summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2023-12-15wifi: mwifiex: configure BSSID consistently when starting APDavid Lin
AP BSSID configuration is missing at AP start. Without this fix, FW returns STA interface MAC address after first init. When hostapd restarts, it gets MAC address from netdev before driver sets STA MAC to netdev again. Now MAC address between hostapd and net interface are different causes STA cannot connect to AP. After that MAC address of uap0 mlan0 become the same. And issue disappears after following hostapd restart (another issue is AP/STA MAC address become the same). This patch fixes the issue cleanly. Upstream-Status: Submitted [https://lore.kernel.org/all/20231215005118.17031-1-yu-hao.lin@nxp.com/] Signed-off-by: David Lin <yu-hao.lin@nxp.com> Fixes: 12190c5d80bd ("mwifiex: add cfg80211 start_ap and stop_ap handlers") Cc: stable@vger.kernel.org Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Tested-by: Rafael Beims <rafael.beims@toradex.com> # Verdin iMX8MP/SD8997 SD Acked-by: Brian Norris <briannorris@chromium.org>
2022-05-24mwifiex: Add SD8997 SDIO-UART firmwareAndrejs Cainikovs
commit 562354ab9f0aa4fcd8f2184506dcb9c18a792182 upstream. With a recent change now it is possible to detect the strapping option on SD8997, which allows to pick up a correct firmware for either SDIO-SDIO or SDIO-UART. This commit enables SDIO-UART firmware on SD8997. Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220422090313.125857-3-andrejs.cainikovs@toradex.com
2022-05-24mwifiex: Select firmware based on strappingAndrejs Cainikovs
commit 255ca28a659d3cfb069f73c7644853ed93aecdb0 upstream. Some WiFi/Bluetooth modules might have different host connection options, allowing to either use SDIO for both WiFi and Bluetooth, or SDIO for WiFi and UART for Bluetooth. It is possible to detect whether a module has SDIO-SDIO or SDIO-UART connection by reading its host strap register. This change introduces a way to automatically select appropriate firmware depending of the connection method, and removes a need of symlinking or overwriting the original firmware file with a required one. Host strap register used in this commit comes from the NXP driver [1] hosted at Code Aurora. [1] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/net/wireless/nxp/mxm_wifiex/wlan_src/mlinux/moal_sdio_mmc.c?h=rel_imx_5.4.70_2.3.2&id=688b67b2c7220b01521ffe560da7eee33042c7bd#n1274 Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220422090313.125857-2-andrejs.cainikovs@toradex.com
2022-05-19Merge remote-tracking branch 'gh-fslc/5.4-2.3.x-imx' into toradex_5.4-2.3.x-imxPhilippe Schenker
2022-05-19Merge tag 'v5.4.193' into update-to-2.3.7__5.4-2.3.x-imxPhilippe Schenker
This is the 5.4.193 stable release Conflicts: arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts drivers/edac/synopsys_edac.c drivers/mmc/host/sdhci-esdhc-imx.c drivers/mmc/host/sdhci.c drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c sound/soc/codecs/msm8916-wcd-analog.c
2022-05-13net: phy: Fix race condition on link status changeFrancesco Dolcini
commit 91a7cda1f4b8bdf770000a3b60640576dafe0cec upstream. This fixes the following error caused by a race condition between phydev->adjust_link() and a MDIO transaction in the phy interrupt handler. The issue was reproduced with the ethernet FEC driver and a micrel KSZ9031 phy. [ 146.195696] fec 2188000.ethernet eth0: MDIO read timeout [ 146.201779] ------------[ cut here ]------------ [ 146.206671] WARNING: CPU: 0 PID: 571 at drivers/net/phy/phy.c:942 phy_error+0x24/0x6c [ 146.214744] Modules linked in: bnep imx_vdoa imx_sdma evbug [ 146.220640] CPU: 0 PID: 571 Comm: irq/128-2188000 Not tainted 5.18.0-rc3-00080-gd569e86915b7 #9 [ 146.229563] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 146.236257] unwind_backtrace from show_stack+0x10/0x14 [ 146.241640] show_stack from dump_stack_lvl+0x58/0x70 [ 146.246841] dump_stack_lvl from __warn+0xb4/0x24c [ 146.251772] __warn from warn_slowpath_fmt+0x5c/0xd4 [ 146.256873] warn_slowpath_fmt from phy_error+0x24/0x6c [ 146.262249] phy_error from kszphy_handle_interrupt+0x40/0x48 [ 146.268159] kszphy_handle_interrupt from irq_thread_fn+0x1c/0x78 [ 146.274417] irq_thread_fn from irq_thread+0xf0/0x1dc [ 146.279605] irq_thread from kthread+0xe4/0x104 [ 146.284267] kthread from ret_from_fork+0x14/0x28 [ 146.289164] Exception stack(0xe6fa1fb0 to 0xe6fa1ff8) [ 146.294448] 1fa0: 00000000 00000000 00000000 00000000 [ 146.302842] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 146.311281] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 146.318262] irq event stamp: 12325 [ 146.321780] hardirqs last enabled at (12333): [<c01984c4>] __up_console_sem+0x50/0x60 [ 146.330013] hardirqs last disabled at (12342): [<c01984b0>] __up_console_sem+0x3c/0x60 [ 146.338259] softirqs last enabled at (12324): [<c01017f0>] __do_softirq+0x2c0/0x624 [ 146.346311] softirqs last disabled at (12319): [<c01300ac>] __irq_exit_rcu+0x138/0x178 [ 146.354447] ---[ end trace 0000000000000000 ]--- With the FEC driver phydev->adjust_link() calls fec_enet_adjust_link() calls fec_stop()/fec_restart() and both these function reset and temporary disable the FEC disrupting any MII transaction that could be happening at the same time. fec_enet_adjust_link() and phy_read() can be running at the same time when we have one additional interrupt before the phy_state_machine() is able to terminate. Thread 1 (phylib WQ) | Thread 2 (phy interrupt) | | phy_interrupt() <-- PHY IRQ | handle_interrupt() | phy_read() | phy_trigger_machine() | --> schedule phylib WQ | | phy_state_machine() | phy_check_link_status() | phy_link_change() | phydev->adjust_link() | fec_enet_adjust_link() | --> FEC reset | phy_interrupt() <-- PHY IRQ | phy_read() | Fix this by acquiring the phydev lock in phy_interrupt(). Link: https://lore.kernel.org/all/20220422152612.GA510015@francesco-nb.int.toradex.com/ Fixes: c974bdbc3e77 ("net: phy: Use threaded IRQ, to allow IRQ from sleeping devices") cc: <stable@vger.kernel.org> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220506060815.327382-1-francesco.dolcini@toradex.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [fd: backport: adapt locking before did_interrupt()/ack_interrupt() callbacks removal ] Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-05-12smsc911x: allow using IRQ0Sergey Shtylyov
commit 5ef9b803a4af0f5e42012176889b40bb2a978b18 upstream. The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC LAN911x Ethernet chip, so the networking on them must have been broken by commit 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure") which filtered out 0 as well as the negative error codes -- it was kinda correct at the time, as platform_get_irq() could return 0 on of_irq_get() failure and on the actual 0 in an IRQ resource. This issue was fixed by me (back in 2016!), so we should be able to fix this driver to allow IRQ0 usage again... When merging this to the stable kernels, make sure you also merge commit e330b9a6bb35 ("platform: don't return 0 from platform_get_irq[_byname]() on error") -- that's my fix to platform_get_irq() for the DT platforms... Fixes: 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/656036e4-6387-38df-b8a7-6ba683b16e63@omp.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12bnxt_en: Fix possible bnxt_open() failure caused by wrong RFS flagSomnath Kotur
commit 13ba794397e45e52893cfc21d7a69cb5f341b407 upstream. bnxt_open() can fail in this code path, especially on a VF when it fails to reserve default rings: bnxt_open() __bnxt_open_nic() bnxt_clear_int_mode() bnxt_init_dflt_ring_mode() RX rings would be set to 0 when we hit this error path. It is possible for a subsequent bnxt_open() call to potentially succeed with a code path like this: bnxt_open() bnxt_hwrm_if_change() bnxt_fw_init_one() bnxt_fw_init_one_p3() bnxt_set_dflt_rfs() bnxt_rfs_capable() bnxt_hwrm_reserve_rings() On older chips, RFS is capable if we can reserve the number of vnics that is equal to RX rings + 1. But since RX rings is still set to 0 in this code path, we may mistakenly think that RFS is supported for 0 RX rings. Later, when the default RX rings are reserved and we try to enable RFS, it would fail and cause bnxt_open() to fail unnecessarily. We fix this in 2 places. bnxt_rfs_capable() will always return false if RX rings is not yet set. bnxt_init_dflt_ring_mode() will call bnxt_set_dflt_rfs() which will always clear the RFS flags if RFS is not supported. Fixes: 20d7d1c5c9b1 ("bnxt_en: reliably allocate IRQ table on reset to avoid crash") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12net: emaclite: Add error handling for of_address_to_resource()Shravya Kumbham
commit 7a6bc33ab54923d325d9a1747ec9652c4361ebd1 upstream. check the return value of of_address_to_resource() and also add missing of_node_put() for np and npp nodes. Fixes: e0a3bc65448c ("net: emaclite: Support multiple phys connected to one MDIO bus") Addresses-Coverity: Event check_return value. Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12net: stmmac: dwmac-sun8i: add missing of_node_put() in ↵Yang Yingliang
sun8i_dwmac_register_mdio_mux() commit 1a15267b7be77e0792cf0c7b36ca65c8eb2df0d8 upstream. The node pointer returned by of_get_child_by_name() with refcount incremented, so add of_node_put() after using it. Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220428095716.540452-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12net: ethernet: mediatek: add missing of_node_put() in mtk_sgmii_init()Yang Yingliang
commit ff5265d45345d01fefc98fcb9ae891b59633c919 upstream. The node pointer returned by of_parse_phandle() with refcount incremented, so add of_node_put() after using it in mtk_sgmii_init(). Fixes: 9ffee4a8276c ("net: ethernet: mediatek: Extend SGMII related functions") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220428062543.64883-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12can: grcan: use ofdev->dev when allocating DMA memoryDaniel Hellstrom
commit 101da4268626b00d16356a6bf284d66e44c46ff9 upstream. Use the device of the device tree node should be rather than the device of the struct net_device when allocating DMA buffers. The driver got away with it on sparc32 until commit 53b7670e5735 ("sparc: factor the dma coherent mapping into helper") after which the driver oopses. Fixes: 6cec9b07fe6a ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-2-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12can: grcan: grcan_close(): fix deadlockDuoming Zhou
commit 47f070a63e735bcc8d481de31be1b5a1aa62b31c upstream. There are deadlocks caused by del_timer_sync(&priv->hang_timer) and del_timer_sync(&priv->rr_timer) in grcan_close(), one of the deadlocks are shown below: (Thread 1) | (Thread 2) | grcan_reset_timer() grcan_close() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | grcan_initiate_running_reset() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold priv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need priv->lock in position (2) of thread 2. As a result, grcan_close() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Link: https://lore.kernel.org/all/20220425042400.66517-1-duoming@zju.edu.cn Fixes: 6cec9b07fe6a ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Cc: stable@vger.kernel.org Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09net: ethernet: stmmac: fix write to sgmii_adapter_baseDinh Nguyen
commit 5fd1fe4807f91ea0cca043114d929faa11bd4190 upstream. I made a mistake with the commit a6aaa0032424 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link"). I should have tested against both scenario of having a SGMII interface and one without. Without the SGMII PCS TSE adpater, the sgmii_adapter_base address is NULL, thus a write to this address will fail. Cc: stable@vger.kernel.org Fixes: a6aaa0032424 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20220420152345.27415-1-dinguyen@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09drivers: net: hippi: Fix deadlock in rr_close()Duoming Zhou
[ Upstream commit bc6de2878429e85c1f1afaa566f7b5abb2243eef ] There is a deadlock in rr_close(), which is shown below: (Thread 1) | (Thread 2) | rr_open() rr_close() | add_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rr_timer() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold rrpriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need rrpriv->lock in position (2) of thread 2. As a result, rr_close() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09ixgbe: ensure IPsec VF<->PF compatibilityLeon Romanovsky
[ Upstream commit f049efc7f7cd2f3c419f55040928eaefb13b3636 ] The VF driver can forward any IPsec flags and such makes the function is not extendable and prone to backward/forward incompatibility. If new software runs on VF, it won't know that PF configured something completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag. Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shannon Nelson <snelson@pensando.io> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09bnx2x: fix napi API usage sequenceManish Chopra
[ Upstream commit af68656d66eda219b7f55ce8313a1da0312c79e1 ] While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34081f1 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLKMartin Blumenstingl
[ Upstream commit 71cffebf6358a7f5031f5b208bbdc1cb4db6e539 ] Commit 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp register. It helped bring this register into a well-defined state so the driver has to rely less on the bootloader to do things right. Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any possibility to configure it. Upon further testing it turns out that all boards which are supported by the GSWIP driver in OpenWrt which use an RMII PHY have a dedicated oscillator on the board which provides the 50MHz RMII reference clock. Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set the MAC also generates the RMII reference clock whose signal then conflicts with the signal from the oscillator on the board. This results in a constant cycle of the PHY detecting link up/down (and as a result of that: the two ports using the AR8030 PHYs are not working). At the time of writing this patch there's no known board where the MAC (GSWIP) has to generate the RMII reference clock. If needed this can be implemented in future by providing a device-tree flag so the GSWIP_MII_CFG_RMII_CLK bit can be toggled per port. Fixes: 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits") Tested-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: bcmgenet: hide status block before TX timestampingJonathan Lemon
[ Upstream commit acac0541d1d65e81e599ec399d34d184d2424401 ] The hardware checksum offloading requires use of a transmit status block inserted before the outgoing frame data, this was updated in '9a9ba2a4aaaa ("net: bcmgenet: always enable status blocks")' However, skb_tx_timestamp() assumes that it is passed a raw frame and PTP parsing chokes on this status block. Fix this by calling __skb_pull(), which hides the TSB before calling skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly. As the data in the skb has already been set up for DMA, and the dma_unmap_* calls use a separately stored address, there is no no effective change in the data transmission. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com Fixes: d03825fba459 ("net: bcmgenet: add skb_tx_timestamp call") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: hns3: add validity check for message data lengthJian Shen
[ Upstream commit 7d413735cb18ff73aaba3457b16b08332e8d3cc4 ] Add validity check for message data length in function hclge_send_mbx_msg(), avoid unexpected overflow. Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09hamradio: remove needs_free_netdev to avoid UAFLin Ma
commit 81b1d548d00bcd028303c4f3150fa753b9b8aa71 upstream. The former patch "defer 6pack kfree after unregister_netdev" reorders the kfree of two buffer after the unregister_netdev to prevent the race condition. It also adds free_netdev() function in sixpack_close(), which is a direct copy from the similar code in mkiss_close(). However, in sixpack driver, the flag needs_free_netdev is set to true in sp_setup(), hence the unregister_netdev() will free the netdev automatically. Therefore, as the sp is netdev_priv, use-after-free occurs. This patch removes the needs_free_netdev = true and just let the free_netdev to finish this deallocation task. Fixes: 0b9111922b1f ("hamradio: defer 6pack kfree after unregister_netdev") Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20211111141402.7551-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09hamradio: defer 6pack kfree after unregister_netdevLin Ma
commit 0b9111922b1f399aba6ed1e1b8f2079c3da1aed8 upstream. There is a possible race condition (use-after-free) like below (USE) | (FREE) dev_queue_xmit | __dev_queue_xmit | __dev_xmit_skb | sch_direct_xmit | ... xmit_one | netdev_start_xmit | tty_ldisc_kill __netdev_start_xmit | 6pack_close sp_xmit | kfree sp_encaps | | According to the patch "defer ax25 kfree after unregister_netdev", this patch reorder the kfree after the unregister_netdev to avoid the possible UAF as the unregister_netdev() is well synchronized and won't return if there is a running routine. Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27Revert "net: micrel: fix KS8851_MLL Kconfig"Marek Vasut
This reverts commit 4cd3c9e070d6a9a9dc76a5ffa79114953bf69087 which is commit c3efcedd272aa6dd5929e20cf902a52ddaa1197a upstream. The upstream commit c3efcedd272a ("net: micrel: fix KS8851_MLL Kconfig") depends on e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") which is not part of Linux 5.4.y . Revert the aforementioned commit to prevent breakage in 5.4.y . Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27e1000e: Fix possible overflow in LTR decodingSasha Neftin
commit 04ebaa1cfddae5f240cc7404f009133bb0389a47 upstream. When we decode the latency and the max_latency, u16 value may not fit the required size and could lead to the wrong LTR representation. Scaling is represented as: scale 0 - 1 (2^(5*0)) = 2^0 scale 1 - 32 (2^(5 *1))= 2^5 scale 2 - 1024 (2^(5 *2)) =2^10 scale 3 - 32768 (2^(5 *3)) =2^15 scale 4 - 1048576 (2^(5 *4)) = 2^20 scale 5 - 33554432 (2^(5 *4)) = 2^25 scale 4 and scale 5 required 20 and 25 bits respectively. scale 6 reserved. Replace the u16 type with the u32 type and allow corrected LTR representation. Cc: stable@vger.kernel.org Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M") Reported-by: James Hutchinson <jahutchinson99@googlemail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689 Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Tested-by: James Hutchinson <jahutchinson99@googlemail.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27net: macb: Restart tx only if queue pointer is laggingTomas Melin
[ Upstream commit 5ad7f18cd82cee8e773d40cc7a1465a526f2615c ] commit 4298388574da ("net: macb: restart tx after tx used bit read") added support for restarting transmission. Restarting tx does not work in case controller asserts TXUBR interrupt and TQBP is already at the end of the tx queue. In that situation, restarting tx will immediately cause assertion of another TXUBR interrupt. The driver will end up in an infinite interrupt loop which it cannot break out of. For cases where TQBP is at the end of the tx queue, instead only clear TX_USED interrupt. As more data gets pushed to the queue, transmission will resume. This issue was observed on a Xilinx Zynq-7000 based board. During stress test of the network interface, driver would get stuck on interrupt loop within seconds or minutes causing CPU to stall. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220407161659.14532-1-tomas.melin@vaisala.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27dpaa_eth: Fix missing of_node_put in dpaa_get_ts_info()Lv Ruyi
[ Upstream commit 1a7eb80d170c28be2928433702256fe2a0bd1e0f ] Both of of_get_parent() and of_parse_phandle() return node pointer with refcount incremented, use of_node_put() on it to decrease refcount when done. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27brcmfmac: sdio: Fix undefined behavior due to shift overflowing the constantBorislav Petkov
[ Upstream commit 6fb3a5868b2117611f41e421e10e6a8c2a13039a ] Fix: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17): ^~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13): ^~~~ See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: brcm80211-dev-list.pdl@broadcom.com Cc: netdev@vger.kernel.org Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/Ykx0iRlvtBnKqtbG@zn.tnic Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27mt76: Fix undefined behavior due to shift overflowing the constantBorislav Petkov
[ Upstream commit dbc2b1764734857d68425468ffa8486e97ab89df ] Fix: drivers/net/wireless/mediatek/mt76/mt76x2/pci.c: In function ‘mt76x2e_probe’: ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_946’ \ declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Shayne Chen <shayne.chen@mediatek.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220405151517.29753-9-bp@alien8.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27vxlan: fix error return code in vxlan_fdb_appendHongbin Wang
[ Upstream commit 7cea5560bf656b84f9ed01c0cc829d4eecd0640b ] When kmalloc and dst_cache_init failed, should return ENOMEM rather than ENOBUFS. Signed-off-by: Hongbin Wang <wh_bin@126.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27igc: Fix BUG: scheduling while atomicSasha Neftin
[ Upstream commit c80a29f0fe9b6f5457e0788e27d1110577eba99b ] Replace usleep_range() method with udelay() method to allow atomic contexts in low-level MDIO access functions. The following issue can be seen by doing the following: $ modprobe -r bonding $ modprobe -v bonding max_bonds=1 mode=1 miimon=100 use_carrier=0 $ ip link set bond0 up $ ifenslave bond0 eth0 eth1 [ 982.357308] BUG: scheduling while atomic: kworker/u64:0/9/0x00000002 [ 982.364431] INFO: lockdep is turned off. [ 982.368824] Modules linked in: bonding sctp ip6_udp_tunnel udp_tunnel mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core nfp tls sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support mxm_wmi dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate intel_uncore pcspkr lpc_ich mei_me ipmi_ssif mei ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci crc32c_intel libata i2c_algo_bit tg3 megaraid_sas igc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: bonding] [ 982.437941] CPU: 25 PID: 9 Comm: kworker/u64:0 Kdump: loaded Tainted: G W --------- - - 4.18.0-348.el8.x86_64+debug #1 [ 982.451333] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 2.7.0 12/005/2017 [ 982.459791] Workqueue: bond0 bond_mii_monitor [bonding] [ 982.465622] Call Trace: [ 982.468355] dump_stack+0x8e/0xd0 [ 982.472056] __schedule_bug.cold.60+0x3a/0x60 [ 982.476919] __schedule+0x147b/0x1bc0 [ 982.481007] ? firmware_map_remove+0x16b/0x16b [ 982.485967] ? hrtimer_fixup_init+0x40/0x40 [ 982.490625] schedule+0xd9/0x250 [ 982.494227] schedule_hrtimeout_range_clock+0x10d/0x2c0 [ 982.500058] ? hrtimer_nanosleep_restart+0x130/0x130 [ 982.505598] ? hrtimer_init_sleeper_on_stack+0x90/0x90 [ 982.511332] ? usleep_range+0x88/0x130 [ 982.515514] ? recalibrate_cpu_khz+0x10/0x10 [ 982.520279] ? ktime_get+0xab/0x1c0 [ 982.524175] ? usleep_range+0x88/0x130 [ 982.528355] usleep_range+0xdd/0x130 [ 982.532344] ? console_conditional_schedule+0x30/0x30 [ 982.537987] ? igc_put_hw_semaphore+0x17/0x60 [igc] [ 982.543432] igc_read_phy_reg_gpy+0x111/0x2b0 [igc] [ 982.548887] igc_phy_has_link+0xfa/0x260 [igc] [ 982.553847] ? igc_get_phy_id+0x210/0x210 [igc] [ 982.558894] ? lock_acquire+0x34d/0x890 [ 982.563187] ? lock_downgrade+0x710/0x710 [ 982.567659] ? rcu_read_unlock+0x50/0x50 [ 982.572039] igc_check_for_copper_link+0x106/0x210 [igc] [ 982.577970] ? igc_config_fc_after_link_up+0x840/0x840 [igc] [ 982.584286] ? rcu_read_unlock+0x50/0x50 [ 982.588661] ? lock_release+0x591/0xb80 [ 982.592939] ? lock_release+0x591/0xb80 [ 982.597220] igc_has_link+0x113/0x330 [igc] [ 982.601887] ? lock_downgrade+0x710/0x710 [ 982.606362] igc_ethtool_get_link+0x6d/0x90 [igc] [ 982.611614] bond_check_dev_link+0x131/0x2c0 [bonding] [ 982.617350] ? bond_time_in_interval+0xd0/0xd0 [bonding] [ 982.623277] ? rcu_read_lock_held+0x62/0xc0 [ 982.627944] ? rcu_read_lock_sched_held+0xe0/0xe0 [ 982.633198] bond_mii_monitor+0x314/0x2500 [bonding] [ 982.638738] ? lock_contended+0x880/0x880 [ 982.643214] ? bond_miimon_link_change+0xa0/0xa0 [bonding] [ 982.649336] ? lock_acquire+0x34d/0x890 [ 982.653615] ? lock_downgrade+0x710/0x710 [ 982.658089] ? debug_object_deactivate+0x221/0x340 [ 982.663436] ? rcu_read_unlock+0x50/0x50 [ 982.667811] ? debug_print_object+0x2b0/0x2b0 [ 982.672672] ? __switch_to_asm+0x41/0x70 [ 982.677049] ? __switch_to_asm+0x35/0x70 [ 982.681426] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.686288] ? trace_hardirqs_on+0x20/0x195 [ 982.690956] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.695818] process_one_work+0x8f0/0x1770 [ 982.700390] ? pwq_dec_nr_in_flight+0x320/0x320 [ 982.705443] ? debug_show_held_locks+0x50/0x50 [ 982.710403] worker_thread+0x87/0xb40 [ 982.714489] ? process_one_work+0x1770/0x1770 [ 982.719349] kthread+0x344/0x410 [ 982.722950] ? kthread_insert_work_sanity_check+0xd0/0xd0 [ 982.728975] ret_from_fork+0x3a/0x50 Fixes: 5586838fe9ce ("igc: Add code for PHY support") Reported-by: Corinna Vinschen <vinschen@redhat.com> Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Corinna Vinschen <vinschen@redhat.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27igc: Fix infinite loop in release_swfw_syncSasha Neftin
[ Upstream commit 907862e9aef75bf89e2b265efcc58870be06081e ] An infinite loop may occur if we fail to acquire the HW semaphore, which is needed for resource release. This will typically happen if the hardware is surprise-removed. At this stage there is nothing to do, except log an error and quit. Fixes: c0071c7aa5fe ("igc: Add HW initialization code") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error pathHangyu Hua
commit 3d3925ff6433f98992685a9679613a2cc97f3ce2 upstream. There is no need to call dev_kfree_skb() when usb_submit_urb() fails because can_put_echo_skb() deletes original skb and can_free_echo_skb() deletes the cloned skb. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/all/20220311080614.45229-1-hbh25y@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> [DP: adjusted params of can_free_echo_skb() for 5.4 stable] Signed-off-by: Dragos-Marian Panait <dragos.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ath9k: Fix usage of driver-private space in tx_infoToke Høiland-Jørgensen
commit 5a6b06f5927c940fa44026695779c30b7536474c upstream. The ieee80211_tx_info_clear_status() helper also clears the rate counts and the driver-private part of struct ieee80211_tx_info, so using it breaks quite a few other things. So back out of using it, and instead define a ath-internal helper that only clears the area between the status_driver_data and the rates info. Combined with moving the ath_frame_info struct to status_driver_data, this avoids clearing anything we shouldn't be, and so we can keep the existing code for handling the rate information. While fixing this I also noticed that the setting of tx_info->status.rates[tx_rateindex].count on hardware underrun errors was always immediately overridden by the normal setting of the same fields, so rearrange the code so that the underrun detection actually takes effect. The new helper could be generalised to a 'memset_between()' helper, but leave it as a driver-internal helper for now since this needs to go to stable. Cc: stable@vger.kernel.org Reported-by: Peter Seiderer <ps.report@gmx.net> Fixes: 037250f0a45c ("ath9k: Properly clear TX status area before reporting to mac80211") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Peter Seiderer <ps.report@gmx.net> Tested-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220404204800.2681133-1-toke@toke.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ath9k: Properly clear TX status area before reporting to mac80211Toke Høiland-Jørgensen
commit 037250f0a45cf9ecf5b52d4b9ff8eadeb609c800 upstream. The ath9k driver was not properly clearing the status area in the ieee80211_tx_info struct before reporting TX status to mac80211. Instead, it was manually filling in fields, which meant that fields introduced later were left as-is. Conveniently, mac80211 actually provides a helper to zero out the status area, so use that to make sure we zero everything. The last commit touching the driver function writing the status information seems to have actually been fixing an issue that was also caused by the area being uninitialised; but it only added clearing of a single field instead of the whole struct. That is now redundant, though, so revert that commit and use it as a convenient Fixes tag. Fixes: cc591d77aba1 ("ath9k: Make sure to zero status.tx_time before reporting TX status") Reported-by: Bagas Sanjaya <bagasdotme@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220330164409.16645-1-toke@toke.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20drivers: net: slip: fix NPD bug in sl_tx_timeout()Duoming Zhou
[ Upstream commit ec4eb8a86ade4d22633e1da2a7d85a846b7d1798 ] When a slip driver is detaching, the slip_close() will act to cleanup necessary resources and sl->tty is set to NULL in slip_close(). Meanwhile, the packet we transmit is blocked, sl_tx_timeout() will be called. Although slip_close() and sl_tx_timeout() use sl->lock to synchronize, we don`t judge whether sl->tty equals to NULL in sl_tx_timeout() and the null pointer dereference bug will happen. (Thread 1) | (Thread 2) | slip_close() | spin_lock_bh(&sl->lock) | ... ... | sl->tty = NULL //(1) sl_tx_timeout() | spin_unlock_bh(&sl->lock) spin_lock(&sl->lock); | ... | ... tty_chars_in_buffer(sl->tty)| if (tty->ops->..) //(2) | ... | synchronize_rcu() We set NULL to sl->tty in position (1) and dereference sl->tty in position (2). This patch adds check in sl_tx_timeout(). If sl->tty equals to NULL, sl_tx_timeout() will goto out. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20220405132206.55291-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20net: usb: aqc111: Fix out-of-bounds accesses in RX fixupMarcin Kozlowski
[ Upstream commit afb8e246527536848b9b4025b40e613edf776a9d ] aqc111_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. Found doing variant analysis. Tested it with another driver (ax88179_178a), since I don't have a aqc111 device to test it, but the code looks very similar. Signed-off-by: Marcin Kozlowski <marcinguy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20net: micrel: fix KS8851_MLL KconfigRandy Dunlap
[ Upstream commit c3efcedd272aa6dd5929e20cf902a52ddaa1197a ] KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL, so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since 'select' does not follow any dependency chains. Fixes kconfig warning and build errors: WARNING: unmet direct dependencies detected for MICREL_PHY Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y] ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info': micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index' ld: drivers/net/phy/micrel.o: in function `lan8814_probe': micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-linkDinh Nguyen
[ Upstream commit a6aaa00324240967272b451bfa772547bd576ee6 ] When using a fixed-link, the altr_tse_pcs driver crashes due to null-pointer dereference as no phy_device is provided to tse_pcs_fix_mac_speed function. Fix this by adding a check for phy_dev before calling the tse_pcs_fix_mac_speed() function. Also clean up the tse_pcs_fix_mac_speed function a bit. There is no need to check for splitter_base and sgmii_adapter_base because the driver will fail if these 2 variables are not derived from the device tree. Fixes: fb3bbdb85989 ("net: ethernet: Add TSE PCS support to dwmac-socfpga") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20mlxsw: i2c: Fix initialization error flowVadim Pasternak
[ Upstream commit d452088cdfd5a4ad9d96d847d2273fe958d6339b ] Add mutex_destroy() call in driver initialization error flow. Fixes: 6882b0aee180f ("mlxsw: Introduce support for I2C bus") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220407070703.2421076-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20veth: Ensure eth header is in skb's linear partGuillaume Nault
[ Upstream commit 726e2c5929de841fdcef4e2bf995680688ae1b87 ] After feeding a decapsulated packet to a veth device with act_mirred, skb_headlen() may be 0. But veth_xmit() calls __dev_forward_skb(), which expects at least ETH_HLEN byte of linear data (as __dev_forward_skb2() calls eth_type_trans(), which pulls ETH_HLEN bytes unconditionally). Use pskb_may_pull() to ensure veth_xmit() respects this constraint. kernel BUG at include/linux/skbuff.h:2328! RIP: 0010:eth_type_trans+0xcf/0x140 Call Trace: <IRQ> __dev_forward_skb2+0xe3/0x160 veth_xmit+0x6e/0x250 [veth] dev_hard_start_xmit+0xc7/0x200 __dev_queue_xmit+0x47f/0x520 ? skb_ensure_writable+0x85/0xa0 ? skb_mpls_pop+0x98/0x1c0 tcf_mirred_act+0x442/0x47e [act_mirred] tcf_action_exec+0x86/0x140 fl_classify+0x1d8/0x1e0 [cls_flower] ? dma_pte_clear_level+0x129/0x1a0 ? dma_pte_clear_level+0x129/0x1a0 ? prb_fill_curr_block+0x2f/0xc0 ? skb_copy_bits+0x11a/0x220 __tcf_classify+0x58/0x110 tcf_classify_ingress+0x6b/0x140 __netif_receive_skb_core.constprop.0+0x47d/0xfd0 ? __iommu_dma_unmap_swiotlb+0x44/0x90 __netif_receive_skb_one_core+0x3d/0xa0 netif_receive_skb+0x116/0x170 be_process_rx+0x22f/0x330 [be2net] be_poll+0x13c/0x370 [be2net] __napi_poll+0x2a/0x170 net_rx_action+0x22f/0x2f0 __do_softirq+0xca/0x2a8 __irq_exit_rcu+0xc1/0xe0 common_interrupt+0x83/0xa0 Fixes: e314dbdc1c0d ("[NET]: Virtual ethernet device driver.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15qede: confirm skb is allocated before usingJamie Bainbridge
[ Upstream commit 4e910dbe36508654a896d5735b318c0b88172570 ] qede_build_skb() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. This results in a kernel panic because the skb to reserve is NULL. Add a check in case build_skb() failed to allocate and return NULL. The NULL return is handled correctly in callers to qede_build_skb(). Fixes: 8a8633978b842 ("qede: Add build_skb() support.") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15dpaa2-ptp: Fix refcount leak in dpaa2_ptp_probeMiaoqian Lin
[ Upstream commit 2b04bd4f03bba021959ca339314f6739710f0954 ] This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak. Fixes: d346c9e86d86 ("dpaa2-ptp: reuse ptp_qoriq driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220404125336.13427-1-linmq006@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15bnxt_en: reserve space inside receive page for skb_shared_infoAndy Gospodarek
[ Upstream commit facc173cf700e55b2ad249ecbd3a7537f7315691 ] Insufficient space was being reserved in the page used for packet reception, so the interface MTU could be set too large to still have room for the contents of the packet when doing XDP redirect. This resulted in the following message when redirecting a packet between 3520 and 3822 bytes with an MTU of 3822: [311815.561880] XDP_WARN: xdp_update_frame_from_buff(line:200): Driver BUG: missing reserved tailroom Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15net: stmmac: Fix unset max_speed difference between DT and non-DT platformsChen-Yu Tsai
[ Upstream commit c21cabb0fd0b54b8b54235fc1ecfe1195a23bcb2 ] In commit 9cbadf094d9d ("net: stmmac: support max-speed device tree property"), when DT platforms don't set "max-speed", max_speed is set to -1; for non-DT platforms, it stays the default 0. Prior to commit eeef2f6b9f6e ("net: stmmac: Start adding phylink support"), the check for a valid max_speed setting was to check if it was greater than zero. This commit got it right, but subsequent patches just checked for non-zero, which is incorrect for DT platforms. In commit 92c3807b9ac3 ("net: stmmac: convert to phylink_get_linkmodes()") the conversion switched completely to checking for non-zero value as a valid value, which caused 1000base-T to stop getting advertised by default. Instead of trying to fix all the checks, simply leave max_speed alone if DT property parsing fails. Fixes: 9cbadf094d9d ("net: stmmac: support max-speed device tree property") Fixes: 92c3807b9ac3 ("net: stmmac: convert to phylink_get_linkmodes()") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220331184832.16316-1-wens@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15bnxt_en: Eliminate unintended link toggle during FW resetMichael Chan
[ Upstream commit 7c492a2530c1f05441da541307c2534230dfd59b ] If the flow control settings have been changed, a subsequent FW reset may cause the ethernet link to toggle unnecessarily. This link toggle will increase the down time by a few seconds. The problem is caused by bnxt_update_phy_setting() detecting a false mismatch in the flow control settings between the stored software settings and the current FW settings after the FW reset. This mismatch is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an inconsistent way in bnxt_set_pauseparam() in autoneg mode. The AUTONEG bit should not be added to link_info->req_flow_ctrl. Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15tuntap: add sanity checks about msg_controllen in sendmsgHarold Huang
[ Upstream commit 74a335a07a17d131b9263bfdbdcb5e40673ca9ca ] In patch [1], tun_msg_ctl was added to allow pass batched xdp buffers to tun_sendmsg. Although we donot use msg_controllen in this path, we should check msg_controllen to make sure the caller pass a valid msg_ctl. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fe8dd45bb7556246c6b76277b1ba4296c91c2505 Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Harold Huang <baymaxhuang@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220303022441.383865-1-baymaxhuang@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15macvtap: advertise link netns via netlinkSven Eckelmann
[ Upstream commit a02192151b7dbf855084c38dca380d77c7658353 ] Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. This fixes iproute2 which otherwise resolved the link interface to an interface in the wrong namespace. Test commands: ip netns add nst ip link add dummy0 type dummy ip link add link macvtap0 link dummy0 type macvtap ip link set macvtap0 netns nst ip -netns nst link show macvtap0 Before: 10: macvtap0@gre0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500 link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff After: 10: macvtap0@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500 link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff link-netnsid 0 Reported-by: Leonardo Mörlein <freifunk@irrelefant.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20220228003240.1337426-1-sven@narfation.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111Zekun Shen
[ Upstream commit 564d4eceb97eaf381dd6ef6470b06377bb50c95a ] The bug was found during fuzzing. Stacktrace locates it in ath5k_eeprom_convert_pcal_info_5111. When none of the curve is selected in the loop, idx can go up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound. pd = &chinfo[pier].pd_curves[idx]; There are many OOB writes using pd later in the code. So I added a sanity check for idx. Checks for other loops involving AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not used outside the loops. The patch is NOT tested with real device. The following is the fuzzing report BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] Write of size 1 at addr ffff8880174a4d60 by task modprobe/214 CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] __kasan_report.cold+0x37/0x7c ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] kasan_report+0xe/0x20 ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k] ath5k_eeprom_init+0x2513/0x6290 [ath5k] ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? usleep_range+0xb8/0x100 ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k] ath5k_hw_init+0xb60/0x1970 [ath5k] ath5k_init_ah+0x6fe/0x2530 [ath5k] ? kasprintf+0xa6/0xe0 ? ath5k_stop+0x140/0x140 [ath5k] ? _dev_notice+0xf6/0xf6 ? apic_timer_interrupt+0xa/0x20 ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k] ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] ? mutex_lock+0x89/0xd0 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] local_pci_probe+0xd3/0x160 pci_device_probe+0x23f/0x3e0 ? pci_device_remove+0x280/0x280 ? pci_device_remove+0x280/0x280 really_probe+0x209/0x5d0 Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu> Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/YckvDdj3mtCkDRIt@a-10-27-26-18.dynapool.vpn.nyu.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardwareGuangbin Huang
commit 7ed258f12ec5ce855f15cdfb5710361dc82fe899 upstream. When user delete vlan 0, as driver will not delete vlan 0 for hardware in function hclge_set_vlan_filter_hw(), so vlan 0 in software vlan talbe should not be deleted. Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15can: mcba_usb: properly check endpoint typePavel Skripkin
commit 136bed0bfd3bc9c95c88aafff2d22ecb3a919f23 upstream. Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. We should check that in endpoint is actually present to prevent this warning. Found pipes are now saved to struct mcba_priv and code uses them directly instead of making pipes in place. Fail log: | usb 5-1: BOGUS urb xfer, pipe 3 != type 1 | WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 | Modules linked in: | CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0 | Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 | Workqueue: usb_hub_wq hub_event | RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 | ... | Call Trace: | <TASK> | mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline] | mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858 | usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 | call_driver_probe drivers/base/dd.c:517 [inline] Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/all/20220313100903.10868-1-paskripkin@gmail.com Reported-and-tested-by: syzbot+3bc1dce0cc0052d60fde@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-11 01:36:45 +0000