summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/zd1211rw/zd_ieee80211.c
AgeCommit message (Collapse)Author
2008-09-15zd1211rw: make use of new regulatory_hint()Luis R. Rodriguez
This cleans up zd1211rw's own regulatory work, and makes use of the new cfg80211 regulatory_hint(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29cfg80211 API for channels/bitrates, mac80211 and driver conversionJohannes Berg
This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28zd1211rw: add copyright noticesDaniel Drake
Requested by Michael Wu. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28zd1211rw: port to mac80211Daniel Drake
This seems to be working smoothly now. Let's not hold back the mac80211 transition any further. This patch ports the existing driver from softmac to mac80211. Many thanks to everyone who helped out with the porting efforts. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Allow channels 1-13 in JapanDaniel Drake
Eric Goff found that he could not use his ZD1211 device which is programmed for the Japan regulatory domain. It turns out that ZyDAS deviate from the spec here: they do not use the newer Japan region code (0x41) but their drivers do operate as if the newer Japan legal frequency range is in effect. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Remove IW_FREQ_AUTO supportDaniel Drake
http://bugzilla.kernel.org/show_bug.cgi?id=7399 zd1211rw's support for IW_FREQ_AUTO is broken: when specified, the driver tries to change to a channel specified in an uninitialized integer. As IW_FREQ_AUTO is hard to implement properly, the solution (at least for now) is to drop support for it and start ignoring the flags like all other wireless drivers do. This has the added advantage that kismet also starts working with zd1211rw, even though kismet requesting IW_FREQ_AUTO is also a bug (fixed in their svn) Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] ZyDAS ZD1211 USB-WLAN driverDaniel Drake
There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>