summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-03-26stmmac: start adding pcs and rgmii core irqGiuseppe CAVALLARO
This patch starts adding in the main ISR the management of the PCS and RGMII/SGMII core interrupts. This is to help further development on this area. Currently the core irq handler only clears the PCS and S-R_MII interrupts and reports the event in the ethtool stats. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Byungho An <bh74.an@samsung.com> Cc: Udit Kumar <udit-dlh.kumar@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26stmmac: support extend descriptorsGiuseppe CAVALLARO
This patch is to support the extend descriptors available in the chips newer than the 3.50. In case of the extend descriptors cannot be supported, at runtime, the driver will continue to work using the old style. In detail, this support extends the main descriptor structure adding new descriptors: 4, 5, 6, 7. The desc4 gives us extra information about the received ethernet payload when it is carrying PTP packets or TCP/UDP/ICMP over IP packets. The descriptors 6 and 7 are used for saving HW L/H timestamps (PTP). V2: this new version removes the Koption added in the first implementation because all the checks now to verify if the extended descriptors are actually supported happen at probe time. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26stmmac: reorganize chain/ring modes removing KoptionsGiuseppe CAVALLARO
Previously we had two Koptions to decide if the stmmac had to use either a ring or a chain to manage its descriptors. This patch removes the Kernel configuration options and it allow us to use the chain mode by passing a module option. Ring mode continues to be the default. Also with this patch, it will be easier to validate the driver built and guarantee that all the two modes always compile fine. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26bonding: cleanup unneeded rcu_read_lock()Veaceslav Falico
bond_resend_igmp_join_requests_delayed() calls _resend_igmp_join_requests() under rcu_read_lock(), while it gets its own rcu_read_lock() for the whole function. Remove the lock from the _delayed function. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26net: wireless: iwlegacy: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/net/wireless/iwlegacy/common.c:4894:1: warning: 'il_pci_suspend' defined but not used [-Wunused-function] drivers/net/wireless/iwlegacy/common.c:4912:1: warning: 'il_pci_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26net: ethernet: atheros: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/net/ethernet/atheros/atlx/atl1.c:2861:12: warning: 'atl1_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26net: ethernet: wiznet: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/net/ethernet/wiznet/w5100.c:758:12: warning: 'w5100_suspend' defined but not used [-Wunused-function] drivers/net/ethernet/wiznet/w5100.c:773:12: warning: 'w5100_resume' defined but not used [-Wunused-function] drivers/net/ethernet/wiznet/w5300.c:670:12: warning: 'w5300_suspend' defined but not used [-Wunused-function] drivers/net/ethernet/wiznet/w5300.c:685:12: warning: 'w5300_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26netback: set transport header before passing it to kernelJason Wang
Currently, for the packets receives from netback, before doing header check, kernel just reset the transport header in netif_receive_skb() which pretends non l4 header. This is suboptimal for precise packet length estimation (introduced in 1def9238: net_sched: more precise pkt_len computation) which needs correct l4 header for gso packets. The patch just reuse the header probed by netback for partial checksum packets and tries to use skb_flow_dissect() for other cases, if both fail, just pretend no l4 header. Cc: Eric Dumazet <edumazet@google.com> Cc: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26tuntap: set transport header before passing it to kernelJason Wang
Currently, for the packets receives from tuntap, before doing header check, kernel just reset the transport header in netif_receive_skb() which pretends no l4 header. This is suboptimal for precise packet length estimation (introduced in 1def9238) which needs correct l4 header for gso packets. So this patch set the transport header to csum_start for partial checksum packets, otherwise it first try skb_flow_dissect(), if it fails, just reset the transport header. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26macvtap: set transport header before passing skb to lower deviceJason Wang
Set the transport header for 1) some drivers (e.g ixgbe) needs l4 header 2) precise packet length estimation (introduced in 1def9238) needs l4 header to compute header length. For the packets with partial checksum, the patch just set the transport header to csum_start. Otherwise tries to use skb_flow_dissect() to get l4 offset, if it fails, just pretend no l4 header. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26net/davinci_emac: use devres APIsSekhar Nori
Use devres APIs where possible to simplify error handling in driver probe. While at it, also rename the goto targets in error path to introduce some consistency in how they are named. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26VXLAN: Use IP Tunnels tunnel ENC encap APIPravin B Shelar
Use common ecn_encap functions from ip_tunnel module. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26VXLAN: Fix vxlan stats handling.Pravin B Shelar
Fixes bug in VXLAN code where is iptunnel_xmit() called with NULL dev->tstats. This bug was introduced in commit 6aed0c8bf7d2f389b (tunnel: use iptunnel_xmit() again). Following patch fixes bug by setting dev->tstats. It uses ip_tunnel module code to share stats function. CC: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26GRE: Refactor GRE tunneling code.Pravin B Shelar
Following patch refactors GRE code into ip tunneling code and GRE specific code. Common tunneling code is moved to ip_tunnel module. ip_tunnel module is written as generic library which can be used by different tunneling implementations. ip_tunnel module contains following components: - packet xmit and rcv generic code. xmit flow looks like (gre_xmit/ipip_xmit)->ip_tunnel_xmit->ip_local_out. - hash table of all devices. - lookup for tunnel devices. - control plane operations like device create, destroy, ioctl, netlink operations code. - registration for tunneling modules, like gre, ipip etc. - define single pcpu_tstats dev->tstats. - struct tnl_ptk_info added to pass parsed tunnel packet parameters. ipip.h header is renamed to ip_tunnel.h Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25xen-netback: remove skb in xen_netbk_alloc_pageWei Liu
This variable is never used. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25xen-netfront: frags -> slots in xennet_get_responsesWei Liu
This function is in fact counting the ring slots required for responses. Separate the concepts of ring slots and skb frags make the code clearer, as now netfront and netback can have different MAX_SKB_FRAGS, slot and frag are not mapped 1:1 any more. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25xen-netfront: remove unused variable `extra'Wei Liu
This variable is supposed to hold reference to the last extra_info in the loop. However there is only type of extra info here and the loop to process extra info is missing, so this variable is never used and causes confusion. Remove it at the moment. We can add it back when necessary. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25net: fec: build fec.c and fec_ptp.c to one moduleFrank Li
fec_ptp.ko can't run individually rename fec.c to fec_main.c Build fec.o and fec_ptp.o into one fec.ko Remove unnessary EXPORT_SYMBOL in fec_ptp Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-24mv643xx_eth: defer probing if Marvell Orion MDIO driver not loadedSimon Baatz
When both the Marvell MV643XX ethernet driver and the Orion MDIO driver are compiled as modules, the ethernet driver may be probed before the MDIO driver. Let mv643xx_eth_probe() return EPROBE_DEFER in this case, i.e. when it cannot find the PHY. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-24net: mvmdio: define module alias for platform deviceSimon Baatz
The mvmdio driver can be instantiated using device tree or as a classic platform device. In order to load the driver automatically by udev in the latter case, the driver needs to define a module alias for the platform device. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Pull to get the thermal netlink multicast group name fix, otherwise the assertion added in net-next to netlink to detect that kind of bug makes systems unbootable for some folks. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22qlcnic: Bump up the version to 5.1.38Shahed Shaikh
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22qlcnic: Clear link status when interface is downShahed Shaikh
o When interface is down, mailbox command to get context statistics fails. So restrict driver from issuing get statistics command when interface is down. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22qlcnic: change mdelay to msleepShahed Shaikh
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22qlcnic: Log warning message for 83xx adapter in MSI mode.Himanshu Madhani
o 83xx adapter does not support MSI interrupts, display warning whenever module parameter is used to load driver in MSI mode. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22qlcnic: Fix configure mailbox interrupt command for 83xx adapterManish chopra
o Due to improper data type of variable "type", interrupt resources were not getting deleted in hardware which was causing resource exhaustion in hardware. Hence mailbox command fails after some iterations of context change. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22mv643xx_eth: convert to use the Marvell Orion MDIO driverFlorian Fainelli
This patch converts the Marvell MV643XX ethernet driver to use the Marvell Orion MDIO driver. As a result, PowerPC and ARM platforms registering the Marvell MV643XX ethernet driver are also updated to register a Marvell Orion MDIO driver. This driver voluntarily overlaps with the Marvell Ethernet shared registers because it will use a subset of this shared register (shared_base + 0x4 to shared_base + 0x84). The Ethernet driver is also updated to look up for a PHY device using the Orion MDIO bus driver. For ARM and PowerPC we register a single instance of the "mvmdio" driver in the system like it used to be done with the use of the "shared_smi" platform_data cookie on ARM. Note that it is safe to register the mvmdio driver only for the "ge00" instance of the driver because this "ge00" interface is guaranteed to always be explicitely registered by consumers of arch/arm/plat-orion/common.c and other instances (ge01, ge10 and ge11) were all pointing their shared_smi to ge00. For PowerPC the in-tree Device Tree Source files mention only one MV643XX ethernet MAC instance so the MDIO bus driver is registered only when id == 0. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22net: mvmdio: enhance driver to support SMI error/done interruptsFlorian Fainelli
This patch enhances the "mvmdio" to support a SMI error/done interrupt line which can be used along with a wait queue instead of doing busy-waiting on the registers. This is a feature which is available in the mv643xx_eth SMI code and thus reduces again the gap between the two. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22net: mvmdio: rename base register cookie from smireg to regsFlorian Fainelli
This patch renames the base register cookie in the mvmdio drive from "smireg" to "regs" since a subsequent patch is going to use an ioremap() cookie whose size is larger than a single register of 4 bytes. No functionnal code change introduced. Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22net: mvmdio: allow platform device style registrationFlorian Fainelli
This patch changes the mvmdio driver not to use device tree helper functions such as of_mdiobus_register() and of_iomap() so we can instantiate this driver using a classic platform_device approach. Use the device manager helper to ioremap() the base register cookie so we get automatic freeing upon error and removal. This change is harmless for Device Tree platforms because they will get the driver be registered the same way as it was before. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22s6gmac: fix error return code in s6gmac_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22bnx2x: increase inner ip id during encapsulated tsoDmitry Kravkov
57712/578xx devices during handling of encapsulated TSO can properly increase ip id for only one ip header. The patch selects inner header to be increased. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> CC: Eilon Greenstein <eilong@broadcom.com> CC: Ariel Elior <ariele@broadcom.com> CC: Maciej Zenczykowski <maze@google.com> CC: Jesse Gross <jesse@nicira.com> Reported-by: Eric Dumazet <edumazet@google.com> Tested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22virtio: remove obsolete virtqueue_get_queue_index()Rusty Russell
You can access it directly now, since 3.8: v3.7-rc1-13-g06ca287 'virtio: move queue_index and num_free fields into core struct virtqueue.' Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22net: Fix p3_gelic_net sparse warningsGeoff Levand
Rearrange routines to avoid local declarations and remove unnecessary inline tags. No functional changes. Fixes sparse warnings like these: ps3_gelic_net.c: error: marked inline, but without a definition Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22appletalk: remove "config IPDDP_DECAP"Paul Bolle
The Kconfig symbol IPDDP_DECAP got added in v2.1.75. It has never been used. Its entry can safely be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21sh_eth: fix unused variable warningSergei Shtylyov
Commit d5e07e69218fd9aa21d6c8c5ccc629d92bdb9b0f (sh_eth: use managed device API) has caused this warning (due to my overlook): drivers/net/ethernet/renesas/sh_eth.c: In function `sh_eth_drv_remove': drivers/net/ethernet/renesas/sh_eth.c:2482:25: warning: unused variable `mdp' [-Wunused-variable] Kill the darn variable now... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21sh_eth: use managed device APISergei Shtylyov
Switch the driver to the managed device API by replacing ioremap() calls with devm_ioremap_resource() (that will also result in calling request_mem_region() which the driver forgot to do until now) and k[mz]alloc() with devm_kzalloc() -- this permits to simplify driver's probe()/remove() method cleanup. We can now remove the ioremap() error messages since the error messages are printed by devm_ioremap_resource() itself. We can also remove the 'bitbang' field from 'struct sh_eth_private' as we don't need it anymore in order to free the memory behind it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21sh_eth: kill unneeded typecast in sh_eth_drv_probe()Sergei Shtylyov
sh_eth_drv_probe() does cast from 'void *' when assigning to the 'pd' variable which is automatic anyway. Turn the assignment into initializer, while removing the cast... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21sh_eth: use PIR_* bitsSergei Shtylyov
sh_mdio_init() uses the bare numbers instead of the PHY interface bits, despite these are declared in sh_eth.h as 'enum PIR_BIT'... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21net/mlx4_core: Disallow releasing VF QPs which have steering rulesHadar Hen Zion
VF QPs must not be released when they have steering rules attached to them. For that end, introduce a reference count field to the QP object in the SRIOV resource tracker which is incremented/decremented when steering rules are attached/detached to it. QPs can be released by VF only when their ref count is zero. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21net/mlx4_core: Always use 64 bit resource ID when doing lookupHadar Hen Zion
One of the resource tracker code paths was wrongly using int and not u64 for resource tracking IDs, fix it. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21net/mlx4_en: Remove ethtool flow steering rules before releasing QPsHadar Hen Zion
Fix the ethtool flow steering rules cleanup to be carried out before releasing the RX QPs. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21net/mlx4_core: Fix wrong order of flow steering resources removalHadar Hen Zion
On the resource tracker cleanup flow, the DMFS rules must be deleted before we destroy the QPs, else the HW may attempt doing packet steering to non existent QPs. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21net/mlx4_core: Fix wrong mask applied on EQ numbers in the wrapperMoshe Lazer
Currently the mask is wrongly set in the MAP_EQ wrapper, fix that. Without the fix any EQ number above 511 is mapped to one below 511. Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21gianfar: Remove superfluous kernel_dropped local counterClaudiu Manoil
The GRO_DROP return code is handled by the core network layer. The current kernel approach is to factorize this kind of statistics into the upper layers, instead of having all the drivers maintaining them. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21gianfar: Cleanup dead code and minor formattingClaudiu Manoil
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21gianfar: Remove 'maybe-uninitialized' compile warningClaudiu Manoil
Warning message: warning: 'budget_per_q' may be used uninitialized in this function budget_per_q won't be used uninitialized since the only time it doesn't get initialized is when entering gfar_poll with num_act_queues == 0, meaning rstat_rxf == 0, in which case budget_per_q is not utilized (as it has no meaning). Inititalize budget_per_q to 0 though to suppress this compile warning. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21net: ethernet: cpsw: fix erroneous condition in error checkLothar Waßmann
The error check in cpsw_probe_dt() has an '&&' where an '||' is meant to be. This causes a NULL pointer dereference when incomplet DT data is passed to the driver ('phy_id' property for cpsw_emac1 missing). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21net: sh-eth: Use pr_err instead of printkNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21lantiq_etop: use free_netdev(netdev) instead of kfree()Wei Yongjun
Freeing netdev without free_netdev() leads to net, tx leaks. And it may lead to dereferencing freed pointer. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-09 19:51:56 +0000