summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2018-12-13mac80211_hwsim: Timer should be initialized before device registeredVasyl Vavrychuk
commit a1881c9b8a1edef0a5ae1d5c1b61406fe3402114 upstream. Otherwise if network manager starts configuring Wi-Fi interface immidiatelly after getting notification of its creation, we will get NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff95ae94c8>] hrtimer_active+0x28/0x50 ... Call Trace: [<ffffffff95ae9997>] ? hrtimer_try_to_cancel+0x27/0x110 [<ffffffff95ae9a95>] ? hrtimer_cancel+0x15/0x20 [<ffffffffc0803bf0>] ? mac80211_hwsim_config+0x140/0x1c0 [mac80211_hwsim] Cc: stable@vger.kernel.org Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@globallogic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13Revert "wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()"Sasha Levin
This reverts commit 3fdd34643ffc378b5924941fad40352c04610294 which was upstream commit 4ec7cece87b3ed21ffcd407c62fb2f151a366bc1. From Dietmar May's report on the stable mailing list (https://www.spinics.net/lists/stable/msg272201.html): > I've run into some problems which appear due to (a) recent patch(es) on > the wlcore wifi driver. > > 4.4.160 - commit 3fdd34643ffc378b5924941fad40352c04610294 > 4.9.131 - commit afeeecc764436f31d4447575bb9007732333818c > > Earlier versions (4.9.130 and 4.4.159 - tested back to 4.4.49) do not > exhibit this problem. It is still present in 4.9.141. > > master as of 4.20.0-rc4 does not exhibit this problem. > > Basically, during client association when in AP mode (running hostapd), > handshake may or may not complete following a noticeable delay. If > successful, then the driver fails consistently in warn_slowpath_null > during disassociation. If unsuccessful, the wifi client attempts multiple > times, sometimes failing repeatedly. I've had clients unable to connect > for 3-5 minutes during testing, with the syslog filled with dozens of > backtraces. syslog details are below. > > I'm working on an embedded device with a TI 3352 ARM processor and a > murata wl1271 module in sdio mode. We're running a fully patched ubuntu > 18.04 ARM build, with a kernel built from kernel.org's stable/linux repo <https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-4.9.y&id=afeeecc764436f31d4447575bb9007732333818c>. > Relevant parts of the kernel config are included below. > > The commit message states: > > > /I've only seen this few times with the runtime PM patches enabled so > > this one is probably not needed before that. This seems to work > > currently based on the current PM implementation timer. Let's apply > > this separately though in case others are hitting this issue./ > We're not doing anything explicit with power management. The device is an > IoT edge gateway with battery backup, normally running on wall power. The > battery is currently used solely to shut down the system cleanly to avoid > filesystem corruption. > > The device tree is configured to keep power in suspend; but the device > should never suspend, so in our case, there is no need to call > wl1271_ps_elp_wakeup() or wl1271_ps_elp_sleep(), as occurs in the patch. Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01iwlwifi: mvm: fix regulatory domain update when the firmware startsEmmanuel Grumbach
commit 82715ac71e6b94a2c2136e31f3a8e6748e33aa8c upstream. When the firmware starts, it doesn't have any regulatory information, hence it uses the world wide limitations. The driver can feed the firmware with previous knowledge that was kept in the driver, but the firmware may still not update its internal tables. This happens when we start a BSS interface, and then the firmware can change the regulatory tables based on our location and it'll use more lenient, location specific rules. Then, if the firmware is shut down (when the interface is brought down), and then an AP interface is created, the firmware will forget the country specific rules. The host will think that we are in a certain country that may allow channels and will try to teach the firmware about our location, but the firmware may still not allow to drop the world wide limitations and apply country specific rules because it was just re-started. In this case, the firmware will reply with MCC_RESP_ILLEGAL to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let the upper layers (cfg80211 / hostapd) know that the channel list they know about has been updated. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105 Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01mwifiex: fix p2p device doesn't find in scan problemKarthik D A
commit 3d8bd85c2c9e47ed2c82348aa5b6029ed48376ae upstream. Marvell p2p device disappears from the list of p2p peers on the other p2p device after disconnection. It happens due to a bug in driver. When interface is changed from p2p to station, certain variables(bss_type, bss_role etc.) aren't correctly updated. This patch corrects them to fix the issue. Signed-off-by: Karthik D A <karthida@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [AmitP: Refactored to fix driver file path in linux-4.4.y] Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01mwifiex: Fix NULL pointer dereference in skb_dequeue()Amitkumar Karwar
commit c44c040300d7afd79294710313a4989683e2afb1 upstream. At couple of places in cleanup path, we are just going through the skb queue and freeing them without unlinking. This leads to a crash when other thread tries to do skb_dequeue() and use already freed node. The problem is freed by unlinking skb before freeing it. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [AmitP: Refactored to fix driver file path in linux-4.4.y] Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01cw1200: Don't leak memory if krealloc failesJohannes Thumshirn
commit 9afdd6128c39f42398041bb2e017d8df0dcebcd1 upstream. The call to krealloc() in wsm_buf_reserve() directly assigns the newly returned memory to buf->begin. This is all fine except when krealloc() failes we loose the ability to free the old memory pointed to by buf->begin. If we just create a temporary variable to assign memory to and assign the memory to it we can mitigate the memory leak. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01ath10k: fix kernel panic due to race in accessing arvif listVasanthakumar Thiagarajan
commit ebaa4b1620bf69f2bc43cb45ea85fbafdaec23c3 upstream. arvifs list is traversed within data_lock spin_lock in tasklet context to fill channel information from the corresponding vif. This means any access to arvifs list for add/del operations should also be protected with the same spin_lock to avoid the race. Fix this by performing list add/del on arvfis within the data_lock. This could fix kernel panic something like the below. LR is at ath10k_htt_rx_pktlog_completion_handler+0x100/0xb6c [ath10k_core] PC is at ath10k_htt_rx_pktlog_completion_handler+0x1c0/0xb6c [ath10k_core] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [<bf4857f4>] (ath10k_htt_rx_pktlog_completion_handler+0x2f4/0xb6c [ath10k_core]) [<bf487540>] (ath10k_htt_txrx_compl_task+0x8b4/0x1188 [ath10k_core]) [<c00312d4>] (tasklet_action+0x8c/0xec) [<c00309a8>] (__do_softirq+0xdc/0x208) [<c0030d6c>] (irq_exit+0x84/0xe0) [<c005db04>] (__handle_domain_irq+0x80/0xa0) [<c00085c4>] (gic_handle_irq+0x38/0x5c) [<c0009640>] (__irq_svc+0x40/0x74) (gdb) list *(ath10k_htt_rx_pktlog_completion_handler+0x1c0) 0x136c0 is in ath10k_htt_rx_h_channel (drivers/net/wireless/ath/ath10k/htt_rx.c:769) 764 struct cfg80211_chan_def def; 765 766 lockdep_assert_held(&ar->data_lock); 767 768 list_for_each_entry(arvif, &ar->arvifs, list) { 769 if (arvif->vdev_id == vdev_id && 770 ath10k_mac_vif_chan(arvif->vif, &def) == 0) 771 return def.chan; 772 } 773 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01iwlwifi: mvm: support sta_statistics() even on older firmwareEmmanuel Grumbach
commit ec484d03ef0df8d34086b95710e355a259cbe1f2 upstream. The oldest firmware supported by iwlmvm do support getting the average beacon RSSI. Enable the sta_statistics() call from mac80211 even on older firmware versions. Fixes: 33cef9256342 ("iwlwifi: mvm: support beacon statistics for BSS client") Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21ath10k: schedule hardware restart if WMI command times outMartin Willi
[ Upstream commit a9911937e7d332761e8c4fcbc7ba0426bdc3956f ] When running in AP mode, ath10k sometimes suffers from TX credit starvation. The issue is hard to reproduce and shows up once in a few days, but has been repeatedly seen with QCA9882 and a large range of firmwares, including 10.2.4.70.67. Once the module is in this state, TX credits are never replenished, which results in "SWBA overrun" errors, as no beacons can be sent. Even worse, WMI commands run in a timeout while holding the conf mutex for three seconds each, making any further operations slow and the whole system unresponsive. The firmware/driver never recovers from that state automatically, and triggering TX flush or warm restarts won't work over WMI. So issue a hardware restart if a WMI command times out due to missing TX credits. This implies a connectivity outage of about 1.4s in AP mode, but brings back the interface and the whole system to a usable state. WMI command timeouts have not been seen in absent of this specific issue, so taking such drastic actions seems legitimate. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-10brcmfmac: Fix glom_skb leak in brcmf_sdiod_recv_chainPeter S. Housel
[ Upstream commit 5ea59db8a375216e6c915c5586f556766673b5a7 ] An earlier change to this function (3bdae810721b) fixed a leak in the case of an unsuccessful call to brcmf_sdiod_buffrw(). However, the glom_skb buffer, used for emulating a scattering read, is never used or referenced after its contents are copied into the destination buffers, and therefore always needs to be freed by the end of the function. Fixes: 3bdae810721b ("brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain") Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support") Cc: stable@vger.kernel.org # 4.9.x- Signed-off-by: Peter S. Housel <housel@acm.org> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10mac80211_hwsim: do not omit multicast announce of first added radioMartin Willi
[ Upstream commit 28ef8b49a338dc1844e86b7954cfffc7dfa2660a ] The allocation of hwsim radio identifiers uses a post-increment from 0, so the first radio has idx 0. This idx is explicitly excluded from multicast announcements ever since, but it is unclear why. Drop that idx check and announce the first radio as well. This makes userspace happy if it relies on these events. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-13ath10k: fix scan crash due to incorrect length calculationZhi Chen
commit c8291988806407e02a01b4b15b4504eafbcc04e0 upstream. Length of WMI scan message was not calculated correctly. The allocated buffer was smaller than what we expected. So WMI message corrupted skb_info, which is at the end of skb->data. This fix takes TLV header into account even if the element is zero-length. Crash log: [49.629986] Unhandled kernel unaligned access[#1]: [49.634932] CPU: 0 PID: 1176 Comm: logd Not tainted 4.4.60 #180 [49.641040] task: 83051460 ti: 8329c000 task.ti: 8329c000 [49.646608] $ 0 : 00000000 00000001 80984a80 00000000 [49.652038] $ 4 : 45259e89 8046d484 8046df30 8024ba70 [49.657468] $ 8 : 00000000 804cc4c0 00000001 20306320 [49.662898] $12 : 33322037 000110f2 00000000 31203930 [49.668327] $16 : 82792b40 80984a80 00000001 804207fc [49.673757] $20 : 00000000 0000012c 00000040 80470000 [49.679186] $24 : 00000000 8024af7c [49.684617] $28 : 8329c000 8329db88 00000001 802c58d0 [49.690046] Hi : 00000000 [49.693022] Lo : 453c0000 [49.696013] epc : 800efae4 put_page+0x0/0x58 [49.700615] ra : 802c58d0 skb_release_data+0x148/0x1d4 [49.706184] Status: 1000fc03 KERNEL EXL IE [49.710531] Cause : 00800010 (ExcCode 04) [49.714669] BadVA : 45259e89 [49.717644] PrId : 00019374 (MIPS 24Kc) Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ath10k: fix use-after-free in ath10k_wmi_cmd_send_nowaitCarl Huang
commit 9ef0f58ed7b4a55da4a64641d538e0d9e46579ac upstream. The skb may be freed in tx completion context before trace_ath10k_wmi_cmd is called. This can be easily captured when KASAN(Kernel Address Sanitizer) is enabled. The fix is to move trace_ath10k_wmi_cmd before the send operation. As the ret has no meaning in trace_ath10k_wmi_cmd then, so remove this parameter too. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Tested-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10mac80211_hwsim: correct use of IEEE80211_VHT_CAP_RXSTBC_XDanek Duvall
[ Upstream commit d7c863a2f65e48f442379f4ee1846d52e0c5d24d ] The mac80211_hwsim driver intends to say that it supports up to four STBC receive streams, but instead it ends up saying something undefined. The IEEE80211_VHT_CAP_RXSTBC_X macros aren't independent bits that can be ORed together, but values. In this case, _4 is the appropriate one to use. Signed-off-by: Danek Duvall <duvall@comfychair.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()Tony Lindgren
[ Upstream commit 4ec7cece87b3ed21ffcd407c62fb2f151a366bc1 ] Otherwise we can get: WARNING: CPU: 0 PID: 55 at drivers/net/wireless/ti/wlcore/io.h:84 I've only seen this few times with the runtime PM patches enabled so this one is probably not needed before that. This seems to work currently based on the current PM implementation timer. Let's apply this separately though in case others are hitting this issue. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10rndis_wlan: potential buffer overflow in rndis_wlan_auth_indication()Dan Carpenter
[ Upstream commit ae636fb1554833ee5133ca47bf4b2791b6739c52 ] This is a static checker fix, not something I have tested. The issue is that on the second iteration through the loop, we jump forward by le32_to_cpu(auth_req->length) bytes. The problem is that if the length is more than "buflen" then we end up with a negative "buflen". A negative buflen is type promoted to a high positive value and the loop continues but it's accessing beyond the end of the buffer. I believe the "auth_req->length" comes from the firmware and if the firmware is malicious or buggy, you're already toasted so the impact of this bug is probably not very severe. Fixes: 030645aceb3d ("rndis_wlan: handle 802.11 indications from device") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10ath10k: protect ath10k_htt_rx_ring_free with rx_ring.lockBen Greear
[ Upstream commit 168f75f11fe68455e0d058a818ebccfc329d8685 ] While debugging driver crashes related to a buggy firmware crashing under load, I noticed that ath10k_htt_rx_ring_free could be called without being under lock. I'm not sure if this is the root cause of the crash or not, but it seems prudent to protect it. Originally tested on 4.16+ kernel with ath10k-ct 10.4 firmware running on 9984 NIC. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19ath10k: disable bundle mgmt tx completion event supportSurabhi Vishnoi
[ Upstream commit 673bc519c55843c68c3aecff71a4101e79d28d2b ] The tx completion of multiple mgmt frames can be bundled in a single event and sent by the firmware to host, if this capability is not disabled explicitly by the host. If the host cannot handle the bundled mgmt tx completion, this capability support needs to be disabled in the wmi init cmd, sent to the firmware. Add the host capability indication flag in the wmi ready command, to let firmware know the features supported by the host driver. This field is ignored if it is not supported by firmware. Set the host capability indication flag(i.e. host_capab) to zero, for disabling the support of bundle mgmt tx completion. This will indicate the firmware to send completion event for every mgmt tx completion, instead of bundling them together and sending in a single event. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19ath10k: prevent active scans on potential unusable channelsSven Eckelmann
[ Upstream commit 3f259111583801013cb605bb4414aa529adccf1c ] The QCA4019 hw1.0 firmware 10.4-3.2.1-00050 and 10.4-3.5.3-00053 (and most likely all other) seem to ignore the WMI_CHAN_FLAG_DFS flag during the scan. This results in transmission (probe requests) on channels which are not "available" for transmissions. Since the firmware is closed source and nothing can be done from our side to fix the problem in it, the driver has to work around this problem. The WMI_CHAN_FLAG_PASSIVE seems to be interpreted by the firmware to not scan actively on a channel unless an AP was detected on it. Simple probe requests will then be transmitted by the STA on the channel. ath10k must therefore also use this flag when it queues a radar channel for scanning. This should reduce the chance of an active scan when the channel might be "unusable" for transmissions. Fixes: e8a50f8ba44b ("ath10k: introduce DFS implementation") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24brcmfmac: stop watchdog before detach and free everythingMichael Trimarchi
[ Upstream commit 373c83a801f15b1e3d02d855fad89112bd4ccbe0 ] Using built-in in kernel image without a firmware in filesystem or in the kernel image can lead to a kernel NULL pointer deference. Watchdog need to be stopped in brcmf_sdio_remove The system is going down NOW! [ 1348.110759] Unable to handle kernel NULL pointer dereference at virtual address 000002f8 Sent SIGTERM to all processes [ 1348.121412] Mem abort info: [ 1348.126962] ESR = 0x96000004 [ 1348.130023] Exception class = DABT (current EL), IL = 32 bits [ 1348.135948] SET = 0, FnV = 0 [ 1348.138997] EA = 0, S1PTW = 0 [ 1348.142154] Data abort info: [ 1348.145045] ISV = 0, ISS = 0x00000004 [ 1348.148884] CM = 0, WnR = 0 [ 1348.151861] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 1348.158475] [00000000000002f8] pgd=0000000000000000 [ 1348.163364] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1348.168927] Modules linked in: ipv6 [ 1348.172421] CPU: 3 PID: 1421 Comm: brcmf_wdog/mmc0 Not tainted 4.17.0-rc5-next-20180517 #18 [ 1348.180757] Hardware name: Amarula A64-Relic (DT) [ 1348.185455] pstate: 60000005 (nZCv daif -PAN -UAO) [ 1348.190251] pc : brcmf_sdiod_freezer_count+0x0/0x20 [ 1348.195124] lr : brcmf_sdio_watchdog_thread+0x64/0x290 [ 1348.200253] sp : ffff00000b85be30 [ 1348.203561] x29: ffff00000b85be30 x28: 0000000000000000 [ 1348.208868] x27: ffff00000b6cb918 x26: ffff80003b990638 [ 1348.214176] x25: ffff0000087b1a20 x24: ffff80003b94f800 [ 1348.219483] x23: ffff000008e620c8 x22: ffff000008f0b660 [ 1348.224790] x21: ffff000008c6a858 x20: 00000000fffffe00 [ 1348.230097] x19: ffff80003b94f800 x18: 0000000000000001 [ 1348.235404] x17: 0000ffffab2e8a74 x16: ffff0000080d7de8 [ 1348.240711] x15: 0000000000000000 x14: 0000000000000400 [ 1348.246018] x13: 0000000000000400 x12: 0000000000000001 [ 1348.251324] x11: 00000000000002c4 x10: 0000000000000a10 [ 1348.256631] x9 : ffff00000b85bc40 x8 : ffff80003be11870 [ 1348.261937] x7 : ffff80003dfc7308 x6 : 000000078ff08b55 [ 1348.267243] x5 : 00000139e1058400 x4 : 0000000000000000 [ 1348.272550] x3 : dead000000000100 x2 : 958f2788d6618100 [ 1348.277856] x1 : 00000000fffffe00 x0 : 0000000000000000 Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06rsi: Fix 'invalid vdd' warning in mmcSiva Rebbagondla
[ Upstream commit 78e450719c702784e42af6da912d3692fd3da0cb ] While performing cleanup, driver is messing with card->ocr value by not masking rocr against ocr_avail. Below panic is observed with some of the SDIO host controllers due to this. Issue is resolved by reverting incorrect modifications to vdd. [ 927.423821] mmc1: Invalid vdd 0x1f [ 927.423925] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic [ 927.424073] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000-caracalla #1 [ 927.424075] Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.06 01/22/2018 [ 927.424082] RIP: 0010:sdhci_set_power_noreg+0xdd/0x190[sdhci] [ 927.424085] RSP: 0018:ffffac3fc064b930 EFLAGS: 00010282 [ 927.424107] Call Trace: [ 927.424118] sdhci_set_power+0x5a/0x60 [sdhci] [ 927.424125] sdhci_set_ios+0x360/0x3b0 [sdhci] [ 927.424133] mmc_set_initial_state+0x92/0x120 [ 927.424137] mmc_power_up.part.34+0x33/0x1d0 [ 927.424141] mmc_power_up+0x17/0x20 [ 927.424147] mmc_sdio_runtime_resume+0x2d/0x50 [ 927.424151] mmc_runtime_resume+0x17/0x20 [ 927.424156] __rpm_callback+0xc4/0x200 [ 927.424161] ? idr_alloc_cyclic+0x57/0xd0 [ 927.424165] ? mmc_runtime_suspend+0x20/0x20 [ 927.424169] rpm_callback+0x24/0x80 [ 927.424172] ? mmc_runtime_suspend+0x20/0x20 [ 927.424176] rpm_resume+0x4b3/0x6c0 [ 927.424181] __pm_runtime_resume+0x4e/0x80 [ 927.424188] driver_probe_device+0x41/0x490 [ 927.424192] __driver_attach+0xdf/0xf0 [ 927.424196] ? driver_probe_device+0x490/0x490 [ 927.424201] bus_for_each_dev+0x6c/0xc0 [ 927.424205] driver_attach+0x1e/0x20 [ 927.424209] bus_add_driver+0x1f4/0x270 [ 927.424217] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424221] driver_register+0x60/0xe0 [ 927.424227] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424231] sdio_register_driver+0x20/0x30 [ 927.424237] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06brcmfmac: Add support for bcm43364 wireless chipsetSean Lanigan
[ Upstream commit 9c4a121e82634aa000a702c98cd6f05b27d6e186 ] Add support for the BCM43364 chipset via an SDIO interface, as used in e.g. the Murata 1FX module. The BCM43364 uses the same firmware as the BCM43430 (which is already included), the only difference is the omission of Bluetooth. However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place triggers the brcmfmac driver to load, and then correctly use the firmware file 'brcmfmac43430-sdio.bin'. Signed-off-by: Sean Lanigan <sean@lano.id.au> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06mwifiex: correct histogram data with appropriate indexXinming Hu
[ Upstream commit 30bfce0b63fa68c14ae1613eb9d259fa18644074 ] Correct snr/nr/rssi data index to avoid possible buffer underflow. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06ath: Add regulatory mapping for BahamasSven Eckelmann
[ Upstream commit 699e2302c286a14afe7b7394151ce6c4e1790cc1 ] The country code is used by the ath to detect the ISO 3166-1 alpha-2 name and to select the correct conformance test limits (CTL) for a country. If the country isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this country are: * 2.4GHz: ETSI * 5GHz: FCC Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06ath: Add regulatory mapping for BermudaSven Eckelmann
[ Upstream commit 9c790f2d234f65697e3b0948adbfdf36dbe63dd7 ] The country code is used by the ath to detect the ISO 3166-1 alpha-2 name and to select the correct conformance test limits (CTL) for a country. If the country isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this country are: * 2.4GHz: FCC * 5GHz: FCC Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06ath: Add regulatory mapping for SerbiaSven Eckelmann
[ Upstream commit 2a3169a54bb53717928392a04fb84deb765b51f1 ] The country code is used by the ath to detect the ISO 3166-1 alpha-2 name and to select the correct conformance test limits (CTL) for a country. If the country isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this country are: * 2.4GHz: ETSI * 5GHz: ETSI Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06ath: Add regulatory mapping for TanzaniaSven Eckelmann
[ Upstream commit 667ddac5745fb9fddfe8f7fd2523070f50bd4442 ] The country code is used by the ath to detect the ISO 3166-1 alpha-2 name and to select the correct conformance test limits (CTL) for a country. If the country isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this country are: * 2.4GHz: ETSI * 5GHz: FCC Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06ath: Add regulatory mapping for UgandaSven Eckelmann
[ Upstream commit 1ea3986ad2bc72081c69f3fbc1e5e0eeb3c44f17 ] The country code is used by the ath to detect the ISO 3166-1 alpha-2 name and to select the correct conformance test limits (CTL) for a country. If the country isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this country are: * 2.4GHz: ETSI * 5GHz: FCC Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06ath: Add regulatory mapping for APL2_FCCASven Eckelmann
[ Upstream commit 4f183687e3fad3ce0e06e38976cad81bc4541990 ] The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: FCC * 5GHz: FCC Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06ath: Add regulatory mapping for APL13_WORLDSven Eckelmann
[ Upstream commit 9ba8df0c52b3e6baa436374b429d3d73bd09a320 ] The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: ETSI Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06ath: Add regulatory mapping for ETSI8_WORLDSven Eckelmann
[ Upstream commit 45faf6e096da8bb80e1ddf8c08a26a9601d9469e ] The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: ETSI Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06ath: Add regulatory mapping for FCC3_ETSICSven Eckelmann
[ Upstream commit 01fb2994a98dc72c8818c274f7b5983d5dd885c7 ] The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: FCC Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06wlcore: sdio: check for valid platform device data before suspendEyal Reizer
[ Upstream commit 6e91d48371e79862ea2c05867aaebe4afe55a865 ] the wl pointer can be null In case only wlcore_sdio is probed while no WiLink module is successfully probed, as in the case of mounting a wl12xx module while using a device tree file configured with wl18xx related settings. In this case the system was crashing in wl1271_suspend() as platform device data is not set. Make sure wl the pointer is valid before using it. Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06mwifiex: handle race during mwifiex_usb_disconnectGanapathi Bhat
[ Upstream commit b817047ae70c0bd67b677b65d0d69d72cd6e9728 ] Race condition is observed during rmmod of mwifiex_usb: 1. The rmmod thread will call mwifiex_usb_disconnect(), download SHUTDOWN command and do wait_event_interruptible_timeout(), waiting for response. 2. The main thread will handle the response and will do a wake_up_interruptible(), unblocking rmmod thread. 3. On getting unblocked, rmmod thread will make rx_cmd.urb = NULL in mwifiex_usb_free(). 4. The main thread will try to resubmit rx_cmd.urb in mwifiex_usb_submit_rx_urb(), which is NULL. To fix, wait for main thread to complete before calling mwifiex_usb_free(). Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06iwlwifi: pcie: fix race in Rx buffer allocatorShaul Triebitz
[ Upstream commit 0f22e40053bd5378ad1e3250e65c574fd61c0cd6 ] Make sure the rx_allocator worker is canceled before running the rx_init routine. rx_init frees and re-allocates all rxb's pages. The rx_allocator worker also allocates pages for the used rxb's. Running rx_init and rx_allocator simultaniously causes a kernel panic. Fix that by canceling the work in rx_init. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22rtlwifi: rtl8821ae: fix firmware is not ready to runPing-Ke Shih
commit 9a98302de19991d51e067b88750585203b2a3ab6 upstream. Without this patch, firmware will not run properly on rtl8821ae, and it causes bad user experience. For example, bad connection performance with low rate, higher power consumption, and so on. rtl8821ae uses two kinds of firmwares for normal and WoWlan cases, and each firmware has firmware data buffer and size individually. Original code always overwrite size of normal firmware rtlpriv->rtlhal.fwsize, and this mismatch causes firmware checksum error, then firmware can't start. In this situation, driver gives message "Firmware is not ready to run!". Fixes: fe89707f0afa ("rtlwifi: rtl8821ae: Simplify loading of WOWLAN firmware") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Cc: Stable <stable@vger.kernel.org> # 4.0+ Reviewed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-11ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap modeVasanthakumar Thiagarajan
commit 2f38c3c01de945234d23dd163e3528ccb413066d upstream. Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future) rx_hdr_status is not padded to align in 4-byte boundary. Define a new hw_params field to handle different alignment behaviour between different hw. This patch fixes improper retrieval of rfc1042 header with QCA4019. This patch along with "ath10k: Properly remove padding from the start of rx payload" will fix traffic failure in ethernet decap mode for QCA4019. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> [bwh: This just adds the part that was left out of the previous backport, commit b88fb9ea475a.] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13brcmfmac: Fix check for ISO3166 codeStefan Wahren
commit 9b9322db5c5a1917a66c71fe47c3848a9a31227e upstream. The commit "regulatory: add NUL to request alpha2" increases the length of alpha2 to 3. This causes a regression on brcmfmac, because brcmf_cfg80211_reg_notifier() expect valid ISO3166 codes in the complete array. So fix this accordingly. Fixes: 657308f73e67 ("regulatory: add NUL to request alpha2") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 4.4: adjust filename] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06rtlwifi: rtl8192cu: Remove variable self-assignment in rf.cMatthias Kaehlcke
commit fb239c1209bb0f0b4830cc72507cc2f2d63fadbd upstream. In _rtl92c_get_txpower_writeval_by_regulatory() the variable writeVal is assigned to itself in an if ... else statement, apparently only to document that the branch condition is handled and that a previously read value should be returned unmodified. The self-assignment causes clang to raise the following warning: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c:304:13: error: explicitly assigning value of variable of type 'u32' (aka 'unsigned int') to itself [-Werror,-Wself-assign] writeVal = writeVal; Delete the branch with the self-assignment. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)Karthikeyan Periyasamy
[ Upstream commit 8b2d93dd22615cb7f3046a5a2083a6f8bb8052ed ] When attempt to run worker (ath10k_sta_rc_update_wk) after the station object (ieee80211_sta) delete will trigger the kernel panic. This problem arise in AP + Mesh configuration, Where the current node AP VAP and neighbor node mesh VAP MAC address are same. When the current mesh node try to establish the mesh link with neighbor node, driver peer creation for the neighbor mesh node fails due to duplication MAC address. Already the AP VAP created with same MAC address. It is caused by the following scenario steps. Steps: 1. In above condition, ath10k driver sta_state callback (ath10k_sta_state) fails to do the state change for a station from IEEE80211_STA_NOTEXIST to IEEE80211_STA_NONE due to peer creation fails. Sta_state callback is called from ieee80211_add_station() to handle the new station (neighbor mesh node) request from the wpa_supplicant. 2. Concurrently ath10k receive the sta_rc_update callback notification from the mesh_neighbour_update() to handle the beacon frames of the above neighbor mesh node. since its atomic callback, ath10k driver queue the work (ath10k_sta_rc_update_wk) to handle rc update. 3. Due to driver sta_state callback fails (step 1), mac80211 free the station object. 4. When the worker (ath10k_sta_rc_update_wk) scheduled to run, it will access the station object which is already deleted. so it will trigger kernel panic. Added the peer exist check in sta_rc_update callback before queue the work. Kernel Panic log: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0204000 [00000000] *pgd=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM CPU: 1 PID: 1833 Comm: kworker/u4:2 Not tainted 3.14.77 #1 task: dcef0000 ti: d72b6000 task.ti: d72b6000 PC is at pwq_activate_delayed_work+0x10/0x40 LR is at pwq_activate_delayed_work+0xc/0x40 pc : [<c023f988>] lr : [<c023f984>] psr: 40000193 sp : d72b7f18 ip : 0000007a fp : d72b6000 r10: 00000000 r9 : dd404414 r8 : d8c31998 r7 : d72b6038 r6 : 00000004 r5 : d4907ec8 r4 : dcee1300 r3 : ffffffe0 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5787d Table: 595bc06a DAC: 00000015 ... Process kworker/u4:2 (pid: 1833, stack limit = 0xd72b6238) Stack: (0xd72b7f18 to 0xd72b8000) 7f00: 00000001 dcee1300 7f20: 00000001 c02410dc d8c31980 dd404400 dd404400 c0242790 d8c31980 00000089 7f40: 00000000 d93e1340 00000000 d8c31980 c0242568 00000000 00000000 00000000 7f60: 00000000 c02474dc 00000000 00000000 000000f8 d8c31980 00000000 00000000 7f80: d72b7f80 d72b7f80 00000000 00000000 d72b7f90 d72b7f90 d72b7fac d93e1340 7fa0: c0247404 00000000 00000000 c0208d20 00000000 00000000 00000000 00000000 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c023f988>] (pwq_activate_delayed_work) from [<c02410dc>] (pwq_dec_nr_in_flight+0x58/0xc4) [<c02410dc>] (pwq_dec_nr_in_flight) from [<c0242790>] (worker_thread+0x228/0x360) [<c0242790>] (worker_thread) from [<c02474dc>] (kthread+0xd8/0xec) [<c02474dc>] (kthread) from [<c0208d20>] (ret_from_fork+0x14/0x34) Code: e92d4038 e1a05000 ebffffbc[69210.619376] SMP: failed to stop secondary CPUs Rebooting in 3 seconds.. Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30mac80211_hwsim: fix possible memory leak in hwsim_new_radio_nl()weiyongjun (A)
[ Upstream commit 0ddcff49b672239dda94d70d0fcf50317a9f4b51 ] 'hwname' is malloced in hwsim_new_radio_nl() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: ff4dd73dd2b4 ("mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16ath10k: rebuild crypto header in rx data framesVasanthakumar Thiagarajan
commit 7eccb738fce57cbe53ed903ccf43f9ab257b15b3 upstream. Rx data frames notified through HTT_T2H_MSG_TYPE_RX_IND and HTT_T2H_MSG_TYPE_RX_FRAG_IND expect PN/TSC check to be done on host (mac80211) rather than firmware. Rebuild cipher header in every received data frames (that are notified through those HTT interfaces) from the rx_hdr_status tlv available in the rx descriptor of the first msdu. Skip setting RX_FLAG_IV_STRIPPED flag for the packets which requires mac80211 PN/TSC check support and set appropriate RX_FLAG for stripped crypto tail. Hw QCA988X, QCA9887, QCA99X0, QCA9984, QCA9888 and QCA4019 currently need the rebuilding of cipher header to perform PN/TSC check for replay attack. Please note that removing crypto tail for CCMP-256, GCMP and GCMP-256 ciphers in raw mode needs to be fixed. Since Rx with these ciphers in raw mode does not work in the current form even without this patch and removing crypto tail for these chipers needs clean up, raw mode related issues in CCMP-256, GCMP and GCMP-256 can be addressed in follow up patches. Tested-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap modeVasanthakumar Thiagarajan
commit 2f38c3c01de945234d23dd163e3528ccb413066d upstream. Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future) rx_hdr_status is not padded to align in 4-byte boundary. Define a new hw_params field to handle different alignment behaviour between different hw. This patch fixes improper retrieval of rfc1042 header with QCA4019. This patch along with "ath10k: Properly remove padding from the start of rx payload" will fix traffic failure in ethernet decap mode for QCA4019. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16mac80211: allow not sending MIC up from driver for HW cryptoSara Sharon
commit f980ebc058c2fa2a552e495db1de0b330082ab70 upstream. When HW crypto is used, there's no need for the CCMP/GCMP MIC to be available to mac80211, and the hardware might have removed it already after checking. The MIC is also useless to have when the frame is already decrypted, so allow indicating that it's not present. Since we are running out of bits in mac80211_rx_flags, make the flags field a u64. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Sriram R <srirrama@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-29Revert "ath10k: send (re)assoc peer command when NSS changed"Karthikeyan Periyasamy
commit 55cc11da69895a680940c1733caabc37be685f5e upstream. This reverts commit 55884c045d31a29cf69db8332d1064a1b61dd159. When Ath10k is in AP mode and an unassociated STA sends a VHT action frame (Operating Mode Notification for the NSS change) periodically to AP this causes ath10k to call ath10k_station_assoc() which sends WMI_PEER_ASSOC_CMDID during NSS update. Over the time (with a certain client it can happen within 15 mins when there are over 500 of these VHT action frames) continuous calls of WMI_PEER_ASSOC_CMDID cause firmware to assert due to resource exhaust. To my knowledge setting WMI_PEER_NSS peer param itself enough to handle NSS updates and no need to call ath10k_station_assoc(). So revert the original commit from 2014 as it's unclear why the change was really needed. Now the firmware assert doesn't happen anymore. Issue observed in QCA9984 platform with firmware version:10.4-3.5.3-00053. This Change tested in QCA9984 with firmware version: 10.4-3.5.3-00053 and QCA988x platform with firmware version: 10.2.4-1.0-00036. Firmware Assert log: ath10k_pci 0002:01:00.0: firmware crashed! (guid e61f1274-9acd-4c5b-bcca-e032ea6e723c) ath10k_pci 0002:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0002:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1 ath10k_pci 0002:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 4c56a386 ath10k_pci 0002:01:00.0: board_file api 2 bmi_id 0:4 crc32 c2271344 ath10k_pci 0002:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0002:01:00.0: firmware register dump: ath10k_pci 0002:01:00.0: [00]: 0x0000000A 0x000015B3 0x00981E5F 0x00975B31 ath10k_pci 0002:01:00.0: [04]: 0x00981E5F 0x00060530 0x00000011 0x00446C60 ath10k_pci 0002:01:00.0: [08]: 0x0042F1FC 0x00458080 0x00000017 0x00000000 ath10k_pci 0002:01:00.0: [12]: 0x00000009 0x00000000 0x00973ABC 0x00973AD2 ath10k_pci 0002:01:00.0: [16]: 0x00973AB0 0x00960E62 0x009606CA 0x00000000 ath10k_pci 0002:01:00.0: [20]: 0x40981E5F 0x004066DC 0x00400000 0x00981E34 ath10k_pci 0002:01:00.0: [24]: 0x80983B48 0x0040673C 0x000000C0 0xC0981E5F ath10k_pci 0002:01:00.0: [28]: 0x80993DEB 0x0040676C 0x00431AB8 0x0045D0C4 ath10k_pci 0002:01:00.0: [32]: 0x80993E5C 0x004067AC 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [36]: 0x80994AAB 0x004067DC 0x00000000 0x0045D0C4 ath10k_pci 0002:01:00.0: [40]: 0x809971A0 0x0040681C 0x004303C0 0x00441B00 ath10k_pci 0002:01:00.0: [44]: 0x80991904 0x0040688C 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [48]: 0x80963AD3 0x00406A7C 0x004303C0 0x009918FC ath10k_pci 0002:01:00.0: [52]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000 ath10k_pci 0002:01:00.0: [56]: 0x80960E51 0x00406ACC 0x00400000 0x00000000 ath10k_pci 0002:01:00.0: Copy Engine register dump: ath10k_pci 0002:01:00.0: index: addr: sr_wr_idx: sr_r_idx: dst_wr_idx: dst_r_idx: ath10k_pci 0002:01:00.0: [00]: 0x0004a000 15 15 3 3 ath10k_pci 0002:01:00.0: [01]: 0x0004a400 17 17 212 213 ath10k_pci 0002:01:00.0: [02]: 0x0004a800 21 21 20 21 ath10k_pci 0002:01:00.0: [03]: 0x0004ac00 25 25 27 25 ath10k_pci 0002:01:00.0: [04]: 0x0004b000 515 515 144 104 ath10k_pci 0002:01:00.0: [05]: 0x0004b400 28 28 155 156 ath10k_pci 0002:01:00.0: [06]: 0x0004b800 12 12 12 12 ath10k_pci 0002:01:00.0: [07]: 0x0004bc00 1 1 1 1 ath10k_pci 0002:01:00.0: [08]: 0x0004c000 0 0 127 0 ath10k_pci 0002:01:00.0: [09]: 0x0004c400 1 1 1 1 ath10k_pci 0002:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0002:01:00.0: [11]: 0x0004cc00 0 0 0 0 ath10k_pci 0002:01:00.0: CE[1] write_index 212 sw_index 213 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: CE[2] write_index 20 sw_index 21 hw_index 0 nentries_mask 0x0000007f ath10k_pci 0002:01:00.0: CE[5] write_index 155 sw_index 156 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: DMA addr: nbytes: meta data: byte swap: gather: ath10k_pci 0002:01:00.0: [455]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [456]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [457]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [458]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [459]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [460]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [461]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [462]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [463]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [464]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [465]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [466]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [467]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [468]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [469]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [470]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [471]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [472]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [473]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [474]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [475]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [476]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [477]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [478]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [479]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [480]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [481]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [482]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [483]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [484]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [485]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [486]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [487]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [488]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [489]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [490]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [491]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [492]: 0x58174040 0 1 0 0 ath10k_pci 0002:01:00.0: [493]: 0x5a946040 0 1 0 0 ath10k_pci 0002:01:00.0: [494]: 0x59909040 0 1 0 0 ath10k_pci 0002:01:00.0: [495]: 0x5ae5a040 0 1 0 0 ath10k_pci 0002:01:00.0: [496]: 0x58096040 0 1 0 0 ath10k_pci 0002:01:00.0: [497]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [498]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [499]: 0x5c1e0040 0 1 0 0 ath10k_pci 0002:01:00.0: [500]: 0x58153040 0 1 0 0 ath10k_pci 0002:01:00.0: [501]: 0x58129040 0 1 0 0 ath10k_pci 0002:01:00.0: [502]: 0x5952f040 0 1 0 0 ath10k_pci 0002:01:00.0: [503]: 0x59535040 0 1 0 0 ath10k_pci 0002:01:00.0: [504]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [505]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [506]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [507]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [508]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [509]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [510]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [511]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [512]: 0x5adcc040 0 1 0 0 ath10k_pci 0002:01:00.0: [513]: 0x5cf3d040 0 1 0 0 ath10k_pci 0002:01:00.0: [514]: 0x5c1e9040 64 1 0 0 ath10k_pci 0002:01:00.0: [515]: 0x00000000 0 0 0 0 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-29ath9k_hw: check if the chip failed to wake upFelix Fietkau
commit a34d0a0da1abae46a5f6ebd06fb0ec484ca099d9 upstream. In an RFC patch, Sven Eckelmann and Simon Wunderlich reported: "QCA 802.11n chips (especially AR9330/AR9340) sometimes end up in a state in which a read of AR_CFG always returns 0xdeadbeef. This should not happen when when the power_mode of the device is ATH9K_PM_AWAKE." Include the check for the default register state in the existing MAC hang check. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24rtl8187: Fix NULL pointer dereference in priv->conf_mutexSudhir Sreedharan
commit 7972326a26b5bf8dc2adac575c4e03ee7e9d193a upstream. This can be reproduced by bind/unbind the driver multiple times in AM3517 board. Analysis revealed that rtl8187_start() was invoked before probe finishes(ie. before the mutex is initialized). INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) [<c010e0d8>] (unwind_backtrace) from [<c010beac>] (show_stack+0x10/0x14) [<c010beac>] (show_stack) from [<c017401c>] (register_lock_class+0x4f4/0x55c) [<c017401c>] (register_lock_class) from [<c0176fe0>] (__lock_acquire+0x74/0x1938) [<c0176fe0>] (__lock_acquire) from [<c0178cfc>] (lock_acquire+0xfc/0x23c) [<c0178cfc>] (lock_acquire) from [<c08aa2f8>] (mutex_lock_nested+0x50/0x3b0) [<c08aa2f8>] (mutex_lock_nested) from [<c05f5bf8>] (rtl8187_start+0x2c/0xd54) [<c05f5bf8>] (rtl8187_start) from [<c082dea0>] (drv_start+0xa8/0x320) [<c082dea0>] (drv_start) from [<c084d1d4>] (ieee80211_do_open+0x2bc/0x8e4) [<c084d1d4>] (ieee80211_do_open) from [<c069be94>] (__dev_open+0xb8/0x120) [<c069be94>] (__dev_open) from [<c069c11c>] (__dev_change_flags+0x88/0x14c) [<c069c11c>] (__dev_change_flags) from [<c069c1f8>] (dev_change_flags+0x18/0x48) [<c069c1f8>] (dev_change_flags) from [<c0710b08>] (devinet_ioctl+0x738/0x840) [<c0710b08>] (devinet_ioctl) from [<c067925c>] (sock_ioctl+0x164/0x2f4) [<c067925c>] (sock_ioctl) from [<c02883f8>] (do_vfs_ioctl+0x8c/0x9d0) [<c02883f8>] (do_vfs_ioctl) from [<c0288da8>] (SyS_ioctl+0x6c/0x7c) [<c0288da8>] (SyS_ioctl) from [<c0107760>] (ret_fast_syscall+0x0/0x1c) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = cd1ec000 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) task: ce73eec0 task.stack: cd1ea000 PC is at mutex_lock_nested+0xe8/0x3b0 LR is at mutex_lock_nested+0xd0/0x3b0 Cc: stable@vger.kernel.org Signed-off-by: Sudhir Sreedharan <ssreedharan@mvista.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13wl1251: check return from call to wl1251_acx_arp_ip_filterColin Ian King
[ Upstream commit ac1181c60822292176ab96912208ec9f9819faf8 ] Currently the less than zero error check on ret is incorrect as it is checking a far earlier ret assignment rather than the return from the call to wl1251_acx_arp_ip_filter. Fix this by adding in the missing assginment. Detected by CoverityScan, CID#1164835 ("Logically dead code") Fixes: 204cc5c44fb6 ("wl1251: implement hardware ARP filtering") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ray_cs: Avoid reading past end of bufferKees Cook
[ Upstream commit e48d661eb13f2f83861428f001c567fdb3f317e8 ] Using memcpy() from a buffer that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. In this case, the source was made longer, since it did not match the destination structure size. Additionally removes a needless cast. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ath5k: fix memory leak on buf on failed eeprom readColin Ian King
[ Upstream commit 8fed6823e06e43ee9cf7c0ffecec2f9111ce6201 ] The AR5K_EEPROM_READ macro returns with -EIO if a read error occurs causing a memory leak on the allocated buffer buf. Fix this by explicitly calling ath5k_hw_nvram_read and exiting on the via the freebuf label that performs the necessary free'ing of buf when a read error occurs. Detected by CoverityScan, CID#1248782 ("Resource Leak") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-19 11:46:36 +0000