summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-06-20pppoe: warning fixStephen Hemminger
Fix warning: drivers/net/pppoe.c: In function 'pppoe_recvmsg': drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast because skb->len is unsigned int and total_len is size_t Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17Merge branch 'davem-fixes' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-06-17tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is setAng Way Chuang
By default, tun.c running in TUN_TUN_DEV mode will set the protocol of packet to IPv4 if TUN_NO_PI is set. My program failed to work when I assumed that the driver will check the first nibble of packet, determine IP version and set the appropriate protocol. Signed-off-by: Ang Way Chuang <wcang@nav6.org> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17atl1: relax eeprom mac address error checkRadu Cristescu
The atl1 driver tries to determine the MAC address thusly: - If an EEPROM exists, read the MAC address from EEPROM and validate it. - If an EEPROM doesn't exist, try to read a MAC address from SPI flash. - If that fails, try to read a MAC address directly from the MAC Station Address register. - If that fails, assign a random MAC address provided by the kernel. We now have a report of a system fitted with an EEPROM containing all zeros where we expect the MAC address to be, and we currently handle this as an error condition. Turns out, on this system the BIOS writes a valid MAC address to the NIC's MAC Station Address register, but we never try to read it because we return an error when we find the all- zeros address in EEPROM. This patch relaxes the error check and continues looking for a MAC address even if it finds an illegal one in EEPROM. Signed-off-by: Radu Cristescu <advantis@gmx.net> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17net/enc28j60: low power modeDavid Brownell
Keep enc28j60 chips in low-power mode when they're not in use. At typically 120 mA, these chips run hot even when idle; this low power mode cuts that power usage by a factor of around 100. This version provides a generic routine to poll a register until its masked value equals some value ... e.g. bit set or cleared. It's basically what the previous wait_phy_ready() did, but this version is generalized to support the handshaking needed to enter and exit low power mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17net/enc28j60: section fixDavid Brownell
Minor bugfixes to the enc28j60 driver ... wrong section marking, indentation, and bogus use of spi_bus_type. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17sky2: 88E8040T pci device idStephen Hemminger
Missed one pci id for 88E8040T. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: download firmware in pci probeDhananjay Phadke
Downloading firmware in pci probe allows recovery in case of firmware failure by reloading the driver. Also reduced delays in firmware load. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: cleanup debug messagesDhananjay Phadke
o Remove unnecessary debug prints and functions. o Explicitly specify pci class (0x020000) to avoid enabling management function. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: remove global physical_port arrayDhananjay Phadke
Store physical port number in netxen_adapter structure. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: fix portnum for hp mezz cardsDhananjay Phadke
This fixes a the issue where logical port number is set incorrectly for HP blade mezz cards. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17ibm_newemac: select CRC32 in KconfigJosh Boyer
The ibm_newemac driver requires ether_crc to be defined. Apparently it is possible to generate a .config without CONFIG_CRC32 set which causes the following link errors if IBM_NEW_EMAC is selected: LD .tmp_vmlinux1 drivers/built-in.o: In function `emac_hash_mc': core.c:(.text+0x2f524): undefined reference to `crc32_le' core.c:(.text+0x2f528): undefined reference to `bitrev32' make: *** [.tmp_vmlinux1] Error 1 This patch has IBM_NEW_EMAC select CRC32 so we don't hit this error. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-06-13rt2x00: Add D-link DWA111 supportIvo van Doorn
Add new rt73usb USB ID for D-Link DWA111 Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13rt2x00: LEDS build failureRandy Dunlap
Config symbols that select LEDS_CLASS need to depend on NEW_LEDS so that undefined symbols are not used in the build. The alternative is to select NEW_LEDS, which some drivers do. This patch fixes the led_* symbols build errors. (.text+0x174cdc): undefined reference to `input_unregister_device' (.text+0x174d9f): undefined reference to `input_allocate_device' (.text+0x174e2d): undefined reference to `input_register_device' (.text+0x174e53): undefined reference to `input_free_device' rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' (.text+0x176eca): undefined reference to `input_unregister_polled_device' (.text+0x176efc): undefined reference to `input_free_polled_device' (.text+0x176f37): undefined reference to `input_free_polled_device' (.text+0x176fd8): undefined reference to `input_register_polled_device' (.text+0x1772c0): undefined reference to `led_classdev_resume' (.text+0x1772d4): undefined reference to `led_classdev_resume' (.text+0x1772e8): undefined reference to `led_classdev_resume' (.text+0x17730a): undefined reference to `led_classdev_suspend' (.text+0x17731e): undefined reference to `led_classdev_suspend' (.text+0x17732f): undefined reference to `led_classdev_suspend' rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' make[1]: *** [vmlinux] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13rt2x00: INPUT build failureRandy Dunlap
Config symbols that select RFKILL need to depend on INPUT so that undefined symbols are not used in the build. This patch fixes the input_* symbols build errors. (.text+0x174cdc): undefined reference to `input_unregister_device' (.text+0x174d9f): undefined reference to `input_allocate_device' (.text+0x174e2d): undefined reference to `input_register_device' (.text+0x174e53): undefined reference to `input_free_device' rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' (.text+0x176eca): undefined reference to `input_unregister_polled_device' (.text+0x176efc): undefined reference to `input_free_polled_device' (.text+0x176f37): undefined reference to `input_free_polled_device' (.text+0x176fd8): undefined reference to `input_register_polled_device' (.text+0x1772c0): undefined reference to `led_classdev_resume' (.text+0x1772d4): undefined reference to `led_classdev_resume' (.text+0x1772e8): undefined reference to `led_classdev_resume' (.text+0x17730a): undefined reference to `led_classdev_suspend' (.text+0x17731e): undefined reference to `led_classdev_suspend' (.text+0x17732f): undefined reference to `led_classdev_suspend' rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' make[1]: *** [vmlinux] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13b43: Fix noise calculation WARN_ONMichael Buesch
This removes a WARN_ON that is responsible for the following koops: http://www.kerneloops.org/searchweek.php?search=b43_generate_noise_sample The comment in the patch describes why it's safe to simply remove the check. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13b43: Fix possible NULL pointer dereference in DMA codeMichael Buesch
This fixes a possible NULL pointer dereference in an error path of the DMA allocation error checking code. This is also necessary for a future DMA API change that is on its way into the mainline kernel that adds an additional dev parameter to dma_mapping_error(). This patch moves the whole struct b43_dmaring struct initialization right before any DMA allocation operation. Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13rt2x00: Restrict DMA to 32-bit addresses.Gertjan van Wingerde
None of the rt2x00 PCI devices support 64-bit DMA addresses (they all only accept 32-bit buffer addresses). Hence it makes no sense to try to enable 64-bit DMA addresses. Only try to enable 32-bit DMA addresses. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13rt2x00: Don't kill guardian_urb when it wasn't createdIvo van Doorn
This fixes a "BUG: unable to handle kernel paging request" bug in rt73usb which was caused by killing the guardian_urb while it had never been allocated for rt73usb. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: tcp: Revert 'process defer accept as established' changes. ipv6: Fix duplicate initialization of rawv6_prot.destroy bnx2x: Updating the Maintainer net: Eliminate flush_scheduled_work() calls while RTNL is held. drivers/net/r6040.c: correct bad use of round_jiffies() fec_mpc52xx: MPC52xx_MESSAGES_DEFAULT: 2nd NETIF_MSG_IFDOWN => IFUP ipg: fix receivemode IPG_RM_RECEIVEMULTICAST{,HASH} in ipg_nic_set_multicast_list() netfilter: nf_conntrack: fix ctnetlink related crash in nf_nat_setup_info() netfilter: Make nflog quiet when no one listen in userspace. ipv6: Fail with appropriate error code when setting not-applicable sockopt. ipv6: Check IPV6_MULTICAST_LOOP option value. ipv6: Check the hop limit setting in ancillary data. ipv6 route: Fix route lifetime in netlink message. ipv6 mcast: Check address family of gf_group in getsockopt(MS_FILTER). dccp: Bug in initial acknowledgment number assignment dccp ccid-3: X truncated due to type conversion dccp ccid-3: TFRC reverse-lookup Bug-Fix dccp ccid-2: Bug-Fix - Ack Vectors need to be ignored on request sockets dccp: Fix sparse warnings dccp ccid-3: Bug-Fix - Zero RTT is possible
2008-06-12bnx2x: Updating the MaintainerEilon Greenstein
I would like to thank Eliezer Tamir for writing and maintaining the driver for the past two years. I will take over maintaining the bnx2x driver from now on. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-12net: Eliminate flush_scheduled_work() calls while RTNL is held.David S. Miller
If the RTNL is held when we invoke flush_scheduled_work() we could deadlock. One such case is linkwatch, it is a work struct which tries to grab the RTNL semaphore. The most common case are net driver ->stop() methods. The simplest conversion is to instead use cancel_{delayed_}work_sync() explicitly on the various work struct the driver uses. This is an OK transformation because these work structs are doing things like resetting the chip, restarting link negotiation, and so forth. And if we're bringing down the device, we're about to turn the chip off and reset it anways. So if we cancel a pending work event, that's fine here. Some drivers were working around this deadlock by using a msleep() polling loop of some sort, and those cases are converted to instead use cancel_{delayed_}work_sync() as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-11drivers/net/r6040.c: correct bad use of round_jiffies()Christophe Jaillet
Compared to other places in the kernel, I think that this driver misuses the function round_jiffies. Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11fec_mpc52xx: MPC52xx_MESSAGES_DEFAULT: 2nd NETIF_MSG_IFDOWN => IFUPRoel Kluin
Duplicate NETIF_MSG_IFDOWN, 2nd should be NETIF_MSG_IFUP Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Sylvain Munaut <tnt@246tNt.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11ipg: fix receivemode IPG_RM_RECEIVEMULTICAST{,HASH} in ↵Roel Kluin
ipg_nic_set_multicast_list() The branches are dead code. even when dev->flag IFF_MULTICAST (defined 0x1000) is set, dev->flags & IFF_MULTICAST & [boolean] always evaluates to 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits) net: Fix routing tables with id > 255 for legacy software sky2: Hold RTNL while calling dev_close() s2io iomem annotations atl1: fix suspend regression qeth: start dev queue after tx drop error qeth: Prepare-function to call s390dbf was wrong qeth: reduce number of kernel messages qeth: Use ccw_device_get_id(). qeth: layer 3 Oops in ip event handler virtio: use callback on empty in virtio_net virtio: virtio_net free transmit skbs in a timer virtio: Fix typo in virtio_net_hdr comments virtio_net: Fix skb->csum_start computation ehea: set mac address fix sfc: Recover from RX queue flush failure add missing lance_* exports ixgbe: fix typo forcedeth: msi interrupts ipsec: pfkey should ignore events when no listeners pppoe: Unshare skb before anything else ...
2008-06-11smc91x: fix build error from the SMC_GET_MAC_ADDR API changeBryan Wu
Cc: Jeff Garzik <jeff@garzik.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-10Merge branch 'davem-fixes' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-06-10sky2: Hold RTNL while calling dev_close()Ben Hutchings
dev_close() must be called holding the RTNL. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10s2io iomem annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10atl1: fix suspend regressionJay Cliburn
Using vendor magic to force the PHY into power save mode breaks suspend. It isn't needed anyway, so remove it. Tested-by: Avuton Olrich <avuton@gmail.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10virtio: use callback on empty in virtio_netRusty Russell
virtio_net uses a timer to free old transmitted packets, rather than leaving callbacks enabled all the time. If the host promises to always notify us when the transmit ring is empty, we can free packets at that point and avoid the timer. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10virtio: virtio_net free transmit skbs in a timerMark McLoughlin
virtio_net currently only frees old transmit skbs just before queueing new ones. If the queue is full, it then enables interrupts and waits for notification that more work has been performed. However, a side-effect of this scheme is that there are always xmit skbs left dangling when no new packets are sent, against the Documentation/networking/driver.txt guideline: "... it is not allowed for your TX mitigation scheme to let TX packets "hang out" in the TX ring unreclaimed forever if no new TX packets are sent." Add a timer to ensure that any time we queue new TX skbs, we will shortly free them again. This fixes an easily reproduced hang at shutdown where iptables attempts to unload nf_conntrack and nf_conntrack waits for an skb it is tracking to be freed, but virtio_net never frees it. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10virtio_net: Fix skb->csum_start computationMark McLoughlin
hdr->csum_start is the offset from the start of the ethernet header to the transport layer checksum field. skb->csum_start is the offset from skb->head. skb_partial_csum_set() assumes that skb->data points to the ethernet header - i.e. it computes skb->csum_start by adding the headroom to hdr->csum_start. Since eth_type_trans() skb_pull()s the ethernet header, skb_partial_csum_set() should be called before eth_type_trans(). (Without this patch, GSO packets from a guest to the world outside the host are corrupted). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10ehea: set mac address fixJan-Bernd Themann
eHEA has to call firmware functions in order to change the mac address of a logical port. This patch checks if the logical port is up when calling the register / deregister mac address calls. If the port is down these firmware calls would fail and are therefore not executed. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10sfc: Recover from RX queue flush failureSteve Hodgson
RX queue flush can fail if traffic continues to arrive. Recover by performing an invisible reset. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10add missing lance_* exportsAdrian Bunk
This patch fixes the following build error: <-- snip --> ... Building modules, stage 2. MODPOST 1203 modules ERROR: "lance_open" [drivers/net/mvme147.ko] undefined! ERROR: "lance_close" [drivers/net/mvme147.ko] undefined! ERROR: "lance_tx_timeout" [drivers/net/mvme147.ko] undefined! ERROR: "lance_set_multicast" [drivers/net/mvme147.ko] undefined! ERROR: "lance_start_xmit" [drivers/net/mvme147.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10ixgbe: fix typoJeff Kirsher
Define names were accidently transposed. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10forcedeth: msi interruptsAyaz Abdulla
Add a workaround for lost MSI interrupts. There is a race condition in the HW in which future interrupts could be missed. The workaround is to toggle the MSI irq mask. Added cleanup based on comments from Andrew Morton. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10pppoe: Unshare skb before anything elseHerbert Xu
We need to unshare the skb first as otherwise pskb_may_pull may write to a shared skb which could be bad. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10net pppoe: Check packet length on all receive pathsHerbert Xu
The length field in the PPPOE header wasn't checked completely. This patch causes all packets shorter than the declared length to be dropped. It also changes the memcpy_toiovec call to skb_copy_datagram_iovec so that paged packets (rare for PPPOE) are handled properly. Thanks to Ilja of the Netric Security Team for discovering and reporting this bug, and Chris Wright for the total_len check. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10l2tp: Fix potential memory corruption in pppol2tp_recvmsg()James Chapman
This patch fixes a potential memory corruption in pppol2tp_recvmsg(). If skb->len is bigger than the caller's buffer length, memcpy_toiovec() will go into unintialized data on the kernel heap, interpret it as an iovec and start modifying memory. The fix is to change the memcpy_toiovec() call to skb_copy_datagram_iovec() so that paged packets (rare for PPPOL2TP) are handled properly. Also check that the caller's buffer is big enough for the data and set the MSG_TRUNC flag if it is not so. Reported-by: Ilja <ilja@netric.org> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-09irda: net/irda build fix: mcs7780Ingo Molnar
-tip testing found the following build error: drivers/built-in.o: In function `mcs_receive_irq': mcs7780.c:(.text+0x4e429): undefined reference to `crc32_le' drivers/built-in.o: In function `mcs_hard_xmit': mcs7780.c:(.text+0x4e9af): undefined reference to `crc32_le' with: http://redhat.com/~mingo/misc/config-Sun_Jun__8_22_56_14_CEST_2008.bad the reason is a missing enablement of the CRC32 library in the Kconfig. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-09tg3: Update version to 3.92.1Matt Carlson
This patch increments the version to 3.92.1. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-09tg3: Fix 5761 WOLMatt Carlson
On 5761 non-e devices, two problems prevent the administrator from overriding the WOL settings in the device's NVRAM. The first problem is that GPIO 0 and GPIO 2 have been swapped. This change prevented the administrator from turning on WOL when it is disabled in NVRAM. The fix is to add a new path for the 5761 that swaps the two GPIOs in the code as well. The second problem is that GPIO 1 could not be toggled by the driver because the GPIO is shared with the debug UART GPIO. This will prevent the administrator from being able to turn WOL off if it was enabled in NVRAM. The fix is to always disable the debug UART after a GRC reset. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-09tg3: Fix a flags typoMatt Carlson
This patch fixes a problem where the TG3_FLAG_10_100_ONLY flag was testing against the wrong flags variable. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-09tg3: Fix 5714S / 5715S / 5780S link failuresMatt Carlson
The git commit ef167e27039eeaea6d3cdd5c547b082e89840bdd entitled "Fix supporting flowctrl code" introduced a bug that prevents 5714S, 5715S and 5780S devices from falling back to a forced link mode. The problem is that the added flow control check will always fail if flow control is set to autoneg and either RX or TX (or both) flow control is enabled. The driver defaults to setting flow control to autoneg and advertises both RX and TX flow control. The fix is to remove the errant check. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-09iwlwifi: fix oops in iwl3945_led_brightness_setMarcin Slusarz
fix race between: ieee80211_open->ieee80211_led_radio->led_trigger_event->led_set_brightness->iwl3945_led_brightness_set (which assumes that "led->priv" is not NULL) and iwl3945_pci_probe->iwl3945_setup_deferred_work->(...)->iwl3945_bg_alive_start->iwl3945_alive_start->iwl3945_led_register->iwl3945_led_register_led which sets priv field in struct iwl3945_led after led->led_dev.brightness_set = iwl3945_led_brightness_set; (...) led_classdev_register(device, &led->led_dev); http://kerneloops.org/guilty.php?guilty=iwl3945_led_brightness_set&version=2.6.25-release&start=1671168&end=1703935&class=oops Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: linux-wireless@vger.kernel.org Cc: ipw3945-devel@lists.sourceforge.net Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-09zd1211rw: Fix data padding for QoSMichael Buesch
This patch fixes a data alignment issue in the zd1211rw driver. The IEEE80211_STYPE_QOS_DATA bit should be used as a bitwise test to test for the presence of the 2 byte QoS control field. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-19 04:14:00 +0000