summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2012-05-14stmmac: fix suspend/resume lockingGiuseppe CAVALLARO
Upon resume from standby, there is a possible interrupt unsafe locking scenario raised when configure the Kernel with CONFIG_PROVE_LOCKING. So this patch fixes that in PM driver stuff by calling lock/unlock_irqsave/restore. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-14stmmac: add mixed burst for DMAGiuseppe CAVALLARO
In mixed burst (MB) mode, the AHB master always initiates the bursts with fixed-size when the DMA requests transfers of size less than or equal to 16 beats. This patch adds the MB support and the flag that can be passed from the platform to select it. MB mode can also give some benefits in terms of performances on some platforms. v2: fixed Coding Style Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-14stmmac: extend mac addr reg and fix perfect fileringGiuseppe CAVALLARO
This patch is to extend the number of MAC address registers for 16 to 32. In fact, other new 16 registers are available in new chips and this can help on perfect filter mode for unicast. This patch also fixes the perfect filtering mode by setting the bit 31 in the MAC address registers. v2: fixed Coding Style. Signed-off-by: Gianni Antoniazzi <gianni.antoniazzi-ext@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-14dm9000: some coldfire boards need thisSteven King
Some coldfire boards (ie m5253demo) have a dm9000 onboard. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2012-05-12igb: Add Support for new i210/i211 devices.Carolyn Wyborny
This patch adds new initialization functions and device support for i210 and i211 devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-12igb: Add function and pointers for 82580 low power state settings.Carolyn Wyborny
82580 and later parts did not have low power setting functions. This patch adds the specific functions, pointers and assignments for these low power settings. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-12rndis_wlan: cleanup: change oid from __le32 to u32 in various placesJussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12rndis_host: cleanup: change oid from __le32 to u32 in rndis_query()Jussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12rndis_wlan: cleanup: byteswap data from device instead of RNDIS_* definesJussi Kivilinna
All other values from device provided buffer are byteswapped, so it seems more logical to do same for these. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12rndis_host: cleanup: byteswap data from device instead of RNDIS_* definesJussi Kivilinna
All other values from device provided buffer are byteswapped, so it seems more logical to do same for these. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12usb/net: rndis: merge command codesLinus Walleij
Switch the hyperv filter and rndis gadget driver to use the same command enumerators as the other drivers and delete the surplus command codes. Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12usb/net: rndis: merge duplicate 802_* OIDsLinus Walleij
The 802_* network OIDs were duplicated, so let's merge them and use the RNDIS_* prefixed definitions from the hyperV driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12usb/net: rndis: eliminate first set of duplicate OIDsLinus Walleij
The RNDIS protocol contains a vast number of Object ID:s (OIDs). The current definitions had multiple definitions of these ID:s, let's use the nicely RNDIS_*-prefixed defines from the HyperV implementation, rename everywhere they're used, and copy+rename the few that were missing from this list of objects. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12usb/net: rndis: remove ambigous status codesLinus Walleij
The RNDIS status codes are redefined with much stranged ifdeffery and only one of these codes was used in the hyperv driver, and there it is very clearly referring to the RNDIS variant, not some other status. So clarify this by explictly using the RNDIS_* prefixed status code in the hyperv drivera and delete the duplicate defines. Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12usb/net: rndis: break out <linux/rndis.h> definesLinus Walleij
As a first step to consolidate the RNDIS implementations, break out a common file with all the #defines and move it to <linux/rndis.h>. This also deletes the immediate duplicated defines in the <linux/rndis.h> file that yields a lot of compilation warnings. Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12usb/net: rndis: inline the cpu_to_le32() macroLinus Walleij
The header file <linux/usb/rndis_host.h> used a number of #defines that included the cpu_to_le32() macro to assure the result will be in LE endianness. Inlining this into the code instead of using it in the code definitions yields consolidation opportunities later on as you will see in the following patches. The individual drivers also used local defines - all are switched over to the pattern of doing the conversion at the call sites instead. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-11net: of/phy: fix build error when phylib is built as a moduleBjørn Mork
CONFIG_OF_MDIO is tristate and will be m if PHYLIB is m. Use IS_ENABLED macro to prevent build error: ERROR: "of_mdio_find_bus" [drivers/net/phy/mdio-mux.ko] undefined! Reported-by: Randy Dunlap <rdunlap@xenotime.net> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10net, drivers/net: Convert compare_ether_addr_64bits to ether_addr_equal_64bitsJoe Perches
Use the new bool function ether_addr_equal_64bits to add some clarity and reduce the likelihood for misuse of compare_ether_addr_64bits for sorting. Done via cocci script: $ cat compare_ether_addr_64bits.cocci @@ expression a,b; @@ - !compare_ether_addr_64bits(a, b) + ether_addr_equal_64bits(a, b) @@ expression a,b; @@ - compare_ether_addr_64bits(a, b) + !ether_addr_equal_64bits(a, b) @@ expression a,b; @@ - !ether_addr_equal_64bits(a, b) == 0 + ether_addr_equal_64bits(a, b) @@ expression a,b; @@ - !ether_addr_equal_64bits(a, b) != 0 + !ether_addr_equal_64bits(a, b) @@ expression a,b; @@ - ether_addr_equal_64bits(a, b) == 0 + !ether_addr_equal_64bits(a, b) @@ expression a,b; @@ - ether_addr_equal_64bits(a, b) != 0 + ether_addr_equal_64bits(a, b) @@ expression a,b; @@ - !!ether_addr_equal_64bits(a, b) + ether_addr_equal_64bits(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10drivers/net: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10be2net: avoid disabling sriov while VFs are assignedSathya Perla
Calling pci_disable_sriov() while VFs are assigned to VMs causes kernel panic. This patch uses PCI_DEV_FLAGS_ASSIGNED bit state of the VF's pci_dev to avoid this. Also, the unconditional function reset cmd issued on a PF probe can delete the VF configuration for the previously enabled VFs. A scratchpad register is now used to issue a function reset only when needed (i.e., in a crash dump scenario.) Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
2012-05-09ixgbe: update version numberDon Skidmore
Update version number to better match the version of the out of tree driver with similar functionality. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09ixgbe: cleanup the hwmon function callsDon Skidmore
When the hwmon code was initially added it was with the assumption that a sysfs patch would be also coming soon. Since that isn't the case some clean up needs to be done. This patch does that. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09ixgbe: support software timestampingJacob Keller
Kernel software timestamping requires that the driver calls skb_tx_timestamp just before passing the skb to the MAC, in order to provide the best software timestamps. This patch adds this call for that support. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09ixgbe: add support for get_ts_infoJacob Keller
This patch adds support for the ethtool get_ts_info operation, which enables access of available timestamp/timesync support for that device. It can query which ptp clock device is associated with the particular port. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09ixgbe: correct disable_rx_buff timeoutJacob Keller
The current value of the udelay timeout for ixgbe_disable_rx_buff is too short. This causes the security path to not not be properly disabled during the section that is meant to have it turned off. The end result causes a race condition that results in RX issues. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09ixgbe: Enable timesync clock-out feature for PPS support on X540Jacob E Keller
This patch enables the PPS system in the PHC framework, by enabling the clock-out feature on the X540 device. Causes the SDP0 to be set as a 1Hz clock. Also configures the timesync interrupt cause in order to report each pulse to the PPS via the PHC framework, which can be used for general system clock synchronization. (This allows a stable method for tuning the general system time via the on-board SYSTIM register based clock.) Signed-off-by: Jacob E Keller <jacob.e.keller@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09ixgbe: Hardware Timestamping + PTP Hardware Clock (PHC)Jacob Keller
This patch enables hardware timestamping for use with PTP software by extracting a ns counter from an arbitrary fixed point cycles counter. The hardware generates SYSTIME registers using the DMA tick which changes based on the current link speed. These SYSTIME registers are converted to ns using the cyclecounter and timecounter structures provided by the kernel. Using the SO_TIMESTAMPING api, software can enable and access timestamps for PTP packets. The SO_TIMESTAMPING API has space for 3 different kinds of timestamps, SYS, RAW, and SOF. SYS hardware timestamps are hardware ns values that are then scaled to the software clock. RAW hardware timestamps are the direct raw value of the ns counter. SOF software timestamps are the software timestamp calculated as close as possible to the software transmit, but are not offloaded to the hardware. This patch only supports the RAW hardware timestamps due to inefficiency of the SYS design. This patch also enables the PHC subsystem features for atomically adjusting the cycle register, and adjusting the clock frequency in parts per billion. This frequency adjustment works by slightly adjusting the value added to the cycle registers each DMA tick. This causes the hardware registers to overflow rapidly (approximately once every 34 seconds, when at 10gig link). To solve this, the timecounter structure is used, along with a timer set for every 25 seconds. This allows for detecting register overflow and converting the cycle counter registers into ns values needed for providing useful timestamps to the network stack. Only the basic required clock functions are supported at this time, although the hardware supports some ancillary features and these could easily be enabled in the future. Note that use of this hardware timestamping requires modifying daemon software to use the SO_TIMESTAMPING API for timestamps, and the ptp_clock PHC framework for accessing the clock. The timestamps have no relation to the system time at all, so software must use the posix clock generated by the PHC framework instead. Signed-off-by: Jacob E Keller <jacob.e.keller@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09ixgbe: Fix bogus error messageGreg Rose
If the VF sends a MACVLAN request with index of zero then it is not actually trying to add a filter. Check the index value and only indicate that operation is not allowed when the VF is actually trying to add a filter. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09ixgbe: Set Drop_EN bit when multiple Rx queues are present w/o flow controlAlexander Duyck
The drop enable bit can be used to improve the performance of the adapter in the case of multiple queues being present. This performance gain is due to the fact that some slower CPUs can cause the FIFO to backfill preventing faster CPUs from receiving additional work. By setting the drop enable bit we prevent this and instead just drop the packets that would have been bound for the slower CPU. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09ixgbe: Clean up priority based flow controlAlexander Duyck
This change cleans up the logic in the priority based flow control configuration routines. Both the 82599 and 82598 based routines perform similar functions however they are both arranged completely differently. This patch goes over both of them to clean up the code. In addition I am dropping the ixgbe_fc_pfc flow control mode and instead just replacing it with checks for if priority flow control is enabled. This allows us to maintain some of the link flow control information which allows for an easier transition between link and priority flow control. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09ixgbe: Exit on error case in VF message processingAlexander Duyck
Previously we would get a mailbox error and still process the message. Instead we should exit on error. In addition we should also be flushing the ACK of the message so that we can guarantee that the other end is aware we have received the message while we are processing it. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09igb: output register's information related to RX/TX queue[4-15]Koki Sanagi
Current igb outputs registers related to TX/RX queues(ex. RDT, RDH, TDT, TDH). But it thinks the number of RX/TX queues is 4. But 82576 has 16 RX/TX queues. This patch modifies igb to output the rest of the registers if the device is 82576. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Acked-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09netxen_nic: Fix estimation of recv MSS in case of LRORajesh Borundia
o Linux stack estimates MSS from skb->len or skb_shinfo(skb)->gso_size. In case of LRO skb->len is aggregate of len of number of packets hence MSS obtained using skb->len would be incorrect. Incorrect estimation of recv MSS would lead to delayed acks in some traffic patterns (which sends two or three packets and wait for ack and only then send remaining packets). This leads to drop in performance. Hence we need to set gso_size to MSS obtained from firmware. o This is fixed recently in firmware hence the MSS is obtained based on capability. If fw is capable of sending the MSS then only driver sets the gso_size. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09netxen: added miniDIMM support in driver.Sucheta Chakraborty
Driver queries DIMM information from firmware and accordingly sets "presence" field of the structure. "presence" field when set to 0xff denotes invalid flag. And when set to 0x0 denotes DIMM memory is not present. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09netxen_nic: Allow only useful and recommended firmware dump capture mask valuesManish chopra
o 0x3, 0x7, 0xF, 0x1F, 0x3F, 0x7F and 0xFF are the allowed capture masks. Signed-off-by: Manish chopra <manish.chopra@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09netxen_nic: disable minidump by defaultSritej Velaga
disable fw dump by default at start up. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10sfc: Implement module EEPROM access for SFE4002 and SFN4112FBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10sfc: Added support for new ethtool APIs for obtaining module eepromStuart Hodgson
Currently allows for SFP+ eeprom to be returned using the ethtool API. This can be extended in future to handle different eeprom formats and sizes Signed-off-by: Stuart Hodgson <smhodgson@solarflare.com> [bwh: Drop redundant validation, comment, whitespace] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10sfc: By default refill RX rings as soon as space for a batchDavid Riddoch
Previously we refilled with much larger batches, which caused large latency spikes. We now have many more much much smaller spikes! Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10sfc: Fill RX rings completely full, rather than to 95% fullDavid Riddoch
There was no runtime control of the fast_fill_limit in any case, so purged that field. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10sfc: Fix missing cleanup in failure path of efx_pci_probe()Ben Hutchings
We need to clear the private data pointer in the PCI device. Also reorder cleanup in efx_pci_remove() for symmetry. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10sfc: Do not attempt to flush queues if DMA is disabledStuart Hodgson
efx_nic_fatal_interrupt() disables DMA before scheduling a reset. After this, we need not and *cannot* flush queues. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-09e1000e: Fix merge conflict (net->net-next)Jeff Kirsher
During merge of net to net-next the changes in patch: e1000e: Fix default interrupt throttle rate not set in NIC HW got munged in param.c of the e1000e driver. This rectifies the merge issues. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09e1000e: Fix merge conflict (net->net-next)Jeff Kirsher
During merge of net to net-next the changes in patch: e1000e: Fix default interrupt throttle rate not set in NIC HW got munged in param.c of the e1000e driver. This rectifies the merge issues. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-08iwlwifi: fix-up some merge damage from commit 0d6c4a2John W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08brcmfmac: add out of band interrupt supportFranky Lin
Some sdio host controllers do not support real in band interrupt. Software polling mode as a replacement is not fast enough for high throughput and new features. Also some in band interrupts do not support host wake up on embedded platform even when they are real physical interrupts. Therefore out of band (oob) interrupt mechanism is implemented for these scenarios. To provide oob irq number and flags used for irq registration in brcmfmac, a platform device contains irq resource must be registered in board specific code. Here is an example of platform device structure: struct resource brcmf_sdio_res[] = { { .start = GPIO_BRCMF_SDIO_OOB_NUM, .end = GPIO_BRCMF_SDIO_OOB_NUM, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, } }; struct platform_device brcmf_sdio_device = { .name = "brcmf_sdio_pd", .id = -1, .num_resources = ARRAY_SIZE(brcmf_sdio_res), .resource = brcmf_sdio_res, }; Reviewed-by: pieter-paul giesberts <pieterpg@broadcom.com> Reviewed-by: arend van spriel <arend@broadcom.com> Signed-off-by: franky lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08brcmfmac: postpone interrupt register functionFranky Lin
For out of band interrupt which is going to be introduced shortly, the interrupt register function must be called after firmware is downloaded. This patch moves it from brcmf_sdbrcm_probe to brcmf_sdbrcm_bus_init. Reviewed-by: pieter-paul giesberts <pieterpg@broadcom.com> Reviewed-by: arend van spriel <arend@broadcom.com> Signed-off-by: franky lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08brcmfmac: check bus state for statusFranky Lin
Bus state should be the correct flag for bus status. Use it instead of result from previous function call for backplane clock switch. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-04-26 01:28:14 +0000