summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi
AgeCommit message (Collapse)Author
2012-06-17iwlwifi: don't mess up the SCD when removing a keyEmmanuel Grumbach
commit d6ee27eb13beab94056e0de52d81220058ca2297 upstream. When we remove a key, we put a key index which was supposed to tell the fw that we are actually removing the key. But instead the fw took that index as a valid index and messed up the SRAM of the device. This memory corruption on the device mangled the data of the SCD. The impact on the user is that SCD queue 2 got stuck after having removed keys. The message is the log that was printed is: Queue 2 stuck for 10000ms This doesn't seem to fix the higher queues that get stuck from time to time. Reviewed-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-10iwlwifi: update BT traffic load states correctlyMeenakshi Venkataraman
commit 882dde8eb0d49ce0f853f8f4084dde56a21fe55f upstream. When BT traffic load changes from its previous state, a new LQ command needs to be sent down to the firmware. This needs to be done only once per change. The state variable that keeps track of this change is last_bt_traffic_load. However, it was not being updated when the change had been handled. Not updating this variable was causing a flood of advanced BT config commands to be sent to the firmware. Fix this. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-25iwlagn: check for SMPS modeWey-Yi Guy
commit b2ccccdca46273c7b321ecf5041c362cd950da20 upstream. Check and report WARN only when its invalid Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=42621 https://bugzilla.redhat.com/show_bug.cgi?id=766071 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06iwlwifi: update SCD BC table for all SCD queuesEmmanuel Grumbach
commit 96f1f05af76b601ab21a7dc603ae0a1cea4efc3d upstream. Since we configure all the queues as CHAINABLE, we need to update the byte count for all the queues, not only the AGGREGATABLE ones. Not doing so can confuse the SCD and make the fw assert. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-06iwlwifi: allow to switch to HT40 if not associatedWey-Yi Guy
commit 78feb35b8161acd95c33a703ed6ab6f554d29387 upstream. My previous patch 34a5b4b6af104cf18eb50748509528b9bdbc4036 iwlwifi: do not re-configure HT40 after associated Fix the case of HT40 after association on specified AP, but it break the association for some APs and cause not able to establish connection. We need to address HT40 before and after addociation. Reported-by: Andrej Gelenberg <andrej.gelenberg@udo.edu> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Tested-by: Andrej Gelenberg <andrej.gelenberg@udo.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06iwlwifi: do not set the sequence control bit is not neededWey-Yi Guy
commit 123877b80ed62c3b897c53357b622574c023b642 upstream. Check the IEEE80211_TX_CTL_ASSIGN_SEQ flag from mac80211, then decide how to set the TX_CMD_FLG_SEQ_CTL_MSK bit. Setting the wrong bit in BAR frame whill make the firmware to increment the sequence number which is incorrect and cause unknown behavior. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21iwlwifi: do not re-configure HT40 after associatedWey-Yi Guy
commit 34a5b4b6af104cf18eb50748509528b9bdbc4036 upstream. The ht40 setting should not change after association unless channel switch This fix a problem we are seeing which cause uCode assert because driver sending invalid information and make uCode confuse Here is the firmware assert message: kernel: iwlagn 0000:03:00.0: Microcode SW error detected. Restarting 0x82000000. kernel: iwlagn 0000:03:00.0: Loaded firmware version: 17.168.5.3 build 42301 kernel: iwlagn 0000:03:00.0: Start IWL Error Log Dump: kernel: iwlagn 0000:03:00.0: Status: 0x000512E4, count: 6 kernel: iwlagn 0000:03:00.0: 0x00002078 | ADVANCED_SYSASSERT kernel: iwlagn 0000:03:00.0: 0x00009514 | uPc kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink1 kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink2 kernel: iwlagn 0000:03:00.0: 0x0000D1F2 | interruptlink1 kernel: iwlagn 0000:03:00.0: 0x00000000 | interruptlink2 kernel: iwlagn 0000:03:00.0: 0x01008035 | data1 kernel: iwlagn 0000:03:00.0: 0x0000C90F | data2 kernel: iwlagn 0000:03:00.0: 0x000005A7 | line kernel: iwlagn 0000:03:00.0: 0x5080B520 | beacon time kernel: iwlagn 0000:03:00.0: 0xCC515AE0 | tsf low kernel: iwlagn 0000:03:00.0: 0x00000003 | tsf hi kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp1 kernel: iwlagn 0000:03:00.0: 0x29703BF0 | time gp2 kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp3 kernel: iwlagn 0000:03:00.0: 0x000111A8 | uCode version kernel: iwlagn 0000:03:00.0: 0x000000B0 | hw version kernel: iwlagn 0000:03:00.0: 0x00480303 | board version kernel: iwlagn 0000:03:00.0: 0x09E8004E | hcmd kernel: iwlagn 0000:03:00.0: CSR values: kernel: iwlagn 0000:03:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) kernel: iwlagn 0000:03:00.0: CSR_HW_IF_CONFIG_REG: 0X00480303 kernel: iwlagn 0000:03:00.0: CSR_INT_COALESCING: 0X0000ff40 kernel: iwlagn 0000:03:00.0: CSR_INT: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_INT_MASK: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_FH_INT_STATUS: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GPIO_IN: 0X00000030 kernel: iwlagn 0000:03:00.0: CSR_RESET: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GP_CNTRL: 0X080403c5 kernel: iwlagn 0000:03:00.0: CSR_HW_REV: 0X000000b0 kernel: iwlagn 0000:03:00.0: CSR_EEPROM_REG: 0X07d60ffd kernel: iwlagn 0000:03:00.0: CSR_EEPROM_GP: 0X90000001 kernel: iwlagn 0000:03:00.0: CSR_OTP_GP_REG: 0X00030001 kernel: iwlagn 0000:03:00.0: CSR_GIO_REG: 0X00080044 kernel: iwlagn 0000:03:00.0: CSR_GP_UCODE_REG: 0X000093bb kernel: iwlagn 0000:03:00.0: CSR_GP_DRIVER_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP1: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP2: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_LED_REG: 0X00000078 kernel: iwlagn 0000:03:00.0: CSR_DRAM_INT_TBL_REG: 0X88214dd2 kernel: iwlagn 0000:03:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 kernel: iwlagn 0000:03:00.0: CSR_ANA_PLL_CFG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_HW_REV_WA_REG: 0X0001001a kernel: iwlagn 0000:03:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 kernel: iwlagn 0000:03:00.0: FH register values: kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X21316d00 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021479c0 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000060 kernel: iwlagn 0000:03:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries kernel: ------------[ cut here ]------------ WARNING: at net/mac80211/util.c:1208 ieee80211_reconfig+0x1f1/0x407() kernel: Hardware name: 4290W4H kernel: Pid: 1896, comm: kworker/0:0 Not tainted 3.1.0 #2 kernel: Call Trace: kernel: [<ffffffff81036558>] ? warn_slowpath_common+0x73/0x87 kernel: [<ffffffff813b8966>] ? ieee80211_reconfig+0x1f1/0x407 kernel: [<ffffffff8139e8dc>] ? ieee80211_recalc_smps_work+0x32/0x32 kernel: [<ffffffff8139e95a>] ? ieee80211_restart_work+0x7e/0x87 kernel: [<ffffffff810472fa>] ? process_one_work+0x1c8/0x2e3 kernel: [<ffffffff810480c9>] ? worker_thread+0x17a/0x23a kernel: [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b kernel: [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b kernel: [<ffffffff8104ba97>] ? kthread+0x7a/0x82 kernel: [<ffffffff813d21b4>] ? kernel_thread_helper+0x4/0x10 kernel: [<ffffffff8104ba1d>] ? kthread_flush_work_fn+0x11/0x11 kernel: [<ffffffff813d21b0>] ? gs_change+0xb/0xb Reported-by: Udo Steinberg <udo@hypervisor.org> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-11iwlagn: do not use interruptible waitsJohannes Berg
Upstream commit effd4d9aece9184f526e6556786a94d335e38b71. Since the dawn of its time, iwlwifi has used interruptible waits to wait for synchronous commands and firmware loading. This leads to "interesting" bugs, because it can't actually handle the interruptions; for example when a command sending is interrupted it will assume the command completed fully, and then leave it pending, which leads to all kinds of trouble when the command finishes later. Since there's no easy way to gracefully deal with interruptions, fix the driver to not use interruptible waits. This at least fixes the error iwlagn 0000:02:00.0: Error: Response NULL in 'REPLY_SCAN_ABORT_CMD' I have seen in P2P testing, but it is likely that there are other errors caused by this. Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03iwlagn: fix dangling scan requestJohannes Berg
commit 6c80c39d9a6986a566c30d797aae37bfb697eea3 upstream. If iwl_scan_initiate() fails for any reason, priv->scan_request and priv->scan_vif are left dangling. This can lead to a crash later when iwl_bg_scan_completed() tries to run a pending scan request. In practice, this seems to be very rare due to the STATUS_SCANNING check earlier. That check, however, is wrong -- it should allow a scan to be queued when a reset/roc scan is going on. When a normal scan is already going on, a new one can't be issued by mac80211, so that code can be removed completely. I introduced this bug when adding off-channel support in commit 266af4c745952e9bebf687dd68af58df553cb59d. Reported-by: Peng Yan <peng.yan@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03iwlagn: workaround bug crashing some APsDon Fry
commit 2249b011432ca3dcce112f0f71e0f531b4bb9347 upstream. This patch reverts commit 9b7688328422b88a7a15dc0dc123ad9ab1a6e22d which was introduced in 2.6.38-rc1. It works around a problem where the iwlagn driver stimulates a bug crashing (requiring power cycle to recover) some APs under heavy traffic. Signed-off-by: Don Fry <donald.h.fry@intel.com> SIgned-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03iwlagn: fix command queue timeoutJohannes Berg
commit 282cdb325aea4ebbc42ce753b47cc96145eb54bc upstream. If the command queue is constantly busy, which can happen in P2P, the hangcheck timer will frequently find a command in it and will eventually reset the device because nothing sets the timestamp for this queue when commands are processed. Fix this by setting the timestamp when a command completes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-15iwlagn: 5000 do not support idle modeWey-Yi Guy
commit f35291082294ca6737953bbe4e9491ede04ab822 upstream. 5000 series has issue supporting power save idle mode: commit 9dc2153315650eae220898668b6aa56a25c130be iwlwifi: always support idle mode for agn devices For agn devices, always support idle mode which help power consumption in idle unassociated state. the above changes cause 5000 become not stable when power management is "on" http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2312 Reported-by: Devin J. Pohly <djpohly+iwl@gmail.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Devin J. Pohly <djpohly+iwl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28iwlagn: use PCI_DMA_* for pci_* operationsJohn W. Linville
"iwlagn: map command buffers BIDI" uses the DMA_* enumerations for DMA directions, even though the pci_* DMA API is still in use. That patch was undoubtedly developed on top of "iwlagn: don't use the PCI wrappers for DMA operation", which is due in the next release. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27iwlagn: fix *_UCODE_API_MAX output in the firmware fieldEvgeni Golov
Currently (3.0-rc2), modinfo iwlagn shows: firmware: iwlwifi-5150-IWL5150_UCODE_API_MAX.ucode firmware: iwlwifi-5000-IWL5000_UCODE_API_MAX.ucode firmware: iwlwifi-6000g2b-IWL6000G2_UCODE_API_MAX.ucode firmware: iwlwifi-6000g2a-IWL6000G2_UCODE_API_MAX.ucode firmware: iwlwifi-6050-IWL6050_UCODE_API_MAX.ucode firmware: iwlwifi-6000-IWL6000_UCODE_API_MAX.ucode firmware: iwlwifi-100-IWL100_UCODE_API_MAX.ucode firmware: iwlwifi-1000-IWL1000_UCODE_API_MAX.ucode firmware: iwlwifi-105-IWL105_UCODE_API_MAX.ucode firmware: iwlwifi-2030-IWL2030_UCODE_API_MAX.ucode firmware: iwlwifi-2000-IWL2000_UCODE_API_MAX.ucode which is obviously wrong, the user should not see the *_UCODE_API_MAX macros but the actual ucode API versions here. The problem are the #define *_MODULE_FIRMWARE(api) *_FW_PRE #api ".ucode" which do not expand api correctly (because this is a macro itself). Fixed by using __stringify() from linux/stringify.h. Further information about macro stringification can be found here: http://gcc.gnu.org/onlinedocs/cpp/Stringification.html Signed-off-by: Evgeni Golov <sargentd@die-welt.net> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27iwlagn: map command buffers BIDIJohannes Berg
Evidently, the device sometimes wants to write back to command buffers, even if I see no reason why it should. Allow it to do that. Tested-by: Andy Lutomirski <luto@mit.edu> Tested-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-27iwlagn: fix cmd queue unmapJohannes Berg
When we stop the device while a command is in flight that uses multiple TBs, we can leak the DMA buffers for the second and higher TBs. Fix this by using iwlagn_unmap_tfd() as we do when we normally recover the entry. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-24iwlagn: fix change_interface for P2P typesJohannes Berg
When an interface changes type to a P2P type, iwlagn will erroneously set vif->type to the P2P type and not the reduced/split type. Fix this by keeping "newtype" in another variable for the assignment to vif->type. Cc: stable@kernel.org [2.6.38+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-24iwlagn: Fix a bug introduced by the HUGE command removalEmmanuel Grumbach
Since we don't have HUGE command any more, there is no point in adding 1 to the num of slots in the command queue. Doing so is buggy and might corrupt memory. Bug introduced by 4ce7cc2b09553a91d4aea014c39674685715173a iwlagn: support multiple TBs per command Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-08iwlagn: send tx power command if defer cause by RXON not matchWey-Yi Guy
During channge channel, tx power will not send to uCode, the tx power command should send after scan complete. but should also can send after RXON command. Stable fix identified by Stanislaw Gruszka <sgruszka@redhat.com>. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-06iwlagn: use cts-to-self protection on 5000 adapters seriesStanislaw Gruszka
This patch fixes 802.11n stability and performance regression we have since 2.6.35. It boost performance on my 5GHz N-only network from about 5MB/s to 8MB/s. Similar percentage boost can be observed on 2.4 GHz. These are test results of 5x downloading of approximately 700MB iso image: vanilla: 5.27 5.22 4.94 4.47 5.31 ; avr 5.0420 std 0.35110 patched: 8.07 7.95 8.06 7.99 7.96 ; avr 8.0060 std 0.055946 This was achieved with NetworkManager configured to do not perform periodical scans, by configuring constant BSSID. With periodical scans, after some time, performance downgrade to unpatched driver level, like in example below: patched: 7.40 7.61 4.28 4.37 4.80 avr 5.6920 std 1.6683 However patch still make better here, since similar test on unpatched driver make link disconnects with below messages after some time: wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticate with 00:23:69:35:d1:3f (try 3) wlan1: authentication with 00:23:69:35:d1:3f timed out On 2.6.35 kernel patch helps against connection hangs with messages: iwlagn 0000:20:00.0: queue 10 stuck 3 time. Fw reload. iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03iwlagn: fix channel switch lockingStanislaw Gruszka
We use priv->mutex to avoid race conditions between iwl_chswitch_done() and iwlagn_mac_channel_switch(), when marking channel switch in progress. But iwl_chswitch_done() can be called in atomic context from iwl_rx_csa() or with mutex already taken from iwlagn_commit_rxon(). These bugs were introduced by: commit 79d07325502e73508f917475bc1617b60979dd94 Author: Wey-Yi Guy <wey-yi.w.guy@intel.com> Date: Thu May 6 08:54:11 2010 -0700 iwlwifi: support channel switch offload in driver To fix remove mutex from iwl_chswitch_done() and use atomic bitops for marking channel switch pending. Also remove iwl2030_hw_channel_switch() since 2000 series adapters are 2.4GHz only devices. Cc: stable@kernel.org # 2.6.36+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-31iwlagn: fix incorrect PCI subsystem id for 6150 devicesWey-Yi Guy
For 6150 devices, modify the supported PCI subsystem ID. Cc: stable@kernel.org Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-25Merge branch 'for-davem' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-05-24Merge ↵John W. Linville
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-05-24iwlagn: dbg_fixed_rate only used when CONFIG_MAC80211_DEBUGFS enabledWey-Yi Guy
Fix compiling error when CONFIG_MAC80211_DEBUGFS is not enabled drivers/net/wireless/iwlwifi/iwl-agn-rs.c:351: error: 'struct iwl_lq_sta' has no member named 'dbg_fixed_rate' drivers/net/wireless/iwlwifi/iwl-agn-rs.c:1076: error: 'struct iwl_lq_sta' has no member named 'dbg_fixed_rate' Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
2011-05-19iwlwifi: remove unused parameter from iwl_hcmd_queue_reclaimDaniel Halperin
cmd_index is never used. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-16Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2011-05-16iwlwifi: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warningStephen Boyd
Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following warning: In file included from arch/x86/include/asm/uaccess.h:573, from include/net/checksum.h:25, from include/linux/skbuff.h:28, from drivers/net/wireless/iwlwifi/iwl-agn-rs.c:28: In function 'copy_from_user', inlined from 'rs_sta_dbgfs_scale_table_write' at drivers/net/wireless/iwlwifi/iwl-agn-rs.c:3099: arch/x86/include/asm/uaccess_64.h:65: warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct presumably due to buf_size being signed causing GCC to fail to see that buf_size can't become negative. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13iwlagn: remove unused old_assoc parameterWey-Yi Guy
old_assoc not used, remove it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: change default beacon intervalJohannes Berg
When the PAN context is active, but unused, it may still block scans that take more dwell time than its beacon interval (which is odd). Work around this problem by using a default beacon interval of 200 so scans will fit between. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: remove set but unused varsJohannes Berg
gcc is warning that a few variables in rate scaling are set but never otherwise used. This pointed out a few simplifications. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: alwasy send RXON with disassociate falge before associateWey-Yi Guy
Before send the RXON command with associated flag set, always do disassociate first to make sure uCode is in the correct state. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: clear STATUS_HCMD_ACTIVE bit if fail enqueueWey-Yi Guy
If fail to enqueue host command, clear the STATUS_hcmD_ACTIVE bit Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: add testmode set fixed rate commandWey-Yi Guy
Add support in testmode for setting fixed rate Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: add eeprom command to testmodeWey-Yi Guy
Add the capability to dump eeprom through testmode request Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: add testmode trace commandWey-Yi Guy
Adding testmode trace/debug capability Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: more ucode error log infoWey-Yi Guy
No functional changes, just logging more information when uCode crash, also change change the format. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: support multiple TBs per commandJohannes Berg
The current "huge" command handling is a bit confusing, and very limited since only one command may be huge at a time. Additionally, we often copy data around quite pointlessly since we could instead map the existing scan buffer for example and use it directly. This patch makes that possible. The first change is that multiple buffers may be given to each command (this change was prepared earlier so callsites don't need to change). Each of those can be mapped attached to a TB in the TFD, and the command header can use a TB (the first one) in the TFD as well. Doing this allows getting rid of huge commands in favour of mapping existing buffers. The beacon transmission is also optimised to not copy the SKB at all but use multiple TBs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: remove unused pad argumentJohannes Berg
The pad argument to iwlagn_txq_free_tfd isn't used, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: clean up TXQ indirectionJohannes Berg
All of these functions no longer need to be accessed indirectly since they're shared in all AGN devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: prepare for multi-TB commandsJohannes Berg
In a subsequent patch, I want to make commands use multiple TBs in a TFD. This is a simple change to prepare the data structures for this, with as of now still just a single TB supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-10iwlagn: fix iwl_is_any_associatedJohannes Berg
The function iwl_is_any_associated() was intended to check both contexts, but due to an oversight it only checks the BSS context. This leads to a problem with scanning since the passive dwell time isn't restricted appropriately and a scan that includes passive channels will never finish if only the PAN context is associated since the default dwell time of 120ms won't fit into the normal 100 TU DTIM interval. Fix the function by using for_each_context() and also reorganise the other functions a bit to take advantage of each other making the code easier to read. Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10iwlagn: led stay solid on when no trafficWey-Yi Guy
commit 5ed540aecc2aae92d5c97b9a9306a5bf88ad5574 change the led behavior for iwlwifi driver; the side effect cause led blink all the time. Modify the led blink table to fix this problem Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-06iwlagn: check DMA mapping errorsJohannes Berg
DMA mappings can fail, but the current code doesn't check for that. Add checking, which requires some restructuring for proper error paths. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06iwlagn: remove bytecount indirectionJohannes Berg
All AGN devices need the bytecount table, so remove the indirection and make the functions static again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06iwlagn: dont update bytecount table for command queueJohannes Berg
The device doesn't use the bytecount table for the command queue, only for aggregation queues to make aggregation decisions. So don't update it for the command queue (and we even updated it with wrong values). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06iwlagn: remove unused variableJohannes Berg
The variable 'len' here is set but never used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06iwlagn: remove frame pre-allocationJohannes Berg
The frame pre-allocation is quite a bit of complex code, all to avoid a single allocation. Remove it and consolidate the beacon sending code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-04 16:56:57 +0000