summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-12-20igb: Fix for issue where values could be too high for udelay function.Carolyn Wyborny
commit df29df92adda751ac04ca5149d30014b5199db81 upstream. This patch changes the igb_phy_has_link function to check the value of the parameter before deciding to use udelay or mdelay in order to be sure that the value is not too high for udelay function. Signed-off-by: Sunil K Pandey <sunil.k.pandey@intel.com> Signed-off-by: Kevin B Smith <kevin.b.smith@intel.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20mwifiex: fix memory leak issue for ibss joinUjjal Roy
commit 517543fd72d577dde2ebd9505dc4abf26d589f9a upstream. For IBSS join if the requested SSID matches current SSID, it returns without freeing the allocated beacon IE buffer. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20iwlwifi: mvm: check sta_id/drain values in debugfsJohannes Berg
commit 60765a47a433d54e4744c285ad127f182dcd80aa upstream. The station ID must be valid, if it's out of range then the array access may crash. Validate the station ID to the array length, and also validate the drain value even if that doesn't matter all that much. Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20ath9k: Fix XLNA bias strengthSujith Manoharan
commit a1783a7b0846fc6414483e6caf646db72023fffd upstream. The EEPROM parameter to determine whether the bias strength values for XLNA have to be applied is part of the miscConfiguration field and not featureEnable. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20ath9k: Fix QuickDrop usageSujith Manoharan
commit 93c1cfbe598f72cfa7be49e4a7d2a1d482e15119 upstream. Bit 5 in the miscConfiguration field of the base EEPROM header denotes whether QuickDrop is enabled or not. Fix the incorrect usage of BIT(1) and also make sure that this is done only for the required chips. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11tg3: avoid double-freeing of rx data memoryIvan Vecera
commit 85aec73d595b8847f9c4ea571deb127913f0d508 upstream. If build_skb fails the memory associated with the ring buffer is freed but the ri->data member is not zeroed in this case. This causes a double-free of this memory in tg3_free_rings->... path. The patch moves this block after setting ri->data to NULL. It would be nice to fix this bug also in stable >= v3.4 trees. Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11iwlwifi: dvm: don't override mac80211's queue settingEmmanuel Grumbach
commit f6b129527ca15bae29ffb9417ddaa1c9d99ffc5d upstream. Since we set IEEE80211_HW_QUEUE_CONTROL, we can let mac80211 do the queue assignement and don't need to override its decisions. While reassiging the same values is harmless of course, it triggered a WARNING when iwlwifi and mac80211 came to different conclusions. This happened when mac80211 set IEEE80211_TX_CTL_SEND_AFTER_DTIM, but didn't route the packet to the cab_queue because no stations were asleep. iwlwifi should not override mac80211's decicions for offchannel packets and packets to be sent after DTIM, but it should override mac80211's decision for AMPDUs since we have a special queue for them. So for AMPDU, we still override info->hw_queue by the AMPDU queue. This avoids: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2531 at drivers/net/wireless/iwlwifi/dvm/tx.c:456 iwlagn_tx_skb+0x6c5/0x883() Modules linked in: CPU: 0 PID: 2531 Comm: hostapd Not tainted 3.12.0-rc5+ #1 Hardware name: /D53427RKE, BIOS RKPPT10H.86A.0017.2013.0425.1251 04/25/2013 0000000000000000 0000000000000009 ffffffff8189aa62 0000000000000000 ffffffff8105a4f2 ffff880058339a48 ffffffff815f8a04 0000000000000000 ffff8800560097b0 0000000000000208 0000000000000000 ffff8800561a9e5e Call Trace: [<ffffffff8189aa62>] ? dump_stack+0x41/0x51 [<ffffffff8105a4f2>] ? warn_slowpath_common+0x78/0x90 [<ffffffff815f8a04>] ? iwlagn_tx_skb+0x6c5/0x883 [<ffffffff815f8a04>] ? iwlagn_tx_skb+0x6c5/0x883 [<ffffffff818a0040>] ? put_cred+0x15/0x15 [<ffffffff815f6db4>] ? iwlagn_mac_tx+0x19/0x2f [<ffffffff8186cc45>] ? __ieee80211_tx+0x226/0x29b [<ffffffff8186e6bd>] ? ieee80211_tx+0xa6/0xb5 [<ffffffff8186e98b>] ? ieee80211_monitor_start_xmit+0x1e9/0x204 [<ffffffff8171ce5f>] ? dev_hard_start_xmit+0x271/0x3ec [<ffffffff817351ac>] ? sch_direct_xmit+0x66/0x164 [<ffffffff8171d1bf>] ? dev_queue_xmit+0x1e5/0x3c8 [<ffffffff817fac5a>] ? packet_sendmsg+0xac5/0xb3d [<ffffffff81709a09>] ? sock_sendmsg+0x37/0x52 [<ffffffff810f9e0c>] ? __do_fault+0x338/0x36b [<ffffffff81713820>] ? verify_iovec+0x44/0x94 [<ffffffff81709e63>] ? ___sys_sendmsg+0x1f1/0x283 [<ffffffff81140a73>] ? __inode_wait_for_writeback+0x67/0xae [<ffffffff8111735e>] ? __cache_free.isra.46+0x178/0x187 [<ffffffff811173b1>] ? kmem_cache_free+0x44/0x84 [<ffffffff81132c22>] ? dentry_kill+0x13d/0x149 [<ffffffff81132f6f>] ? dput+0xe5/0xef [<ffffffff81136e04>] ? fget_light+0x2e/0x7c [<ffffffff8170ae62>] ? __sys_sendmsg+0x39/0x57 [<ffffffff818a7e39>] ? system_call_fastpath+0x16/0x1b ---[ end trace 1b3eb79359c1d1e6 ]--- Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11net: smc91: fix crash regression on the versatileLinus Walleij
commit a0c20fb02592d372e744d1d739cda3e1b3defaae upstream. After commit e9e4ea74f06635f2ffc1dffe5ef40c854faa0a90 "net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data" The Versatile SMSC LAN91C111 is crashing like this: ------------[ cut here ]------------ kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599! Internal error: Oops - BUG: 0 [#1] ARM Modules linked in: CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24 task: c6ccfaa0 ti: c6cd0000 task.ti: c6cd0000 PC is at smc_hardware_send_pkt+0x198/0x22c LR is at smc_hardware_send_pkt+0x24/0x22c pc : [<c01be324>] lr : [<c01be1b0>] psr: 20000013 sp : c6cd1d08 ip : 00000001 fp : 00000000 r10: c02adb08 r9 : 00000000 r8 : c6ced802 r7 : c786fba0 r6 : 00000146 r5 : c8800000 r4 : c78d6000 r3 : 0000000f r2 : 00000146 r1 : 00000000 r0 : 00000031 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 06cf4000 DAC: 00000015 Process udhcpc (pid: 43, stack limit = 0xc6cd01c0) Stack: (0xc6cd1d08 to 0xc6cd2000) 1d00: 00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868 1d20: c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60 1d40: 00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000 1d60: c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000 1d80: c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000 1da0: c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000 1dc0: 00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000 1de0: 00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740 1e00: 01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff 1e20: 43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc 1e40: 00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88 1e60: c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1e80: 00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0 1ea0: 00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08 1ec0: 00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000 1ee0: 00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000 1f00: 00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002 1f20: 06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c 1f40: 00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0 1f60: 00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0 1f80: 00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8 1fa0: c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000 1fc0: be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000 1fe0: 00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000 [<c01be324>] (smc_hardware_send_pkt+0x198/0x22c) from [<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8) [<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8) from [<c0208554>] (dev_hard_start_xmit+0x460/0x4cc) [<c0208554>] (dev_hard_start_xmit+0x460/0x4cc) from [<c021d1d8>] (sch_direct_xmit+0x94/0x18c) [<c021d1d8>] (sch_direct_xmit+0x94/0x18c) from [<c02087f8>] (dev_queue_xmit+0x238/0x42c) [<c02087f8>] (dev_queue_xmit+0x238/0x42c) from [<c027ba74>] (packet_sendmsg+0xbe8/0xd28) [<c027ba74>] (packet_sendmsg+0xbe8/0xd28) from [<c01f2870>] (sock_sendmsg+0x84/0xa8) [<c01f2870>] (sock_sendmsg+0x84/0xa8) from [<c01f4628>] (SyS_sendto+0xb8/0xdc) [<c01f4628>] (SyS_sendto+0xb8/0xdc) from [<c0013840>] (ret_fast_syscall+0x0/0x2c) Code: e3130002 1a000001 e3130001 0affffcd (e7f001f2) ---[ end trace 81104fe70e8da7fe ]--- Kernel panic - not syncing: Fatal exception in interrupt This is because the macro operations in smc91x.h defined for Versatile are missing SMC_outsw() as used in this commit. The Versatile needs and uses the same accessors as the other platforms in the first if(...) clause, just switch it to using that and we have one problem less to worry about. This includes a hunk of a patch from Will Deacon fixin the other 32bit platforms as well: Innokom, Ramses, PXA, PCM027. Checkpatch complains about spacing, but I have opted to follow the style of this .h-file. Cc: Russell King <linux@arm.linux.org.uk> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11can: c_can: don't call pm_runtime_get_sync() from interrupt contextMarc Kleine-Budde
commit e35d46adc49b469fd92bdb64fea8af93640e6651 upstream. The c_can driver contians a callpath (c_can_poll -> c_can_state_change -> c_can_get_berr_counter) which may call pm_runtime_get_sync() from the IRQ handler, which is not allowed and results in "BUG: scheduling while atomic". This problem is fixed by introducing __c_can_get_berr_counter, which will not call pm_runtime_get_sync(). Reported-by: Andrew Glen <AGlen@bepmarine.com> Tested-by: Andrew Glen <AGlen@bepmarine.com> Signed-off-by: Andrew Glen <AGlen@bepmarine.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11can: sja1000: fix {pre,post}_irq() handling and IRQ handler return valueOliver Hartkopp
commit 2fea6cd303c0d0cd9067da31d873b6a6d5bd75e7 upstream. This patch fixes the issue that the sja1000_interrupt() function may have returned IRQ_NONE without processing the optional pre_irq() and post_irq() function before. Further the irq processing counter 'n' is moved to the end of the while statement to return correct IRQ_[NONE|HANDLED] values at error conditions. Reported-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08team: fix master carrier set when user linkup is enabledJiri Pirko
[ Upstream commit f5e0d34382e18f396d7673a84df8e3342bea7eb6 ] When user linkup is enabled and user sets linkup of individual port, we need to recompute linkup (carrier) of master interface so the change is reflected. Fix this by calling __team_carrier_check() which does the needed work. Please apply to all stable kernels as well. Thanks. Reported-by: Jan Tluka <jtluka@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08net: 8139cp: fix a BUG_ON triggered by wrong bytes_complYang Yingliang
[ Upstream commit 7fe0ee099ad5e3dea88d4ee1b6f20246b1ca57c3 ] Using iperf to send packets(GSO mode is on), a bug is triggered: [ 212.672781] kernel BUG at lib/dynamic_queue_limits.c:26! [ 212.673396] invalid opcode: 0000 [#1] SMP [ 212.673882] Modules linked in: 8139cp(O) nls_utf8 edd fuse loop dm_mod ipv6 i2c_piix4 8139too i2c_core intel_agp joydev pcspkr hid_generic intel_gtt floppy sr_mod mii button sg cdrom ext3 jbd mbcache usbhid hid uhci_hcd ehci_hcd usbcore sd_mod usb_common crc_t10dif crct10dif_common processor thermal_sys hwmon scsi_dh_emc scsi_dh_rdac scsi_dh_hp_sw scsi_dh ata_generic ata_piix libata scsi_mod [last unloaded: 8139cp] [ 212.676084] CPU: 0 PID: 4124 Comm: iperf Tainted: G O 3.12.0-0.7-default+ #16 [ 212.676084] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 212.676084] task: ffff8800d83966c0 ti: ffff8800db4c8000 task.ti: ffff8800db4c8000 [ 212.676084] RIP: 0010:[<ffffffff8122e23f>] [<ffffffff8122e23f>] dql_completed+0x17f/0x190 [ 212.676084] RSP: 0018:ffff880116e03e30 EFLAGS: 00010083 [ 212.676084] RAX: 00000000000005ea RBX: 0000000000000f7c RCX: 0000000000000002 [ 212.676084] RDX: ffff880111dd0dc0 RSI: 0000000000000bd4 RDI: ffff8800db6ffcc0 [ 212.676084] RBP: ffff880116e03e48 R08: 0000000000000992 R09: 0000000000000000 [ 212.676084] R10: ffffffff8181e400 R11: 0000000000000004 R12: 000000000000000f [ 212.676084] R13: ffff8800d94ec840 R14: ffff8800db440c80 R15: 000000000000000e [ 212.676084] FS: 00007f6685a3c700(0000) GS:ffff880116e00000(0000) knlGS:0000000000000000 [ 212.676084] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 212.676084] CR2: 00007f6685ad6460 CR3: 00000000db714000 CR4: 00000000000006f0 [ 212.676084] Stack: [ 212.676084] ffff8800db6ffc00 000000000000000f ffff8800d94ec840 ffff880116e03eb8 [ 212.676084] ffffffffa041509f ffff880116e03e88 0000000f16e03e88 ffff8800d94ec000 [ 212.676084] 00000bd400059858 000000050000000f ffffffff81094c36 ffff880116e03eb8 [ 212.676084] Call Trace: [ 212.676084] <IRQ> [ 212.676084] [<ffffffffa041509f>] cp_interrupt+0x4ef/0x590 [8139cp] [ 212.676084] [<ffffffff81094c36>] ? ktime_get+0x56/0xd0 [ 212.676084] [<ffffffff8108cf73>] handle_irq_event_percpu+0x53/0x170 [ 212.676084] [<ffffffff8108d0cc>] handle_irq_event+0x3c/0x60 [ 212.676084] [<ffffffff8108fdb5>] handle_fasteoi_irq+0x55/0xf0 [ 212.676084] [<ffffffff810045df>] handle_irq+0x1f/0x30 [ 212.676084] [<ffffffff81003c8b>] do_IRQ+0x5b/0xe0 [ 212.676084] [<ffffffff8142beaa>] common_interrupt+0x6a/0x6a [ 212.676084] <EOI> [ 212.676084] [<ffffffffa0416a21>] ? cp_start_xmit+0x621/0x97c [8139cp] [ 212.676084] [<ffffffffa0416a09>] ? cp_start_xmit+0x609/0x97c [8139cp] [ 212.676084] [<ffffffff81378ed9>] dev_hard_start_xmit+0x2c9/0x550 [ 212.676084] [<ffffffff813960a9>] sch_direct_xmit+0x179/0x1d0 [ 212.676084] [<ffffffff813793f3>] dev_queue_xmit+0x293/0x440 [ 212.676084] [<ffffffff813b0e46>] ip_finish_output+0x236/0x450 [ 212.676084] [<ffffffff810e59e7>] ? __alloc_pages_nodemask+0x187/0xb10 [ 212.676084] [<ffffffff813b10e8>] ip_output+0x88/0x90 [ 212.676084] [<ffffffff813afa64>] ip_local_out+0x24/0x30 [ 212.676084] [<ffffffff813aff0d>] ip_queue_xmit+0x14d/0x3e0 [ 212.676084] [<ffffffff813c6fd1>] tcp_transmit_skb+0x501/0x840 [ 212.676084] [<ffffffff813c8323>] tcp_write_xmit+0x1e3/0xb20 [ 212.676084] [<ffffffff81363237>] ? skb_page_frag_refill+0x87/0xd0 [ 212.676084] [<ffffffff813c8c8b>] tcp_push_one+0x2b/0x40 [ 212.676084] [<ffffffff813bb7e6>] tcp_sendmsg+0x926/0xc90 [ 212.676084] [<ffffffff813e1d21>] inet_sendmsg+0x61/0xc0 [ 212.676084] [<ffffffff8135e861>] sock_aio_write+0x101/0x120 [ 212.676084] [<ffffffff81107cf1>] ? vma_adjust+0x2e1/0x5d0 [ 212.676084] [<ffffffff812163e0>] ? timerqueue_add+0x60/0xb0 [ 212.676084] [<ffffffff81130b60>] do_sync_write+0x60/0x90 [ 212.676084] [<ffffffff81130d44>] ? rw_verify_area+0x54/0xf0 [ 212.676084] [<ffffffff81130f66>] vfs_write+0x186/0x190 [ 212.676084] [<ffffffff811317fd>] SyS_write+0x5d/0xa0 [ 212.676084] [<ffffffff814321e2>] system_call_fastpath+0x16/0x1b [ 212.676084] Code: ca 41 89 dc 41 29 cc 45 31 db 29 c2 41 89 c5 89 d0 45 29 c5 f7 d0 c1 e8 1f e9 43 ff ff ff 66 0f 1f 44 00 00 31 c0 e9 7b ff ff ff <0f> 0b eb fe 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 c7 47 40 00 [ 212.676084] RIP [<ffffffff8122e23f>] dql_completed+0x17f/0x190 ------------[ cut here ]------------ When a skb has frags, bytes_compl plus skb->len nr_frags times in cp_tx(). It's not the correct value(actually, it should plus skb->len once) and it will trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed). So only increase bytes_compl when finish sending all frags. pkts_compl also has a wrong value, fix it too. It's introduced by commit 871f0d4c ("8139cp: enable bql"). Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08r8169: check ALDPS bit and disable it if enabled for the 8168gDavid Chang
[ Upstream commit 1bac1072425c86f1ac85bd5967910706677ef8b3 ] Windows driver will enable ALDPS function, but linux driver and firmware do not have any configuration related to ALDPS function for 8168g. So restart system to linux and remove the NIC cable, LAN enter ALDPS, then LAN RX will be disabled. This issue can be easily reproduced on dual boot windows and linux system with RTL_GIGA_MAC_VER_40 chip. Realtek said, ALDPS function can be disabled by configuring to PHY, switch to page 0x0A43, reg0x10 bit2=0. Signed-off-by: David Chang <dchang@suse.com> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08net: rework recvmsg handler msg_name and msg_namelen logicHannes Frederic Sowa
[ Upstream commit f3d3342602f8bcbf37d7c46641cb9bca7618eb1c ] This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08bonding: fix two race conditions in bond_store_updelay/downdelayNikolay Aleksandrov
[ Upstream commit b869ccfab1e324507fa3596e3e1308444fb68227 ] This patch fixes two race conditions between bond_store_updelay/downdelay and bond_store_miimon which could lead to division by zero as miimon can be set to 0 while either updelay/downdelay are being set and thus miss the zero check in the beginning, the zero div happens because updelay/downdelay are stored as new_value / bond->params.miimon. Use rtnl to synchronize with miimon setting. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Veaceslav Falico <vfalico@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08macvtap: limit head length of skb allocatedJason Wang
[ Upstream commit 16a3fa28630331e28208872fa5341ce210b901c7 ] We currently use hdr_len as a hint of head length which is advertised by guest. But when guest advertise a very big value, it can lead to an 64K+ allocating of kmalloc() which has a very high possibility of failure when host memory is fragmented or under heavy stress. The huge hdr_len also reduce the effect of zerocopy or even disable if a gso skb is linearized in guest. To solves those issues, this patch introduces an upper limit (PAGE_SIZE) of the head, which guarantees an order 0 allocation each time. Signed-off-by: Jason Wang <jasowang@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08tuntap: limit head length of skb allocatedJason Wang
[ Upstream commit 96f8d9ecf227638c89f98ccdcdd50b569891976c ] We currently use hdr_len as a hint of head length which is advertised by guest. But when guest advertise a very big value, it can lead to an 64K+ allocating of kmalloc() which has a very high possibility of failure when host memory is fragmented or under heavy stress. The huge hdr_len also reduce the effect of zerocopy or even disable if a gso skb is linearized in guest. To solves those issues, this patch introduces an upper limit (PAGE_SIZE) of the head, which guarantees an order 0 allocation each time. Signed-off-by: Jason Wang <jasowang@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08usbnet: fix status interrupt urb handlingFelix Fietkau
[ Upstream commit 52f48d0d9aaa621ffa5e08d79da99a3f8c93b848 ] Since commit 7b0c5f21f348a66de495868b8df0284e8dfd6bbf "sierra_net: keep status interrupt URB active", sierra_net triggers status interrupt polling before the net_device is opened (in order to properly receive the sync message response). To be able to receive further interrupts, the interrupt urb needs to be re-submitted, so this patch removes the bogus check for netif_running(). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08bonding: don't permit to use ARP monitoring in 802.3ad modeVeaceslav Falico
[ Upstream commit ec9f1d15db8185f63a2c3143dc1e90ba18541b08 ] Currently the ARP monitoring is not supported with 802.3ad, and it's prohibited to use it via the module params. However we still can set it afterwards via sysfs, cause we only check for *LB modes there. To fix this - add a check for 802.3ad mode in bonding_store_arp_interval. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08net/mlx4_en: Fixed crash when port type is changedAmir Vadai
[ Upstream commit 1ec4864b10171b0691ee196d7006ae56d2c153f2 ] timecounter_init() was was called only after first potential timecounter_read(). Moved mlx4_en_init_timestamp() before mlx4_en_init_netdev() Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04xen-netback: fix refcnt unbalance for 3.10Wei Liu
With the introduction of "xen-netback: Don't destroy the netdev until the vif is shut down" (upstream commit id 279f438e36), vif disconnect and free are separated. However in the backported version reference counting code was not correctly modified, and the reset of vif->irq was lost. If frontend goes through vif life cycle more than once the reference counting is skewed. This patch adds back the missing vif->irq reset line. It also moves several lines of the reference counting code to vif_free, so the moved code corresponds to the counterpart in vif_alloc, thus the reference counting is balanced. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04iwl4965: better skb management in rx pathStanislaw Gruszka
commit c1de4a9557d9e25e41fc4ba034b9659152205539 upstream. 4965 version of Eric patch "iwl3945: better skb management in rx path". It fixes several problems : 1) skb->truesize is underestimated. We really consume PAGE_SIZE bytes for a fragment, not the frame length. 2) 128 bytes of initial headroom is a bit low and forces reallocations. 3) We can avoid consuming a full page for small enough frames. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04iwl3945: better skb management in rx pathEric Dumazet
commit 45fe142cefa864b685615bcb930159f6749c3667 upstream. Steinar reported reallocations of skb->head with IPv6, leading to a warning in skb_try_coalesce() It turns out iwl3945 has several problems : 1) skb->truesize is underestimated. We really consume PAGE_SIZE bytes for a fragment, not the frame length. 2) 128 bytes of initial headroom is a bit low and forces reallocations. 3) We can avoid consuming a full page for small enough frames. Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Stewart <pstew@google.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04iwlwifi: don't WARN on host commands sent when firmware is deadEmmanuel Grumbach
commit 8ca95995e64f5d270889badb3e449dca91106a2b upstream. This triggers automatic bug reports and add no valuable information. Print a simple error instead and drop the host command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04prism54: set netdev type to "wlan"Dan Williams
commit 8e3ffa471091c560deb6738ed9ab7445b7a5fd04 upstream. Userspace uses the netdev devtype for stuff like device naming and type detection. Be nice and set it. Remove the pointless #if/#endif around SET_NETDEV_DEV too. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04mwifiex: fix wrong eth_hdr usage for bridged packets in AP modeUjjal Roy
commit 8d93f1f309d38b65fce0b9f0de91ba6c96990c07 upstream. The eth_hdr is never defined in this driver but it gets compiled without any warning/error because kernel has defined eth_hdr. Fix it by defining our own p_ethhdr and use it instead of eth_hdr. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04mwifiex: correct packet length for packets from SDIO interfaceAvinash Patil
commit d03b4aa77e1187b77dfe37d14a923547f00baa66 upstream. While receiving a packet on SDIO interface, we allocate skb with size multiple of SDIO block size. We need to resize this skb after RX using packet length from RX header. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04rt2400pci: fix RSSI readStanislaw Gruszka
commit 2bf127a5cc372b9319afcbae10b090663b621c8b upstream. RSSI value is provided on word3 not on word2. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04rtlwifi: rtl8192cu: Fix incorrect signal strength for unassociated APLarry Finger
commit 78dbfecb95be4635b995af3bd29fa10013409fcd upstream. The routine that processes received frames was returning the RSSI value for the signal strength; however, that value is available only for associated APs. As a result, the strength was the absurd value of 10 dBm. As a result, scans return incorrect values for the strength, which causes unwanted attempts to roam. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04rtlwifi: rtl8192se: Fix incorrect signal strength for unassociated APLarry Finger
commit b4ade797668e33b4e8353c2701ce01d7084dfafa upstream. The routine that processes received frames was returning the RSSI value for the signal strength; however, that value is available only for associated APs. As a result, the strength was the absurd value of 10 dBm. As a result, scans return incorrect values for the strength, which causes unwanted attempts to roam. This patch fixes https://bugzilla.kernel.org/show_bug.cgi?id=63881. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Matthieu Baerts <matttbe@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04rtlwifi: rtl8192de: Fix incorrect signal strength for unassociated APLarry Finger
commit 3545f3d5f4af715c914394123ce7725a9cf0a1c4 upstream. The routine that processes received frames was returning the RSSI value for the signal strength; however, that value is available only for associated APs. As a result, the strength was the absurd value of 10 dBm. As a result, scans return incorrect values for the strength, which causes unwanted attempts to roam. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04rtlwifi: rtl8192cu: Fix more pointer arithmetic errorsLarry Finger
commit eafbdde9c5629bea58df07275c5917eb42afbbe7 upstream. This driver uses a number of macros to get and set various fields in the RX and TX descriptors. To work correctly, a u8 pointer to the descriptor must be used; however, in some cases a descriptor structure pointer is used instead. In addition, a duplicated statement is removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04rtlwifi: rtl8192se: Fix wrong assignmentFelipe Pena
commit 3aef7dde8dcf09e0124f0a2665845a507331972b upstream. There is a typo in the struct member name on assignment when checking rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40, the check uses pwrgroup_ht40 for bound limit and uses pwrgroup_ht20 when assigning instead. Signed-off-by: Felipe Pena <felipensp@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04rtlwifi: Fix endian error in extracting packet typeMark Cave-Ayland
commit 0c5d63f0ab6728f05ddefa25aff55e31297f95e6 upstream. All of the rtlwifi drivers have an error in the routine that tests if the data is "special". If it is, the subsequant transmission will be at the lowest rate to enhance reliability. The 16-bit quantity is big-endian, but was being extracted in native CPU mode. One of the effects of this bug is to inhibit association under some conditions as the TX rate is too high. Based on suggestions by Joe Perches, the entire routine is rewritten. One of the local headers contained duplicates of some of the ETH_P_XXX definitions. These are deleted. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04rtlwifi: rtl8188ee: Fix smatch warning in rtl8188ee/hw.cLarry Finger
commit dab3df5e88b979f8d09860f873ccfaa7a55758d2 upstream. Smatch lists the following: CHECK drivers/net/wireless/rtlwifi/rtl8188ee/hw.c drivers/net/wireless/rtlwifi/rtl8188ee/hw.c:149 _rtl88ee_set_fw_clock_on() info: ignoring unreachable code. drivers/net/wireless/rtlwifi/rtl8188ee/hw.c:149 _rtl88ee_set_fw_clock_on() info: ignoring unreachable code. This info message is the result of a real error due to a missing break statement in a "while (1)" loop. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04can: flexcan: fix flexcan_chip_start() on imx6Marc Kleine-Budde
commit 0d1862ea1a5bb876cf05555a7307080cb75bf379 upstream. In the flexcan_chip_start() function first the flexcan core is going through the soft reset sequence, then the RX FIFO is enabled. With the hardware is put into FIFO mode, message buffers 1...7 are reserved by the FIFO engine. The remaining message buffers are in reset default values. This patch removes the bogus initialization of the message buffers, as it causes an imprecise external abort on imx6. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> [mkl: adjusted context for stable] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29rt2800usb: slow down TX status pollingStanislaw Gruszka
commit 36165fd5b00bf8163f89c21bb16a3e9834555b10 upstream. Polling TX statuses too frequently has two negative effects. First is randomly peek CPU usage, causing overall system functioning delays. Second bad effect is that device is not able to fill TX statuses in H/W register on some workloads and we get lot of timeouts like below: ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2 ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2 ieee80211 phy4: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping This not only cause flood of messages in dmesg, but also bad throughput, since rate scaling algorithm can not work optimally. In the future, we should probably make polling interval be adjusted automatically, but for now just increase values, this make mentioned problems gone. Resolve: https://bugzilla.kernel.org/show_bug.cgi?id=62781 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29rt2x00: fix HT TX descriptor settings regressionStanislaw Gruszka
commit 3d8bfe141be8e5c21261fc63da8e7964d44f2645 upstream. Since: commit 36323f817af0376c78612cfdab714b0feb05fea5 Author: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Date: Mon Jul 23 21:33:42 2012 +0200 mac80211: move TX station pointer and restructure TX we do not pass sta pointer to rt2x00queue_create_tx_descriptor_ht(), hence we do not correctly set station WCID and AMPDU density parameters. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29rt2x00: rt2800lib: fix VGC adjustment for RT5592Gabor Juhos
commit 0beb1bbf19c72f17809e42b8f33522a55c2cc18c upstream. In commit 3d81535ea5940446510a8a5cee1c6ad23c90c753 (rt2800: 5592: add chip specific vgc calculations) the rt2800_link_tuner function has been modified to adjust VGC level for the RT5592 chipset. On the RT5592 chipset, the VGC level must be adjusted only if rssi is greater than -65. However the current code adjusts the VGC value by 0x10 regardless of the actual chipset if the rssi value is between -80 and -65. Fix the broken behaviour by reordering the if-else statements. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29rt2x00: check if device is still available on rt2x00mac_flush()Stanislaw Gruszka
commit 5671ab05cf2a579218985ef56595387932d78ee4 upstream. Fix random kernel panic with below messages when remove dongle. [ 2212.355447] BUG: unable to handle kernel NULL pointer dereference at 0000000000000250 [ 2212.355527] IP: [<ffffffffa02667f2>] rt2x00usb_kick_tx_entry+0x12/0x160 [rt2x00usb] [ 2212.355599] PGD 0 [ 2212.355626] Oops: 0000 [#1] SMP [ 2212.355664] Modules linked in: rt2800usb rt2x00usb rt2800lib crc_ccitt rt2x00lib mac80211 cfg80211 tun arc4 fuse rfcomm bnep snd_hda_codec_realtek snd_hda_intel snd_hda_codec btusb uvcvideo bluetooth snd_hwdep x86_pkg_temp_thermal snd_seq coretemp aesni_intel aes_x86_64 snd_seq_device glue_helper snd_pcm ablk_helper videobuf2_vmalloc sdhci_pci videobuf2_memops videobuf2_core sdhci videodev mmc_core serio_raw snd_page_alloc microcode i2c_i801 snd_timer hid_multitouch thinkpad_acpi lpc_ich mfd_core snd tpm_tis wmi tpm tpm_bios soundcore acpi_cpufreq i915 i2c_algo_bit drm_kms_helper drm i2c_core video [last unloaded: cfg80211] [ 2212.356224] CPU: 0 PID: 34 Comm: khubd Not tainted 3.12.0-rc3-wl+ #3 [ 2212.356268] Hardware name: LENOVO 3444CUU/3444CUU, BIOS G6ET93WW (2.53 ) 02/04/2013 [ 2212.356319] task: ffff880212f687c0 ti: ffff880212f66000 task.ti: ffff880212f66000 [ 2212.356392] RIP: 0010:[<ffffffffa02667f2>] [<ffffffffa02667f2>] rt2x00usb_kick_tx_entry+0x12/0x160 [rt2x00usb] [ 2212.356481] RSP: 0018:ffff880212f67750 EFLAGS: 00010202 [ 2212.356519] RAX: 000000000000000c RBX: 000000000000000c RCX: 0000000000000293 [ 2212.356568] RDX: ffff8801f4dc219a RSI: 0000000000000000 RDI: 0000000000000240 [ 2212.356617] RBP: ffff880212f67778 R08: ffffffffa02667e0 R09: 0000000000000002 [ 2212.356665] R10: 0001f95254ab4b40 R11: ffff880212f675be R12: ffff8801f4dc2150 [ 2212.356712] R13: 0000000000000000 R14: ffffffffa02667e0 R15: 000000000000000d [ 2212.356761] FS: 0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 [ 2212.356813] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2212.356852] CR2: 0000000000000250 CR3: 0000000001a0c000 CR4: 00000000001407f0 [ 2212.356899] Stack: [ 2212.356917] 000000000000000c ffff8801f4dc2150 0000000000000000 ffffffffa02667e0 [ 2212.356980] 000000000000000d ffff880212f677b8 ffffffffa03a31ad ffff8801f4dc219a [ 2212.357038] ffff8801f4dc2150 0000000000000000 ffff8800b93217a0 ffff8801f49bc800 [ 2212.357099] Call Trace: [ 2212.357122] [<ffffffffa02667e0>] ? rt2x00usb_interrupt_txdone+0x90/0x90 [rt2x00usb] [ 2212.357174] [<ffffffffa03a31ad>] rt2x00queue_for_each_entry+0xed/0x170 [rt2x00lib] [ 2212.357244] [<ffffffffa026701c>] rt2x00usb_kick_queue+0x5c/0x60 [rt2x00usb] [ 2212.357314] [<ffffffffa03a3682>] rt2x00queue_flush_queue+0x62/0xa0 [rt2x00lib] [ 2212.357386] [<ffffffffa03a2930>] rt2x00mac_flush+0x30/0x70 [rt2x00lib] [ 2212.357470] [<ffffffffa04edded>] ieee80211_flush_queues+0xbd/0x140 [mac80211] [ 2212.357555] [<ffffffffa0502e52>] ieee80211_set_disassoc+0x2d2/0x3d0 [mac80211] [ 2212.357645] [<ffffffffa0506da3>] ieee80211_mgd_deauth+0x1d3/0x240 [mac80211] [ 2212.357718] [<ffffffff8108b17c>] ? try_to_wake_up+0xec/0x290 [ 2212.357788] [<ffffffffa04dbd18>] ieee80211_deauth+0x18/0x20 [mac80211] [ 2212.357872] [<ffffffffa0418ddc>] cfg80211_mlme_deauth+0x9c/0x140 [cfg80211] [ 2212.357913] [<ffffffffa041907c>] cfg80211_mlme_down+0x5c/0x60 [cfg80211] [ 2212.357962] [<ffffffffa041cd18>] cfg80211_disconnect+0x188/0x1a0 [cfg80211] [ 2212.358014] [<ffffffffa04013bc>] ? __cfg80211_stop_sched_scan+0x1c/0x130 [cfg80211] [ 2212.358067] [<ffffffffa03f8954>] cfg80211_leave+0xc4/0xe0 [cfg80211] [ 2212.358124] [<ffffffffa03f8d1b>] cfg80211_netdev_notifier_call+0x3ab/0x5e0 [cfg80211] [ 2212.358177] [<ffffffff815140f8>] ? inetdev_event+0x38/0x510 [ 2212.358217] [<ffffffff81085a94>] ? __wake_up+0x44/0x50 [ 2212.358254] [<ffffffff8155995c>] notifier_call_chain+0x4c/0x70 [ 2212.358293] [<ffffffff81081156>] raw_notifier_call_chain+0x16/0x20 [ 2212.358361] [<ffffffff814b6dd5>] call_netdevice_notifiers_info+0x35/0x60 [ 2212.358429] [<ffffffff814b6ec9>] __dev_close_many+0x49/0xd0 [ 2212.358487] [<ffffffff814b7028>] dev_close_many+0x88/0x100 [ 2212.358546] [<ffffffff814b8150>] rollback_registered_many+0xb0/0x220 [ 2212.358612] [<ffffffff814b8319>] unregister_netdevice_many+0x19/0x60 [ 2212.358694] [<ffffffffa04d8eb2>] ieee80211_remove_interfaces+0x112/0x190 [mac80211] [ 2212.358791] [<ffffffffa04c585f>] ieee80211_unregister_hw+0x4f/0x100 [mac80211] [ 2212.361994] [<ffffffffa03a1221>] rt2x00lib_remove_dev+0x161/0x1a0 [rt2x00lib] [ 2212.365240] [<ffffffffa0266e2e>] rt2x00usb_disconnect+0x2e/0x70 [rt2x00usb] [ 2212.368470] [<ffffffff81419ce4>] usb_unbind_interface+0x64/0x1c0 [ 2212.371734] [<ffffffff813b446f>] __device_release_driver+0x7f/0xf0 [ 2212.374999] [<ffffffff813b4503>] device_release_driver+0x23/0x30 [ 2212.378131] [<ffffffff813b3c98>] bus_remove_device+0x108/0x180 [ 2212.381358] [<ffffffff813b0565>] device_del+0x135/0x1d0 [ 2212.384454] [<ffffffff81417760>] usb_disable_device+0xb0/0x270 [ 2212.387451] [<ffffffff8140d9cd>] usb_disconnect+0xad/0x1d0 [ 2212.390294] [<ffffffff8140f6cd>] hub_thread+0x63d/0x1660 [ 2212.393034] [<ffffffff8107c860>] ? wake_up_atomic_t+0x30/0x30 [ 2212.395728] [<ffffffff8140f090>] ? hub_port_debounce+0x130/0x130 [ 2212.398412] [<ffffffff8107baa0>] kthread+0xc0/0xd0 [ 2212.401058] [<ffffffff8107b9e0>] ? insert_kthread_work+0x40/0x40 [ 2212.403639] [<ffffffff8155de3c>] ret_from_fork+0x7c/0xb0 [ 2212.406193] [<ffffffff8107b9e0>] ? insert_kthread_work+0x40/0x40 [ 2212.408732] Code: 24 58 08 00 00 bf 80 00 00 00 e8 3a c3 e0 e0 5b 41 5c 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 <48> 8b 47 10 48 89 fb 4c 8b 6f 28 4c 8b 20 49 8b 04 24 4c 8b 30 [ 2212.414671] RIP [<ffffffffa02667f2>] rt2x00usb_kick_tx_entry+0x12/0x160 [rt2x00usb] [ 2212.417646] RSP <ffff880212f67750> [ 2212.420547] CR2: 0000000000000250 [ 2212.441024] ---[ end trace 5442918f33832bce ]--- Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29rt2x00: fix a crash bug in the HT descriptor handling fixFelix Fietkau
commit b4089d6d8e71a7293e2192025dfa507a04f661c4 upstream. Commit "rt2x00: fix HT TX descriptor settings regression" assumes that the control parameter to rt2x00mac_tx is always non-NULL. There is an internal call in rt2x00lib_bc_buffer_iter where NULL is passed. Fix the resulting crash by adding an initialized dummy on-stack ieee80211_tx_control struct. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29can: c_can: Fix RX message handling, handle lost message before EOBMarkus Pargmann
commit 5d0f801a2ccec3b1fdabc3392c8d99ed0413d216 upstream. If we handle end of block messages with higher priority than a lost message, we can run into an endless interrupt loop. This is reproducable with a am335x processor and "cansequence -r" at 1Mbit. As soon as we loose a packet we can't escape from an interrupt loop. This patch fixes the problem by handling lost packets before EOB packets. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29can: kvaser_usb: fix usb endpoints detectionOlivier Sobrie
commit 896e23bd04ea50a146dffd342e2f96180f0812a5 upstream. Some devices, like the Kvaser Memorator Professional, have several bulk in endpoints. Only the first one found must be used by the driver. The same holds for the bulk out endpoint. The official Kvaser driver (leaf) was used as reference for this patch. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29libertas: potential oops in debugfsDan Carpenter
commit a497e47d4aec37aaf8f13509f3ef3d1f6a717d88 upstream. If we do a zero size allocation then it will oops. Also we can't be sure the user passes us a NUL terminated string so I've added a terminator. This code can only be triggered by root. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-20iwlwifi: pcie: add new SKUs for 7000 & 3160 NIC seriesMatti Gottlieb
commit b49926629fb5c324bb1ed3960fb0d7905a4a8562 upstream. Add some new PCI IDs to the table for 7000 & 3160 series Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-20iwlwifi: add new 7260 and 3160 series device IDsOren Givon
commit 93fc64114b994f9ef6901697f9b0de00762680e9 upstream. Add new device IDs and configurations to support all the devices. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-20xen-netback: transition to CLOSED when removing a VIFDavid Vrabel
[ Upstream commit dc62ccaccfb139d9b04bbc5a2688a4402adbfab3 ] If a guest is destroyed without transitioning its frontend to CLOSED, the domain becomes a zombie as netback was not grant unmapping the shared rings. When removing a VIF, transition the backend to CLOSED so the VIF is disconnected if necessary (which will unmap the shared rings etc). This fixes a regression introduced by 279f438e36c0a70b23b86d2090aeec50155034a9 (xen-netback: Don't destroy the netdev until the vif is shut down). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Paul Durrant <Paul.Durrant@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-20xen-netback: Handle backend state transitions in a more robust wayPaul Durrant
[ Upstream commit ea732dff5cfa10789007bf4a5b935388a0bb2a8f ] When the frontend state changes netback now specifies its desired state to a new function, set_backend_state(), which transitions through any necessary intermediate states. This fixes an issue observed with some old Windows frontend drivers where they failed to transition through the Closing state and netback would not behave correctly. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-20net/mlx4_core: Fix call to __mlx4_unregister_macJack Morgenstein
[ Upstream commit c32b7dfbb1dfb3f0a68f250deff65103c8bb704a ] In function mlx4_master_deactivate_admin_state() __mlx4_unregister_mac was called using the MAC index. It should be called with the value of the MAC itself. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-20virtio-net: correctly handle cpu hotplug notifier during resumingJason Wang
[ Upstream commit ec9debbd9a88d8ea86c488d6ffcac419ee7d46d9 ] commit 3ab098df35f8b98b6553edc2e40234af512ba877 (virtio-net: don't respond to cpu hotplug notifier if we're not ready) tries to bypass the cpu hotplug notifier by checking the config_enable and does nothing is it was false. So it need to try to hold the config_lock mutex which may happen in atomic environment which leads the following warnings: [ 622.944441] CPU0 attaching NULL sched-domain. [ 622.944446] CPU1 attaching NULL sched-domain. [ 622.944485] CPU0 attaching NULL sched-domain. [ 622.950795] BUG: sleeping function called from invalid context at kernel/mutex.c:616 [ 622.950796] in_atomic(): 1, irqs_disabled(): 1, pid: 10, name: migration/1 [ 622.950796] no locks held by migration/1/10. [ 622.950798] CPU: 1 PID: 10 Comm: migration/1 Not tainted 3.12.0-rc5-wl-01249-gb91e82d #317 [ 622.950799] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 622.950802] 0000000000000000 ffff88001d42dba0 ffffffff81a32f22 ffff88001bfb9c70 [ 622.950803] ffff88001d42dbb0 ffffffff810edb02 ffff88001d42dc38 ffffffff81a396ed [ 622.950805] 0000000000000046 ffff88001d42dbe8 ffffffff810e861d 0000000000000000 [ 622.950805] Call Trace: [ 622.950810] [<ffffffff81a32f22>] dump_stack+0x54/0x74 [ 622.950815] [<ffffffff810edb02>] __might_sleep+0x112/0x114 [ 622.950817] [<ffffffff81a396ed>] mutex_lock_nested+0x3c/0x3c6 [ 622.950818] [<ffffffff810e861d>] ? up+0x39/0x3e [ 622.950821] [<ffffffff8153ea7c>] ? acpi_os_signal_semaphore+0x21/0x2d [ 622.950824] [<ffffffff81565ed1>] ? acpi_ut_release_mutex+0x5e/0x62 [ 622.950828] [<ffffffff816d04ec>] virtnet_cpu_callback+0x33/0x87 [ 622.950830] [<ffffffff81a42576>] notifier_call_chain+0x3c/0x5e [ 622.950832] [<ffffffff810e86a8>] __raw_notifier_call_chain+0xe/0x10 [ 622.950835] [<ffffffff810c5556>] __cpu_notify+0x20/0x37 [ 622.950836] [<ffffffff810c5580>] cpu_notify+0x13/0x15 [ 622.950838] [<ffffffff81a237cd>] take_cpu_down+0x27/0x3a [ 622.950841] [<ffffffff81136289>] stop_machine_cpu_stop+0x93/0xf1 [ 622.950842] [<ffffffff81136167>] cpu_stopper_thread+0xa0/0x12f [ 622.950844] [<ffffffff811361f6>] ? cpu_stopper_thread+0x12f/0x12f [ 622.950847] [<ffffffff81119710>] ? lock_release_holdtime.part.7+0xa3/0xa8 [ 622.950848] [<ffffffff81135e4b>] ? cpu_stop_should_run+0x3f/0x47 [ 622.950850] [<ffffffff810ea9b0>] smpboot_thread_fn+0x1c5/0x1e3 [ 622.950852] [<ffffffff810ea7eb>] ? lg_global_unlock+0x67/0x67 [ 622.950854] [<ffffffff810e36b7>] kthread+0xd8/0xe0 [ 622.950857] [<ffffffff81a3bfad>] ? wait_for_common+0x12f/0x164 [ 622.950859] [<ffffffff810e35df>] ? kthread_create_on_node+0x124/0x124 [ 622.950861] [<ffffffff81a45ffc>] ret_from_fork+0x7c/0xb0 [ 622.950862] [<ffffffff810e35df>] ? kthread_create_on_node+0x124/0x124 [ 622.950876] smpboot: CPU 1 is now offline [ 623.194556] SMP alternatives: lockdep: fixing up alternatives [ 623.194559] smpboot: Booting Node 0 Processor 1 APIC 0x1 ... A correct fix is to unregister the hotcpu notifier during restore and register a new one in resume. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Wanlong Gao <gaowanlong@cn.fujitsu.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-29 03:25:04 +0000