summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2014-03-31sfc: Use the correct maximum TX DMA ring size for SFC9100Ben Hutchings
commit d9317aea16ecec7694271ef11fb7791a0f0d9cc5 upstream. As part of a workaround for a hardware erratum in the SFC9100 family (SF bug 35388), the TX_DESC_UPD_DWORD register address is also used for communicating with the event block, and only descriptor pointer values < 2048 are valid. If the TX DMA ring size is increased to 4096 descriptors (which the firmware still allows) then we may write a descriptor pointer value >= 2048, which has entirely different and undesirable effects! Limit the TX DMA ring size correctly when this workaround is in effect. Fixes: 8127d661e77f ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-31net: davinci_emac: Replace devm_request_irq with request_irqChristian Riesch
commit 33b7107f59a61236d94ecd6b45e20283cd5abcc8 upstream. In commit 6892b41d9701283085b655c6086fb57a5d63fa47 Author: Lad, Prabhakar <prabhakar.csengg@gmail.com> Date: Tue Jun 25 21:24:51 2013 +0530 net: davinci: emac: Convert to devm_* api the call of request_irq is replaced by devm_request_irq and the call of free_irq is removed. But since interrupts are requested in emac_dev_open, doing ifconfig up/down on the board requests the interrupts again each time, causing devm_request_irq to fail. The interface is dead until the device is rebooted. This patch reverts said commit partially: It changes the driver back to use request_irq instead of devm_request_irq, puts free_irq back in place, but keeps the remaining changes of the original patch. Reported-by: Jon Ringle <jon@ringle.org> Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-26ibmveth: Fix endian issues with MAC addressesAnton Blanchard
commit d746ca9561440685edb62614d1bcbbc27ff50e66 upstream. The code to load a MAC address into a u64 for passing to the hypervisor via a register is broken on little endian. Create a helper function called ibmveth_encode_mac_addr which does the right thing in both big and little endian. We were storing the MAC address in a long in struct ibmveth_adapter. It's never used so remove it - we don't need another place in the driver where we create endian issues with MAC addresses. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-26iwlwifi: mvm: don't WARN when statistics are handled lateEmmanuel Grumbach
commit 1e9291996c4eedf79883f47ec635235e39d3d6cd upstream. Since the statistics handler is asynchrous, it can very well be that we will handle the statistics (hence the RSSI fluctuation) when we already disassociated. Don't WARN on this case. This solves: https://bugzilla.redhat.com/show_bug.cgi?id=1071998 Cc: <stable@vger.kernel.org> [3.10+] Fixes: 2b76ef13086f ("iwlwifi: mvm: implement reduced Tx power") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-24can: flexcan: flexcan_remove(): add missing netif_napi_del()Marc Kleine-Budde
commit d96e43e8fce28cf97df576a07af9d65657a41a6f upstream. This patch adds the missing netif_napi_del() to the flexcan_remove() function. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-24can: flexcan: factor out transceiver {en,dis}able into seperate functionsMarc Kleine-Budde
commit f003698e23f6f56a791774f14d0ac35d04872490 upstream. This patch moves the transceiver enable and disable into seperate functions, where the NULL pointer check is hidden. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-24can: flexcan: fix transition from and to low power mode in chip_{en,dis}ableMarc Kleine-Budde
commit 9b00b300e7bce032c467c36ca47fe2a776887fc2 upstream. In flexcan_chip_enable() and flexcan_chip_disable() fixed delays are used. Experiments have shown that the transition from and to low power mode may take several microseconds. This patch adds a while loop which polls the Low Power Mode ACK bit (LPM_ACK) that indicates a successfull mode change. If the function runs into a timeout a error value is returned. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-24can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() failsMarc Kleine-Budde
commit 7e9e148af01ef388efb6e2490805970be4622792 upstream. If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed, this patch adds the missing cleanup. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-24can: flexcan: fix shutdown: first disable chip, then all interruptsMarc Kleine-Budde
commit 5be93bdda64e85450598c6e97f79fb8f6acf30e0 upstream. When shutting down the CAN interface (ifconfig canX down) during high CAN bus loads, the CAN core might hang and freeze the whole CPU. This patch fixes the shutdown sequence by first disabling the CAN core then disabling all interrupts. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-24vmxnet3: fix building without CONFIG_PCI_MSIArnd Bergmann
commit 0a8d8c446b5429d15ff2d48f46e00d8a08552303 upstream. Since commit d25f06ea466e "vmxnet3: fix netpoll race condition", the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled, because it unconditionally references the vmxnet3_msix_rx() function. To fix this, use the same #ifdef in the caller that exists around the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-24vmxnet3: fix netpoll race conditionNeil Horman
commit d25f06ea466ea521b563b76661180b4e44714ae6 upstream. vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22Revert "USBNET: ax88179_178a: enable tso if usb host supports sg dma"Mathias Nyman
commit 469d417b68958a064c09e7875646c97c6e783dfc upstream. This reverts commit 3804fad45411b48233b48003e33a78f290d227c8. This commit, together with commit 247bf557273dd775505fb9240d2d152f4f20d304 "xhci 1.0: Limit arbitrarily-aligned scatter gather." were origially added to get xHCI 1.0 hosts and usb ethernet ax88179_178a devices working together with scatter gather. xHCI 1.0 hosts pose some requirement on how transfer buffers are aligned, setting this requirement for 1.0 hosts caused USB 3.0 mass storage devices to fail more frequently. USB 3.0 mass storage devices used to work before 3.14-rc1. Theoretically, the TD fragment rules could have caused an occasional disk glitch. Now the devices *will* fail, instead of theoretically failing. >From a user perspective, this looks like a regression; the USB device obviously fails on 3.14-rc1, and may sometimes silently fail on prior kernels. The proper soluition is to implement the TD fragment rules for xHCI 1.0 hosts, but for now, revert this patch until scatter gather can be properly supported. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22mwifiex: save and copy AP's VHT capability info correctlyAmitkumar Karwar
commit d51246481c7f28bbfa1f814ded2da65e531cd4b2 upstream. While preparing association request, intersection of device's VHT capability information and corresponding field advertised by AP is used. This patch fixes a couple errors while saving and copying vht_cap and vht_oper fields from AP's beacon. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22mwifiex: copy AP's HT capability info correctlyAmitkumar Karwar
commit c99b1861c232e1f641f13b8645e0febb3712cc71 upstream. While preparing association request, intersection of device's HT capability information and corresponding fields advertised by AP is used. This patch fixes an error while copying this field from AP's beacon. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22mwifiex: do not advertise usb autosuspend supportBing Zhao
commit adb07df1e039e9fe43e66aeea8b4771f83659dbb upstream. As many Surface Pro I & II users have found out, the mwifiex_usb doesn't support usb autosuspend, and it has caused some system stability issues. Bug 69661 - mwifiex_usb on MS Surface Pro 1 is unstable Bug 60815 - Interface hangs in mwifiex_usb Bug 64111 - mwifiex_usb USB8797 crash failed to get signal information USB autosuspend get triggered when Surface Pro's AC power is removed or powertop enables power saving on USB8797 device. Driver's suspend handler is called here, but resume handler won't be called until the AC power is put back on or powertop disables power saving for USB8797. We need to refactor the suspend/resume handlers to support usb autosuspend properly. For now let's just remove it. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22mwifiex: fix cmd and Tx data timeout issue for PCIe cardsAmitkumar Karwar
commit 1c97560f6d751a620978504a4a888c631192b71a upstream. We are sending sleep confirm done interrupt in the middle of sleep handshake. There is a corner case when Tx done interrupt is received from firmware during sleep handshake due to which host and firmware power states go out of sync causing cmd and Tx data timeout problem. Hence sleep confirm done interrupt is sent at the end of sleep handshake to fix the problem. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22mwifiex: add NULL check for PCIe Rx skbAmitkumar Karwar
commit bb8e6a1ee881d131e404f0f1f5e8dc9281002771 upstream. We may get a NULL pointer here if skb allocation for Rx packet was failed earlier. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22mwifiex: clean pcie ring only when device is presentAvinash Patil
commit 4f7ba432202c8330cc03ab959c6228d0de5dc4a3 upstream. Write io memory to clean PCIe buffer only when PCIe device is present else this results into crash because of invalid memory access. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22iwlwifi: disable TX AMPDU by default for iwldvmEmmanuel Grumbach
commit 205e2210daa975d92ace485a65a31ccc4077fe1a upstream. NICs supported by iwldvm don't handle well TX AMPDU. Disable it by default, still leave the possibility to the user to force enable it with a debug parameter. NICs supported by iwlmvm don't suffer from the same issue, leave TX AMPDU enabled by default for these. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22iwlwifi: fix TX status for aggregated packetsJohannes Berg
commit 143582c6847cb285b361804c613127c25de60ca4 upstream. Only the first packet is currently handled correctly, but then all others are assumed to have failed which is problematic. Fix this, marking them all successful instead (since if they're not then the firmware will have transmitted them as single frames.) This fixes the lost packet reporting. Also do a tiny variable scoping cleanup. Signed-off-by: Johannes Berg <johannes.berg@intel.com> [Add the dvm part] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22iwlwifi: dvm: clear IWL_STA_UCODE_INPROGRESS when assoc failsEmmanuel Grumbach
commit ec6f678c74dbdb06a6a775bbb00f1d26c17c404b upstream. We set IWL_STA_UCODE_INPROGRESS flag when we add a station and clear it when we send the LQ command for it. But the LQ command is sent only when the association succeeds. If the association doesn't succeed, we would leave this flag set and that wouldn't indicate the station entry as vacant. This probably fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1065663 Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22iwlwifi: mvm: change of listen interval from 70 to 10Max Stepanov
commit e7eb65cac0720df8b3946af7f7a9dc363cf0a814 upstream. Some APs reject STA association request if a listen interval value exceeds a threshold of 10. Thus, for example, Cisco APs may deny STA associations returning status code 12 (Association denied due to reason outside the scope of 802.11 standard) in the association response frame. Fixing the issue by setting the default IWL_CONN_MAX_LISTEN_INTERVAL value from 70 to 10. Signed-off-by: Max Stepanov <Max.Stepanov@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22ath9k: fix invalid descriptor discardingFelix Fietkau
commit b7b146c9c9a0248cc57da71244f672ebc54bbef1 upstream. Only set sc->rx.discard_next to rx_stats->rs_more when actually discarding the current descriptor. Also, fix a detection of broken descriptors: First the code checks if the current descriptor is not done. Then it checks if the next descriptor is done. Add a check that afterwards checks the first descriptor again, because it might have been completed in the mean time. This fixes a regression introduced in commit 723e711356b5a8a95728a890e254e8b0d47b55cf "ath9k: fix handling of broken descriptors" Reported-by: Marco André Dinis <marcoandredinis@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22ath9k: fix ps-poll responses under a-mpdu sessionsFelix Fietkau
commit 558ff225de80ac95b132d3a115ddadcd64498b4f upstream. When passing tx frames to the U-APSD queue for powersave poll responses, the ath_atx_tid pointer needs to be passed to ath_tx_setup_buffer for proper sequence number accounting. This fixes high latency and connection stability issues with ath9k running as AP and a few kinds of mobile phones as client, when PS-Poll is heavily used Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22ath9k: protect tid->sched checkStanislaw Gruszka
commit 21f8aaee0c62708654988ce092838aa7df4d25d8 upstream. We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That is race condition which can result of doing list_del(&tid->list) twice (second time with poisoned list node) and cause crash like shown below: [424271.637220] BUG: unable to handle kernel paging request at 00100104 [424271.637328] IP: [<f90fc072>] ath_tx_aggr_sleep+0x62/0xe0 [ath9k] ... [424271.639953] Call Trace: [424271.639998] [<f90f6900>] ? ath9k_get_survey+0x110/0x110 [ath9k] [424271.640083] [<f90f6942>] ath9k_sta_notify+0x42/0x50 [ath9k] [424271.640177] [<f809cfef>] sta_ps_start+0x8f/0x1c0 [mac80211] [424271.640258] [<c10f730e>] ? free_compound_page+0x2e/0x40 [424271.640346] [<f809e915>] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211] [424271.640437] [<c112f048>] ? kmem_cache_free+0x1d8/0x1f0 [424271.640510] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640578] [<c10fc23c>] ? put_page+0x2c/0x40 [424271.640640] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640706] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640787] [<f809dde3>] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211] [424271.640897] [<f80a07a0>] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211] [424271.641009] [<f809e22d>] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211] [424271.641104] [<c13846ce>] ? ip_output+0x7e/0xd0 [424271.641182] [<f80a1057>] ieee80211_rx+0x307/0x7c0 [mac80211] [424271.641266] [<f90fa6ee>] ath_rx_tasklet+0x88e/0xf70 [ath9k] [424271.641358] [<f80a0f2c>] ? ieee80211_rx+0x1dc/0x7c0 [mac80211] [424271.641445] [<f90f82db>] ath9k_tasklet+0xcb/0x130 [ath9k] Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=70551 Reported-and-tested-by: Max Sydorenko <maxim.stargazer@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22ath9k: Fix ETSI compliance for AR9462 2.0Sujith Manoharan
commit b3050248c167871ca52cfdb2ce78aa2460249346 upstream. The minimum CCA power threshold values have to be adjusted for existing cards to be in compliance with new regulations. Newer cards will make use of the values obtained from EEPROM, support for this was added earlier. To make sure that cards that are already in use and don't have proper values in EEPROM, do not violate regulations, use the initvals instead. Reported-by: Jeang Daniel <dyjeong@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-13tg3: Don't check undefined error bits in RXBDMichael Chan
[ Upstream commit d7b95315cc7f441418845a165ee56df723941487 ] Redefine the RXD_ERR_MASK to include only relevant error bits. This fixes a customer reported issue of randomly dropping packets on the 5719. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-13sfc: check for NULL efx->ptp_data in efx_ptp_eventEdward Cree
[ Upstream commit 8f355e5cee63c2c0c145d8206c4245d0189f47ff ] If we receive a PTP event from the NIC when we haven't set up PTP state in the driver, we attempt to read through a NULL pointer efx->ptp_data, triggering a panic. Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-13virtio-net: alloc big buffers also when guest can receive UFOJason Wang
[ Upstream commit 0e7ede80d929ff0f830c44a543daa1acd590c749 ] We should alloc big buffers also when guest can receive UFO packets to let the big packets fit into guest rx buffer. Fixes 5c5167515d80f78f6bb538492c423adcae31ad65 (virtio-net: Allow UFO feature to be set and advertised.) Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-13tun: remove bogus hardware vlan acceleration flags from vlan_featuresFernando Luis Vazquez Cao
[ Upstream commit 6671b2240c54585d4afb5286a29f1569fe5e40a8 ] Even though only the outer vlan tag can be HW accelerated in the transmission path, in the TUN/TAP driver vlan_features mirrors hw_features, which happens to have the NETIF_F_HW_VLAN_?TAG_TX flags set. Because of this, during packet tranmisssion through a stacked vlan device dev_hard_start_xmit, (incorrectly) assuming that the vlan device supports hardware vlan acceleration, does not add the vlan header to the skb payload and the inner vlan tags are lost (vlan_tci contains the outer vlan tag when userspace reads the packet from the tap device). Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-13veth: Fix vlan_features so as to be able to use stacked vlan interfacesToshiaki Makita
[ Upstream commit 8d0d21f4053c07714802cbe8b1fe26913ec296cc ] Even if we create a stacked vlan interface such as veth0.10.20, it sends single tagged frames (tagged with only vid 10). Because vlan_features of a veth interface has the NETIF_F_HW_VLAN_[CTAG/STAG]_TX bits, veth0.10 also has that feature, so dev_hard_start_xmit(veth0.10) doesn't call __vlan_put_tag() and vlan_dev_hard_start_xmit(veth0.10) overwrites vlan_tci. This prevents us from using a combination of 802.1ad and 802.1Q in containers, etc. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05can: kvaser_usb: check number of channels returned by HWOlivier Sobrie
commit 862474f8b46f6c1e600d4934e40ba40646c696ec upstream. It is needed to check the number of channels returned by the HW because it cannot be greater than MAX_NET_DEVICES otherwise it will crash. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05rtlwifi: rtl8192ce: Fix too long disable of IRQsOlivier Langlois
commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 upstream. rtl8192ce is disabling for too long the local interrupts during hw initiatialisation when performing scans The observable symptoms in dmesg can be: - underruns from ALSA playback - clock freezes (tstamps do not change for several dmesg entries until irqs are finaly reenabled): [ 250.817669] rtlwifi:rtl_op_config():<0-0-0> 0x100 [ 250.817685] rtl8192ce:_rtl92ce_phy_set_rf_power_state():<0-1-0> IPS Set eRf nic enable [ 250.817732] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.817796] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.817910] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818024] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818139] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818253] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818367] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:98053f15:10 [ 250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1 [ 250.818472] rtl8192c_common:rtl92c_download_fw():<0-1-0> Firmware Version(49), Signature(0x88c1),Size(32) [ 250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> PairwiseEncAlgorithm = 0 GroupEncAlgorithm = 0 [ 250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> The SECR-value cc [ 250.818472] rtl8192c_common:rtl92c_dm_check_txpower_tracking_thermal_meter():<0-1-0> Schedule TxPowerTracking direct call!! [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> rtl92c_dm_txpower_tracking_callback_thermalmeter [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial pathA ele_d reg0xc80 = 0x40000000, ofdm_index=0xc [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial reg0xa24 = 0x90e1317, cck_index=0xc, ch14 0 [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf delta 0x1 delta_lck 0x0 delta_iqk 0x0 [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> <=== [ 250.818472] rtl8192c_common:rtl92c_dm_initialize_txpower_tracking_thermalmeter():<0-1-0> pMgntInfo->txpower_tracking = 1 [ 250.818472] rtl8192ce:rtl92ce_led_control():<0-1-0> ledaction 3 [ 250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1 [ 250.818472] rtlwifi:rtl_ips_nic_on():<0-1-0> before spin_unlock_irqrestore [ 251.154656] PCM: Lost interrupts? [Q]-0 (stream=0, delta=15903, new_hw_ptr=293408, old_hw_ptr=277505) The exact code flow that causes that is: 1. wpa_supplicant send a start_scan request to the nl80211 driver 2. mac80211 module call rtl_op_config with IEEE80211_CONF_CHANGE_IDLE 3. rtl_ips_nic_on is called which disable local irqs 4. rtl92c_phy_set_rf_power_state() is called 5. rtl_ps_enable_nic() is called and hw_init()is executed and then the interrupts on the device are enabled A good solution could be to refactor the code to avoid calling rtl92ce_hw_init() with the irqs disabled but a quick and dirty solution that has proven to work is to reenable the irqs during the function rtl92ce_hw_init(). I think that it is safe doing so since the device interrupt will only be enabled after the init function succeed. Signed-off-by: Olivier Langlois <olivier@trillion01.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05rtlwifi: Fix incorrect return from rtl_ps_enable_nic()Olivier Langlois
commit 2e8c5e56b307271c2dab6f8bfd1d8a3822ca2390 upstream. rtl_ps_enable_nic() is called from loops that will loop until this function returns true or a maximum number of retries is performed. hw_init() returns non-zero on error. In that situation return false to restore the original design intent to retry hw init when it fails. Signed-off-by: Olivier Langlois <olivier@trillion01.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05rtl8187: fix regression on MIPS without coherent DMAStanislaw Gruszka
commit b6213e413a4e0c66548153516b074df14f9d08e0 upstream. This patch fixes regression caused by commit a16dad77634 "MIPS: Fix potencial corruption". That commit fixes one corruption scenario in cost of adding another one, which actually start to cause crashes on Yeeloong laptop when rtl8187 driver is used. For correct DMA read operation on machines without DMA coherence, kernel have to invalidate cache, such it will refill later with new data that device wrote to memory, when that data is needed to process. We can only invalidate full cache line. Hence when cache line includes both dma buffer and some other data (written in cache, but not yet in main memory), the other data can not hit memory due to invalidation. That happen on rtl8187 where struct rtl8187_priv fields are located just before and after small buffers that are passed to USB layer and DMA is performed on them. To fix the problem we align buffers and reserve space after them to make them match cache line. This patch does not resolve all possible MIPS problems entirely, for that we have to assure that we always map cache aligned buffers for DMA, what can be complex or even not possible. But patch fixes visible and reproducible regression and seems other possible corruptions do not happen in practice, since Yeeloong laptop works stable without rtl8187 driver. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=54391 Reported-by: Petr Pisar <petr.pisar@atlas.cz> Bisected-by: Tom Li <biergaizi2009@gmail.com> Reported-and-tested-by: Tom Li <biergaizi2009@gmail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Larry Finger <Larry.Finger@lwfinger.next> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26bonding: 802.3ad: make aggregator_identifier bond-privateJiri Bohac
[ Upstream commit 163c8ff30dbe473abfbb24a7eac5536c87f3baa9 ] aggregator_identifier is used to assign unique aggregator identifiers to aggregators of a bond during device enslaving. aggregator_identifier is currently a global variable that is zeroed in bond_3ad_initialize(). This sequence will lead to duplicate aggregator identifiers for eth1 and eth3: create bond0 change bond0 mode to 802.3ad enslave eth0 to bond0 //eth0 gets agg id 1 enslave eth1 to bond0 //eth1 gets agg id 2 create bond1 change bond1 mode to 802.3ad enslave eth2 to bond1 //aggregator_identifier is reset to 0 //eth2 gets agg id 1 enslave eth3 to bond0 //eth3 gets agg id 2 Fix this by making aggregator_identifier private to the bond. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26usbnet: remove generic hard_header_len checkEmil Goode
[ Upstream commit eb85569fe2d06c2fbf4de7b66c263ca095b397aa ] This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26net: asix: add missing flag to struct driver_infoEmil Goode
[ Upstream commit d43ff4cd798911736fb39025ec8004284b1b0bc2 ] The struct driver_info ax88178_info is assigned the function asix_rx_fixup_common as it's rx_fixup callback. This means that FLAG_MULTI_PACKET must be set as this function is cloning the data and calling usbnet_skb_return. Not setting this flag leads to usbnet_skb_return beeing called a second time from within the rx_process function in the usbnet module. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26tg3: Fix deadlock in tg3_change_mtu()Nithin Sujir
[ Upstream commit c6993dfd7db9b0c6b7ca7503a56fda9236a4710f ] Quoting David Vrabel - "5780 cards cannot have jumbo frames and TSO enabled together. When jumbo frames are enabled by setting the MTU, the TSO feature must be cleared. This is done indirectly by calling netdev_update_features() which will call tg3_fix_features() to actually clear the flags. netdev_update_features() will also trigger a new netlink message for the feature change event which will result in a call to tg3_get_stats64() which deadlocks on the tg3 lock." tg3_set_mtu() does not need to be under the tg3 lock since converting the flags to use set_bit(). Move it out to after tg3_netif_stop(). Reported-by: David Vrabel <david.vrabel@citrix.com> Tested-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26net: qmi_wwan: add Netgear Aircard 340UBjørn Mork
[ Upstream commit fbd3a77d813f211060f86cc7a2f8416caf0e03b1 ] This device was mentioned in an OpenWRT forum. Seems to have a "standard" Sierra Wireless ifnumber to function layout: 0: qcdm 2: nmea 3: modem 8: qmi 9: storage Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26can: add destructor for self generated skbsOliver Hartkopp
[ Upstream commit 0ae89beb283a0db5980d1d4781c7d7be2f2810d6 ] Self generated skbuffs in net/can/bcm.c are setting a skb->sk reference but no explicit destructor which is enforced since Linux 3.11 with commit 376c7311bdb6 (net: add a temporary sanity check in skb_orphan()). This patch adds some helper functions to make sure that a destructor is properly defined when a sock reference is assigned to a CAN related skb. To create an unshared skb owned by the original sock a common helper function has been introduced to replace open coded functions to create CAN echo skbs. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Andre Naujoks <nautsch2@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-22iwlwifi: mvm: BT Coex - disable BT when TXing probe request in scanEmmanuel Grumbach
commit 8e2a866ef214af4e104ec8d593e3269d8fe66d19 upstream. Not doing so will let BT kill our probe requests leading to failures in scan. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22iwlwifi: mvm: print the version of the firmware when it assertsEmmanuel Grumbach
commit b900a87b2eb90c0b9586496c82a323a1b8832d73 upstream. This can be useful to be able to spot the firmware version from the error reports without needing to fetch it from another place. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22iwlwifi: mvm: don't allow A band if SKU forbids itEmmanuel Grumbach
commit c512865446e6dd5b6e91e81187e75b734ad7cfc7 upstream. The driver wasn't reading the NVM properly. While this didn't lead to any issue until now, it seems that there is an old version of the NVM in the wild. In this version, the A band channels appear to be valid but the SKU capabilities (another field of the NVM) says that A band isn't supported at all. With this specific version of the NVM, the driver would think that A band is supported while the HW / firmware don't. This leads to asserts. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22ar5523: fix usb id for Gigaset.Oleksij Rempel
commit 4fcfc7443d072582b5047b8b391d711590e5645c upstream. Raw id and FW id should be switched. Tested-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22ath9k: Do not support PowerSave by defaultSujith Manoharan
commit 8298383c2cd5a6d0639f1bb1781fba181bd20154 upstream. Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22ath9k_htc: Do not support PowerSave by defaultOleksij Rempel
commit 6bca610d97b6139a1d7598b8009da9d339daa50f upstream. It is a copy/paste of patch provided by Sujith for ath9k. "Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter." Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22ath9k_htc: make ->sta_rc_update atomic for most callsStanislaw Gruszka
commit 2fa4cb905605c863bf570027233af7afd8149ae4 upstream. sta_rc_update() callback must be atomic, hence we can not take mutexes or do other operations, which can sleep in ath9k_htc_sta_rc_update(). I think we can just return from ath9k_htc_sta_rc_update(), if it is called without IEEE80211_RC_SUPP_RATES_CHANGED bit. That will help with scheduling while atomic bug for most cases (except mesh and IBSS modes). For mesh and IBSS I do not see other solution like creating additional workqueue, because sending firmware command require us to sleep, but this can be done in additional patch. Patch partially fixes bug: https://bugzilla.redhat.com/show_bug.cgi?id=990955 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13xen/pvhvm: If xen_platform_pci=0 is set don't blow up (v4).Konrad Rzeszutek Wilk
commit 51c71a3bbaca868043cc45b3ad3786dd48a90235 upstream. The user has the option of disabling the platform driver: 00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01) which is used to unplug the emulated drivers (IDE, Realtek 8169, etc) and allow the PV drivers to take over. If the user wishes to disable that they can set: xen_platform_pci=0 (in the guest config file) or xen_emul_unplug=never (on the Linux command line) except it does not work properly. The PV drivers still try to load and since the Xen platform driver is not run - and it has not initialized the grant tables, most of the PV drivers stumble upon: input: Xen Virtual Keyboard as /devices/virtual/input/input5 input: Xen Virtual Pointer as /devices/virtual/input/input6M ------------[ cut here ]------------ kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206! invalid opcode: 0000 [#1] SMP Modules linked in: xen_kbdfront(+) xenfs xen_privcmd CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1 Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013 RIP: 0010:[<ffffffff813ddc40>] [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300 Call Trace: [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront] [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront] [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0 [<ffffffff8145e7d9>] driver_attach+0x19/0x20 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40 [<ffffffffa0015000>] ? 0xffffffffa0014fff [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront] [<ffffffff81002049>] do_one_initcall+0x49/0x170 .. snip.. which is hardly nice. This patch fixes this by having each PV driver check for: - if running in PV, then it is fine to execute (as that is their native environment). - if running in HVM, check if user wanted 'xen_emul_unplug=never', in which case bail out and don't load any PV drivers. - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci) does not exist, then bail out and not load PV drivers. - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks', then bail out for all PV devices _except_ the block one. Ditto for the network one ('nics'). - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary' then load block PV driver, and also setup the legacy IDE paths. In (v3) make it actually load PV drivers. Reported-by: Sander Eikelenboom <linux@eikelenboom.it Reported-by: Anthony PERARD <anthony.perard@citrix.com> Reported-and-Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: Add extra logic to handle the myrid ways 'xen_emul_unplug' can be used per Ian and Stefano suggestion] [v3: Make the unnecessary case work properly] [v4: s/disks/ide-disks/ spotted by Fabio] Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06xen-netfront: fix resource leak in netfrontAnnie Li
[ Upstream commit cefe0078eea52af17411eb1248946a94afb84ca5 ] This patch removes grant transfer releasing code from netfront, and uses gnttab_end_foreign_access to end grant access since gnttab_end_foreign_access_ref may fail when the grant entry is currently used for reading or writing. * clean up grant transfer code kept from old netfront(2.6.18) which grants pages for access/map and transfer. But grant transfer is deprecated in current netfront, so remove corresponding release code for transfer. * fix resource leak, release grant access (through gnttab_end_foreign_access) and skb for tx/rx path, use get_page to ensure page is released when grant access is completed successfully. Xen-blkfront/xen-tpmfront/xen-pcifront also have similar issue, but patches for them will be created separately. V6: Correct subject line and commit message. V5: Remove unecessary change in xennet_end_access. V4: Revert put_page in gnttab_end_foreign_access, and keep netfront change in single patch. V3: Changes as suggestion from David Vrabel, ensure pages are not freed untill grant acess is ended. V2: Improve patch comments. Signed-off-by: Annie Li <annie.li@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-29 06:28:29 +0000