summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-11-06libertas: fix buffer overrunJohannes Berg
commit 48735d8d8bd701b1e0cd3d49c21e5e385ddcb077 upstream If somebody sends an invalid beacon/probe response, that can trash the whole BSS descriptor. The descriptor is, luckily, large enough so that it cannot scribble past the end of it; it's well above 400 bytes long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-06atl1: fix vlan tag regressionJay Cliburn
commit dc5596d920b504d263c7ca38bd76326179b13dee upstream Commit 401c0aabec4b97320f962a0161a846d230a6f7aa introduced a regression in the atl1 driver by storing the VLAN tag in the wrong TX descriptor field. This patch causes the VLAN tag to be stored in its proper location. Tested-by: Ramon Casellas <ramon.casellas@cttc.es> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22ath9k: fix oops on trying to hold the wrong spinlockLuis R. Rodriguez
commit a477e4e6d48d3ac7c7a75bad40585cb391e5c237 upstream We were trying to hold the wrong spinlock due to a typo on IEEE80211_BAR_CTL_TID_S's definition. We use this to compute the tid number and then hold this this tid number's spinlock. Tested-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22ath9k/mac80211: disallow fragmentation in ath9k, report to userspaceJohannes Berg
commit 4233df6b748193d45f79fb7448991a473061a65d upstream As I've reported, ath9k currently fails utterly when fragmentation is enabled. This makes ath9k "support" hardware fragmentation by not supporting fragmentation at all to avoid the double-free issue. The patch also changes mac80211 to report errors from the driver operation to userspace. That hack in ath9k should be removed once the rate control algorithm it has is fixed, and we can at that time consider removing the hw fragmentation support entirely since it's not used by any driver. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-18netdrvr: atl1e: Don't take the mdio_lock in atl1e_probeMatthew Wilcox
commit f382a0a8e9403c6d7f8b2cfa21e41fefb5d0c9bd upstream Lockdep warns about the mdio_lock taken with interrupts enabled then later taken from interrupt context. Initially, I considered changing these to spin_lock_irq/spin_unlock_irq, but then I looked at atl1e_phy_init() and saw that it calls msleep(). Sleeping while holding a spinlock is not allowed either. In the probe path, we haven't registered the interrupt handler, so it can't poke at this card yet. It's before we call register_netdev(), so I don't think any other threads can reach this card either. If I'm right, we don't need a spinlock at all. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-18sky2: Fix WOL regressionRafael J. Wysocki
commit 9d731d77c9794bb0a264f58d35949a1ab6dcc41c upstream Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using sky2_set_wol(). Remove an open-coded reference to the standard PCI PM registers that is not used any more. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tino Keitel <tino.keitel@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-18b43legacy: Fix failure in rate-adjustment mechanismLarry Finger
commit c6a2afdacccd56cc0be8e9a7977f0ed1509069f6 upstream Date: Sat, 6 Sep 2008 16:51:22 -0500 Subject: b43legacy: Fix failure in rate-adjustment mechanism A coding error present since b43legacy was incorporated into the kernel has prevented the driver from using the rate-setting mechanism of mac80211. The driver has been forced to remain at a 1 Mb/s rate. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-18libertas: clear current command on card removalDan Williams
commit 71b35f3abeb8f7f7e0afd7573424540cc5aae2d5 upstream If certain commands were in-flight when the card was pulled or the driver rmmod-ed, cleanup would block on the work queue stopping, but the work queue was in turn blocked on the current command being canceled, which didn't happen. Fix that. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-03e1000e: Fix incorrect debug warningLinus Torvalds
Doing 'WARN_ON(preempt_count())' was horribly horribly wrong, and would cause tons of warnings at bootup if PREEMPT was enabled because the initcalls currently run with the kernel lock, which increments the preempt count. At the same time, the warning was also insufficient, since it didn't check that interrupts were enabled. The proper debug function to use for something that can sleep and wants a warning if it's called in the wrong context is 'might_sleep()'. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02e1000e: update version from k4 to k6Jesse Brandeburg
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02e1000e: debug contention on NVM SWFLAGThomas Gleixner
This patch adds a mutex to the e1000e driver that would help catch any collisions of two e1000e threads accessing hardware at the same time. description and patch updated by Jesse Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02e1000e: drop stats lockJesse Brandeburg
the stats lock is left over from e1000, e1000e no longer has the adjust tbi stats function that required the addition of the stats lock to begin with. adding a mutex to acquire_swflag helped catch this one too. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02e1000e: remove phy read from inside spinlockJesse Brandeburg
thanks to tglx, we're finding some interesting reentrancy issues. this patch removes the phy read from inside a spinlock, paving the way for removing the spinlock completely. The phy read was only feeding a statistic that wasn't used. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02e1000e: do not ever sleep in interrupt contextJesse Brandeburg
e1000e was apparently calling two functions that attempted to reserve the SWFLAG bit for exclusive (to hardware and firmware) access to the PHY and NVM (aka eeprom). These accesses could possibly call msleep to wait for the resource which is not allowed from interrupt context. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02e1000e: reset swflag after resetting hardwareJesse Brandeburg
in the process of debugging things, noticed that the swflag is not reset by the driver after reset, and the swflag is probably not reset unless management firmware clears it after 100ms. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-01e1000e: write protect ICHx NVM to prevent malicious write/eraseBruce Allan
Set the hardware to ignore all write/erase cycles to the GbE region in the ICHx NVM. This feature can be disabled by the WriteProtectNVM module parameter (enabled by default) only after a hardware reset, but the machine must be power cycled before trying to enable writes. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: arjan@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-24ath9k: disable MIB interrupts to fix interrupt stormLuis R. Rodriguez
Enabling the MIB interrupts has proven to cause an interrupt storm after 7 hours of run. We will make use of the MIB interrupt once we have ANI supported added so for now to cure this we disable the interrupt. The interrupt storm can be seen as follows after 7 hours of run as reported by Steven Noonan <steven@uplinklabs.net>: 18:28:38 sum 1106.00 18:28:39 sum 1037.62 18:28:40 sum 1069.00 18:28:41 sum 1167.00 18:28:42 sum 1155.00 18:28:43 sum 1339.00 18:28:44 sum 18355.00 18:28:45 sum 17845.45 18:28:46 sum 15285.00 18:28:47 sum 17511.00 18:28:48 sum 17568.69 18:28:49 sum 17704.04 18:28:50 sum 18566.67 18:28:51 sum 18913.13 at 18:28:44 the MIB interrupt kicked off and caused huge latency which can be seen even on a video he submitted: http://www.youtube.com/watch?v=4GeCx1gZMpA Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-22Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-09-22ath9k: Fix IRQ nobody cared issue with ath9kSenthil Balasubramanian
IRQs should be disabled before calling free_irq. Also flush pending IRQs. Pasted the kernel log message for reference. kernel: irq 17: nobody cared (try booting with the "irqpoll" option) kernel: [<c0252d2c>] __report_bad_irq+0x2e/0x6f kernel: [<c0252f22>] note_interrupt+0x1b5/0x207 kernel: [<c025258b>] ? handle_IRQ_event+0x21/0x48 kernel: [<c02534cb>] handle_fasteoi_irq+0x8e/0xad kernel: [<c0205650>] do_IRQ+0x6c/0x84 kernel: [<c020425f>] common_interrupt+0x23/0x28 kernel: [<c034f6f6>] ? acpi_idle_enter_simple+0x198/0x205 kernel: [<c044686c>] ? menu_select+0x5c/0x78 kernel: [<c0445a95>] cpuidle_idle_call+0x59/0x89 kernel: [<c02029d7>] cpu_idle+0xae/0xcf kernel: [<c0543102>] rest_init+0x4e/0x50 kernel: ======================= kernel: handlers: kernel: [<f88fdd26>] (ath_isr+0x0/0x13a [ath9k]) kernel: Disabling IRQ #17 Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Tested-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-22wireless: zd1211rw: add device ID fix wifi dongle "trust nw-3100"born.into.silence@gmail.com
akpm: taken from http://bugzilla.kernel.org/show_bug.cgi?id=11587 I bought the wifi dongle trust nw-3100 wich is in fact a zd1211rw. Its hardware id was missing in the sources, adding it made it work flawlessly. Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-22ath9k: connectivity is lost after Group rekeying is doneSenthil Balasubramanian
Connectivtiy is lost after Group rekeying is done. The keytype maintained by ath9k is reset when group key is updated. Though sc_keytype can be reset only for broadcast key the proper fix would be to use mac80211 provided key type from txinfo during xmit and get rid of sc_keytype from ath9k ath_softc. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Tested-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop() RDMA/nes: Fix client side QP destroy IB/mlx4: Fix up fast register page list format mlx4_core: Set RAE and init mtt_sz field in FRMR MPT entries
2008-09-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: e100: Use pci_pme_active to clear PME_Status and disable PME# e1000: prevent corruption of EEPROM/NVM forcedeth: call restore mac addr in nv_shutdown path bnx2: Promote vector field in bnx2_irq structure from u16 to unsigned int sctp: Fix oops when INIT-ACK indicates that peer doesn't support AUTH sctp: do not enable peer features if we can't do them. sctp: set the skb->ip_summed correctly when sending over loopback. udp: Fix rcv socket locking
2008-09-18e100: Use pci_pme_active to clear PME_Status and disable PME#Rafael J. Wysocki
Currently e100 uses pci_enable_wake() to clear pending wake-up events and disable PME# during intitialization, but that function is not suitable for this purpose, because it immediately returns error code if device_may_wakeup() returns false for given device. Make e100 use pci_pme_active(), which carries out exactly the required operations, instead. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18e1000: prevent corruption of EEPROM/NVMChristopher Li
Andrey reports e1000 corruption, and that a patch in vmware's ESX fixed it. The EEPROM corruption is triggered by concurrent access of the EEPROM read/write. Putting a lock around it solve the problem. [akpm@linux-foundation.org: use DEFINE_SPINLOCK to avoid confusing lockdep] Signed-off-by: Christopher Li <chrisl@vmware.com> Reported-by: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Zach Amsden <zach@vmware.com> Cc: Pratap Subrahmanyam <pratap@vmware.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18forcedeth: call restore mac addr in nv_shutdown pathYinghai Lu
after | commit f735a2a1a4f2a0f5cd823ce323e82675990469e2 | Author: Tobias Diedrich <ranma+kernel@tdiedrich.de> | Date: Sun May 18 15:02:37 2008 +0200 | | [netdrvr] forcedeth: setup wake-on-lan before shutting down | | When hibernating in 'shutdown' mode, after saving the image the suspend hook | is not called again. | However, if the device is in promiscous mode, wake-on-lan will not work. | This adds a shutdown hook to setup wake-on-lan before the final shutdown. | | Signed-off-by: Tobias Diedrich <ranma+kernel@tdiedrich.de> | Signed-off-by: Jeff Garzik <jgarzik@redhat.com> my servers with nvidia ck804 and mcp55 will reverse mac address with kexec. it turns out that we need to restore the mac addr in nv_shutdown(). [akpm@linux-foundation.org: fix typo in printk] Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Tobias Diedrich <ranma+kernel@tdiedrich.de> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18bnx2: Promote vector field in bnx2_irq structure from u16 to unsigned intBenjamin Li
The bnx2 driver stores/uses the irq value from the pci_dev internally. But when it stores the irq value, it has been performing an integer demotion. Because of the recent changes made to arch/x86/kernel/io_apic.c, the new method in creating the irq value (using build_irq_for_pci_dev()) has exposed this bug on x86 systems. Because of this demotion when calling request_irq() from bnx2_request_irq(), the driver would get a return code of -EINVAL. This is because the kernel could not find the requested irq descriptor. By storing the irq value properly, the kernel can find the correct irq descriptor and the bnx2 driver can operate normally. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-16hpplus: fix build regressionStephen Hemminger
This fixes kernel regression for 2.6.27-rc in http://bugzilla.kernel.org/show_bug.cgi?id=11547 The change to split 8390 into old isa and non-isa versions overlooked this driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-16Revert "b43/b43legacy: add RFKILL_STATE_HARD_BLOCKED support"Linus Torvalds
This reverts commit bc19d6e0b74ef03a3baf035412c95192b54dfc6f, which as Larry Finger reports causes the radio LED on his system to no longer respond to rfkill switch events. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Requested-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-15IB/mlx4: Fix up fast register page list formatVladimir Sokolovsky
Byte swap the addresses in the page list for fast register work requests to big endian to match what the HCA expectx. Also, the addresses must have the "present" bit set so that the HCA knows it can access them. Otherwise the HCA will fault the first time it accesses the memory region. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-12niu: panic on resetSantwona Behera
The reset_task function in the niu driver does not reset the tx and rx buffers properly. This leads to panic on reset. This patch is a modified implementation of the previously posted fix. Signed-off-by: Santwona Behera <santwona.behera@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-11ath9k: Assign seq# when mac80211 requests thisJouni Malinen
Use TX control flag IEEE80211_TX_CTL_ASSIGN_SEQ as a request to update the seq# for the frames. This will likely require some further cleanup to get seq# correctly for Beacons vs. other frames and also potentially for multiple BSSes. Anyway, this is better than ending up sending out most frames with seq# 0. (This is a backport of patch w/ same title already in net-next-2.6. It is verified to fix http://bugzilla.kernel.org/show_bug.cgi?id=11394 and it should be acceptable for -rc due to the driver being new in 2.6.27.) Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05forcedeth: fix kexec regressionRafael J. Wysocki
Fix regression tracked as http://bugzilla.kernel.org/show_bug.cgi?id=11361 and caused by commit f735a2a1a4f2a0f5cd823ce323e82675990469e2 ("[netdrvr] forcedeth: setup wake-on-lan before shutting down") that makes network adapters integrated into the NVidia MCP55 chipsets fail to work in kexeced kernels. The problem appears to be that if the adapter is put into D3_hot during ->shutdown(), it cannot be brought back into D0 after kexec (ref. http://marc.info/?l=linux-kernel&m=121900062814967&w=4). Therefore, only put forcedeth into D3 during ->shutdown() if the system is to be powered off. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bnx2x: Accessing un-mapped page ath9k: Fix TX control flag use for no ACK and RTS/CTS ath9k: Fix TX status reporting iwlwifi: fix STATUS_EXIT_PENDING is not set on pci_remove iwlwifi: call apm stop on exit iwlwifi: fix Tx cmd memory allocation failure handling iwlwifi: fix rx_chain computation iwlwifi: fix station mimo power save values iwlwifi: remove false rxon if rx chain changes iwlwifi: fix hidden ssid discovery in passive channels iwlwifi: W/A for the TSF correction in IBSS netxen: Remove workaround for chipset quirk pcnet-cs, axnet_cs: add new IDs, remove dup ID with less info ixgbe: initialize interrupt throttle rate net/usb/pegasus: avoid hundreds of diagnostics tipc: Don't use structure names which easily globally conflict.
2008-09-03Merge branch 'davem-fixes' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-09-03bnx2x: Accessing un-mapped pageEilon Greenstein
The allocated RX buffer size was 64 bytes bigger than the PCI mapped size with no good reason. If the packet was actually using the buffer up to its limit and if the last 64 bytes of the buffer crossed 4KB boundary then an unmapped PCI page was accessed. The fix is to use only one parameter for the buffer size - there is no need to differentiate between the buffer size and the PCI mapping size since the extra 64 bytes can actually be used by the FW to align the Ethernet payload to 64 bytes. Also updating the driver version and date Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-03ath9k: Fix TX control flag use for no ACK and RTS/CTSJouni Malinen
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03ath9k: Fix TX status reportingJouni Malinen
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: fix STATUS_EXIT_PENDING is not set on pci_removeGregory Greenman
This patch sets STATUS_EXIT_PENDING on pci_remove. Otherwise iwl4965_down may fail to uninitialize the driver. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: call apm stop on exitGregory Greenman
This patch calls apm stop on exit and suspend. Without this patch hardware consumes power even after driver is removed or suspended. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: fix Tx cmd memory allocation failure handlingTomas Winkler
This patch "iwlwifi: do not use GFP_DMA in iwl_tx_queue_init" removes GFP_DMA from allocation tx command buffers. GFP_DMA allows allocation only for memory under 16M which causes allocation problems suspend/resume flows. Using kmalloc is temporal solution and some consistent/coherent allocation schema will be more correct. Since iwlwifi hardware supports 64bit address this solution should work on x86 (32 and 64bit) for now. This patch fixes memory freeing problem in the previous patch. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: fix rx_chain computationTomas Winkler
This patch fixes rx_chain computation. The code that adjusts number of rx chains to number supported by HW was missing. Miss configuration causes firmware error. Note: iwlwifi supports HW with up to 3 RX chains (2x2, 2x3, 1x2, and 3x3 MIMO). This patch also simplifies the whole RX chain computation. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: fix station mimo power save valuesRon Rindjunsky
This patch fixes the wrong use MIMO power save values. Our TX was configured with our MIMO power save values instead of peer's MIMO power save values, this may affect connectivity. The peer STA/AP may not sense our traffic at all as it doesn't have all RX chains opened. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: remove false rxon if rx chain changesMohamed Abbas
Rx chain might change during power save transitions but it doesn't require sending Full-ROXN command to the firmware. Full-RXON requires reconnection to an AP and thus affects user experience. The patch avoids the Full-RXON by removing the rx_chain modification check in iwl_full_rxon_required function. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: fix hidden ssid discovery in passive channelsRon Rindjunsky
This enables sending of direct probes on passive channels, as long as traffic was detected on that channel. This enables connectivity to hidden/non broadcasting SSIDs APs on passive channels. Note 5000 HW declares all 5.2 spectrum as passive. Signed-off-by: Cahill Ben <ben.m.cahill@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: W/A for the TSF correction in IBSSAssaf Krauss
This patch is a W/A for the TSF sync issue in IBSS merging. HW is not capable to sync TSF (it's constantly little behind). This creates constant IBSS merging upon reception of each beacon, adding and removing station which in turn creates above 50% packet loss and thus dramatically degrade the throughput. The W/A simply stops the driver from declaring it has a reliable TSF value and thus eliminates IBSS merging. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03netxen: Remove workaround for chipset quirkDhananjay Phadke
Remove chipset-specific quirk workaround; the workaround caused unrecoverable DMA lockups when the driver was loaded following a PXE boot. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Michael Brown <mbrown@fensystems.co.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03pcnet-cs, axnet_cs: add new IDs, remove dup ID with less infoKomuro
pcnet_cs: add new ID: "corega Ether PCC-TD". remove duplicate ID: "IC-CARD". axnet_cs: add new ID: "IO DATA ETXPCM". Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: initialize interrupt throttle rateAndy Gospodarek
This commit dropped the setting of the default interrupt throttle rate. commit 021230d40ae0e6508d6c717b6e0d6d81cd77ac25 Author: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Date: Mon Mar 3 15:03:45 2008 -0800 ixgbe: Introduce MSI-X queue vector code The following patch adds it back. Without this the default value of 0 causes the performance of this card to be awful. Restoring these to the default values yields much better performance. This regression has been around since 2.6.25. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: stable@kernel.org [2.6.25 and later] Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03net/usb/pegasus: avoid hundreds of diagnosticsDavid Brownell
Make the "pegasus" driver scream less loudly in the face of problems as it initializes, avoiding hundreds of messages: - ratelimit some key error messages - avoid some spurious diagnostics caused by strange codeflow And fix one instance of goofy indentation. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-15 17:01:56 +0000