summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-01-15net: vrf: do not allow table id 0David Ahern
[ Upstream commit 24c63bbc18e25d5d8439422aa5fd2d66390b88eb ] Frank reported that vrf devices can be created with a table id of 0. This breaks many of the run time table id checks and should not be allowed. Detect this condition at create time and fail with EINVAL. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Reported-by: Frank Kellermann <frank.kellermann@atos.net> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-15net: ipv4: Fix multipath selection with vrfDavid Ahern
[ Upstream commit 7a18c5b9fb31a999afc62b0e60978aa896fc89e9 ] fib_select_path does not call fib_select_multipath if oif is set in the flow struct. For VRF use cases oif is always set, so multipath route selection is bypassed. Use the FLOWI_FLAG_SKIP_NH_OIF to skip the oif check similar to what is done in fib_table_lookup. Add saddr and proto to the flow struct for the fib lookup done by the VRF driver to better match hash computation for a flow. Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-15r8152: fix rx issue for runtime suspendhayeswang
[ Upstream commit 75dc692eda114cb234a46cb11893a9c3ea520934 ] Pause the rx and make sure the rx fifo is empty when the autosuspend occurs. If the rx data comes when the driver is canceling the rx urb, the host controller would stop getting the data from the device and continue it after next rx urb is submitted. That is, one continuing data is split into two different urb buffers. That let the driver take the data as a rx descriptor, and unexpected behavior happens. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-15r8152: split rtl8152_suspend functionhayeswang
[ Upstream commit 8fb280616878b81c0790a0c33acbeec59c5711f4 ] Split rtl8152_suspend() into rtl8152_system_suspend() and rtl8152_rumtime_suspend(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-15net/mlx5: Avoid shadowing numa_nodeEli Cohen
[ Upstream commit d151d73dcc99de87c63bdefebcc4cb69de1cdc40 ] Avoid using a local variable named numa_node to avoid shadowing a public one. Fixes: db058a186f98 ('net/mlx5_core: Set irq affinity hints') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-15net/mlx5: Check FW limitations on log_max_qp before setting itNoa Osherovich
[ Upstream commit 883371c453b937f9eb581fb4915210865982736f ] When setting HCA capabilities, set log_max_qp to be the minimum between the selected profile's value and the HCA limitation. Fixes: 938fe83c8dcb ('net/mlx5_core: New device capabilities...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-15net: stmmac: Fix race between stmmac_drv_probe and stmmac_openFlorian Fainelli
[ Upstream commit 5701659004d68085182d2fd4199c79172165fa65 ] There is currently a small window during which the network device registered by stmmac can be made visible, yet all resources, including and clock and MDIO bus have not had a chance to be set up, this can lead to the following error to occur: [ 473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): stmmac_dvr_probe: warning: cannot get CSR clock [ 473.919382] stmmaceth 0000:01:00.0: no reset control found [ 473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42 [ 473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported [ 473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported [ 473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported [ 473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer [ 473.921395] libphy: PHY stmmac-1:00 not found [ 473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY [ 473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to PHY (error: -19) [ 473.959710] libphy: stmmac: probed [ 473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL (stmmac-1:00) active [ 473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL (stmmac-1:01) [ 473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL (stmmac-1:02) [ 473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL (stmmac-1:03) Fix this by making sure that register_netdev() is the last thing being done, which guarantees that the clock and the MDIO bus are available. Fixes: 4bfcbd7abce2 ("stmmac: Move the mdio_register/_unregister in probe/remove") Reported-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-15net: vrf: Drop conntrack data after pass through VRF device on TxDavid Ahern
[ Upstream commit eb63ecc1706b3e094d0f57438b6c2067cfc299f2 ] Locally originated traffic in a VRF fails in the presence of a POSTROUTING rule. For example, $ iptables -t nat -A POSTROUTING -s 11.1.1.0/24 -j MASQUERADE $ ping -I red -c1 11.1.1.3 ping: Warning: source address might be selected on device other than red. PING 11.1.1.3 (11.1.1.3) from 11.1.1.2 red: 56(84) bytes of data. ping: sendmsg: Operation not permitted Worse, the above causes random corruption resulting in a panic in random places (I have not seen a consistent backtrace). Call nf_reset to drop the conntrack info following the pass through the VRF device. The nf_reset is needed on Tx but not Rx because of the order in which NF_HOOK's are hit: on Rx the VRF device is after the real ingress device and on Tx it is is before the real egress device. Connection tracking should be tied to the real egress device and not the VRF device. Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-15netvsc: reduce maximum GSO sizestephen hemminger
[ Upstream commit a50af86dd49ee1851d1ccf06dd0019c05b95e297 ] Hyper-V (and Azure) support using NVGRE which requires some extra space for encapsulation headers. Because of this the largest allowed TSO packet is reduced. For older releases, hard code a fixed reduced value. For next release, there is a better solution which uses result of host offload negotiation. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12net: vxge: avoid unused function warningsArnd Bergmann
commit 57e7c8cef224af166b8ec932b5e383641418c005 upstream. When CONFIG_PCI_MSI is disabled, we get warnings about unused functions in the vxge driver: drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning: 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function] drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning: 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function] We could add another #ifdef here, but it's nicer to avoid those warnings for good by converting the existing #ifdef to if(IS_ENABLED()), which has the same effect but provides better compile-time coverage in general, and lets the compiler understand better when the function is intentionally unused. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12net: ti: cpmac: Fix compiler warning due to type confusionPaul Burton
commit 2f5281ba2a8feaf6f0aee93356f350855bb530fc upstream. cpmac_start_xmit() used the max() macro on skb->len (an unsigned int) and ETH_ZLEN (a signed int literal). This led to the following compiler warning: In file included from include/linux/list.h:8:0, from include/linux/module.h:9, from drivers/net/ethernet/ti/cpmac.c:19: drivers/net/ethernet/ti/cpmac.c: In function 'cpmac_start_xmit': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); \ ^ drivers/net/ethernet/ti/cpmac.c:560:8: note: in expansion of macro 'max' len = max(skb->len, ETH_ZLEN); ^ On top of this, it assigned the result of the max() macro to a signed integer whilst all further uses of it result in it being cast to varying widths of unsigned integer. Fix this up by using max_t to ensure the comparison is performed as unsigned integers, and for consistency change the type of the len variable to unsigned int. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12ath10k: use the right length of "background"Nicolas Iooss
commit 31b239824ece321c09bdb8e61e1d14814eaba38b upstream. The word "background" contains 10 characters so the third argument of strncmp() need to be 10 in order to match this prefix correctly. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Fixes: 855aed1220d2 ("ath10k: add spectral scan feature") Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09net: mvpp2: fix dma unmapping of TX buffers for fragmentsThomas Petazzoni
commit 8354491c9d5b06709384cea91d13019bf5e61449 upstream. Since commit 71ce391dfb784 ("net: mvpp2: enable proper per-CPU TX buffers unmapping"), we are not correctly DMA unmapping TX buffers for fragments. Indeed, the mvpp2_txq_inc_put() function only stores in the txq_cpu->tx_buffs[] array the physical address of the buffer to be DMA-unmapped when skb != NULL. In addition, when DMA-unmapping, we use skb_headlen(skb) to get the size to be unmapped. Both of this works fine for TX descriptors that are associated directly to a SKB, but not the ones that are used for fragments, with a NULL pointer as skb: - We have a NULL physical address when calling DMA unmap - skb_headlen(skb) crashes because skb is NULL This causes random crashes when fragments are used. To solve this problem, we need to: - Store the physical address of the buffer to be unmapped unconditionally, regardless of whether it is tied to a SKB or not. - Store the length of the buffer to be unmapped, which requires a new field. Instead of adding a third array to store the length of the buffer to be unmapped, and as suggested by David Miller, this commit refactors the tx_buffs[] and tx_skb[] arrays of 'struct mvpp2_txq_pcpu' into a separate structure 'mvpp2_txq_pcpu_buf', to which a 'size' field is added. Therefore, instead of having three arrays to allocate/free, we have a single one, which also improve data locality, reducing the impact on the CPU cache. Fixes: 71ce391dfb784 ("net: mvpp2: enable proper per-CPU TX buffers unmapping") Reported-by: Raphael G <raphael.glon@corp.ovh.com> Cc: Raphael G <raphael.glon@corp.ovh.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09ath9k: Really fix LED polarity for some Mini PCI AR9220 MB92 cards.Vittorio Gambaletta (VittGam)
commit 79e57dd113d307a6c74773b8aaecf5442068988a upstream. The active_high LED of my Wistron DNMA-92 is still being recognized as active_low on 4.7.6 mainline. When I was preparing my former commit 0f9edcdd88a9 ("ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.") to fix that I must have somehow messed up with testing, because I tested the final version of that patch before sending it, and it was apparently working; but now it is not working on 4.7.6 mainline. I initially added the PCI_DEVICE_SUB section for 0x0029/0x2096 above the PCI_VDEVICE section for 0x0029; but then I moved the former below the latter after seeing how 0x002A sections were sorted in the file. This turned out to be wrong: if a generic PCI_VDEVICE entry (that has both subvendor and subdevice IDs set to PCI_ANY_ID) is put before a more specific one (PCI_DEVICE_SUB), then the generic PCI_VDEVICE entry will match first and will be used. With this patch, 0x0029/0x2096 has finally got active_high LED on 4.7.6. While I'm at it, let's fix 0x002A too by also moving its generic definition below its specific ones. Fixes: 0f9edcdd88a9 ("ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.") Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> [kvalo@qca.qualcomm.com: improve the commit log based on email discussions] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09rtlwifi: Fix enter/exit power_saveLarry Finger
commit ba9f93f82abafe2552eac942ebb11c2df4f8dd7f upstream. In commit a5ffbe0a1993 ("rtlwifi: Fix scheduling while atomic bug") and commit a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue"), an error was introduced in the power-save routines due to the fact that leaving PS was delayed by the use of a work queue. This problem is fixed by detecting if the enter or leave routines are in interrupt mode. If so, the workqueue is used to place the request. If in normal mode, the enter or leave routines are called directly. Fixes: a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue") Reported-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ppp: defer netns reference release for ppp channelWANG Cong
commit 205e1e255c479f3fd77446415706463b282f94e4 upstream. Matt reported that we have a NULL pointer dereference in ppp_pernet() from ppp_connect_channel(), i.e. pch->chan_net is NULL. This is due to that a parallel ppp_unregister_channel() could happen while we are in ppp_connect_channel(), during which pch->chan_net set to NULL. Since we need a reference to net per channel, it makes sense to sync the refcnt with the life time of the channel, therefore we should release this reference when we destroy it. Fixes: 1f461dcdd296 ("ppp: take reference on channels netns") Reported-by: Matt Bennett <Matt.Bennett@alliedtelesis.co.nz> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: bmajal222 <bmajal222@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-15can: peak: fix bad memory access and free sequence추지호
commit b67d0dd7d0dc9e456825447bbeb935d8ef43ea7c upstream. Fix for bad memory access while disconnecting. netdev is freed before private data free, and dev is accessed after freeing netdev. This makes a slub problem, and it raise kernel oops with slub debugger config. Signed-off-by: Jiho Chu <jiho.chu@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-10geneve: avoid use-after-free of skb->dataSabrina Dubroca
[ Upstream commit 5b01014759991887b1e450c9def01e58c02ab81b ] geneve{,6}_build_skb can end up doing a pskb_expand_head(), which makes the ip_hdr(skb) reference we stashed earlier stale. Since it's only needed as an argument to ip_tunnel_ecn_encap(), move this directly in the function call. Fixes: 08399efc6319 ("geneve: ensure ECN info is handled properly in all tx/rx paths") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-10sh_eth: remove unchecked interrupts for RZ/A1Chris Brandt
[ Upstream commit 33d446dbba4d4d6a77e1e900d434fa99e0f02c86 ] When streaming a lot of data and the RZ/A1 can't keep up, some status bits will get set that are not being checked or cleared which cause the following messages and the Ethernet driver to stop working. This patch fixes that issue. irq 21: nobody cared (try booting with the "irqpoll" option) handlers: [<c036b71c>] sh_eth_interrupt Disabling IRQ #21 Fixes: db893473d313a4ad ("sh_eth: Add support for r7s72100") Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-10net: bcmgenet: Utilize correct struct device for all DMA operationsFlorian Fainelli
[ Upstream commit 8c4799ac799665065f9bf1364fd71bf4f7dc6a4a ] __bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the same struct device during unmap that was used for the map operation, which makes DMA-API debugging warn about it. Fix this by always using &priv->pdev->dev throughout the driver, using an identical device reference for all map/unmap calls. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-10net: dsa: bcm_sf2: Ensure we re-negotiate EEE during after link changeFlorian Fainelli
[ Upstream commit 76da8706d90d8641eeb9b8e579942ed80b6c0880 ] In case the link change and EEE is enabled or disabled, always try to re-negotiate this with the link partner. Fixes: 450b05c15f9c ("net: dsa: bcm_sf2: add support for controlling EEE") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-10net: sky2: Fix shutdown crashJeremy Linton
[ Upstream commit 06ba3b2133dc203e1e9bc36cee7f0839b79a9e8b ] The sky2 frequently crashes during machine shutdown with: sky2_get_stats+0x60/0x3d8 [sky2] dev_get_stats+0x68/0xd8 rtnl_fill_stats+0x54/0x140 rtnl_fill_ifinfo+0x46c/0xc68 rtmsg_ifinfo_build_skb+0x7c/0xf0 rtmsg_ifinfo.part.22+0x3c/0x70 rtmsg_ifinfo+0x50/0x5c netdev_state_change+0x4c/0x58 linkwatch_do_dev+0x50/0x88 __linkwatch_run_queue+0x104/0x1a4 linkwatch_event+0x30/0x3c process_one_work+0x140/0x3e0 worker_thread+0x60/0x44c kthread+0xdc/0xf0 ret_from_fork+0x10/0x50 This is caused by the sky2 being called after it has been shutdown. A previous thread about this can be found here: https://lkml.org/lkml/2016/4/12/410 An alternative fix is to assure that IFF_UP gets cleared by calling dev_close() during shutdown. This is similar to what the bnx2/tg3/xgene and maybe others are doing to assure that the driver isn't being called following _shutdown(). Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-10virtio-net: add a missing synchronize_net()Eric Dumazet
[ Upstream commit 963abe5c8a0273a1cf5913556da1b1189de0e57a ] It seems many drivers do not respect napi_hash_del() contract. When napi_hash_del() is used before netif_napi_del(), an RCU grace period is needed before freeing NAPI object. Fixes: 91815639d880 ("virtio-net: rx busy polling support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-08mwifiex: printk() overflow with 32-byte SSIDsBrian Norris
commit fcd2042e8d36cf644bd2d69c26378d17158b17df upstream. SSIDs aren't guaranteed to be 0-terminated. Let's cap the max length when we print them out. This can be easily noticed by connecting to a network with a 32-octet SSID: [ 3903.502925] mwifiex_pcie 0000:01:00.0: info: trying to associate to '0123456789abcdef0123456789abcdef <uninitialized mem>' bssid xx:xx:xx:xx:xx:xx Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26iwlwifi: pcie: fix SPLC structure parsingLuca Coelho
commit e0d9727c111a5917a1184c71c1a8e6f78c7fc41d upstream. The SPLC data parsing is too restrictive and was not trying find the correct element for WiFi. This causes problems with some BIOSes where the SPLC method exists, but doesn't have a WiFi entry on the first element of the list. The domain type values are also incorrect according to the specification. Fix this by complying with the actual specification. Additionally, replace all occurrences of SPLX to SPLC, since SPLX is only a structure internal to the ACPI tables, and may not even exist. Fixes: bcb079a14d75 ("iwlwifi: pcie: retrieve and parse ACPI power limitations") Reported-by: Chris Rorvick <chris@rorvick.com> Tested-by: Paul Bolle <pebolle@tiscali.nl> Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-21bgmac: stop clearing DMA receive control register right after it is setAndy Gospodarek
[ Upstream commit fcdefccac976ee51dd6071832b842d8fb41c479c ] Current bgmac code initializes some DMA settings in the receive control register for some hardware and then immediately clears those settings. Not clearing those settings results in ~420Mbps *improvement* in throughput; this system can now receive frames at line-rate on Broadcom 5871x hardware compared to ~520Mbps today. I also tested a few other values but found there to be no discernible difference in CPU utilization even if burst size and prefetching values are different. On the hardware tested there was no need to keep the code that cleared all but bits 16-17, but since there is a wide variety of hardware that used this driver (I did not look at all hardware docs for hardware using this IP block), I find it wise to move this call up and clear bits just after reading the default value from the hardware rather than completely removing it. This is a good candidate for -stable >=3.14 since that is when the code that was supposed to improve performance (but did not) was introduced. Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Fixes: 56ceecde1f29 ("bgmac: initialize the DMA controller of core...") Cc: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-18i40e: fix call of ndo_dflt_bridge_getlink()Huaibin Wang
commit 599b076d15ee3ead7af20fc907079df00b2d59a0 upstream. Order of arguments is wrong. The wrong code has been introduced by commit 7d4f8d871ab1, but is compiled only since commit 9df70b66418e. Note that this may break netlink dumps. Fixes: 9df70b66418e ("i40e: Remove incorrect #ifdef's") Fixes: 7d4f8d871ab1 ("switchdev; add VLAN support for port's bridge_getlink") CC: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Huaibin Wang <huaibin.wang@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-15net: add recursion limit to GROSabrina Dubroca
[ Upstream commit fcd91dd449867c6bfe56a81cabba76b829fd05cd ] Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-15net: fec: set mac address unconditionallyGavin Schenk
[ Upstream commit b82d44d78480faff7456e9e0999acb9d38666057 ] If the mac address origin is not dt, you can only safely assign a mac address after "link up" of the device. If the link is off the clocks are disabled and because of issues assigning registers when clocks are off the new mac address cannot be written in .ndo_set_mac_address() on some soc's. This fix sets the mac address unconditionally in fec_restart(...) and ensures consistency between fec registers and the network layer. Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de> Acked-by: Fugang Duan <fugang.duan@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9638d19e4816 ("net: fec: add netif status check before set mac address") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-15tg3: Avoid NULL pointer dereference in tg3_io_error_detected()Milton Miller
[ Upstream commit 1b0ff89852d79354e8a091c81a88df21f5aa9f0a ] While the driver is probing the adapter, an error may occur before the netdev structure is allocated and attached to pci_dev. In this case, not only netdev isn't available, but the tg3 private structure is also not available as it is just math from the NULL pointer, so dereferences must be skipped. The following trace is seen when the error is triggered: [1.402247] Unable to handle kernel paging request for data at address 0x00001a99 [1.402410] Faulting instruction address: 0xc0000000007e33f8 [1.402450] Oops: Kernel access of bad area, sig: 11 [#1] [1.402481] SMP NR_CPUS=2048 NUMA PowerNV [1.402513] Modules linked in: [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000 [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0 [1.402787] REGS: c000001fe4e8b790 TRAP: 0300 Not tainted (4.4.0-36-generic) [1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28000422 XER: 20000000 [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1 GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000 GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299 GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006 GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768 GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002 GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000 [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340 [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340 This patch avoids the NULL pointer dereference by moving the access after the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan]. Fixes: 0486a063b1ff ("tg3: prevent ifup/ifdown during PCI error recovery") Fixes: dfc8f370316b ("net/tg3: Release IRQs on permanent error") Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10smc91x: avoid self-comparison warningArnd Bergmann
commit e3ebd894f084255fde19116955ba7054858ff5d6 upstream. The smc91x driver defines a macro that compares its argument to itself, apparently to get a true result while using its argument to avoid a warning about unused local variables. Unfortunately, this triggers a warning with gcc-6, as the comparison is obviously useless: drivers/net/ethernet/smsc/smc91x.c: In function 'smc_hardware_send_pkt': drivers/net/ethernet/smsc/smc91x.c:563:14: error: self-comparison always evaluates to true [-Werror=tautological-compare] if (!smc_special_trylock(&lp->lock, flags)) { This replaces the macro with another one that behaves similarly, with a cast to (void) to ensure the argument is used, and using a literal 'true' as its value. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-31mwifiex: correct aid value during tdls setupXinming Hu
commit b64db1b252e9974a43a51ba083fa7d03e4716167 upstream. AID gets updated during TDLS setup, but modified value isn't reflected in "priv->assoc_rsp_buf". This causes TDLS setup failure. The problem is fixed here. Fixes: 4aff53ef18e4a4 ("mwifiex: parsing aid while receiving..") Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-31brcmfmac: avoid potential stack overflow in brcmf_cfg80211_start_ap()Arend Van Spriel
commit ded89912156b1a47d940a0c954c43afbabd0c42c upstream. User-space can choose to omit NL80211_ATTR_SSID and only provide raw IE TLV data. When doing so it can provide SSID IE with length exceeding the allowed size. The driver further processes this IE copying it into a local variable without checking the length. Hence stack can be corrupted and used as exploit. Reported-by: Daxing Guo <freener.gdx@gmail.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Juerg Haefliger <juerg.haefliger@hpe.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28net/mlx4_core: Allow resetting VF admin mac to zeroJack Morgenstein
commit 6e5224224faa50ec4c8949dcefadf895e565f0d1 upstream. The VF administrative mac addresses (stored in the PF driver) are initialized to zero when the PF driver starts up. These addresses may be modified in the PF driver through ndo calls initiated by iproute2 or libvirt. While we allow the PF/host to change the VF admin mac address from zero to a valid unicast mac, we do not allow restoring the VF admin mac to zero. We currently only allow changing this mac to a different unicast mac. This leads to problems when libvirt scripts are used to deal with VF mac addresses, and libvirt attempts to revoke the mac so this host will not use it anymore. Fix this by allowing resetting a VF administrative MAC back to zero. Fixes: 8f7ba3ca12f6 ('net/mlx4: Add set VF mac address support') Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reported-by: Moshe Levi <moshele@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Juerg Haefliger <juerg.haefliger@hpe.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28bnx2x: Prevent false warning for lack of FC NPIVYuval Mintz
commit 1e6bb1a3540fec3ef112b9a89dda88e684c3ff59 upstream. Not all adapters have FC-NPIV configured. If bnx2fc is used with such an adapter, driver would read irrelevant data from the the nvram and log "FC-NPIV table with bad length..." In system logs. Simply accept that reading '0' as the feature offset in nvram indicates the feature isn't there and return. Reported-by: Andrew Patterson <andrew.patterson@hpe.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Juerg Haefliger <juerg.haefliger@hpe.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28rtlwifi: Fix missing country code for Great BritainLarry Finger
commit 0c9d3491530773858ff9d705ec2a9c382f449230 upstream. Some RTL8821AE devices sold in Great Britain have the country code of 0x25 encoded in their EEPROM. This value is not tested in the routine that establishes the regulatory info for the chip. The fix is to set this code to have the same capabilities as the EU countries. In addition, the channels allowed for COUNTRY_CODE_ETSI were more properly suited for China and Israel, not the EU. This problem has also been fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-22brcmfmac: fix memory leak in brcmf_fill_bss_paramRafał Miłecki
commit 23e9c128adb2038c27a424a5f91136e7fa3e0dc6 upstream. This function is called from get_station callback which means that every time user space was getting/dumping station(s) we were leaking 2 KiB. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 1f0dc59a6de ("brcmfmac: rework .get_station() callback") Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-22i40e: avoid NULL pointer dereference and recursive errors on early PCI errorGuilherme G Piccoli
commit edfc23ee3e0ebbb6713d7574ab1b00abff178f6c upstream. Although rare, it's possible to hit PCI error early on device probe, meaning possibly some structs are not entirely initialized, and some might even be completely uninitialized, leading to NULL pointer dereference. The i40e driver currently presents a "bad" behavior if device hits such early PCI error: firstly, the struct i40e_pf might not be attached to pci_dev yet, leading to a NULL pointer dereference on access to pf->state. Even checking if the struct is NULL and avoiding the access in that case isn't enough, since the driver cannot recover from PCI error that early; in our experiments we saw multiple failures on kernel log, like: [549.664] i40e 0007:01:00.1: Initial pf_reset failed: -15 [549.664] i40e: probe of 0007:01:00.1 failed with error -15 [...] [871.644] i40e 0007:01:00.1: The driver for the device stopped because the device firmware failed to init. Try updating your NVM image. [871.644] i40e: probe of 0007:01:00.1 failed with error -32 [...] [872.516] i40e 0007:01:00.0: ARQ: Unknown event 0x0000 ignored Between the first probe failure (error -15) and the second (error -32) another PCI error happened due to the first bad probe. Also, driver started to flood console with those ARQ event messages. This patch will prevent these issues by allowing error recovery mechanism to remove the failed device from the system instead of trying to recover from early PCI errors during device probe. Signed-off-by: Guilherme G Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07brcmsmac: Initialize power in brcms_c_stf_ss_algo_channel_get()Florian Fainelli
commit f823a2aa8f4674c095a5413b9e3ba12d82df06f2 upstream. wlc_phy_txpower_get_current() does a logical OR of power->flags, which presumes that power.flags was initiliazed earlier by the caller, unfortunately, this is not the case, so make sure we zero out the struct tx_power before calling into wlc_phy_txpower_get_current(). Reported-by: coverity (CID 146011) Fixes: 5b435de0d7868 ("net: wireless: add brcm80211 drivers") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07brcmsmac: Free packet if dma_mapping_error() fails in dma_rxfillFlorian Fainelli
commit 5c5fa1f464ac954982df1d96b9f9a5103d21aedd upstream. In case dma_mapping_error() returns an error in dma_rxfill, we would be leaking a packet that we allocated with brcmu_pkt_buf_get_skb(). Reported-by: coverity (CID 1081819) Fixes: 67d0cf50bd32 ("brcmsmac: Fix WARNING caused by lack of calls to dma_mapping_error()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chainFlorian Fainelli
commit 3bdae810721b33061d2e541bd78a70f86ca42af3 upstream. In case brcmf_sdiod_recv_chain() cannot complete a succeful call to brcmf_sdiod_buffrw, we would be leaking glom_skb and not free it as we should, fix this. Reported-by: coverity (CID 1164856) Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07ath9k: Fix programming of minCCA power thresholdSven Eckelmann
commit aaab50fcea78ae3414c3afc25aae8d0603df34d0 upstream. The function ar9003_hw_apply_minccapwr_thresh takes as second parameter not a pointer to the channel but a boolean value describing whether the channel is 2.4GHz or not. This broke (according to the origin commit) the ETSI regulatory compliance on 5GHz channels. Fixes: 3533bf6b15a0 ("ath9k: Fix regulatory compliance") Signed-off-by: Sven Eckelmann <sven@narfation.org> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlmvm: mvm: set correct state in smart-fifo configurationstriebit
commit 849a9627299100ae3f0ce573fc87d2b476f3bb59 upstream. Currently the state sent in SF configuration is always FULL_ON. This commit sets the correct state (e.g. INIT_OFF when station is not associated). Fixes: commit f4a3ee493e69 ("iwlwifi: mvm: Always enable the smart FIFO") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlwifi: mvm: don't use ret when not initialisedEmmanuel Grumbach
commit ff6e58e648ed5f3cc43891767811d5c3c88bbd41 upstream. fw-dbg code return ret but that variable was either 0 or not initialised. Return 0 always. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: 6a95126763fb ("iwlwifi: mvm: send dbg config hcmds to fw if set in tlv") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlwifi: pcie: fix access to scratch bufferSara Sharon
commit d5d0689aefc59c6a5352ca25d7e6d47d03f543ce upstream. This fixes a pretty ancient bug that hasn't manifested itself until now. The scratchbuf for command queue is allocated only for 32 slots but is accessed with the queue write pointer - which can be up to 256. Since the scratch buf size was 16 and there are up to 256 TFDs we never passed a page boundary when accessing the scratch buffer, but when attempting to increase the size of the scratch buffer a panic was quick to follow when trying to access the address resulted in a page boundary. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: 38c0f334b359 ("iwlwifi: use coherent DMA memory for command header") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07i40e: avoid null pointer dereferenceHeinrich Schuchardt
commit cd956722167ba4fdba9c1ce3eed251b04ea2e10f upstream. In function i40e_debug_aq parameter desc is assumed to be possibly NULL. Do not dereference it before checking the value. Fixes: f905dd62be88 ("i40e/i40evf: add max buf len to aq debug print helper") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlwifi: mvm: fix a few firmware capability checksJohannes Berg
commit 280a3efa82fccc9532c968a77e5162cb9f0af497 upstream. My cleanup in "iwlwifi: prepare for higher API/CAPA bits" accidentally inverted a few tests - fix them. Fixes: 859d914c8f5c ("iwlwifi: prepare for higher API/CAPA bits") Reported-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07can: dev: fix deadlock reported after bus-offSergei Miroshnichenko
commit 9abefcb1aaa58b9d5aa40a8bb12c87d02415e4c8 upstream. A timer was used to restart after the bus-off state, leading to a relatively large can_restart() executed in an interrupt context, which in turn sets up pinctrl. When this happens during system boot, there is a high probability of grabbing the pinctrl_list_mutex, which is locked already by the probe() of other device, making the kernel suspect a deadlock condition [1]. To resolve this issue, the restart_timer is replaced by a delayed work. [1] https://github.com/victronenergy/venus/issues/24 Signed-off-by: Sergei Miroshnichenko <sergeimir@emcraft.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30can: flexcan: fix resume functionFabio Estevam
commit 4de349e786a3a2d51bd02d56f3de151bbc3c3df9 upstream. On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30net: smc91x: fix SMC accessesRussell King
[ Upstream commit 2fb04fdf30192ff1e2b5834e9b7745889ea8bbcb ] Commit b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 06:59:23 +0000