summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2012-06-01rtlwifi: rtl8192de: Fix firmware initializationLarry Finger
commit 0298dc9f2273fb2d596ae10d7700f054bfce601d upstream. Before the switch to asynchronous firmware loading (mainline commit b0302ab), it was necessary to load firmware when initializing the first of the units in a dual-mac system. After the change, it is necessary to load firmware in both units. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-01rtlwifi: fix for race condition when firmware is cachedLarry Finger
commit 574e02abaf816b582685805f0c1150ca9f1f18ee upstream. In commit b0302ab, the rtlwifi family of drivers was converted to use asynchronous firmware loading. Unfortumately, the implementation was racy, and the ieee80211 routines could be started before rtl_init_core() was called to setup the data. This patch fixes the bug noted in https://bugzilla.kernel.org/show_bug.cgi?id=43187. Reported-by: Joshua Roys <Joshua.Roys@gtri.gatech.edu> Tested-by: Neptune Ning <frostyplanet@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-01b43legacy: Fix error due to MMIO access with SSB unpoweredLarry Finger
commit 8f4b20388fa77226a3605627a33a23f90d559e50 upstream. There is a dummy read of a PCI MMIO register that occurs before the SSB bus has been powered, which is an error. This bug has not been seen earlier, but was apparently exposed when udev was updated to version 182. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21dl2k: Clean up rio_ioctlJeff Mahoney
commit 1bb57e940e1958e40d51f2078f50c3a96a9b2d75 upstream. The dl2k driver's rio_ioctl call has a few issues: - No permissions checking - Implements SIOCGMIIREG and SIOCGMIIREG using the SIOCDEVPRIVATE numbers - Has a few ioctls that may have been used for debugging at one point but have no place in the kernel proper. This patch removes all but the MII ioctls, renumbers them to use the standard ones, and adds the proper permission check for SIOCSMIIREG. We can also get rid of the dl2k-specific struct mii_data in favor of the generic struct mii_ioctl_data. Since we have the phyid on hand, we can add the SIOCGMIIPHY ioctl too. Most of the MII code for the driver could probably be converted to use the generic MII library but I don't have a device to test the results. Reported-by: Stephan Mueller <stephan.mueller@atsec.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21e1000: Prevent reset task killing itself.Tushar Dave
commit 8ce6909f77ba1b7bcdea65cc2388fd1742b6d669 upstream. Killing reset task while adapter is resetting causes deadlock. Only kill reset task if adapter is not resetting. Ref bug #43132 on bugzilla.kernel.org Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21cdc_ether: add Novatel USB551L device IDs for FLAG_WWANDan Williams
commit 4e6304b8420aba5311ba21fd68dab2924ae4d91a upstream. Needs to be tagged with FLAG_WWAN, which since it has generic descriptors, won't happen if we don't override the generic driver info. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable@vger.kernel.org Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21cdc_ether: Ignore bogus union descriptor for RNDIS devicesBjørn Mork
commit 6eddcb4c82883451aec3be1240f17793370fa62f upstream. Some RNDIS devices include a bogus CDC Union descriptor pointing to non-existing interfaces. The RNDIS code is already prepared to handle devices without a CDC Union descriptor by hardwiring the driver to use interfaces 0 and 1, which is correct for the devices with the bogus descriptor as well. So we can reuse the existing workaround. Cc: Markus Kolb <linux-201011@tower-net.de> Cc: Iker Salmón San Millán <shaola@esdebian.org> Cc: Jonathan Nieder <jrnieder@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: 655387@bugs.debian.org Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21usbnet: fix skb traversing races during unlink(v2)Ming Lei
commit 5b6e9bcdeb65634b4ad604eb4536404bbfc62cfa upstream. Commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d(net/usbnet: avoid recursive locking in usbnet_stop()) fixes the recursive locking problem by releasing the skb queue lock before unlink, but may cause skb traversing races: - after URB is unlinked and the queue lock is released, the refered skb and skb->next may be moved to done queue, even be released - in skb_queue_walk_safe, the next skb is still obtained by next pointer of the last skb - so maybe trigger oops or other problems This patch extends the usage of entry->state to describe 'start_unlink' state, so always holding the queue(rx/tx) lock to change the state if the referd skb is in rx or tx queue because we need to know if the refered urb has been started unlinking in unlink_urbs. The other part of this patch is based on Huajun's patch: always traverse from head of the tx/rx queue to get skb which is to be unlinked but not been started unlinking. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-12tg3: Avoid panic from reserved statblk field accessMatt Carlson
[ Upstream commit f891ea1634ce41f5f47ae40d8594809f4cd2ca66 ] When RSS is enabled, interrupt vector 0 does not receive any rx traffic. The rx producer index fields for vector 0's status block should be considered reserved in this case. This patch changes the code to respect these reserved fields, which avoids a kernel panic when these fields take on non-zero values. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-12sungem: Fix WakeOnLanGerard Lledo
[ Upstream commit 5a8887d39e1ba5ee2d4ccb94b14d6f2dce5ddfca ] WakeOnLan was broken in this driver because gp->asleep_wol is a 1-bit bitfield and it was being assigned WAKE_MAGIC, which is (1 << 5). gp->asleep_wol remains 0 and the machine never wakes up. Fixed by casting gp->wake_on_lan to bool. Tested on an iBook G4. Signed-off-by: Gerard Lledo <gerard.lledo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-12sky2: fix receive length error in mixed non-VLAN/VLAN trafficstephen hemminger
[ Upstream commit e072b3fad5f3915102c94628b4971f52ff99dd05 ] Bug: The VLAN bit of the MAC RX Status Word is unreliable in several older supported chips. Sometimes the VLAN bit is not set for valid VLAN packets and also sometimes the VLAN bit is set for non-VLAN packets that came after a VLAN packet. This results in a receive length error when VLAN hardware tagging is enabled. Fix: Variation on original fix proposed by Mirko. The VLAN information is decoded in the status loop, and can be applied to the received SKB there. This eliminates the need for the separate tag field in the interface data structure. The tag has to be copied and cleared if packet is copied. This version checked out with vlan and normal traffic. Note: vlan_tx_tag_present should be renamed vlan_tag_present, but that is outside scope of this. Reported-by: Mirko Lindner <mlindner@marvell.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-12sky2: propogate rx hash when packet is copiedstephen hemminger
[ Upstream commit 3f42941b5d1d13542b1a755a9e4f633aa72e4d3e ] When a small packet is received, the driver copies it to a new skb to allow reusing the full size Rx buffer. The copy was propogating the checksum offload but not the receive hash information. The bug is impact was mostly harmless and therefore not observed until reviewing this area of code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-12asix: Fix tx transfer padding for full-speed USBIngo van Lil
[ Upstream commit 2a5809499e35b53a6044fd34e72b242688b7a862 ] The asix.c USB Ethernet driver avoids ending a tx transfer with a zero- length packet by appending a four-byte padding to transfers whose length is a multiple of maxpacket. However, the hard-coded 512 byte maxpacket length is valid for high-speed USB only; full-speed USB uses 64 byte packets. Signed-off-by: Ingo van Lil <inguin@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-12e1000: fix vlan processing regressionJiri Pirko
commit 52f5509fe8ccb607ff9b84ad618f244262336475 upstream. This patch fixes a regression introduced by commit "e1000: do vlan cleanup (799d531)". Apparently some e1000 chips (not mine) are sensitive about the order of setting vlan filter and vlan stripping/inserting functionality. So this patch changes the order so it's the same as before vlan cleanup. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Tested-by: Ben Greear <greearb@candelatech.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: David Ward <david.ward@ll.mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-12smsc95xx: mark link down on startup and let PHY interrupt deal with carrier ↵Paolo Pisati
changes commit 07d69d4238418746a7b85c5d05ec17c658a2a390 upstream. Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Tested on my Beagle XM. v2: added mantainer to the list of recipient Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07iwlwifi: use 6000G2B for 6030 device seriesWey-Yi Guy
commit 1ed2ec37b44e86eaa8e0a03b908a39c80f65ee45 upstream. "iwlwifi: use correct released ucode version" change the ucode api ok from 6000G2 to 6000G2B, but it shall belong to 6030 device series, not the 6005 device series. Fix it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07iwlwifi: fix hardware queue programmingJohannes Berg
commit 5ef4acd58ab2abd0dd0c8e3cacd61a0dc5d73646 upstream. Newer devices have 20 (5000 series) or 30 (6000 series) hardware queues, rather than the 16 that 4965 had. This was added to the driver a long time ago, but improperly: the queue registers for the higher queues aren't just continuations of the registers for the first 16 queues, they are in other places. Therefore, the hardware would lock up when trying to activate queue 16 or above and the device would have to be restarted. Thanks goes to Emmanuel who identified this and told me how the queue programming should be done. Note that we don't use queues 20 and higher today and doing so needs more work than this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07iwlwifi: use correct released ucode versionMeenakshi Venkataraman
commit 78cbcf2b9dbe0565820dc7721316f9c401000a68 upstream. Report correctly the latest released version of the iwlwifi firmware for all iwlwifi-supported devices. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07iwlwifi: do not nulify ctx->vif on resetStanislaw Gruszka
commit 8db4c7e25d153fb049e81715d72fa3be3a0c3b69 upstream. ctx->vif is dereferenced in different part of iwlwifi code, so do not nullify it. This should address at least one of the possible reasons of WARNING at iwlagn_mac_remove_interface, and perhaps some random crashes when firmware reset is performed. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07wl1251: fix crash on remove due to leftover work itemGrazvydas Ignotas
commit 4c1bcdb5a3354b250b82a67549f57ac27a3bb85f upstream. This driver currently leaves elp_work behind when stopping, which occasionally results in data corruption because work function ends up accessing freed memory, typical symptoms of this are various worker_thread crashes. Fix it by cancelling elp_work. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07wl1251: fix crash on remove due to premature kfreeGrazvydas Ignotas
commit 328c32f0f85467af5a6c4c3289e168d9ad2555af upstream. Currently SDIO glue frees it's own structure before calling wl1251_free_hw(), which in turn calls ieee80211_unregister_hw(). The later call may result in a need to communicate with the chip to stop it (as it happens now if the interface is still up before rmmod), which means calls are made back to the glue, resulting in freed memory access. Fix this by freeing glue data last. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07rtlwifi: Fix oops on unloadLarry Finger
commit 44eb65cfd8da4b9c231238998729e858e963a980 upstream. Under some circumstances, a PCI-based driver reports the following OOPs: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Oops: 0000 [#1] SMP --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Pid: 19627, comm: rmmod Not tainted 3.2.9-2.fc16.x86_64 #1 LENOVO 05962RU/05962RU Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RIP: 0010:[<ffffffffa0418d39>] [<ffffffffa0418d39>] rtl92ce_get_desc+0x19/0xd0 [rtl8192ce] --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Process rmmod (pid: 19627, threadinfo ffff880050262000, task ffff8801156d5cc0) Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Stack: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] 0000000000000002 ffff8801176c2540 ffff880050263ca8 ffffffffa03348e7 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] 0000000000000282 0000000180150014 ffff880050263fd8 ffff8801176c2810 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] ffff880050263bc8 ffffffff810550e2 00000000000002c0 ffff8801176c0d40 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Call Trace: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] [<ffffffffa03348e7>] _rtl_pci_rx_interrupt+0x187/0x650 [rtlwifi] --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Code: ff 09 d0 89 07 48 83 c4 08 5b 5d c3 66 0f 1f 44 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 40 84 f6 89 d3 74 13 84 d2 75 57 <8b> 07 48 83 c4 08 5b 5d c1 e8 1f c3 0f 1f 00 84 d2 74 ed 80 fa Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RIP [<ffffffffa0418d39>] rtl92ce_get_desc+0x19/0xd0 [rtl8192ce] Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RSP <ffff880050263b58> Mar 19 08:14:35 kvothe kernel: [ 6584.626011] CR2: 00000000000006e0 Mar 19 08:14:35 kvothe kernel: [ 6584.646491] ---[ end trace 8636c766dcfbe0e6 ]--- This oops is due to interrupts not being disabled in this particular path. Reported-by: Dave Airlie <airlied@gmail.com> Tested-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07ipw2200: Fix race condition in the command completion acknowledgeStanislav Yakovlev
commit dd447319895d0c0af423e483d9b63f84f3f8869a upstream. Driver incorrectly validates command completion: instead of waiting for a command to be acknowledged it continues execution. Most of the time driver gets acknowledge of the command completion in a tasklet before it executes the next one. But sometimes it sends the next command before it gets acknowledge for the previous one. In such a case one of the following error messages appear in the log: Failed to send SYSTEM_CONFIG: Already sending a command. Failed to send ASSOCIATE: Already sending a command. Failed to send TX_POWER: Already sending a command. After that you need to reload the driver to get it working again. This bug occurs during roaming (reported by Sam Varshavchik) https://bugzilla.redhat.com/show_bug.cgi?id=738508 and machine booting (reported by Tom Gundersen and Mads Kiilerich) https://bugs.archlinux.org/task/28097 https://bugzilla.redhat.com/show_bug.cgi?id=802106 This patch doesn't fix the delay issue during firmware load. But at least device now works as usual after boot. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07b43: only reload config after successful initializationSeth Forshee
commit dbdedbdf4fbff3d4962a0786f37aa86dfdc48a7e upstream. Commit 2a19032 (b43: reload phy and bss settings after core restarts) introduced an unconditional call to b43_op_config() at the end of b43_op_start(). When firmware fails to load this can wedge the system. There's no need to reload the configuration after a failed initialization anyway, so only make the call if initialization was successful. BugLink: http://bugs.launchpad.net/bugs/950295 Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27ksz884x: don't copy too much in netdev_set_mac_address()Dan Carpenter
[ Upstream commit 716af4abd6e6370226f567af50bfaca274515980 ] MAX_ADDR_LEN is 32. ETH_ALEN is 6. mac->sa_data is a 14 byte array, so the memcpy() is doing a read past the end of the array. I asked about this on netdev and Ben Hutchings told me it's supposed to be copying ETH_ALEN bytes (thanks Ben). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27dummy: Add ndo_uninit().Hiroaki SHIMODA
[ Upstream commit 890fdf2a0cb88202d1427589db2cf29c1bdd3c1d ] In register_netdevice(), when ndo_init() is successful and later some error occurred, ndo_uninit() will be called. So dummy deivce is desirable to implement ndo_uninit() method to free percpu stats for this case. And, ndo_uninit() is also called along with dev->destructor() when device is unregistered, so in order to prevent dev->dstats from being freed twice, dev->destructor is modified to free_netdev(). Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27net: usb: smsc75xx: fix mtuStephane Fillod
[ Upstream commit a99ff7d0123b19ecad3b589480b6542716ab6b52 ] Make smsc75xx recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1492 bytes, and the host is unable to receive standard 1500-byte frames from the device. Inspired by same fix on cdc_eem 78fb72f7936c01d5b426c03a691eca082b03f2b9. Tested on ARM/Omap3 with EVB-LAN7500-LC. Signed-off-by: Stephane Fillod <fillods@users.sf.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27net/ethernet: ks8851_mll fix rx frame buffer overflowDavide Ciminaghi
[ Upstream commit 8a9a0ea6032186e3030419262678d652b88bf6a8 ] At the beginning of ks_rcv(), a for loop retrieves the header information relevant to all the frames stored in the mac's internal buffers. The number of pending frames is stored as an 8 bits field in KS_RXFCTR. If interrupts are disabled long enough to allow for more than 32 frames to accumulate in the MAC's internal buffers, a buffer overflow occurs. This patch fixes the problem by making the driver's frame_head_info buffer big enough. Well actually, since the chip appears to have 12K of internal rx buffers and the shortest ethernet frame should be 64 bytes long, maybe the limit could be set to 12*1024/64 = 192 frames, but 255 should be safer. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27net: smsc911x: fix skb handling in receive pathWill Deacon
[ Upstream commit 3c5e979bd037888dd7d722da22da4b43659af485 ] The SMSC911x driver resets the ->head, ->data and ->tail pointers in the skb on the reset path in order to avoid buffer overflow due to packet padding performed by the hardware. This patch fixes the receive path so that the skb pointers are fixed up after the data has been read from the device, The error path is also fixed to use number of words consistently and prevent erroneous FIFO fastforwarding when skipping over bad data. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-278139cp: set intr mask after its handler is registeredJason Wang
[ Upstream commit a8c9cb106fe79c28d6b7f1397652cadd228715ff ] We set intr mask before its handler is registered, this does not work well when 8139cp is sharing irq line with other devices. As the irq could be enabled by the device before 8139cp's hander is registered which may lead unhandled irq. Fix this by introducing an helper cp_irq_enable() and call it after request_irq(). Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27atl1: fix kernel panic in case of DMA errorsTony Zelenoff
[ Upstream commit 03662e41c7cff64a776bfb1b3816de4be43de881 ] Problem: There was two separate work_struct structures which share one handler. Unfortunately getting atl1_adapter structure from work_struct in case of DMA error was done from incorrect offset which cause kernel panics. Solution: The useless work_struct for DMA error removed and handler name changed to more generic one. Signed-off-by: Tony Zelenoff <antonz@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27wimax: i2400m - prevent a possible kernel bug due to missing fw_name stringPhil Sutter
[ Upstream commit 4eee6a3a04e8bb53fbe7de0f64d0524d3fbe3f80 ] This happened on a machine with a custom hotplug script calling nameif, probably due to slow firmware loading. At the time nameif uses ethtool to gather interface information, i2400m->fw_name is zero and so a null pointer dereference occurs from within i2400m_get_drvinfo(). Signed-off-by: Phil Sutter <phil.sutter@viprinet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27bonding: properly unset current_arp_slave on slave link upVeaceslav Falico
[ Upstream commit 5a4309746cd74734daa964acb02690c22b3c8911 ] When a slave comes up, we're unsetting the current_arp_slave without removing active flags from it, which can lead to situations where we have more than one slave with active flags in active-backup mode. To avoid this situation we must remove the active flags from a slave before removing it as a current_arp_slave. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27phy:icplus:fix Auto Power Saving in ip101a_config_init.Srinivas Kandagatla
[ Upstream commit b3300146aa8efc5d3937fd33f3cfdc580a3843bc ] This patch fixes Auto Power Saving configuration in ip101a_config_init which was broken as there is no phy register write followed after setting IP101A_APS_ON flag. This patch also fixes the return value of ip101a_config_init. Without this patch ip101a_config_init returns 2 which is not an error accroding to IS_ERR and the mac driver will continue accessing 2 as valid pointer to phy_dev resulting in memory fault. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27ppp: Don't stop and restart queue on every TX packetDavid Woodhouse
[ This combines upstream commit e675f0cc9a872fd152edc0c77acfed19bf28b81e and follow-on bug fix commit 9a5d2bd99e0dfe9a31b3c160073ac445ba3d773f ] For every transmitted packet, ppp_start_xmit() will stop the netdev queue and then, if appropriate, restart it. This causes the TX softirq to run, entirely gratuitously. This is "only" a waste of CPU time in the normal case, but it's actively harmful when the PPP device is a TEQL slave — the wakeup will cause the offending device to receive the next TX packet from the TEQL queue, when it *should* have gone to the next slave in the list. We end up seeing large bursts of packets on just *one* slave device, rather than using the full available bandwidth over all slaves. This patch fixes the problem by *not* unconditionally stopping the queue in ppp_start_xmit(). It adds a return value from ppp_xmit_process() which indicates whether the queue should be stopped or not. It *doesn't* remove the call to netif_wake_queue() from ppp_xmit_process(), because other code paths (especially from ppp_output_wakeup()) need it there and it's messy to push it out to the other callers to do it based on the return value. So we leave it in place — it's a no-op in the case where the queue wasn't stopped, so it's harmless in the TX path. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27brcm80211: smac: resume transmit fifo upon receiving framesArend van Spriel
commit badc4f07622f0f7093a201638f45e85765f1b5e4 upstream. There have been reports about not being able to use access-points on channel 12 and 13 or having connectivity issues when these channels were part of the selected regulatory domain. Upon switching to these channels the brcmsmac driver suspends the transmit dma fifos. This patch resumes them upon handing over the first received beacon to mac80211. This patch is to be applied to the stable tree for kernel versions 3.2 and 3.3. Tested-by: Francesco Saverio Schiavarelli <fschiava@libero.it> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Brett Rudley <brudley@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27mwifiex: update pcie8766 scratch register addressesBing Zhao
commit 428ca8a7065354877db63ceabfc493107686eebe upstream. The scratch register addresses have been changed for newer chips. Since the old chip was never shipped and it will not be supported any more, just update register addresses to support the new chips. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-27davinci_mdio: Fix MDIO timeout checkChristian Riesch
commit 5b76d0600b2b08eef77f8e9226938b7b6bde3099 upstream. Under heavy load (flood ping) it is possible for the MDIO timeout to expire before the loop checks the GO bit again. This patch adds an additional check whether the operation was done before actually returning -ETIMEDOUT. To reproduce this bug, flood ping the device, e.g., ping -f -l 1000 After some time, a "timed out waiting for user access" warning may appear. And even worse, link may go down since the PHY reported a timeout. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Cyril Chemparathy <cyril@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-22rtlwifi: Add missing DMA buffer unmapping for PCI driversLarry Finger
commit 673f7786e205c87b5d978c62827b9a66d097bebb upstream. In https://bugzilla.kernel.org/show_bug.cgi?id=42976, a system with driver rtl8192se used as an AP suffers from "Out of SW-IOMMU space" errors. These are caused by the DMA buffers used for beacons never being unmapped. This bug was also reported at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/961618 Reported-and-Tested-by: Da Xue <da@lessconfused.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-22rtlwifi: Preallocate USB read buffers and eliminate kalloc in read routineLarry Finger
commit a7959c1394d4126a70a53b914ce4105f5173d0aa upstream. The current version of rtlwifi for USB operations uses kmalloc to acquire a 32-bit buffer for each read of the device. When _usb_read_sync() is called with the rcu_lock held, the result is a "sleeping function called from invalid context" BUG. This is reported for two cases in https://bugzilla.kernel.org/show_bug.cgi?id=42775. The first case has the lock originating from within rtlwifi and could be fixed by rearranging the locking; however, the second originates from within mac80211. The kmalloc() call is removed from _usb_read_sync() by creating a ring buffer pointer in the private area and allocating the buffer data in the probe routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13Revert "ath9k: fix going to full-sleep on PS idle"Sujith Manoharan
commit 011afa1ed8c408d694957d2474d89dc81a60b70c upstream. This reverts commit c1afdaff90538ef085b756454f12b29575411214. Users have reported connection failures in 3.3.1 and suspend/resume failures in 3.4-rcX. Revert this commit for now - PS IDLE can be fixed in a clean manner later on. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13USB: Add Motorola Rokr E6 Id to the USBNet driver "zaurus"Guan Xin
commit a2daf263107ba3eb6db33931881731fa51c95045 upstream. Added Vendor/Device Id of Motorola Rokr E6 (22b8:6027) so it can be recognized by the "zaurus" USBNet driver. Applies to Linux 3.2.13 and 2.6.39.4. Signed-off-by: Guan Xin <guanx.bac@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13iwlegacy: do not nulify il->vif on resetStanislaw Gruszka
commit 883a649b737cdbe3ede7e50f3f939fd706ed5c4e upstream. This il->vif is dereferenced in different part of iwlegacy code, so do not nullify it. This should fix random crashes observed in companion with microcode errors i.e. crash in il3945_config_ap(). Additionally this should address also WARNING: at drivers/net/wireless/iwlegacy/common.c:4656 il_mac_remove_interface at least one of the possible reasons of that warning. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13ath9k: fix max noise floor thresholdRajkumar Manoharan
commit 2ee0a07028d2cde6e131b73f029dae2b93c50f3a upstream. Currently the maximum noise floor limit is set as too high (-60dB). The assumption of having a higher threshold limit is that it would help de-sensitize the receiver (reduce phy errors) from continuous interference. But when we have a bursty interference where there are collisions and then free air time and if the receiver is desensitized too much, it will miss the normal packets too. Lets make use of chips specific min, nom and max limits always. This patch helps to improve the connection stability in congested networks. Cc: Paul Stewart <pstew@google.com> Tested-by: Gary Morain <gmorain@google.com> Signed-off-by: Madhan Jaganathan <madhanj@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13rtlwifi: rtl8192ce: rtl8192cu: rtl8192de: Fix low-gain setting when scanningLarry Finger
commit 643c61e119459e9d750087b7b34be94491efebf9 upstream. In https://bugzilla.redhat.com/show_bug.cgi?id=770207, slowdowns of driver rtl8192ce are reported. One fix (commit a9b89e2) has already been applied, and it helped, but the maximum RX speed would still drop to 1 Mbps. As in the previous fix, the initial gain was determined to be the problem; however, the problem arises from a setting of the gain when scans are started. Driver rtl8192de also has the same code structure - this one is fixed as well. Reported-and-Tested-by: Ivan Pesin <ivan.pesin@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13Fix non TBI PHY access; a bad merge undid bug fix in a previous commit.Kenth Eriksson
[ Upstream commit 464b57da56910c8737ede75ad820b9a7afc46b3e ] The merge done in commit b26e478f undid bug fix in commit c3e072f8 ("net: fsl_pq_mdio: fix non tbi phy access"), with the result that non TBI (e.g. MDIO) PHYs cannot be accessed. Signed-off-by: Kenth Eriksson <kenth.eriksson@transmode.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13net: usb: cdc_eem: fix mtuRabin Vincent
[ Upstream commit 78fb72f7936c01d5b426c03a691eca082b03f2b9 ] Make CDC EEM recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1494 bytes, and the host is unable to receive standard 1500-byte frames from the device. Tested with the Linux USB Ethernet gadget. Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13sky2: dont overwrite settings for PHY Quick linkLino Sanfilippo
[ Upstream commit 2240eb4ae3dc4acff20d1a8947c441c451513e37 ] This patch corrects a bug in function sky2_open() of the Marvell Yukon 2 driver in which the settings for PHY quick link are overwritten. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by: Stephen Hemminger <shemminger@vyattta.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13tg3: Fix 5717 serdes powerdown problemMatt Carlson
[ Upstream commit 085f1afc56619bda424941412fdeaff1e32c21dc ] If port 0 of a 5717 serdes device powers down, it hides the phy from port 1. This patch works around the problem by keeping port 0's phy powered up. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13via-rhine: fix wait-bit inversion.Andreas Mohr
[ Upstream commit 3f8c91a7398b9266fbe7abcbe4bd5dffef907643 ] Bug appeared in a384a33bb1c9ec2d99db2046b41f57023fa7d77b ("via-rhine: RHINE_WAIT_FOR macro removal). It can be noticed during suspend/resume. Signed-off-by: Andreas Mohr <andi@lisas.de> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Cc: David Lv <DavidLv@viatech.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2026-05-21 15:02:31 +0000