summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2012-03-16wimax/i2400m: fix erroneous NETDEV_TX_BUSY useEric Dumazet
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Also increments tx_dropped counter Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16net/hyperv: fix erroneous NETDEV_TX_BUSY useEric Dumazet
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. This is mostly a revert of commit bf769375c (staging: hv: fix the return status of netvsc_start_xmit()) In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16net/usbnet: reserve headroom on rx skbsEric Dumazet
network drivers should reserve some headroom on incoming skbs so that we dont need expensive reallocations, eg forwarding packets in tunnels. This NET_SKB_PAD padding is done in various helpers, like __netdev_alloc_skb_ip_align() in this patch, combining NET_SKB_PAD and NET_IP_ALIGN magic. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16bnx2x: fix memory leak in bnx2x_init_firmware()Michal Schmidt
When cycling the interface down and up, bnx2x_init_firmware() knows that the firmware is already loaded, but nevertheless it allocates certain arrays anew (init_data, init_ops, init_ops_offsets, iro_arr). The old arrays are leaked. Fix the leaks by returning early if the firmware was already loaded. Because if the firmware is loaded, so are the arrays. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16bnx2x: fix a crash on corrupt firmware fileMichal Schmidt
If the requested firmware is deemed corrupt and then released, reset the pointer to NULL in order to avoid double-freeing it in bnx2x_release_firmware() or dereferencing it in bnx2x_init_firmware(). Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-03-12tun: don't hold network namespace by tun socketsStanislav Kinsbursky
v3: added previously removed sock_put() to the tun_release() callback, because sk_release_kernel() doesn't drop the socket reference. v2: sk_release_kernel() used for socket release. Dummy tun_release() is required for sk_release_kernel() ---> sock_release() ---> sock->ops->release() call. TUN was designed to destroy it's socket on network namesapce shutdown. But this will never happen for persistent device, because it's socket holds network namespace. This patch removes of holding network namespace by TUN socket and replaces it by creating socket in init_net and then changing it's net it to desired one. On shutdown socket is moved back to init_net prior to final put. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: FCoE statistics id fixedYuval Mintz
FCoE statistics ids were distinguished from the L2's statistics ids. However, not all of the change was committed. This causes a possible collision of indices when FCoE is present. This patch fixes the issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: dcb bit indices flags used as bitsYuval Mintz
DCB flags were updated using the flags' bit offsets instead of the actual bits. This is now fixed. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: added cpu_to_le16 when preparing ramrod's dataAriel Elior
Fixed endianess issue when passing arguments to FW. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: pfc statistics counts pfc events twiceYuval Mintz
When pfc statistics were counted, the delta change from last count was summed twice. This fixes the issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12rt2x00: fix random stallsStanislaw Gruszka
Is possible that we stop queue and then do not wake up it again, especially when packets are transmitted fast. That can be easily reproduced with modified tx queue entry_num to some small value e.g. 16. If mac80211 already hold local->queue_stop_reason_lock, then we can wait on that lock in both rt2x00queue_pause_queue() and rt2x00queue_unpause_queue(). After drooping ->queue_stop_reason_lock is possible that __ieee80211_wake_queue() will be performed before __ieee80211_stop_queue(), hence we stop queue and newer wake up it again. Another race condition is possible when between rt2x00queue_threshold() check and rt2x00queue_pause_queue() we will process all pending tx buffers on different cpu. This might happen if for example interrupt will be triggered on cpu performing rt2x00mac_tx(). To prevent race conditions serialize pause/unpause by queue->tx_lock. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12iwl3945: fix possible il->txq NULL pointer dereference in delayed worksStanislaw Gruszka
On il3945_down procedure we free tx queue data and nullify il->txq pointer. After that we drop mutex and then cancel delayed works. There is possibility, that after drooping mutex and before the cancel, some delayed work will start and crash while trying to send commands to the device. For example, here is reported crash in il3945_bg_reg_txpower_periodic(): https://bugzilla.kernel.org/show_bug.cgi?id=42766#c10 Patch fix problem by adding il->txq check on works that send commands, hence utilize tx queue. Reported-by: Clemens Eisserer <linuxhippy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-11usb: asix: Patch for Sitecom LN-031Joerg Neikes
This patch adds support for the Sitecom LN-031 USB adapter with a AX88178 chip. Added USB id to find correct driver for AX88178 1000 Ethernet adapter. Signed-off-by: Joerg Neikes <j.neikes@midlandgate.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08net/hyperv: Use the built-in macro KBUILD_MODNAME for this driverHaiyang Zhang
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: Olaf Hering <olaf@aepfle.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08net/usbnet: avoid recursive locking in usbnet_stop()Sebastian Siewior
|kernel BUG at kernel/rtmutex.c:724! |[<c029599c>] (rt_spin_lock_slowlock+0x108/0x2bc) from [<c01c2330>] (defer_bh+0x1c/0xb4) |[<c01c2330>] (defer_bh+0x1c/0xb4) from [<c01c3afc>] (rx_complete+0x14c/0x194) |[<c01c3afc>] (rx_complete+0x14c/0x194) from [<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) |[<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) from [<c01e1ff4>] (musb_giveback+0x34/0x40) |[<c01e1ff4>] (musb_giveback+0x34/0x40) from [<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) |[<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) from [<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) |[<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) from [<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) |[<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) from [<c01cbb90>] (unlink1+0xbc/0xcc) |[<c01cbb90>] (unlink1+0xbc/0xcc) from [<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) |[<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) from [<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) |[<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) from [<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) |[<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) from [<c01c2d68>] (usbnet_stop+0x100/0x15c) |[<c01c2d68>] (usbnet_stop+0x100/0x15c) from [<c020f718>] (__dev_close_many+0x94/0xc8) defer_bh() takes the lock which is hold during unlink_urbs(). The safe walk suggest that the skb will be removed from the list and this is done by defer_bh() so it seems to be okay to drop the lock here. Cc: stable@kernel.org Reported-by: Aníbal Almeida Pinto <anibal.pinto@efacec.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08mlx4_core: fix bug in modify_cq wrapper for resize flow.Jack Morgenstein
The actual FW command is called in procedure "handle_resize". Code incorrectly invoked the FW command again (in good flow), in the modify_cq wrapper function. Fix by skipping second FW invocation unconditionally for resize. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08atl1c: set ATL1C_WORK_EVENT_RESET bit correctlyDan Carpenter
ATL1C_WORK_EVENT_RESET is zero so the original code here is a nop. The intent was to set the zero bit. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08ehea: restore multicast and rx_errors fieldsEric Dumazet
Commit 239c562c94d (ehea: Add 64bit statistics) added a regression, since we no longer report multicast & rx_errors fields, taken from port->stats structure. These fields are updated in ehea_update_stats() every second. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-03-06caif-hsi: Set default MTU to 4096Sjur Brændeland
Default MTU for CAIF HSI was wrongly set to 15 * 4092 bytes. The patch sets default MTU size to 4096. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-06cxgb4vf: Add support for Chelsio's T480-CR and T440-LP-CR adaptersVipul Pandya
This patch adds PCI device ids for Chelsio's T480-CR and T440-LP-CR adapters. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-06cxgb4: Add support for Chelsio's T480-CR and T440-LP-CR adaptersVipul Pandya
This patch adds PCI device ids for Chelsio's T480-CR and T440-LP-CR adapters. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-06mlx4_core: remove buggy sched_queue maskingYevgeny Petrilin
Fixes a bug introduced by commit fe9a2603c, where the priority bits in the schedule queue field were masked out. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-06r8169: runtime resume before shutdown.françois romieu
With runtime PM, if the ethernet cable is disconnected, the device is transitioned to D3 state to conserve energy. If the system is shutdown in this state, any register accesses in rtl_shutdown are dropped on the floor. As the device was programmed by .runtime_suspend() to wake on link changes, it is thus brought back up as soon as the link recovers. Resuming every suspended device through the driver core would slow things down and it is not clear how many devices really need it now. Original report and D0 transition patch by Sameer Nanda. Patch has been changed to comply with advices by Rafael J. Wysocki and the PM folks. Reported-by: Sameer Nanda <snanda@chromium.org> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Hayes Wang <hayeswang@realtek.com> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-03-06tg3: Fix to use multi queue BQL interfacesTom Herbert
Fix tg3 to use BQL multi queue related netdev interfaces since the device supports multi queue. Signed-off-by: Tom Herbert <therbert@google.com> Reported-by: Christoph Lameter <cl@gentwo.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-05qla3xxx: ethernet: Fix bogus interrupt state flag.Santosh Nayak
In 'ql_adapter_initialize' the first call for 'spin_unlock_irqrestore()' is with hw_flags = 0, which is as good as 'spin_unlock_irq()' (unconditional interrupt enabling). If this is intended, then for better performance 'spin_unlock_irqrestore()' can be replaced with 'spin_unlock_irq()' and 'spin_lock_irqsave()' can be replaced by 'spin_lock_irq() Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-05iwlwifi: fix wowlan suspendJohannes Berg
This was broken by the commit 023ca58f1 "iwlwifi: Move the core suspend function to iwl-agn-lib" where for some reason the code changed while moving, from .len[0] = sizeof(*key_data.rsc_tsc), to .len[0] = sizeof(key_data.rsc_tsc), Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-02r8169: corrupted IP fragments fix for large mtu.françois romieu
Noticed with the 8168d (-vb-gr, aka RTL_GIGA_MAC_VER_26). ConfigX registers should only be written while the Config9346 lock is held. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Reported-by: Nick Bowler <nbowler@elliptictech.com> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-02packetengines: fix config defaultstephen hemminger
As part of the big network driver reorg, each vendor directory defaults to yes, so that older config's can migrate correctly. Looks like this one got missed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-01vmxnet3: Fix transport header sizeShreyas Bhatewara
Fix transport header size Fix the transpoert header size for UDP packets. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-01enic: fix an endian bug in enic_probe()Dan Carpenter
"num_vfs" is a u32 but we only use the high 16 bits and the low 16bits are left as zero. That isn't a problem for little endian systems but it will break on big endian ones. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-01pch_gbe: memory corruption calling pch_gbe_validate_option()Dan Carpenter
pch_gbe_validate_option() modifies 32 bits of memory but we pass &hw->phy.autoneg_advertised which only has 16 bits and &hw->mac.fc which only has 8 bits. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-29tg3: Fix tg3_get_stats64 for 5700 / 5701 devsMatt Carlson
tg3_get_stats64() takes tp->lock when dealing with non-serdes bcm5700 and bcm5701 devices. However, functions that call tg3_halt() have already acquired tp->lock. When tg3_get_stats64() is called in tg3_halt(), deadlock will occur. This patch fixes the problem by separating the stat gathering code into a new tg3_get_nstats() function. tg3_get_stats64() is recoded to call this function and take tp->lock. The code that takes tp->lock in tg3_calc_crc_errors() has been removed. Function signatures have been cleaned up too. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-29mwifiex: reset encryption mode flag before associationAmitkumar Karwar
Recent commit "mwifiex: clear previous security setting during association" fixes association failure problems observed in some corner cases by clearing previous security setting before each association. We should reset encryption mode flag as well. This patch takes care of it. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29carl9170: fix frame delivery if sta is in powersave modeChristian Lamparter
Nicolas Cavallari discovered that carl9170 has some serious problems delivering data to sleeping stations. It turns out that the driver was not honoring two important flags (IEEE80211_TX_CTL_POLL_RESPONSE and IEEE80211_TX_CTL_CLEAR_PS_FILT) which are set on frames that should be sent although the receiving station is still in powersave mode. Cc: stable <stable@vger.kernel.org> Reported-by: Nicolas Cavallari <Nicolas.Cavallari@lri.fr> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29carl9170: Fix memory accounting when sta is in power-save mode.Nicolas Cavallari
On Access Point mode, when transmitting a packet, if the destination station is in powersave mode, we abort transmitting the packet to the device queue, but we do not reclaim the allocated memory. Given enough packets, we can go in a state where there is no packet on the device queue, but we think the device has no memory left, so no packet gets transmitted, connections breaks and the AP stops working. This undo the allocation done in the TX path when the station is in power-save mode. Signed-off-by: Nicolas Cavallari <cavallar@lri.fr> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
1) ICMP sockets leave err uninitialized but we try to return it for the unsupported MSG_OOB case, reported by Dave Jones. 2) Add new Zaurus device ID entries, from Dave Jones. 3) Pointer calculation in hso driver memset is wrong, from Dan Carpenter. 4) ks8851_probe() checks unsigned value as negative, fix also from Dan Carpenter. 5) Fix crashes in atl1c driver due to TX queue handling, from Eric Dumazet. I anticipate some TX side locking fixes coming in the near future for this driver as well. 6) The inline directive fix in Bluetooth which was breaking the build only with very new versions of GCC, from Johan Hedberg. 7) Fix crashes in the ATP CLIP code due to ARP cleanups this merge window, reported by Meelis Roos and fixed by Eric Dumazet. 8) JME driver doesn't flush RX FIFO correctly, from Guo-Fu Tseng. 9) Some ip6_route_output() callers test the return value for NULL, but this never happens as the convention is to return a dst entry with dst->error set. Fixes from RonQing Li. 10) Logitech Harmony 900 should be handled by zaurus driver not cdc_ether, update white lists and black lists accordingly. From Scott Talbert. 11) Receiving from certain kinds of devices there won't be a MAC header, so there is no MAC header to fixup in the IPSEC code, and if we try to do it we'll crash. Fix from Eric Dumazet. 12) Port type array indexing off-by-one in mlx4 driver, fix from Yevgeny Petrilin. 13) Fix regression in link-down handling in davinci_emac which causes all RX descriptors to be freed up and therefore RX to wedge completely, from Christian Riesch. 14) It took two attempts, but ctnetlink soft lockups seem to be cured now, from Pablo Neira Ayuso. 15) Endianness bug fix in ENIC driver, from Santosh Nayak. 16) The long ago conversion of the PPP fragmentation code over to abstracted SKB list handling wasn't perfect, once we get an out of sequence SKB we don't flush the rest of them like we should. From Ben McKeegan. 17) Fix regression of ->ip_summed initialization in sfc driver. From Ben Hutchings. 18) Bluetooth timeout mistakenly using msecs instead of jiffies, from Andrzej Kaczmarek. 19) Using _sync variant of work cancellation results in deadlocks, use the non _sync variants instead. From Andre Guedes. 20) Bluetooth rfcomm code had reference counting problems leading to crashes, fix from Octavian Purdila. 21) The conversion of netem over to classful qdisc handling added two bugs to netem_dequeue(), fixes from Eric Dumazet. 22) Missing pci_iounmap() in ATM Solos driver. Fix from Julia Lawall. 23) b44_pci_exit() should not have __exit tag since it's invoked from non-__exit code. From Nikola Pajkovsky. 24) The conversion of the neighbour hash tables over to RCU added a race, fixed here by adding the necessary reread of tbl->nht, fix from Michel Machado. 25) When we added VF (virtual function) attributes for network device dumps, this potentially bloats up the size of the dump of one network device such that the dump size is too large for the buffer allocated by properly written netlink applications. In particular, if you add 255 VFs to a network device, parts of GLIBC stop working. To fix this, we add an attribute that is used to turn on these extended portions of the network device dump. Sophisticaed applications like 'ip' that want to see this stuff will be changed to set the attribute, whereas things like GLIBC that don't care about VFs simply will not, and therefore won't be busted by the mere presence of VFs on a network device. Thanks to the tireless work of Greg Rose on this fix. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits) sfc: Fix assignment of ip_summed for pre-allocated skbs ppp: fix 'ppp_mp_reconstruct bad seq' errors enic: Fix endianness bug. gre: fix spelling in comments netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2) Revert "netfilter: ctnetlink: fix soft lockup when netlink adds new entries" davinci_emac: Do not free all rx dma descriptors during init mlx4_core: Fixing array indexes when setting port types phy: IC+101G and PHY_HAS_INTERRUPT flag netdev/phy/icplus: Correct broken phy_init code ipsec: be careful of non existing mac headers Move Logitech Harmony 900 from cdc_ether to zaurus hso: memsetting wrong data in hso_get_count() netfilter: ip6_route_output() never returns NULL. ethernet/broadcom: ip6_route_output() never returns NULL. ipv6: ip6_route_output() never returns NULL. jme: Fix FIFO flush issue atm: clip: remove clip_tbl ipv4: ping: Fix recvmsg MSG_OOB error handling. rtnetlink: Fix problem with buffer allocation ...
2012-02-24Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband One InfiniBand/RDMA regression fix for 3.3: - mlx4 SR-IOV changes added static exported functions, which doesn't build on powerpc at least. Fix from Doug Ledford for this. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Exported functions can't be static
2012-02-24Merge branch 'sfc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller
2012-02-25sfc: Fix assignment of ip_summed for pre-allocated skbsBen Hutchings
When pre-allocating skbs for received packets, we set ip_summed = CHECKSUM_UNNCESSARY. We used to change it back to CHECKSUM_NONE when the received packet had an incorrect checksum or unhandled protocol. Commit bc8acf2c8c3e43fcc192762a9f964b3e9a17748b ('drivers/net: avoid some skb->ip_summed initializations') mistakenly replaced the latter assignment with a DEBUG-only assertion that ip_summed == CHECKSUM_NONE. This assertion is always false, but it seems no-one has exercised this code path in a DEBUG build. Fix this by moving our assignment of CHECKSUM_UNNECESSARY into efx_rx_packet_gro(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-24ppp: fix 'ppp_mp_reconstruct bad seq' errorsBen McKeegan
This patch fixes a (mostly cosmetic) bug introduced by the patch 'ppp: Use SKB queue abstraction interfaces in fragment processing' found here: http://www.spinics.net/lists/netdev/msg153312.html The above patch rewrote and moved the code responsible for cleaning up discarded fragments but the new code does not catch every case where this is necessary. This results in some discarded fragments remaining in the queue, and triggering a 'bad seq' error on the subsequent call to ppp_mp_reconstruct. Fragments are discarded whenever other fragments of the same frame have been lost. This can generate a lot of unwanted and misleading log messages. This patch also adds additional detail to the debug logging to make it clearer which fragments were lost and which other fragments were discarded as a result of losses. (Run pppd with 'kdebug 1' option to enable debug logging.) Signed-off-by: Ben McKeegan <ben@netservers.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24enic: Fix endianness bug.Santosh Nayak
Sparse complaints the endian bug. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24davinci_emac: Do not free all rx dma descriptors during initChristian Riesch
This patch fixes a regression that was introduced by commit 0a5f38467765ee15478db90d81e40c269c8dda20 davinci_emac: Add Carrier Link OK check in Davinci RX Handler Said commit adds a check whether the carrier link is ok. If the link is not ok, the skb is freed and no new dma descriptor added to the rx dma channel. This causes trouble during initialization when the carrier status has not yet been updated. If a lot of packets are received while netif_carrier_ok returns false, all dma descriptors are freed and the rx dma transfer is stopped. The bug occurs when the board is connected to a network with lots of traffic and the ifconfig down/up is done, e.g., when reconfiguring the interface with DHCP. The bug can be reproduced by flood pinging the davinci board while doing ifconfig eth0 down ifconfig eth0 up on the board. After that, the rx path stops working and the overrun value reported by ifconfig is counting up. This patch reverts commit 0a5f38467765ee15478db90d81e40c269c8dda20 and instead issues warnings only if cpdma_chan_submit returns -ENOMEM. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: <stable@vger.kernel.org> Cc: Hegde, Vinay <vinay.hegde@ti.com> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24mlx4_core: Fixing array indexes when setting port typesYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23phy: IC+101G and PHY_HAS_INTERRUPT flagGiuseppe CAVALLARO
This patch adds the PHY_HAS_INTERRUPT flag for IC+101 device series. Also the patch does a simple dity-up to signal that the driver actually is for IP101A LF and IP101G devices. In fact, these are two similar PHYs that have the same IDs and mainly differ for the EEE capability supported in the G series. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23netdev/phy/icplus: Correct broken phy_init codeDavid McKay
The code for ip1001_config_init() was totally broken if you were not using RGMII. Instead of returning an error code or zero it actually returned the value in the IP1001_SPEC_CTRL_STATUS_2 register. It was also trying to set the IP1001_APS_ON bit , but never actually wrote back the register. The error checking was also incorrect in both this function and the reset function, so this patch fixes that up in a consistent fashion. Signed-off-by: David McKay <david.mckay@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23brcm80211: smac: only print block-ack timeout message at trace levelArend van Spriel
In regular use block-ack timeouts can happen so it does not make sense to fill the log with these messages. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-02 18:38:54 +0000