two different signals. Only for one signal a flag was set in the sk_buff control buffer. This patch adds explicit flag for the other signal as well. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: rework credit pickup to assure consistent handlingArend van Spriel
Reworked brcmf_skb_pick_up_credit() so it can be used for both fcmode flavours in the same way. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: Take bus flowcontrol at credit mgmt into account.Hante Meuleman
On bus flow control (no more host bus resources to send packets to device) the netif flow control was toggled, however credit management should also take this status into account. Since there are multiple sources handling this flow control necessary spinlocks were added to protect flow control related data/states. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: remove fifo bitfield from brcmf_skbuff_cb::if_flagsArend van Spriel
The brcmf_skbuff_cb structure contain if_flags and htod fields. Both have a bitfield defined to hold the fifo number. With a small code change we get rid of the fifo bitfield in if_flags. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmfmac: allow firmware-signal tlv to be longer than specifiedArend van Spriel
The firmware-signal API specification defines length for the different tlv. During testing on different devices it turned out not all firmware used the tlv length according specification. Therefore the length check is made less strict with this patch. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23brcmfmac: add credit borrowing mechanismArend van Spriel
The firmware provides credits to the driver per WMM-AC. When only AC_BE are to be transmitted to the firmware the driver may use credits from other priorities to send AC_BE packets towards the firmware. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23brcmfmac: correct error handling in brcmf_fws_init()Arend van Spriel
In brcmf_fws_init() the error flows were not properly handled and the caller ignored the return value. The only action that is allowed to fail in brcmf_fws_init() is setting the tlv in firmware as the feature is not supported on all devices. Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23brcmfmac: flush queue upon MACDESC_DEL firmware signalArend van Spriel
When firmware signals the driver to remove a destination entry it may have sk_buff packets queued for it. These should be freed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: fix potential NULL pointer dereference in ↵Wei Yongjun
brcmf_fws_flow_control_check() The dereference to 'ifp' in debug code should be moved below the NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: stop dequeue upon sk_buff commit failureArend van Spriel
In the dequeue worker the function brcmf_commit_skb() is called. However, instead of increment the credit count upon success it should break the for loop upon failure. Otherwise, it will result in an endless loop. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: change return type for brcmf_rollback_toq() to voidArend van Spriel
The function brcmf_rollback_toq() is already called in error path and its result should not override the initial error value. As the function releases the sk_buff there is no need to return anything so change return type to void. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: finalize transmit upon any rollback failureArend van Spriel
All rollback failures should result in freeing of the sk_buff by calling brcmf_txfinalize(). Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: use lock in brcmf_fws_del_interface()Arend van Spriel
When deleting an interface in firmware-signalling module it will clear any destination descriptors. To avoid concurrency issues it should take the lock using brcmf_fws_lock(). Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: schedule dequeue upon firmware-signal receptionArend van Spriel
Several firmware signals should be considered as opportunity to send packets to the firmware. This patch adds conditional scheduling of the dequeue worker thread while handling those signals. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-23 12:52:31 +0000