summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-01-28bcm43xx: mark as obsolete and schedule for removalJohn W. Linville
Schedule bcm43xx for for removal in the 2.6.26 development window. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TUN]: Use iov_length()Akinobu Mita
Use iov_length() instead of tun's homemade iov_total(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[MACVLAN]: Allow setting mac address while device is upPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[MACVLAN]: Remove unnecessary IFF_UP checkPatrick McHardy
Only devices that are UP are in the hash, so macvlan_broadcast() doesn't need to check for IFF_UP. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETPOLL]: no need to store local_macStephen Hemminger
The local_mac is managed by the network device, no need to keep a spare copy and all the management problems that could cause. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CAN]: Add virtual CAN netdevice driverOliver Hartkopp
This patch adds the virtual CAN bus (vcan) network driver. The vcan device is just a loopback device for CAN frames, no real CAN hardware is involved. Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: Urs Thuermann <urs.thuermann@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28Merge branch 'pxa-plat' into develRussell King
* pxa-plat: (53 commits) [ARM] 4762/1: Basic support for Toradex Colibri module [ARM] pxa: fix mci_init functions returning -1 [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 [ARM] 4746/1: pcm027: network support for phyCORE-PXA270 [ARM] 4745/1: pcm027: default configuration [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module [NET] smc91x: Make smc91x use IRQ resource trigger flags [ARM] pxa: add default config for littleton [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) [ARM] 4664/1: Add basic support for HTC Magician PDA phones [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. [ARM] pxa: skip registers saving/restoring if entering standby mode [ARM] pxa: fix PXA27x resume [ARM] pxa: Avoid fiddling with CKEN register on suspend [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme [ARM] pxa: Add zylonite MFP wakeup configurations [ARM] pxa: program MFPs for low power mode when suspending [ARM] pxa: make MFP configuration processor independent [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions ... Conflicts: arch/arm/mach-pxa/ssp.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4762/1: Basic support for Toradex Colibri moduleDaniel Mack
This patch adds support for Toradex' PXA27x based Colibri module. It's kept as simple as possible to only provide basic functionality. A default config is also included. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4746/1: pcm027: network support for phyCORE-PXA270Robert Schwebel
This patch adds SMC91x support for the phyCORE-PXA270 CPU module (aka PCM-027). Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[NET] smc91x: Make smc91x use IRQ resource trigger flagsRussell King
smc91x is shared between many different platforms. Each platform needs to specify the interrupt type, and in some cases the irq type depends on more than just the build configuration - it depends on runtime checks. Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide a way for these flags to be passed via the IRQ resource itself. Note that IRQF_TRIGGER_* constants are intentionally defined to correspond with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that the low bits of PCI iomem resources correspond with the BAR flag bits. Also provide a way to configure smc91x to read the IRQ flags from the resource. Once all platforms have been converted over (signified by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should be removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-26[ARM] 4764/1: [AT91] AT91CAP9 core supportAndrew Victor
Add support for Atmel's AT91CAP9 Customizable Microcontroller family. <http://www.atmel.com/products/AT91CAP/Default.asp> Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-25mlx4_core: Fix max_eqs masking in QUERY_DEV_CAPJack Morgenstein
log_max_eqs is a 4-bit field, not a 3-bit field in the response to the QUERY_DEV_CAP FW command, so we should mask with 0xf instead of 0x7 when reading it. Found by Yossi Leybovitch of Mellanox. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-24Kobject: convert drivers/* from kobject_unregister() to kobject_put()Greg Kroah-Hartman
There is no need for kobject_unregister() anymore, thanks to Kay's kobject cleanup changes, so replace all instances of it with kobject_put(). Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: rename kobject_init_ng() to kobject_init()Greg Kroah-Hartman
Now that the old kobject_init() function is gone, rename kobject_init_ng() to kobject_init() to clean up the namespace. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: rename kobject_add_ng() to kobject_add()Greg Kroah-Hartman
Now that the old kobject_add() function is gone, rename kobject_add_ng() to kobject_add() to clean up the namespace. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Driver: add driver_add_kobj for looney iseries_veth driverGreg Kroah-Hartman
The iseries driver wants to hang kobjects off of its driver, so, to preserve backwards compatibility, we need to add a call to the driver core to allow future changes to work properly. Hopefully no one uses this function in the future and the iseries_veth driver authors come to their senses so I can remove this hack... Cc: Dave Larson <larson1@us.ibm.com> Cc: Santiago Leon <santil@us.ibm.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: convert drivers/net/iseries_veth.c to use kobject_init/add_ng()Greg Kroah-Hartman
This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Kyle A. Lucke <klucke@us.ibm.com> Cc: David Gibson <dwg@au1.ibm.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: change drivers/net/ibmveth.c to use kobject_init_and_addGreg Kroah-Hartman
Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Dave Larson <larson1@us.ibm.com> Cc: Santiago Leon <santil@us.ibm.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24cosa: Convert from class_device to device for cosa sync driverTony Jones
struct class_device is going away, this converts the code to use struct device instead. Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Jan "Yenya" Kasprzak <kas@fi.muni.cz> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23sis190: scheduling while atomic errorFrancois Romieu
sis190_tx_timeout -> sis190_hw_start -> sis190_soft_reset -> msleep *splat* PCI transactions are correctly flushed here. The msleep() is probably useless. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: K.M. Liu <kmliu@sis.com.tw>
2008-01-23sis190: mdio operation failure is not correctly detectedFrancois Romieu
i ranges from 0 to 100 in the 'for' loop a few lines above. Reported by davem. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: K.M. Liu <kmliu@sis.com.tw>
2008-01-23sis190: remove duplicate INIT_WORKFrancois Romieu
It is already done in sis190_init_one. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: K.M. Liu <kmliu@sis.com.tw>
2008-01-23sis190: add cmos ram access code for the SiS19x/968 chipset pairFrancois Romieu
More work is needed to handle correctly the PHY of the new devices when connected to a 10Mb link but this change already helps some users as is. Fix for: http://bugzilla.kernel.org/show_bug.cgi?id=9467 Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: K.M. Liu <kmliu@sis.com.tw> Cc: J. Gleacher <jgleacher@yahoo.com> Cc: Alexandre Penasso Teixeira <alexandre@keepsoftware.com> Cc: Arliton Rocha <arliton@gmail.com> Cc: Juan Jose Pablos <juanjo@apertus.es> Cc: Wipat Srutiprom <wipat.s@psu.ac.th>
2008-01-23iwlwifi: fix possible read attempt on ucode that is not availableReinette Chatre
This fixes a NULL pointer dereference that can occur when the ucode is not loaded at the time __iwl_up is called. The problem was reported at http://kerneloops.org/raw.php?rawid=2765&msgid= Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-23[TULIP] DMFE: Fix SROM parsing regression.David S. Miller
Changeset 16b110c3fd760620b4a787db6ed512fe531ab1b5 (dmfe warning fix) bothed up the offsets read from the SROM so that it doesn't read the same datums it used to. The change made transformations like turning: "srom + 34" into "(__le32 *)srom + 34/4" which doesn't work because 4 does not divide evenly into 34 so we're using a different pointer offset than in the original code. I've changed theses cases in dmfe_parse_srom() to consistently use "(type *)(srom + offset)" preserving the offsets from the original code. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-22Fix file references in documentation and KconfigJohann Felix Soden
Fix typo in arch/powerpc/boot/flatdevtree_env.h. There is no Documentation/networking/ixgbe.txt. README.cycladesZ is now in Documentation/. wavelan.p.h is now in drivers/net/wireless/. HFS.txt is now Documentation/filesystems/hfs.txt. OSS-files are now in sound/oss/. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [ICMP]: ICMP_MIB_OUTMSGS increment duplicated [IPV6]: RFC 2011 compatibility broken [IPV6]: ICMP6_MIB_OUTMSGS increment duplicated [NET]: rtnl_link: fix use-after-free [AF_KEY]: Fix skb leak on pfkey_send_migrate() error [ATM] atm/suni.c: Fix section mismatch. [ATM] atm/idt77105.c: Fix section mismatch. [IrDA]: af_irda memory leak fixes [NEIGH]: Revert 'Fix race between neigh_parms_release and neightbl_fill_parms' [NETFILTER]: bridge-netfilter: fix net_device refcnt leaks [IPV6] ROUTE: Make sending algorithm more friendly with RFC 4861. [IPV4] FIB_HASH : Avoid unecessary loop in fn_hash_dump_zone() [NET]: Fix interrupt semaphore corruption in Intel drivers. [IPV4] fib_trie: fix duplicated route issue [IPV4] fib_hash: fix duplicated route issue [IPV6]: Mischecked tw match in __inet6_check_established. rfkill: call rfkill_led_trigger_unregister() on error
2008-01-22tc35815: Use irq number for tc35815-mac platform device idAtsushi Nemoto
The tc35815-mac platform device used a pci bus number and a devfn to identify its target device, but the pci bus number may vary if some bus-bridges are found. Use irq number which is be unique for embedded controllers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-20[NET]: rtnl_link: fix use-after-freePatrick McHardy
When unregistering the rtnl_link_ops, all existing devices using the ops are destroyed. With nested devices this may lead to a use-after-free despite the use of for_each_netdev_safe() in case the upper device is next in the device list and is destroyed by the NETDEV_UNREGISTER notifier. The easy fix is to restart scanning the device list after removing a device. Alternatively we could add new devices to the front of the list to avoid having dependant devices follow the device they depend on. A third option would be to only restart scanning if dev->iflink of the next device matches dev->ifindex of the current one. For now this seems like the safest solution. With this patch, the veth rtnl_link_ops unregistration can use rtnl_link_unregister() directly since it now also handles destruction of multiple devices at once. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[NET]: Fix interrupt semaphore corruption in Intel drivers.David S. Miller
Several of the Intel ethernet drivers keep an atomic counter used to manage when to actually hit the hardware with a disable or an enable. The way the net_rx_work() breakout logic works during a pending napi_disable() is that it simply unschedules the poll even if it still has work. This can potentially leave interrupts disabled, but that is OK because all of the drivers are about to disable interrupts anyways in all such code paths that do a napi_disable(). Unfortunately, this trips up the semaphore used here in the Intel drivers. If you hit this case, when you try to bring the interface back up it won't enable interrupts. A reload of the driver module fixes it of course. So what we do is make sure all the sequences now go: napi_disable(); atomic_set(&adapter->irq_sem, 0); *_irq_disable(); which makes sure the counter is always in the correct state. Reported by Robert Olsson. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-18Replace cpmac fixMatteo Croce
Please apply this patch since i reverted by mistake the commit 4e3ab47a547616e583c7a5458beced6aa34c8ef3 in 6cd043d99dcf5d252fcc682958541f449113f7b3 Signed-off-by: Matteo Croce <technoboy85@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18dl2k: the restAl Viro
remove an unused union-with-bitfield of the same sort, add missing conversions in debugging printk Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18dl2k: MSCR, MSSR, ESR, PHY_SCR fixesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18dl2k: BMSR fixesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18dl2k: ANAR, ANLPAR fixesAl Viro
same story, different registers... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18dl2k: BMCR_t fixesAl Viro
broken use of bitfields; FUBAR on big-endian (and not valid C, strictly speaking). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-183c574, 3c515 bitfields abuseAl Viro
wn3_config is shared by these cards; the way we deal with it is both bad C (union abuse) and broken on big-endian. For 3c515 it's less serious (ISA cards are quite rare outside of little-endian boxen), but 3c574 is a pcmcia one and that'd better be endian-independent... Fix is the same in both cases. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18sbni endian fixesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18wan/lmc bitfields fixesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18dscc4 endian fixesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18S2io: Fixed synchronization between scheduling of napi with card reset and closeSreenivasa Honnur
- Fixed synchronization between scheduling of napi with card reset and close by moving the enabling and disabling of napi to card up and card down functions respectively instead of open and close. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18atl1: fix frame length bugJay Cliburn
The driver sets up the hardware to accept a frame with max length equal to MTU + Ethernet header + FCS + VLAN tag, but we neglect to add the VLAN tag size to the ingress buffer. When a VLAN-tagged frame arrives, the hardware passes it, but bad things happen because the buffer is too small. This patch fixes that. Thanks to David Harris for reporting the bug and testing the fix. Tested-by: David Harris <david.harris@cpni-inc.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18Revert "sky2: remove check for PCI wakeup setting from BIOS"Stephen Hemminger
This reverts commit 84cd2dfb04d23a961c5f537baa243fa54d0987ac. Some BIOS's break if Wake On Lan is enabled, and the machine can't boot. Better to have some user's have to call ethtool to enable WOL than to break a single user's boot. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2008-01-18e1000e Kconfig: remove ref to nonexistant docsJason Uhlenkott
There is no Documentation/networking/e1000e.txt. Signed-off-by: Jason Uhlenkott <jasonuhl@jasonuhl.org> Cc: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18Merge branch 'ipg-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into upstream-fixes
2008-01-18bonding: Don't hold lock when calling rtnl_unlockJay Vosburgh
Change bond_mii_monitor to not hold any locks when calling rtnl_unlock, as rtnl_unlock can sleep (when acquring another mutex in netdev_run_todo). Bug reported by Makito SHIOKAWA <mshiokawa@miraclelinux.com>, who included a different patch. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18bonding: fix lock ordering for rtnl and bonding_rwsemJay Vosburgh
Fix the handling of rtnl and the bonding_rwsem to always be acquired in a consistent order (rtnl, then bonding_rwsem). The existing code sometimes acquired them in this order, and sometimes in the opposite order, which opens a window for deadlock between ifenslave and sysfs. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18bonding: Fix up parameter parsingJay Vosburgh
A recent change to add an additional hash policy modified bond_parse_parm, but it now does not correctly match parameters passed in via sysfs. Rewrote bond_parse_parm to handle (a) parameter matches that are substrings of one another and (b) user input with whitespace (e.g., sysfs input often has a trailing newline). Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18bonding: release slaves when master removed via sysfsJay Vosburgh
Add a call to bond_release_all in the bonding netdev event handler for the master. This releases the slaves for the case of, e.g., "echo -bond0 > /sys/class/net/bonding_masters", which otherwise will spin forever waiting for references to be released. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>