summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2015-02-20enic: fix rx skb checksumGovindarajulu Varadarajan
[ Upstream commit 17e96834fd35997ca7cdfbf15413bcd5a36ad448 ] Hardware always provides compliment of IP pseudo checksum. Stack expects whole packet checksum without pseudo checksum if CHECKSUM_COMPLETE is set. This causes checksum error in nf & ovs. kernel: qg-19546f09-f2: hw csum failure kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: GF O-------------- 3.10.0-123.8.1.el7.x86_64 #1 kernel: Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.0.080820141339 08/08/2014 kernel: ffff881218f40000 df68243feb35e3a8 ffff881237a43ab8 ffffffff815e237b kernel: ffff881237a43ad0 ffffffff814cd4ca ffff8829ec71eb00 ffff881237a43af0 kernel: ffffffff814c6232 0000000000000286 ffff8829ec71eb00 ffff881237a43b00 kernel: Call Trace: kernel: <IRQ> [<ffffffff815e237b>] dump_stack+0x19/0x1b kernel: [<ffffffff814cd4ca>] netdev_rx_csum_fault+0x3a/0x40 kernel: [<ffffffff814c6232>] __skb_checksum_complete_head+0x62/0x70 kernel: [<ffffffff814c6251>] __skb_checksum_complete+0x11/0x20 kernel: [<ffffffff8155a20c>] nf_ip_checksum+0xcc/0x100 kernel: [<ffffffffa049edc7>] icmp_error+0x1f7/0x35c [nf_conntrack_ipv4] kernel: [<ffffffff814cf419>] ? netif_rx+0xb9/0x1d0 kernel: [<ffffffffa040eb7b>] ? internal_dev_recv+0xdb/0x130 [openvswitch] kernel: [<ffffffffa04c8330>] nf_conntrack_in+0xf0/0xa80 [nf_conntrack] kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffffa049e302>] ipv4_conntrack_in+0x22/0x30 [nf_conntrack_ipv4] kernel: [<ffffffff815005ca>] nf_iterate+0xaa/0xc0 kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffff81500664>] nf_hook_slow+0x84/0x140 kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffff81509dd4>] ip_rcv+0x344/0x380 Hardware verifies IP & tcp/udp header checksum but does not provide payload checksum, use CHECKSUM_UNNECESSARY. Set it only if its valid IP tcp/udp packet. Cc: Jiri Benc <jbenc@redhat.com> Cc: Stefan Assmann <sassmann@redhat.com> Reported-by: Sunil Choudhary <schoudha@redhat.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-02-20tg3: tg3_disable_ints using uninitialized mailbox value to disable interruptsPrashant Sreedharan
[ Upstream commit 05b0aa579397b734f127af58e401a30784a1e315 ] During driver load in tg3_init_one, if the driver detects DMA activity before intializing the chip tg3_halt is called. As part of tg3_halt interrupts are disabled using routine tg3_disable_ints. This routine was using mailbox value which was not initialized (default value is 0). As a result driver was writing 0x00000001 to pci config space register 0, which is the vendor id / device id. This driver bug was exposed because of the commit a7877b17a667 (PCI: Check only the Vendor ID to identify Configuration Request Retry). Also this issue is only seen in older generation chipsets like 5722 because config space write to offset 0 from driver is possible. The newer generation chips ignore writes to offset 0. Also without commit a7877b17a667, for these older chips when a GRC reset is issued the Bootcode would reprogram the vendor id/device id, which is the reason this bug was masked earlier. Fixed by initializing the interrupt mailbox registers before calling tg3_halt. Please queue for -stable. Reported-by: Nils Holland <nholland@tisys.org> Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-02-20can: dev: fix crtlmode_supported checkOliver Hartkopp
commit 9b1087aa5e86448fe6ad40a58964e35f3ba423d5 upstream. When changing flags in the CAN drivers ctrlmode the provided new content has to be checked whether the bits are allowed to be changed. The bits that are to be changed are given as a bitfield in cm->mask. Therefore checking against cm->flags is wrong as the content can hold any kind of values. The iproute2 tool sets the bits in cm->mask and cm->flags depending on the detected command line options. To be robust against bogus user space applications additionally sanitize the provided flags with the provided mask. Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-02-20ath5k: fix hardware queue index assignmentFelix Fietkau
commit 9e4982f6a51a2442f1bb588fee42521b44b4531c upstream. Like with ath9k, ath5k queues also need to be ordered by priority. queue_info->tqi_subtype already contains the correct index, so use it instead of relying on the order of ath5k_hw_setup_tx_queue calls. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-02-20ath9k: fix BE/BK queue orderFelix Fietkau
commit 78063d81d353e10cbdd279c490593113b8fdae1c upstream. Hardware queues are ordered by priority. Use queue index 0 for BK, which has lower priority than BE. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-02-20ath9k_hw: fix hardware queue allocationFelix Fietkau
commit ad8fdccf9c197a89e2d2fa78c453283dcc2c343f upstream. The driver passes the desired hardware queue index for a WMM data queue in qinfo->tqi_subtype. This was ignored in ath9k_hw_setuptxqueue, which instead relied on the order in which the function is called. Reported-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2015-01-01drivers/net: macvtap and tun depend on INETBen Hutchings
commit de11b0e8c569b96c2cf6a811e3805b7aeef498a3 upstream. These drivers now call ipv6_proxy_select_ident(), which is defined only if CONFIG_INET is enabled. However, they have really depended on CONFIG_INET for as long as they have allowed sending GSO packets from userland. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr") Fixes: b9fb9ee07e67 ("macvtap: add GSO/csum offload support") Fixes: 5188cd44c55d ("drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packetsBen Hutchings
commit 5188cd44c55db3e92cd9e77a40b5baa7ed4340f7 upstream. UFO is now disabled on all drivers that work with virtio net headers, but userland may try to send UFO/IPv6 packets anyway. Instead of sending with ID=0, we should select identifiers on their behalf (as we used to). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 916e4cf46d02 ("ipv6: reuse ip6_frag_id from ip6_ufo_append_data") Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: For 3.2, net/ipv6/output_core.c is a completely new file]
2014-12-14can: esd_usb2: fix memory leak on disconnectAlexey Khoroshilov
commit efbd50d2f62fc1f69a3dcd153e63ba28cc8eb27f upstream. It seems struct esd_usb2 dev is not deallocated on disconnect. The patch adds the missing deallocation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-12-14can: dev: avoid calling kfree_skb() from interrupt contextThomas Körper
commit 5247a589c24022ab34e780039cc8000c48f2035e upstream. ikfree_skb() is Called in can_free_echo_skb(), which might be called from (TX Error) interrupt, which triggers the folloing warning: [ 1153.360705] ------------[ cut here ]------------ [ 1153.360715] WARNING: CPU: 0 PID: 31 at net/core/skbuff.c:563 skb_release_head_state+0xb9/0xd0() [ 1153.360772] Call Trace: [ 1153.360778] [<c167906f>] dump_stack+0x41/0x52 [ 1153.360782] [<c105bb7e>] warn_slowpath_common+0x7e/0xa0 [ 1153.360784] [<c158b909>] ? skb_release_head_state+0xb9/0xd0 [ 1153.360786] [<c158b909>] ? skb_release_head_state+0xb9/0xd0 [ 1153.360788] [<c105bc42>] warn_slowpath_null+0x22/0x30 [ 1153.360791] [<c158b909>] skb_release_head_state+0xb9/0xd0 [ 1153.360793] [<c158be90>] skb_release_all+0x10/0x30 [ 1153.360795] [<c158bf06>] kfree_skb+0x36/0x80 [ 1153.360799] [<f8486938>] ? can_free_echo_skb+0x28/0x40 [can_dev] [ 1153.360802] [<f8486938>] can_free_echo_skb+0x28/0x40 [can_dev] [ 1153.360805] [<f849a12c>] esd_pci402_interrupt+0x34c/0x57a [esd402] [ 1153.360809] [<c10a75b5>] handle_irq_event_percpu+0x35/0x180 [ 1153.360811] [<c10a7623>] ? handle_irq_event_percpu+0xa3/0x180 [ 1153.360813] [<c10a7731>] handle_irq_event+0x31/0x50 [ 1153.360816] [<c10a9c7f>] handle_fasteoi_irq+0x6f/0x120 [ 1153.360818] [<c10a9c10>] ? handle_edge_irq+0x110/0x110 [ 1153.360822] [<c1011b61>] handle_irq+0x71/0x90 [ 1153.360823] <IRQ> [<c168152c>] do_IRQ+0x3c/0xd0 [ 1153.360829] [<c1680b6c>] common_interrupt+0x2c/0x34 [ 1153.360834] [<c107d277>] ? finish_task_switch+0x47/0xf0 [ 1153.360836] [<c167c27b>] __schedule+0x35b/0x7e0 [ 1153.360839] [<c10a5334>] ? console_unlock+0x2c4/0x4d0 [ 1153.360842] [<c13df500>] ? n_tty_receive_buf_common+0x890/0x890 [ 1153.360845] [<c10707b6>] ? process_one_work+0x196/0x370 [ 1153.360847] [<c167c723>] schedule+0x23/0x60 [ 1153.360849] [<c1070de1>] worker_thread+0x161/0x460 [ 1153.360852] [<c1090fcf>] ? __wake_up_locked+0x1f/0x30 [ 1153.360854] [<c1070c80>] ? rescuer_thread+0x2f0/0x2f0 [ 1153.360856] [<c1074f01>] kthread+0xa1/0xc0 [ 1153.360859] [<c1680401>] ret_from_kernel_thread+0x21/0x30 [ 1153.360861] [<c1074e60>] ? kthread_create_on_node+0x110/0x110 [ 1153.360863] ---[ end trace 5ff83639cbb74b35 ]--- This patch replaces the kfree_skb() by dev_kfree_skb_any(). Signed-off-by: Thomas Körper <thomas.koerper@esd.eu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-12-14rt2x00: do not align payload on modern H/WStanislaw Gruszka
commit cfd9167af14eb4ec21517a32911d460083ee3d59 upstream. RT2800 and newer hardware require padding between header and payload if header length is not multiple of 4. For historical reasons we also align payload to to 4 bytes boundary, but such alignment is not needed on modern H/W. Patch fixes skb_under_panic problems reported from time to time: https://bugzilla.kernel.org/show_bug.cgi?id=84911 https://bugzilla.kernel.org/show_bug.cgi?id=72471 http://marc.info/?l=linux-wireless&m=139108549530402&w=2 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1087591 Panic happened because we eat 4 bytes of skb headroom on each (re)transmission when sending frame without the payload and the header length not being multiple of 4 (i.e. QoS header has 26 bytes). On such case because paylad_aling=2 is bigger than header_align=0 we increase header_align by 4 bytes. To prevent that we could change the check to: if (payload_length && payload_align > header_align) header_align += 4; but not aligning payload at all is more effective and alignment is not really needed by H/W (that has been tested on OpenWrt project for few years now). Reported-and-tested-by: Antti S. Lankila <alankila@bel.fi> Debugged-by: Antti S. Lankila <alankila@bel.fi> Reported-by: Henrik Asp <solenskiner@gmail.com> Originally-From: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-12-14wireless: rt2x00: add new rt2800usb deviceCyril Brulebois
commit 664d6a792785cc677c2091038ce10322c8d04ae1 upstream. 0x1b75 0xa200 AirLive WN-200USB wireless 11b/g/n dongle References: https://bugs.debian.org/766802 Reported-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz> Signed-off-by: Cyril Brulebois <kibi@debian.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-12-14fix misuses of f_count() in ppp and netlinkAl Viro
commit 24dff96a37a2ca319e75a74d3929b2de22447ca6 upstream. we used to check for "nobody else could start doing anything with that opened file" by checking that refcount was 2 or less - one for descriptor table and one we'd acquired in fget() on the way to wherever we are. That was race-prone (somebody else might have had a reference to descriptor table and do fget() just as we'd been checking) and it had become flat-out incorrect back when we switched to fget_light() on those codepaths - unlike fget(), it doesn't grab an extra reference unless the descriptor table is shared. The same change allowed a race-free check, though - we are safe exactly when refcount is less than 2. It was a long time ago; pre-2.6.12 for ioctl() (the codepath leading to ppp one) and 2.6.17 for sendmsg() (netlink one). OTOH, netlink hadn't grown that check until 3.9 and ppp used to live in drivers/net, not drivers/net/ppp until 3.1. The bug existed well before that, though, and the same fix used to apply in old location of file. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [bwh: Backported to 3.2: drop changes to netlink_mmap_sendmsg()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-12-14rt2800: correct BBP1_TX_POWER_CTRL maskStanislaw Gruszka
commit 01f7feeaf4528bec83798316b3c811701bac5d3e upstream. Two bits control TX power on BBP_R1 register. Correct the mask, otherwise we clear additional bit on BBP_R1 register, what can have unknown, possible negative effect. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-11-05can: at91_can: add missing prepare and unprepare of the clockDavid Dueck
commit e77980e50bc2850599d4d9c0192b67a9ffd6daac upstream. In order to make the driver work with the common clock framework, this patch converts the clk_enable()/clk_disable() to clk_prepare_enable()/clk_disable_unprepare(). While there, add the missing error handling. Signed-off-by: David Dueck <davidcdueck@googlemail.com> Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-11-05can: flexcan: put TX mailbox into TX_INACTIVE mode after tx-completeMarc Kleine-Budde
commit de5944883ebbedbf5adc8497659772f5da7b7d72 upstream. After sending a RTR frame the TX mailbox becomes a RX_EMPTY mailbox. To avoid side effects when the RX-FIFO is full, this patch puts the TX mailbox into TX_INACTIVE mode in the transmission complete interrupt handler. This, of course, leaves a race window between the actual completion of the transmission and the handling of tx-complete interrupt. However this is the best we can do without busy polling the tx complete interrupt. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-11-05can: flexcan: implement workaround for errata ERR005829David Jander
commit 25e924450fcb23c11c07c95ea8964dd9f174652e upstream. This patch implements the workaround mentioned in ERR005829: ERR005829: FlexCAN: FlexCAN does not transmit a message that is enabled to be transmitted in a specific moment during the arbitration process. Workaround: The workaround consists of two extra steps after setting up a message for transmission: Step 8: Reserve the first valid mailbox as an inactive mailbox (CODE=0b1000). If RX FIFO is disabled, this mailbox must be message buffer 0. Otherwise, the first valid mailbox can be found using the "RX FIFO filters" table in the FlexCAN chapter of the chip reference manual. Step 9: Write twice INACTIVE code (0b1000) into the first valid mailbox. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-11-05can: flexcan: correctly initialize mailboxesDavid Jander
commit fc05b884a31dbf259cc73cc856e634ec3acbebb6 upstream. Apparently mailboxes may contain random data at startup, causing some of them being prepared for message reception. This causes overruns being missed or even confusing the IRQ check for trasmitted messages, increasing the transmit counter instead of the error counter. This patch initializes all mailboxes after the FIFO as RX_INACTIVE. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-11-05can: flexcan: mark TX mailbox as TX_INACTIVEMarc Kleine-Budde
commit c32fe4ad3e4861b2bfa1f44114c564935a123dda upstream. This patch fixes the initialization of the TX mailbox. It is now correctly initialized as TX_INACTIVE not RX_EMPTY. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-11-05Revert "iwlwifi: dvm: don't enable CTS to self"Emmanuel Grumbach
commit f47f46d7b09cf1d09e4b44b6cc4dd7d68a08028c upstream. This reverts commit 43d826ca5979927131685cc2092c7ce862cb91cd. This commit caused packet loss. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [bwh: Backported to 3.2: - Adjust filename - Condition for RXON_FLG_SELF_CTS_EN in iwlagn_commit_rxon() was different] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-11-05rtlwifi: rtl8192cu: Add new IDLarry Finger
commit c66517165610b911e4c6d268f28d8c640832dbd1 upstream. The Sitecom WLA-2102 adapter uses this driver. Reported-by: Nico Baggus <nico-linux@noci.xs4all.nl> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Nico Baggus <nico-linux@noci.xs4all.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-09-13macvlan: Initialize vlan_features to turn on offload support.Vlad Yasevich
[ Upstream commit 081e83a78db9b0ae1f5eabc2dedecc865f509b98 ] Macvlan devices do not initialize vlan_features. As a result, any vlan devices configured on top of macvlans perform very poorly. Initialize vlan_features based on the vlan features of the lower-level device. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-09-13inetpeer: get rid of ip_id_countEric Dumazet
[ Upstream commit 73f156a6e8c1074ac6327e0abd1169e95eb66463 ] Ideally, we would need to generate IP ID using a per destination IP generator. linux kernels used inet_peer cache for this purpose, but this had a huge cost on servers disabling MTU discovery. 1) each inet_peer struct consumes 192 bytes 2) inetpeer cache uses a binary tree of inet_peer structs, with a nominal size of ~66000 elements under load. 3) lookups in this tree are hitting a lot of cache lines, as tree depth is about 20. 4) If server deals with many tcp flows, we have a high probability of not finding the inet_peer, allocating a fresh one, inserting it in the tree with same initial ip_id_count, (cf secure_ip_id()) 5) We garbage collect inet_peer aggressively. IP ID generation do not have to be 'perfect' Goal is trying to avoid duplicates in a short period of time, so that reassembly units have a chance to complete reassembly of fragments belonging to one message before receiving other fragments with a recycled ID. We simply use an array of generators, and a Jenkin hash using the dst IP as a key. ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it belongs (it is only used from this file) secure_ip_id() and secure_ipv6_id() no longer are needed. Rename ip_select_ident_more() to ip_select_ident_segs() to avoid unnecessary decrement/increment of the number of segments. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-09-13carl9170: fix sending URBs with wrong type when using full-speedRonald Wahl
commit 671796dd96b6cd85b75fba9d3007bcf7e5f7c309 upstream. The driver assumes that endpoint 4 is always an interrupt endpoint. Unfortunately the type differs between high-speed and full-speed configurations while in the former case it is indeed an interrupt endpoint this is not true for the latter case - here it is a bulk endpoint. When sending URBs with the wrong type the kernel will generate a warning message including backtrace. In this specific case there will be a huge amount of warnings which can bring the system to freeze. To fix this we are now sending URBs to endpoint 4 using the type found in the endpoint descriptor. A side note: The carl9170 firmware currently specifies endpoint 4 as interrupt endpoint even in the full-speed configuration but this has no relevance because before this firmware is loaded the endpoint type is as described above and after the firmware is running the stick is not reenumerated and so the old descriptor is used. Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-08-06sunvnet: clean up objects created in vnet_new() on vnet_exit()Sowmini Varadhan
[ Upstream commit a4b70a07ed12a71131cab7adce2ce91c71b37060 ] Nothing cleans up the objects created by vnet_new(), they are completely leaked. vnet_exit(), after doing the vio_unregister_driver() to clean up ports, should call a helper function that iterates over vnet_list and cleans up those objects. This includes unregister_netdevice() as well as free_netdev(). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> Reviewed-by: Karl Volz <karl.volz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-08-06igb: do a reset on SR-IOV re-init if device is downStefan Assmann
commit 76252723e88681628a3dbb9c09c963e095476f73 upstream. To properly re-initialize SR-IOV it is necessary to reset the device even if it is already down. Not doing this may result in Tx unit hangs. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-08-06iwlwifi: dvm: don't enable CTS to selfEmmanuel Grumbach
commit 43d826ca5979927131685cc2092c7ce862cb91cd upstream. We should always prefer to use full RTS protection. Using CTS to self gives a meaningless improvement, but this flow is much harder for the firmware which is likely to have issues with it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [bwh: Backported to 3.2: - Adjust filename - Condition for RXON_FLG_SELF_CTS_EN in iwlagn_commit_rxon() was different] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-08-06mwifiex: fix Tx timeout issueAmitkumar Karwar
commit d76744a93246eccdca1106037e8ee29debf48277 upstream. https://bugzilla.kernel.org/show_bug.cgi?id=70191 https://bugzilla.kernel.org/show_bug.cgi?id=77581 It is observed that sometimes Tx packet is downloaded without adding driver's txpd header. This results in firmware parsing garbage data as packet length. Sometimes firmware is unable to read the packet if length comes out as invalid. This stops further traffic and timeout occurs. The root cause is uninitialized fields in tx_info(skb->cb) of packet used to get garbage values. In this case if MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd header was skipped. This patch makes sure that tx_info is correctly initialized to fix the problem. Reported-by: Andrew Wiley <wiley.andrew.j@gmail.com> Reported-by: Linus Gasser <list@markas-al-nour.org> Reported-by: Michael Hirsch <hirsch@teufel.de> Tested-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-07-11net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()Wei Yang
[ Upstream commit befdf8978accecac2e0739e6b5075afc62db37fe ] This patch wrap up a helper function __mlx4_remove_one() which does the tear down function but preserve the drv_data. Functions like mlx4_pci_err_detected() and mlx4_restart_one() will call this one with out releasing drvdata. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-07-11mlx4_core: Stash PCI ID driver_data in mlx4_priv structureWei Yang
[ No upstream commit, this is a cherry picked backport enabler. ] That way we can check flags later on, when we've finished with the pci_device_id structure. This is a backport. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-07-11b43: fix frequency reported on G-PHY with /new/ firmwareRafał Miłecki
commit 2fc68eb122c7ea6cd5be1fe7d6650c0beb2f4f40 upstream. Support for firmware rev 508+ was added years ago, but we never noticed it reports channel in a different way for G-PHY devices. Instead of offset from 2400 MHz it simply passes channel id (AKA hw_value). So far it was (most probably) affecting monitor mode users only, but the following recent commit made it noticeable for quite everybody: commit 3afc2167f60a327a2c1e1e2600ef209a3c2b75b7 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Mar 4 16:50:13 2014 +0200 cfg80211/mac80211: ignore signal if the frame was heard on wrong channel Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-07-11rt2x00: disable TKIP on USBStanislaw Gruszka
commit 8edcb0ba0d56f5914eef11eda6db8bfe74eb9ca8 upstream. On USB we can not get atomically TKIP key. We have to disable support for TKIP acceleration on USB hardware to avoid bug as showed bellow. [ 860.827243] BUG: scheduling while atomic: hostapd/3397/0x00000002 <snip> [ 860.827280] Call Trace: [ 860.827282] [<ffffffff81682ea6>] dump_stack+0x4d/0x66 [ 860.827284] [<ffffffff8167eb9b>] __schedule_bug+0x47/0x55 [ 860.827285] [<ffffffff81685bb3>] __schedule+0x733/0x7b0 [ 860.827287] [<ffffffff81685c59>] schedule+0x29/0x70 [ 860.827289] [<ffffffff81684f8a>] schedule_timeout+0x15a/0x2b0 [ 860.827291] [<ffffffff8105ac50>] ? ftrace_raw_event_tick_stop+0xc0/0xc0 [ 860.827294] [<ffffffff810c13c2>] ? __module_text_address+0x12/0x70 [ 860.827296] [<ffffffff81686823>] wait_for_completion_timeout+0xb3/0x140 [ 860.827298] [<ffffffff81080fc0>] ? wake_up_state+0x20/0x20 [ 860.827301] [<ffffffff814d5b3d>] usb_start_wait_urb+0x7d/0x150 [ 860.827303] [<ffffffff814d5cd5>] usb_control_msg+0xc5/0x110 [ 860.827305] [<ffffffffa02fb0c6>] rt2x00usb_vendor_request+0xc6/0x160 [rt2x00usb] [ 860.827307] [<ffffffffa02fb215>] rt2x00usb_vendor_req_buff_lock+0x75/0x150 [rt2x00usb] [ 860.827309] [<ffffffffa02fb393>] rt2x00usb_vendor_request_buff+0xa3/0xe0 [rt2x00usb] [ 860.827311] [<ffffffffa023d1a3>] rt2x00usb_register_multiread+0x33/0x40 [rt2800usb] [ 860.827314] [<ffffffffa05805f9>] rt2800_get_tkip_seq+0x39/0x50 [rt2800lib] [ 860.827321] [<ffffffffa0480f88>] ieee80211_get_key+0x218/0x2a0 [mac80211] [ 860.827322] [<ffffffff815cc68c>] ? __nlmsg_put+0x6c/0x80 [ 860.827329] [<ffffffffa051b02e>] nl80211_get_key+0x22e/0x360 [cfg80211] Reported-and-tested-by: Peter Wu <lekensteyn@gmail.com> Reported-and-tested-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-06-09can: peak_pci: prevent use after free at netdev removalStephane Grosjean
commit 0b5a958cf4df3a5cd578b861471e62138f55c85e upstream. As remarked by Christopher R. Baker in his post at http://marc.info/?l=linux-can&m=139707295706465&w=2 there's a possibility for an use after free condition at device removal. This simplified patch introduces an additional variable to prevent the issue. Thanks for catching this. Reported-by: Christopher R. Baker <cbaker@rec.ri.cmu.edu> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-06-09can: peak_pci: Fix the way channels are linked togetherStephane Grosjean
commit 29830406415c227a54af429d7b300aabd4754237 upstream. Change the way channels objects are linked together by peak_pci_probe() avoiding any kernel oops when driver is removed. Side effect is that the list is now browsed from last to first channel. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-06-09rtl8192cu: Fix unbalanced irq enable in error path of rtl92cu_hw_init()Ben Hutchings
commit 3234f5b06fc3094176a86772cc64baf3decc98fc upstream. Fixes: a53268be0cb9 ('rtlwifi: rtl8192cu: Fix too long disable of IRQs') Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context]
2014-06-09rtlwifi: rtl8192cu: Fix too long disable of IRQsLarry Finger
commit a53268be0cb9763f11da4f6fe3fb924cbe3a7d4a upstream. In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi: rtl8192ce: Fix too long disable of IRQs", Olivier Langlois <olivier@trillion01.com> fixed a problem caused by an extra long disabling of interrupts. This patch makes the same fix for rtl8192cu. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-06-09rt2x00: fix beaconing on USBStanislaw Gruszka
commit 8834d3608cc516f13e2e510f4057c263f3d2ce42 upstream. When disable beaconing we clear register with beacon and newer set it back, what make we stop send beacons infinitely. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-06-09skb: Add inline helper for getting the skb end offset from headAlexander Duyck
[ Upstream commit ec47ea82477404631d49b8e568c71826c9b663ac ] With the recent changes for how we compute the skb truesize it occurs to me we are probably going to have a lot of calls to skb_end_pointer - skb->head. Instead of running all over the place doing that it would make more sense to just make it a separate inline skb_end_offset(skb) that way we can return the correct value without having gcc having to do all the optimization to cancel out skb->head - skb->head. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-06-09macvlan: Don't propagate IFF_ALLMULTI changes on down interfaces.Peter Christensen
[ Upstream commit bbeb0eadcf9fe74fb2b9b1a6fea82cd538b1e556 ] Clearing the IFF_ALLMULTI flag on a down interface could cause an allmulti overflow on the underlying interface. Attempting the set IFF_ALLMULTI on the underlying interface would cause an error and the log message: "allmulti touches root, set allmulti failed." Signed-off-by: Peter Christensen <pch@ordbogen.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-06-09Revert "macvlan : fix checksums error when we are in bridge mode"Vlad Yasevich
[ Upstream commit f114890cdf84d753f6b41cd0cc44ba51d16313da ] This reverts commit 12a2856b604476c27d85a5f9a57ae1661fc46019. The commit above doesn't appear to be necessary any more as the checksums appear to be correctly computed/validated. Additionally the above commit breaks kvm configurations where one VM is using a device that support checksum offload (virtio) and the other VM does not. In this case, packets leaving virtio device will have CHECKSUM_PARTIAL set. The packets is forwarded to a macvtap that has offload features turned off. Since we use CHECKSUM_UNNECESSARY, the host does does not update the checksum and thus a bad checksum is passed up to the guest. CC: Daniel Lezcano <daniel.lezcano@free.fr> CC: Patrick McHardy <kaber@trash.net> CC: Andrian Nord <nightnord@gmail.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-06-09tg3: update rx_jumbo_pending ring param only when jumbo frames are enabledIvan Vecera
commit ba67b510035141bd89b40bf65efa0a79834311ca upstream. The patch fixes a problem with dropped jumbo frames after usage of 'ethtool -G ... rx'. Scenario: 1. ip link set eth0 up 2. ethtool -G eth0 rx N # <- This zeroes rx-jumbo 3. ip link set mtu 9000 dev eth0 The ethtool command set rx_jumbo_pending to zero so any received jumbo packets are dropped and you need to use 'ethtool -G eth0 rx-jumbo N' to workaround the issue. The patch changes the logic so rx_jumbo_pending value is changed only if jumbo frames are enabled (MTU > 1500). Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-06-09bonding: Remove debug_fs files when module init failsThomas Richter
[ Upstream commit db29868653394937037d71dc3545768302dda643 ] Remove the bonding debug_fs entries when the module initialization fails. The debug_fs entries should be removed together with all other already allocated resources. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-05-18rtl8192ce: Fix null dereference in watchdogBen Hutchings
Dmitry Semyonov reported that after upgrading from 3.2.54 to 3.2.57 the rtl8192ce driver will crash when its interface is brought up. The oops message shows: [ 1833.611397] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 1833.611455] IP: [<ffffffffa0410c6a>] rtl92ce_update_hal_rate_tbl+0x29/0x4db [rtl8192ce] ... [ 1833.613326] Call Trace: [ 1833.613346] [<ffffffffa02ad9c6>] ? rtl92c_dm_watchdog+0xd0b/0xec9 [rtl8192c_common] [ 1833.613391] [<ffffffff8105b5cf>] ? process_one_work+0x161/0x269 [ 1833.613425] [<ffffffff8105c598>] ? worker_thread+0xc2/0x145 [ 1833.613458] [<ffffffff8105c4d6>] ? manage_workers.isra.25+0x15b/0x15b [ 1833.613496] [<ffffffff8105f6d9>] ? kthread+0x76/0x7e [ 1833.613527] [<ffffffff81356b74>] ? kernel_thread_helper+0x4/0x10 [ 1833.613563] [<ffffffff8105f663>] ? kthread_worker_fn+0x139/0x139 [ 1833.613598] [<ffffffff81356b70>] ? gs_change+0x13/0x13 Disassembly of rtl92ce_update_hal_rate_tbl() shows that the 'sta' parameter was null. None of the changes to the rtlwifi family between 3.2.54 and 3.2.57 seem to directly cause this, and reverting commit f78bccd79ba3 ('rtlwifi: rtl8192ce: Fix too long disable of IRQs') doesn't fix it. rtl92c_dm_watchdog() calls rtl92ce_update_hal_rate_tbl() via rtl92c_dm_refresh_rate_adaptive_mask(), which does not appear in the call trace as it was inlined. That function has been completely removed upstream which may explain why this crash wasn't seen there. I'm not sure that it is sensible to completely remove rtl92c_dm_refresh_rate_adaptive_mask() without making other compensating changes elsewhere, so try to work around this for 3.2 by checking for a null pointer in rtl92c_dm_refresh_rate_adaptive_mask() and then skipping the call to rtl92ce_update_hal_rate_tbl(). References: https://bugs.debian.org/745137 References: https://bugs.debian.org/745462 Reported-by: Dmitry Semyonov <linulin@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn>
2014-05-18mlx4_en: don't use napi_synchronize inside mlx4_en_netpollChris Mason
commit c98235cb8584a72e95786e17d695a8e5fafcd766 upstream. The mlx4 driver is triggering schedules while atomic inside mlx4_en_netpoll: spin_lock_irqsave(&cq->lock, flags); napi_synchronize(&cq->napi); ^^^^^ msleep here mlx4_en_process_rx_cq(dev, cq, 0); spin_unlock_irqrestore(&cq->lock, flags); This was part of a patch by Alexander Guller from Mellanox in 2011, but it still isn't upstream. Signed-off-by: Chris Mason <clm@fb.com> Acked-By: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-04-30b43: Fix machine check error due to improper access of B43_MMIO_PSM_PHY_HDRRafał Miłecki
commit 12cd43c6ed6da7bf7c5afbd74da6959cda6d056b upstream. Register B43_MMIO_PSM_PHY_HDR is 16 bit one, so accessing it with 32b functions isn't safe. On my machine it causes delayed (!) CPU exception: Disabling lock debugging due to kernel taint mce: [Hardware Error]: CPU 0: Machine Check Exception: 4 Bank 4: b200000000070f0f mce: [Hardware Error]: TSC 164083803dc mce: [Hardware Error]: PROCESSOR 2:20fc2 TIME 1396650505 SOCKET 0 APIC 0 microcode 0 mce: [Hardware Error]: Run the above through 'mcelog --ascii' mce: [Hardware Error]: Machine check: Processor context corrupt Kernel panic - not syncing: Fatal machine check on current CPU Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-04-30ath9k: fix ready time of the multicast buffer queueFelix Fietkau
commit 3b3e0efb5c72c4fc940af50b33626b8a78a907dc upstream. qi->tqi_readyTime is written directly to registers that expect microseconds as unit instead of TU. When setting the CABQ ready time, cur_conf->beacon_interval is in TU, so convert it to microseconds before passing it to ath9k_hw. This should hopefully fix some Tx DMA issues with buffered multicast frames in AP mode. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-04-30iwlwifi: dvm: take mutex when sending SYNC BT config commandEmmanuel Grumbach
commit 82e5a649453a3cf23516277abb84273768a1592b upstream. There is a flow in which we send the host command in SYNC mode, but we don't take priv->mutex. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1046495 Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [bwh: Backported to 3.2: - Adjust filename, context - mutex is priv->shrd->mutex] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-04-30rtlwifi: rtl8192se: Fix too long disable of IRQsLarry Finger
commit 2610decdd0b3808ba20471a999835cfee5275f98 upstream. In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi: rtl8192ce: Fix too long disable of IRQs", Olivier Langlois <olivier@trillion01.com> fixed a problem caused by an extra long disabling of interrupts. This patch makes the same fix for rtl8192se. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: - Adjust context - Drop change to an error path that we don't have] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-04-30xen-netback: remove pointless clause from if statementPaul Durrant
[ Upstream commit 0576eddf24df716d8570ef8ca11452a9f98eaab2 ] This patch removes a test in start_new_rx_buffer() that checks whether a copy operation is less than MAX_BUFFER_OFFSET in length, since MAX_BUFFER_OFFSET is defined to be PAGE_SIZE and the only caller of start_new_rx_buffer() already limits copy operations to PAGE_SIZE or less. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Reported-By: Sander Eikelenboom <linux@eikelenboom.it> Tested-By: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-04-09net: asix: add missing flag to struct driver_infoEmil Goode
commit d43ff4cd798911736fb39025ec8004284b1b0bc2 upstream. The struct driver_info ax88178_info is assigned the function asix_rx_fixup_common as it's rx_fixup callback. This means that FLAG_MULTI_PACKET must be set as this function is cloning the data and calling usbnet_skb_return. Not setting this flag leads to usbnet_skb_return beeing called a second time from within the rx_process function in the usbnet module. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 07:18:51 +0000