summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2015-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "A lot of Thanksgiving turkey leftovers accumulated, here goes: 1) Fix bluetooth l2cap_chan object leak, from Johan Hedberg. 2) IDs for some new iwlwifi chips, from Oren Givon. 3) Fix rtlwifi lockups on boot, from Larry Finger. 4) Fix memory leak in fm10k, from Stephen Hemminger. 5) We have a route leak in the ipv6 tunnel infrastructure, fix from Paolo Abeni. 6) Fix buffer pointer handling in arm64 bpf JIT,f rom Zi Shen Lim. 7) Wrong lockdep annotations in tcp md5 support, fix from Eric Dumazet. 8) Work around some middle boxes which prevent proper handling of TCP Fast Open, from Yuchung Cheng. 9) TCP repair can do huge kmalloc() requests, build paged SKBs instead. From Eric Dumazet. 10) Fix msg_controllen overflow in scm_detach_fds, from Daniel Borkmann. 11) Fix device leaks on ipmr table destruction in ipv4 and ipv6, from Nikolay Aleksandrov. 12) Fix use after free in epoll with AF_UNIX sockets, from Rainer Weikusat. 13) Fix double free in VRF code, from Nikolay Aleksandrov. 14) Fix skb leaks on socket receive queue in tipc, from Ying Xue. 15) Fix ifup/ifdown crach in xgene driver, from Iyappan Subramanian. 16) Fix clearing of persistent array maps in bpf, from Daniel Borkmann. 17) In TCP, for the cross-SYN case, we don't initialize tp->copied_seq early enough. From Eric Dumazet. 18) Fix out of bounds accesses in bpf array implementation when updating elements, from Daniel Borkmann. 19) Fill gaps in RCU protection of np->opt in ipv6 stack, from Eric Dumazet. 20) When dumping proxy neigh entries, we have to accomodate NULL device pointers properly, from Konstantin Khlebnikov. 21) SCTP doesn't release all ipv6 socket resources properly, fix from Eric Dumazet. 22) Prevent underflows of sch->q.qlen for multiqueue packet schedulers, also from Eric Dumazet. 23) Fix MAC and unicast list handling in bnxt_en driver, from Jeffrey Huang and Michael Chan. 24) Don't actively scan radar channels, from Antonio Quartulli" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (110 commits) net: phy: reset only targeted phy bnxt_en: Setup uc_list mac filters after resetting the chip. bnxt_en: enforce proper storing of MAC address bnxt_en: Fixed incorrect implementation of ndo_set_mac_address net: lpc_eth: remove irq > NR_IRQS check from probe() net_sched: fix qdisc_tree_decrease_qlen() races openvswitch: fix hangup on vxlan/gre/geneve device deletion ipv4: igmp: Allow removing groups from a removed interface ipv6: sctp: implement sctp_v6_destroy_sock() arm64: bpf: add 'store immediate' instruction ipv6: kill sk_dst_lock ipv6: sctp: add rcu protection around np->opt net/neighbour: fix crash at dumping device-agnostic proxy entries sctp: use GFP_USER for user-controlled kmalloc sctp: convert sack_needed and sack_generation to bits ipv6: add complete rcu protection around np->opt bpf: fix allocation warnings in bpf maps and integer overflow mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0 net: mvneta: enable setting custom TX IP checksum limit net: mvneta: fix error path for building skb ...
2015-12-03net: phy: reset only targeted phyJérôme Pouiller
It is possible to address another chip on same MDIO bus. The case is correctly handled for media advertising. It is taken into account only if mii_data->phy_id == phydev->addr. However, this condition was missing for reset case. Signed-off-by: Jérôme Pouiller <jezz@sysmic.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03bnxt_en: Setup uc_list mac filters after resetting the chip.Michael Chan
Call bnxt_cfg_rx_mode() in bnxt_init_chip() to setup uc_list and mc_list mac address filters. Before the patch, uc_list is not setup again after chip reset (such as ethtool ring size change) and macvlans don't work any more after that. Modify bnxt_cfg_rx_mode() to return error codes appropriately so that the init chip sequence can detect any failures. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03bnxt_en: enforce proper storing of MAC addressJeffrey Huang
For PF, the bp->pf.mac_addr always holds the permanent MAC addr assigned by the HW. For VF, the bp->vf.mac_addr always holds the administrator assigned VF MAC addr. The random generated VF MAC addr should never get stored to bp->vf.mac_addr. This way, when the VF wants to change the MAC address, we can tell if the adminstrator has already set it and disallow the VF from changing it. v2: Fix compile error if CONFIG_BNXT_SRIOV is not set. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03bnxt_en: Fixed incorrect implementation of ndo_set_mac_addressJeffrey Huang
The existing ndo_set_mac_address only copies the new MAC addr and didn't set the new MAC addr to the HW. The correct way is to delete the existing default MAC filter from HW and add the new one. Because of RFS filters are also dependent on the default mac filter l2 context, the driver must go thru close_nic() to delete the default MAC and RFS filters, then open_nic() to set the default MAC address to HW. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: lpc_eth: remove irq > NR_IRQS check from probe()Vladimir Zapolskiy
If the driver is used on an ARM platform with SPARSE_IRQ defined, semantics of NR_IRQS is different (minimal value of virtual irqs) and by default it is set to 16, see arch/arm/include/asm/irq.h. This value may be less than the actual number of virtual irqs, which may break the driver initialization. The check removal allows to use the driver on such a platform, and, if irq controller driver works correctly, the check is not needed on legacy platforms. Fixes a runtime problem: lpc-eth 31060000.ethernet: error getting resources. lpc_eth: lpc-eth: not found (-6). Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: mvneta: enable setting custom TX IP checksum limitMarcin Wojtas
Since Armada 38x SoC can support IP checksum for jumbo frames only on a single port, it means that this feature should be enabled per-port, rather than for the whole SoC. This patch enables setting custom TX IP checksum limit by adding new optional property to the mvneta device tree node. If not used, by default 1600B is set for "marvell,armada-370-neta" and 9800B for other strings, which ensures backward compatibility. Binding documentation is updated accordingly. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: mvneta: fix error path for building skbMarcin Wojtas
In the actual RX processing, there is same error path for both descriptor ring refilling and building skb fails. This is not correct, because after successful refill, the ring is already updated with newly allocated buffer. Then, in case of build_skb() fail, hitherto code left the original buffer unmapped. This patch fixes above situation by swapping error check of skb build with DMA-unmap of original buffer. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Acked-by: Simon Guinot <simon.guinot@sequanux.org> Cc: <stable@vger.kernel.org> # v4.2+ Fixes a84e32894191 ("net: mvneta: fix refilling for Rx DMA buffers") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: mvneta: fix bit assignment for RX packet irq enableMarcin Wojtas
A value originally defined in the driver was inappropriate. Even though the ingress was somehow working, writing MVNETA_RXQ_INTR_ENABLE_ALL_MASK to MVNETA_INTR_ENABLE didn't make any effect, because the bits [31:16] are reserved and read-only. This commit updates MVNETA_RXQ_INTR_ENABLE_ALL_MASK to be compliant with the controller's documentation. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: mvneta: fix bit assignment in MVNETA_RXQ_CONFIG_REGMarcin Wojtas
MVNETA_RXQ_HW_BUF_ALLOC bit which controls enabling hardware buffer allocation was mistakenly set as BIT(1). This commit fixes the assignment. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: mvneta: add configuration for MBUS windows access protectionMarcin Wojtas
This commit adds missing configuration of MBUS windows access protection in mvneta_conf_mbus_windows function - a dedicated variable for that purpose remained there unused since v3.8 initial mvneta support. Because of that the register contents were inherited from the bootloader. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Enable BGX LMAC's RX/TX only after VF is upSunil Goutham
Enable or disable BGX LMAC's RX/TX based on corresponding VF's status. If otherwise, when multiple LMAC's physical link is up then packets from all LMAC's whose corresponding VF is not yet initialized will get forwarded to VF0. This is due to VNIC's default configuration where CPI, RSSI e.t.c point to VF0/QSET0/RQ0. This patch will prevent multiple copies of packets on VF0. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Switchon carrier only upon interface link upSunil Goutham
Call netif_carrier_on() only if interface's link is up. Switching this on upon IFF_UP by default, is causing issues with ethernet channel bonding in LACP mode. Initial NETDEV_CHANGE notification was being skipped. Also fixed some issues with link/speed/duplex reporting via ethtool. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Set CQ timer threshold properlySunil Goutham
Properly set CQ timer threshold and also set it to 2us. With previous incorrect settings it was set to 0.5us which is too less. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Wait for delayed work to finish before destroying itThanneeru Srinivasulu
While VNIC or BGX driver teardown, wait for already scheduled delayed work to finish before destroying it. Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Force to load octeon-mdio before bgx driver.Thanneeru Srinivasulu
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATAEric Dumazet
This patch is a cleanup to make following patch easier to review. Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA from (struct socket)->flags to a (struct socket_wq)->flags to benefit from RCU protection in sock_wake_async() To ease backports, we rename both constants. Two new helpers, sk_set_bit(int nr, struct sock *sk) and sk_clear_bit(int net, struct sock *sk) are added so that following patch can change their implementation. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01vmxnet3: fix checks for dma mapping errorsAlexey Khoroshilov
vmxnet3_drv does not check dma_addr with dma_mapping_error() after mapping dma memory. The patch adds the checks and tries to handle failures. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01wan/x25: Fix use-after-free in x25_asy_open_tty()Peter Hurley
The N_X25 line discipline may access the previous line discipline's closed and already-freed private data on open [1]. The tty->disc_data field _never_ refers to valid data on entry to the line discipline's open() method. Rather, the ldisc is expected to initialize that field for its own use for the lifetime of the instance (ie. from open() to close() only). [1] [ 634.336761] ================================================================== [ 634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0 [ 634.339558] Read of size 4 by task syzkaller_execu/8981 [ 634.340359] ============================================================================= [ 634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected ... [ 634.405018] Call Trace: [ 634.405277] dump_stack (lib/dump_stack.c:52) [ 634.405775] print_trailer (mm/slub.c:655) [ 634.406361] object_err (mm/slub.c:662) [ 634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236) [ 634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279) [ 634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1)) [ 634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447) [ 634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567) [ 634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879) [ 634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607) [ 634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613) [ 634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188) Reported-and-tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30net: fsl: Fix error checking for platform_get_irq()Mark Brown
The gianfar driver has recently been enabled on arm64 but fails to build since it check the return value of platform_get_irq() against NO_IRQ. Fix this by instead checking for a negative error code. Even on ARM where this code was previously being built this check was incorrect since platform_get_irq() returns a negative error code which may not be exactly the (unsigned int)(-1) that NO_IRQ is defined to be. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30net: fsl: Don't use NO_IRQ to check return value of irq_of_parse_and_map()Mark Brown
This driver can be built on arm64 but relies on NO_IRQ to check the return value of irq_of_parse_and_map() which fails to build on arm64 because the architecture does not provide a NO_IRQ. Fix this to correctly check the return value of irq_of_parse_and_map(). Even on ARM systems where the driver was previously used the check was broken since on ARM NO_IRQ is -1 but irq_of_parse_and_map() returns 0 on error. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30stmmac: fix oversized frame receptionGiuseppe CAVALLARO
The receive skb buffers can be preallocated when the link is opened according to mtu size. While testing on a network environment with not standard MTU (e.g. 3000), a panic occurred if an incoming packet had a length greater than rx skb buffer size. This is because the HW is programmed to copy, from the DMA, an Jumbo frame and the Sw must check if the allocated buffer is enough to store the frame. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30stmmac: fix PHY reset during resumeGiuseppe CAVALLARO
When stmmac_mdio_reset, was called from stmmac_resume, it was not resetting the PHY due to which MAC was not getting reset properly and hence ethernet interface not was resumed properly. The issue was currently only reproducible on stih301-b2204. Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30stmmac: dwmac-sti: fix st,tx-retime-src checkGiuseppe CAVALLARO
In case of the st,tx-retime-src is missing from device-tree (it's an optional field) the driver will invoke the strcasecmp to check which clock has been selected and this is a bug; the else condition is needed. In the dwmac_setup, the "rs" variable, passed to the strcasecmp, was not initialized and the compiler, depending on the options adopted, could take it in some different part of the stack generating the hang in such configuration. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30stmmac: fix csr clock divisor for 300MHzGiuseppe CAVALLARO
This patch is to fix the csr clock in case of 300MHz is provided. Reported-by: Kent Borg <Kent.Borg@csr.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30stmmac: fix a filter problem after resuming.Giuseppe CAVALLARO
When resume the HW is re-configured but some settings can be lost. For example, the MAC Address_X High/Low Registers used for VLAN tagging.. So, while resuming, the set_filter callback needs to be invoked to re-program perfect and hash-table registers. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-29drivers: net: xgene: fix possible use after freeEric Dumazet
Once TX has been enabled on a NIC, it is illegal to access skb, as this skb might have been freed by another cpu, from TX completion handler. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Cc: Iyappan Subramanian <isubramanian@apm.com> Acked-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24drivers: net: xgene: fix: ifconfig up/down crashIyappan Subramanian
Fixing kernel crash when doing ifconfig down and up in a loop, [ 124.028237] Call trace: [ 124.030670] [<ffffffc000367ce0>] memcpy+0x20/0x180 [ 124.035436] [<ffffffc00053c250>] skb_clone+0x3c/0xa8 [ 124.040374] [<ffffffc00053ffa4>] __skb_tstamp_tx+0xc0/0x118 [ 124.045918] [<ffffffc00054000c>] skb_tstamp_tx+0x10/0x1c [ 124.051203] [<ffffffc00049bc84>] xgene_enet_start_xmit+0x2e4/0x33c [ 124.057352] [<ffffffc00054fc20>] dev_hard_start_xmit+0x2e8/0x400 [ 124.063327] [<ffffffc00056cb14>] sch_direct_xmit+0x90/0x1d4 [ 124.068870] [<ffffffc000550100>] __dev_queue_xmit+0x28c/0x498 [ 124.074585] [<ffffffc00055031c>] dev_queue_xmit_sk+0x10/0x1c [ 124.080216] [<ffffffc0005c3f14>] ip_finish_output2+0x3d0/0x438 [ 124.086017] [<ffffffc0005c5794>] ip_finish_output+0x198/0x1ac [ 124.091732] [<ffffffc0005c61d4>] ip_output+0xec/0x164 [ 124.096755] [<ffffffc0005c5910>] ip_local_out_sk+0x38/0x48 [ 124.102211] [<ffffffc0005c5d84>] ip_queue_xmit+0x288/0x330 [ 124.107668] [<ffffffc0005da8bc>] tcp_transmit_skb+0x908/0x964 [ 124.113383] [<ffffffc0005dc0d4>] tcp_send_ack+0x128/0x138 [ 124.118753] [<ffffffc0005d1580>] __tcp_ack_snd_check+0x5c/0x94 [ 124.124555] [<ffffffc0005d7a0c>] tcp_rcv_established+0x554/0x68c [ 124.130530] [<ffffffc0005df0d4>] tcp_v4_do_rcv+0xa4/0x37c [ 124.135900] [<ffffffc000539430>] release_sock+0xb4/0x150 [ 124.141184] [<ffffffc0005cdf88>] tcp_recvmsg+0x448/0x9e0 [ 124.146468] [<ffffffc0005f2f3c>] inet_recvmsg+0xa0/0xc0 [ 124.151666] [<ffffffc000533660>] sock_recvmsg+0x10/0x1c [ 124.156863] [<ffffffc0005370d4>] SyS_recvfrom+0xa4/0xf8 [ 124.162061] Code: f2400c84 540001c0 cb040042 36000064 (38401423) [ 124.168133] ---[ end trace 7ab2550372e8a65b ]--- The fix was to reorder napi_enable, napi_disable, request_irq and free_irq calls, move register_netdev after dma_coerce_mask_and_coherent. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Khuong Dinh <kdinh@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24net: cdc_ncm: fix NULL pointer deref in cdc_ncm_bind_commonBjørn Mork
Commit 77b0a099674a ("cdc-ncm: use common parser") added a dangerous new trust in the CDC functional descriptors presented by the device, unconditionally assuming that any device handled by the driver has a CDC Union descriptor. This descriptor is required by the NCM and MBIM specs, but crashing on non-compliant devices is still unacceptable. Not only will that allow malicious devices to crash the kernel, but in this case it is also well known that there are non-compliant real devices on the market - as shown by the comment accompanying the IAD workaround in the same function. The Sierra Wireless EM7305 is an example of such device, having a CDC header and a CDC MBIM descriptor but no CDC Union: Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 12 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 14 bInterfaceProtocol 0 iInterface 0 CDC Header: bcdCDC 1.10 CDC MBIM: bcdMBIMVersion 1.00 wMaxControlMessage 4096 bNumberFilters 16 bMaxFilterSize 128 wMaxSegmentSize 4064 bmNetworkCapabilities 0x20 8-byte ntb input size Endpoint Descriptor: .. The conversion to a common parser also left the local cdc_union variable untouched. This caused the IAD workaround code to be applied to all devices with an IAD descriptor, which was never intended. Finish the conversion by testing for hdr.usb_cdc_union_desc instead. Cc: Oliver Neukum <oneukum@suse.com> Fixes: 77b0a099674a ("cdc-ncm: use common parser") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24Merge tag 'linux-can-fixes-for-4.4-20151123' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2015-11-23 this is a pull request of three patches for the upcoming v4.4 release. The first patch is by Mirza Krak, it fixes a problem with the sja1000 driver after resuming from suspend to disk, by clearing all outstanding interrupts. Oliver Hartkopp contributes two patches targeting almost all driver, they fix the assignment of the error location in CAN error messages. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-23broadcom: fix PHY_ID_BCM5481 entry in the id tableAaro Koskinen
Commit fcb26ec5b18d ("broadcom: move all PHY_ID's to header") updated broadcom_tbl to use PHY_IDs, but incorrectly replaced 0x0143bca0 with PHY_ID_BCM5482 (making a duplicate entry, and completely omitting the original). Fix that. Fixes: fcb26ec5b18d ("broadcom: move all PHY_ID's to header") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-23vrf: fix double free and memory corruption on register_netdevice failureNikolay Aleksandrov
When vrf's ->newlink is called, if register_netdevice() fails then it does free_netdev(), but that's also done by rtnl_newlink() so a second free happens and memory gets corrupted, to reproduce execute the following line a couple of times (1 - 5 usually is enough): $ for i in `seq 1 5`; do ip link add vrf: type vrf table 1; done; This works because we fail in register_netdevice() because of the wrong name "vrf:". And here's a trace of one crash: [ 28.792157] ------------[ cut here ]------------ [ 28.792407] kernel BUG at fs/namei.c:246! [ 28.792608] invalid opcode: 0000 [#1] SMP [ 28.793240] Modules linked in: vrf nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel qxl drm_kms_helper ttm drm aesni_intel aes_x86_64 psmouse glue_helper lrw evdev gf128mul i2c_piix4 ablk_helper cryptd ppdev parport_pc parport serio_raw pcspkr virtio_balloon virtio_console i2c_core acpi_cpufreq button 9pnet_virtio 9p 9pnet fscache ipv6 autofs4 ext4 crc16 mbcache jbd2 virtio_blk virtio_net sg sr_mod cdrom ata_generic ehci_pci uhci_hcd ehci_hcd e1000 usbcore usb_common ata_piix libata virtio_pci virtio_ring virtio scsi_mod floppy [ 28.796016] CPU: 0 PID: 1148 Comm: ld-linux-x86-64 Not tainted 4.4.0-rc1+ #24 [ 28.796016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 28.796016] task: ffff8800352561c0 ti: ffff88003592c000 task.ti: ffff88003592c000 [ 28.796016] RIP: 0010:[<ffffffff812187b3>] [<ffffffff812187b3>] putname+0x43/0x60 [ 28.796016] RSP: 0018:ffff88003592fe88 EFLAGS: 00010246 [ 28.796016] RAX: 0000000000000000 RBX: ffff8800352561c0 RCX: 0000000000000001 [ 28.796016] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003784f000 [ 28.796016] RBP: ffff88003592ff08 R08: 0000000000000001 R09: 0000000000000000 [ 28.796016] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 28.796016] R13: 000000000000047c R14: ffff88003784f000 R15: ffff8800358c4a00 [ 28.796016] FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 28.796016] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 28.796016] CR2: 00007ffd583bc2d9 CR3: 0000000035a99000 CR4: 00000000000406f0 [ 28.796016] Stack: [ 28.796016] ffffffff8121045d ffffffff812102d3 ffff8800352561c0 ffff880035a91660 [ 28.796016] ffff8800008a9880 0000000000000000 ffffffff81a49940 00ffffff81218684 [ 28.796016] ffff8800352561c0 000000000000047c 0000000000000000 ffff880035b36d80 [ 28.796016] Call Trace: [ 28.796016] [<ffffffff8121045d>] ? do_execveat_common.isra.34+0x74d/0x930 [ 28.796016] [<ffffffff812102d3>] ? do_execveat_common.isra.34+0x5c3/0x930 [ 28.796016] [<ffffffff8121066c>] do_execve+0x2c/0x30 [ 28.796016] [<ffffffff810939a0>] call_usermodehelper_exec_async+0xf0/0x140 [ 28.796016] [<ffffffff810938b0>] ? umh_complete+0x40/0x40 [ 28.796016] [<ffffffff815cb1af>] ret_from_fork+0x3f/0x70 [ 28.796016] Code: 48 8d 47 1c 48 89 e5 53 48 8b 37 48 89 fb 48 39 c6 74 1a 48 8b 3d 7e e9 8f 00 e8 49 fa fc ff 48 89 df e8 f1 01 fd ff 5b 5d f3 c3 <0f> 0b 48 89 fe 48 8b 3d 61 e9 8f 00 e8 2c fa fc ff 5b 5d eb e9 [ 28.796016] RIP [<ffffffff812187b3>] putname+0x43/0x60 [ 28.796016] RSP <ffff88003592fe88> Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-23net: fsl: expands dependencies of NET_VENDOR_FREESCALEShaohui Xie
Freescale hosts some ARMv8 based SoCs, and a generic convention ARCH_LAYERSCAPE is used to cover such SoCs. Adding ARCH_LAYERSCAPE to dependencies of NET_VENDOR_FREESCALE to support networking on those SoCs. The ARCH_LAYERSCAPE is introduced by: commit: 53a5fde05 arm64: Use generic Layerscape SoC family naming Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-23can: remove obsolete assignment for CAN protocol error typeOliver Hartkopp
The assignment 'cf->data[2] |= CAN_ERR_PROT_UNSPEC' used at CAN error message creation time is obsolete as CAN_ERR_PROT_UNSPEC is zero and cf->data[2] is initialized with zero in alloc_can_err_skb() anyway. So we could either assign 'cf->data[2] = CAN_ERR_PROT_UNSPEC' correctly or we can remove the obsolete OR operation entirely. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-11-23can: fix assignment of error location in CAN error messagesOliver Hartkopp
As Dan Carpenter reported in http://marc.info/?l=linux-can&m=144793696016187 the assignment of the error location in CAN error messages had some bit wise overlaps. Indeed the value to be assigned in data[3] is no bitfield but defines a single value which points to a location inside the CAN frame on the wire. This patch fixes the assignments for the error locations in error messages. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-11-23can: sja1000: clear interrupts on startMirza Krak
According to SJA1000 data sheet error-warning (EI) interrupt is not cleared by setting the controller in to reset-mode. Then if we have the following case: - system is suspended (echo mem > /sys/power/state) and SJA1000 is left in operating state - A bus error condition occurs which activates EI interrupt, system is still suspended which means EI interrupt will be not be handled nor cleared. If the above two events occur, on resume there is no way to return the SJA1000 to operating state, except to cycle power to it. By simply reading the IR register on start we will clear any previous conditions that could be present. Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com> Reported-by: Christian Magnusson <Christian.Magnusson@semcon.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-11-22Merge tag 'wireless-drivers-for-davem-2015-11-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi * bump API to firmware 19 - not released yet. * fix D3 flows (Luca) * new device IDs (Oren) * fix NULL pointer dereference (Avri) ath10k * fix invalid NSS for 4x4 devices * add QCA9377 hw1.0 support * fix QCA6174 regression with CE5 usage wil6210 * new maintainer - Maya Erez rtlwifi * rtl8821ae: Fix lockups on boot ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20various: fix pci_set_dma_mask return value checkingChristoph Hellwig
pci_set_dma_mask returns a negative errno value, not a bool like pci_dma_supported. This of course was just a giant test for attention :) Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jongman Heo <jongman.heo@samsung.com> Tested-by: Jongman Heo <jongman.heo@samsung.com> [pcnet32] Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controllerMåns Rullgård
This adds a driver for the Aurora VLSI NB8800 Ethernet controller. It is an almost complete rewrite of a driver originally found in a Sigma Designs 2.6.22 tree. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20net: tulip: turn compile-time warning into dev_warn()Arnd Bergmann
The tulip driver causes annoying build-time warnings for allmodconfig builds for all recent architectures: dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined dec/tulip/tulip_core.c:101:2: warning: #warning Processor architecture undefined! This is the last remaining warning for arm64, and I'd like to get rid of it. We don't really know the cache line size, architecturally it would be at least 16 bytes, but all implementations I found have 64 or 128 bytes. Configuring tulip for 32-byte lines as we do on ARM32 seems to be the safe but slow default, and nobody who cares about performance these days would use a tulip chip anyway, so we can just use that. To save the next person the job of trying to find out what this is for and picking a default for their architecture just to kill off the warning, I'm now removing the preprocessor #warning and turning it into a pr_warn or dev_warn that prints the equivalent information when the driver gets loaded. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20bnx2x: Fix vxlan removalYuval Mintz
Commmit ac7eccd4d48fc "bnx2x: track vxlan port count" contains a bug - Instead of achieving the required goal, vxlan configuration would not be removed since we're decrementing the port instead of the counter. CC: Jiri Benc <jbenc@redhat.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20net: cpsw: Fix ethernet regression for dm814xTony Lindgren
Commit b6745f6e4e63 ("drivers: net: cpsw: davinci_emac: move reading mac id to common file") started using of_machine_is_compatible for detecting type but missed at dm8148 causing Ethernet to stop working. Let's fix the issue by adding handling for dm814x. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Mugunthnan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18net: qmi_wwan: add XS Stick W100-2 from 4G SystemsBjørn Mork
Thomas reports " 4gsystems sells two total different LTE-surfsticks under the same name. .. The newer version of XS Stick W100 is from "omega" .. Under windows the driver switches to the same ID, and uses MI03\6 for network and MI01\6 for modem. .. echo "1c9e 9b01" > /sys/bus/usb/drivers/qmi_wwan/new_id echo "1c9e 9b01" > /sys/bus/usb-serial/drivers/option1/new_id T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b01 Rev=02.32 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Now all important things are there: wwp0s29f7u2i3 (net), ttyUSB2 (at), cdc-wdm0 (qmi), ttyUSB1 (at) There is also ttyUSB0, but it is not usable, at least not for at. The device works well with qmi and ModemManager-NetworkManager. " Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18ravb: fix WARNING in __free_irq()Sergei Shtylyov
When the R8A7795 support was added to the driver, little attention was paid to the ravb_open() error path: free_irq() for the EMAC interrupt was called uncoditionally, unlike request_irq(), and in a wrong order as well... As a result, on the R-Car gen2 SoCs I started getting the following in case of a device opening error: WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1448 __free_irq+0x8c/0x228() Trying to free already-free IRQ 0 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-rc1-dirty #1005 Hardware name: Generic R8A7791 (Flattened Device Tree) Backtrace: [<c0013818>] (dump_backtrace) from [<c00139b4>] (show_stack+0x18/0x1c) r6:c063cdd6 r5:00000009 r4:00000000 r3:00204140 [<c001399c>] (show_stack) from [<c022a578>] (dump_stack+0x74/0x90) [<c022a504>] (dump_stack) from [<c0025f04>] (warn_slowpath_common+0x8c/0xb8) r4:ef04fd38 r3:c0714770 [<c0025e78>] (warn_slowpath_common) from [<c0025fd4>] (warn_slowpath_fmt+0x38/0x40) r8:ee8ad800 r7:ef0030a0 r6:00000000 r5:00000000 r4:ef003040 [<c0025fa0>] (warn_slowpath_fmt) from [<c0064cc0>] (__free_irq+0x8c/0x228) r3:00000000 r2:c063ce9f [<c0064c34>] (__free_irq) from [<c0064ecc>] (free_irq+0x70/0xa4) r10:0000016b r8:00000000 r7:00000000 r6:ee8ad800 r5:00000000 r4:ef003040 [<c0064e5c>] (free_irq) from [<c033472c>] (ravb_open+0x224/0x274) r7:fffffffe r6:00000000 r5:fffffffe r4:ee8ad800 [<c0334508>] (ravb_open) from [<c041ac78>] (__dev_open+0x84/0x104) r7:ee8ad830 r6:c0566334 r5:00000000 r4:ee8ad800 [<c041abf4>] (__dev_open) from [<c041af08>] (__dev_change_flags+0x94/0x13c) r7:00001002 r6:00000001 r5:00001003 r4:ee8ad800 [<c041ae74>] (__dev_change_flags) from [<c041afe8>] (dev_change_flags+0x20/0x50) r7:c072e6e0 r6:00000138 r5:00001002 r4:ee8ad800 [<c041afc8>] (dev_change_flags) from [<c06ec06c>] (ip_auto_config+0x174/0xfb8) r8:00001002 r7:c072e6e0 r6:c0703344 r5:00000001 r4:ee8ad800 r3:00000101 [<c06ebef8>] (ip_auto_config) from [<c000a810>] (do_one_initcall+0x100/0x1cc) r10:c06fb83c r9:00000000 r8:c06ebef8 r7:c0736000 r6:c0710918 r5:c0710918 r4:ef2f8f80 [<c000a710>] (do_one_initcall) from [<c06ccddc>] (kernel_init_freeable+0x11c/0x1 ec) r10:c06fb83c r9:00000000 r8:0000009a r7:c0736000 r6:c0706bf0 r5:c06fb834 r4:00000007 [<c06cccc0>] (kernel_init_freeable) from [<c0514c54>] (kernel_init+0x14/0xec) r10:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0514c40 r4:c0736000 [<c0514c40>] (kernel_init) from [<c0010458>] (ret_from_fork+0x14/0x3c) r4:00000000 r3:ef04e000 Fix up the free_irq() call order and add a new label on the error path. Fixes: 22d4df8ff3a3 ("ravb: Add support for r8a7795 SoC") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18net: macb: Add support for sgmii phy interfacePunnaiah Choudary Kalluri
This patch adds support for the sgmii phy interface. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18ethernet/atheros/alx: add Killer E2400 device IDBen Pope
This patch adds the PCI device ID (0xe0a1) and alx_pci_tbl entry for the Killer E2400 Ethernet controller, modeled after the Killer E2200 controller support (0xe091) already present in the alx driver. This patch was originally authored by Ben Pope, but it got held up by issues in the commit message, so I'm resubmitting it on his behalf. I've extensively used a kernel with this patch on a System76 serw9 laptop and am quite confident it works well (at least on the hardware I have available for testing). Note that as a favor to System76, Ubuntu has been carrying this as a sauce patch in their 4.2 based Wily kernel, which presumably has given it real-world testing on other E2400 equipped hardware (I don't know of any Ubuntu kernel bugs filed about it): https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1498633 Signed-off-by: Jason Gerard DeRose <jason@system76.com> Signed-off-by: Ben Pope <benpope81@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18hdlc: fix null-deref on allocation failurestephen hemminger
If alloc_netdev() failed and return NULL, then the next instruction would dereference it. Found by Coverity. Compile tested only. Not sure if anyone still uses this driver (or the whole WAN subsystem). Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18fm10k: fix memory leakstephen hemminger
This was detected by Coverity. The function skb_cow_head leaves skb alone on failure, so caller needs to free. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix list tests in netfilter ingress support, from Florian Westphal. 2) Fix reversal of input and output interfaces in ingress hook invocation, from Pablo Neira Ayuso. 3) We have a use after free in r8169, caught by Dave Jones, fixed by Francois Romieu. 4) Splice use-after-free fix in AF_UNIX frmo Hannes Frederic Sowa. 5) Three ipv6 route handling bug fixes from Martin KaFai Lau: a) Don't create clone routes not managed by the fib6 tree b) Don't forget to check expiration of DST_NOCACHE routes. c) Handle rt->dst.from == NULL properly. 6) Several AF_PACKET fixes wrt transport header setting and SKB protocol setting, from Daniel Borkmann. 7) Fix thunder driver crash on shutdown, from Pavel Fedin. 8) Several Mellanox driver fixes (max MTU calculations, use of correct DMA unmap in TX path, etc.) from Saeed Mahameed, Tariq Toukan, Doron Tsur, Achiad Shochat, Eran Ben Elisha, and Noa Osherovich. 9) Several mv88e6060 DSA driver fixes (wrong bit definitions for certain registers, etc.) from Neil Armstrong. 10) Make sure to disable preemption while updating per-cpu stats of ip tunnels, from Jason A. Donenfeld. 11) Various ARM64 bpf JIT fixes, from Yang Shi. 12) Flush icache properly in ARM JITs, from Daniel Borkmann. 13) Fix masking of RX and TX interrupts in ravb driver, from Masaru Nagai. 14) Fix netdev feature propagation for devices not implementing ->ndo_set_features(). From Nikolay Aleksandrov. 15) Big endian fix in vmxnet3 driver, from Shrikrishna Khare. 16) RAW socket code increments incorrect SNMP counters, fix from Ben Cartwright-Cox. 17) IPv6 multicast SNMP counters are bumped twice, fix from Neil Horman. 18) Fix handling of VLAN headers on stacked devices when REORDER is disabled. From Vlad Yasevich. 19) Fix SKB leaks and use-after-free in ipvlan and macvlan drivers, from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) MAINTAINERS: Update Mellanox's Eth NIC driver entries net/core: revert "net: fix __netdev_update_features return.." and add comment af_unix: take receive queue lock while appending new skb rtnetlink: fix frame size warning in rtnl_fill_ifinfo net: use skb_clone to avoid alloc_pages failure. packet: Use PAGE_ALIGNED macro packet: Don't check frames_per_block against negative values net: phy: Use interrupts when available in NOLINK state phy: marvell: Add support for 88E1540 PHY arm64: bpf: make BPF prologue and epilogue align with ARM64 AAPCS macvlan: fix leak in macvlan_handle_frame ipvlan: fix use after free of skb ipvlan: fix leak in ipvlan_rcv_frame vlan: Do not put vlan headers back on bridge and macvlan ports vlan: Fix untag operations of stacked vlans with REORDER_HEADER off via-velocity: unconditionally drop frames with bad l2 length ipg: Remove ipg driver dl2k: Add support for IP1000A-based cards snmp: Remove duplicate OUTMCAST stat increment net: thunder: Check for driver data in nicvf_remove() ...
2015-11-17net: phy: Use interrupts when available in NOLINK stateAndrew Lunn
The NOLINK state will poll the phy once a second to see if the link has come up. If the phy has an interrupt line, this polling can be skipped, since the phy should interrupt when the link returns. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>