summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-12-25igb: check memory allocation failureChristophe JAILLET
[ Upstream commit 18eb86362a52f0af933cc0fd5e37027317eb2d1c ] Check memory allocation failures and return -ENOMEM in such cases, as already done for other memory allocations in this function. This avoids NULL pointers dereference. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Acked-by: PJ Waskiewicz <peter.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25net: phy: at803x: Change error to EINVAL for invalid MACDan Murphy
[ Upstream commit fc7556877d1748ac00958822a0a3bba1d4bd9e0d ] Change the return error code to EINVAL if the MAC address is not valid in the set_wol function. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25bnxt_en: Fix NULL pointer dereference in reopen failure pathSankar Patchineelam
[ Upstream commit 2247925f0942dc4e7c09b1cde45ca18461d94c5f ] Net device reset can fail when the h/w or f/w is in a bad state. Subsequent netdevice open fails in bnxt_hwrm_stat_ctx_alloc(). The cleanup invokes bnxt_hwrm_resource_free() which inturn calls bnxt_disable_int(). In this routine, the code segment if (ring->fw_ring_id != INVALID_HW_RING_ID) BNXT_CP_DB(cpr->cp_doorbell, cpr->cp_raw_cons); results in NULL pointer dereference as cpr->cp_doorbell is not yet initialized, and fw_ring_id is zero. The fix is to initialize cpr fw_ring_id to INVALID_HW_RING_ID before bnxt_init_chip() is invoked. Signed-off-by: Sankar Patchineelam <sankar.patchineelam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25net: moxa: fix TX overrun memory leakJonas Jensen
[ Upstream commit c2b341a620018d4eaeb0e85c16274ac4e5f153d4 ] moxart_mac_start_xmit() doesn't care where tx_tail is, tx_head can catch and pass tx_tail, which is bad because moxart_tx_finished() isn't guaranteed to catch up on freeing resources from tx_tail. Add a check in moxart_mac_start_xmit() stopping the queue at the end of the circular buffer. Also add a check in moxart_tx_finished() waking the queue if the buffer has TX_WAKE_THRESHOLD or more free descriptors. While we're at it, move spin_lock_irq() to happen before our descriptor pointer is assigned in moxart_mac_start_xmit(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=99451 Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25irda: vlsi_ir: fix check for DMA mapping errorsAlexey Khoroshilov
[ Upstream commit 6ac3b77a6ffff7513ff86b684aa256ea01c0e5b5 ] vlsi_alloc_ring() checks for DMA mapping errors by comparing returned address with zero, while pci_dma_mapping_error() should be used. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25i40e: Do not enable NAPI on q_vectors that have no ringsAlexander Duyck
[ Upstream commit 13a8cd191a2b470cfd435b3b57dbd21aa65ff78c ] When testing the epoll w/ busy poll code I found that I could get into a state where the i40e driver had q_vectors w/ active NAPI that had no rings. This was resulting in a divide by zero error. To correct it I am updating the driver code so that we only support NAPI on q_vectors that have 1 or more rings allocated to them. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25bna: avoid writing uninitialized data into hw registersArnd Bergmann
[ Upstream commit a5af83925363eb85d467933e3d6ec5a87001eb7c ] The latest gcc-7 snapshot warns about bfa_ioc_send_enable/bfa_ioc_send_disable writing undefined values into the hardware registers: drivers/net/ethernet/brocade/bna/bfa_ioc.c: In function 'bfa_iocpf_sm_disabling_entry': arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+4)' is used uninitialized in this function [-Werror=uninitialized] arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+8)' is used uninitialized in this function [-Werror=uninitialized] The two functions look like they should do the same thing, but only one of them initializes the time stamp and clscode field. The fact that we only get a warning for one of the two functions seems to be arbitrary, based on the inlining decisions in the compiler. To address this, I'm making both functions do the same thing: - set the clscode from the ioc structure in both - set the time stamp from ktime_get_real_seconds (which also avoids the signed-integer overflow in 2038 and extends the well-defined behavior until 2106). - zero-fill the reserved field Fixes: 8b230ed8ec96 ("bna: Brocade 10Gb Ethernet device driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25r8152: prevent the driver from transmitting packets with carrier offhayeswang
[ Upstream commit 2f25abe6bac573928a990ccbdac75873add8127e ] The linking status may be changed when autosuspend. And, after autoresume, the driver may try to transmit packets when the device is carrier off, because the interrupt transfer doesn't update the linking status, yet. And, if the device is in ALDPS mode, the device would stop working. The another similar case is 1. unplug the cable. 2. interrupt transfer queue a work_queue for linking change. 3. device enters the ALDPS mode. 4. a tx occurs before the work_queue is called. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25r8152: fix the rx early size of RTL8153hayeswang
[ Upstream commit b20cb60e2b865638459e6ec82ad3536d3734e555 ] revert commit a59e6d815226 ("r8152: correct the rx early size") and fix the rx early size as (rx buffer size - rx packet size - rx desc size - alignment) / 4 Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4Tony Lindgren
[ Upstream commit 4071898bf0f4d79ff353db327af2a15123272548 ] This gets qmicli working with the MDM6600 modem. Cc: Bjørn Mork <bjorn@mork.no> Reviewed-by: Sebastian Reichel <sre@kernel.org> Tested-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25bna: integer overflow bug in debugfsDan Carpenter
[ Upstream commit 13e2d5187f6b965ba3556caedb914baf81b98ed2 ] We could allocate less memory than intended because we do: bnad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. Fixes: 7afc5dbde091 ("bna: Add debugfs interface.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Rasesh Mody <rasesh.mody@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25r8152: fix the list rx_done may be used without initializationhayeswang
[ Upstream commit 98d068ab52b4b11d403995ed14154660797e7136 ] The list rx_done would be initialized when the linking on occurs. Therefore, if a napi is scheduled without any linking on before, the following kernel panic would happen. BUG: unable to handle kernel NULL pointer dereference at 000000000000008 IP: [<ffffffffc085efde>] r8152_poll+0xe1e/0x1210 [r8152] PGD 0 Oops: 0002 [#1] SMP Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20ath9k: fix tx99 potential info leakMiaoqing Pan
[ Upstream commit ee0a47186e2fa9aa1c56cadcea470ca0ba8c8692 ] When the user sets count to zero the string buffer would remain completely uninitialized which causes the kernel to parse its own stack data, potentially leading to an info leak. In addition to that, the string might be not terminated properly when the user data does not contain a 0-terminator. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Reviewed-by: Christoph Böhmwalder <christoph@boehmwalder.at> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20macvlan: Only deliver one copy of the frame to the macvlan interfaceAlexander Duyck
[ Upstream commit dd6b9c2c332b40f142740d1b11fb77c653ff98ea ] This patch intoduces a slight adjustment for macvlan to address the fact that in source mode I was seeing two copies of any packet addressed to the macvlan interface being delivered where there should have been only one. The issue appears to be that one copy was delivered based on the source MAC address and then the second copy was being delivered based on the destination MAC address. To fix it I am just treating a unicast address match as though it is not a match since source based macvlan isn't supposed to be matching based on the destination MAC anyway. Fixes: 79cf79abce71 ("macvlan: add source mode") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20ppp: Destroy the mutex when cleanupGao Feng
[ Upstream commit f02b2320b27c16b644691267ee3b5c110846f49e ] The mutex_destroy only makes sense when enable DEBUG_MUTEX. For the good readbility, it's better to invoke it in exit func when the init func invokes mutex_init. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Acked-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20sfc: don't warn on successful change of MACRobert Stonehouse
[ Upstream commit cbad52e92ad7f01f0be4ca58bde59462dc1afe3a ] Fixes: 535a61777f44e ("sfc: suppress handled MCDI failures when changing the MAC address") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20net/mlx4_core: Avoid delays during VF driver device shutdownJack Morgenstein
[ Upstream commit 4cbe4dac82e423ecc9a0ba46af24a860853259f4 ] Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. For such Hypervisors, there is a race condition between the VF's shutdown method and its internal-error detection/reset thread. The internal-error detection/reset thread (which runs every 5 seconds) also detects a disabled comm channel. If the internal-error detection/reset flow wins the race, we still get delays (while that flow tries repeatedly to detect comm-channel recovery). The cited commit fixed the command timeout problem when the internal-error detection/reset flow loses the race. This commit avoids the unneeded delays when the internal-error detection/reset flow wins. Fixes: d585df1c5ccf ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reported-by: Simon Xiao <sixiao@microsoft.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20iwlwifi: mvm: cleanup pending frames in DQA modeSara Sharon
[ Upstream commit 9a3fcf912ef7f5c6e18f9af6875dd13f7311f7aa ] When a station is asleep, the fw will set it as "asleep". All queues that are used only by one station will be stopped by the fw. In pre-DQA mode this was relevant for aggregation queues. However, in DQA mode a queue is owned by one station only, so all queues will be stopped. As a result, we don't expect to get filtered frames back to mac80211 and don't have to maintain the entire pending_frames state logic, the same way as we do in aggregations. The correct behavior is to align DQA behavior with the aggregation queue behaviour pre-DQA: - Don't count pending frames. - Let mac80211 know we have frames in these queues so that it can properly handle trigger frames. When a trigger frame is received, mac80211 tells the driver to send frames from the queues using release_buffered_frames. The driver will tell the fw to let frames out even if the station is asleep. This is done by iwl_mvm_sta_modify_sleep_tx_count. Reported-and-tested-by: Jens Axboe <axboe@kernel.dk> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20fjes: Fix wrong netdevice feature flagsTaku Izumi
[ Upstream commit fe8daf5fa715f7214952f06a387e4b7de818c5be ] This patch fixes netdev->features for Extended Socket network device. Currently Extended Socket network device's netdev->feature claims NETIF_F_HW_CSUM, however this is completely wrong. There's no feature of checksum offloading. That causes invalid TCP/UDP checksum and packet rejection when IP forwarding from Extended Socket network device to other network device. NETIF_F_HW_CSUM should be omitted. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20qed: Fix interrupt flags on Rx LL2Ram Amrani
[ Upstream commit 1df2adedcce17ad4a39fba74f0e2b611f797fe10 ] Before iterating over the the LL2 Rx ring, the ring's spinlock is taken via spin_lock_irqsave(). The actual processing of the packet [including handling by the protocol driver] is done without said lock, so qed releases the spinlock and re-claims it afterwards. Problem is that the final spin_lock_irqrestore() at the end of the iteration uses the original flags saved from the initial irqsave() instead of the flags from the most recent irqsave(). So it's possible that the interrupt status would be incorrect at the end of the processing. Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support"); CC: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20qed: Fix mapping leak on LL2 rx flowMintz, Yuval
[ Upstream commit 752ecb2da11124a948567076b60767dc8034cfa5 ] When receiving an Rx LL2 packet, qed fails to unmap the previous buffer. Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support"); Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20qed: Align CIDs according to DORQ requirementRam Amrani
[ Upstream commit f3e48119b97f56fb09310c95d49da122a27003d7 ] The Doorbell HW block can be configured at a granularity of 16 x CIDs, so we need to make sure that the actual number of CIDs configured would be a multiplication of 16. Today, when RoCE is enabled - given that the number is unaligned, doorbelling the higher CIDs would fail to reach the firmware and would eventually timeout. Fixes: dbb799c39717 ("qed: Initialize hardware for new protocols") Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20mlxsw: reg: Fix SPVMLR max record countJiri Pirko
[ Upstream commit e9093b1183bbac462d2caef3eac165778c0b1bf1 ] The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans learning not being enabled for wider ranges than 255. Fixes: a4feea74cd7a ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20mlxsw: reg: Fix SPVM max record countJiri Pirko
[ Upstream commit f004ec065b4879d6bc9ba0211af2169b3ce3097f ] The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans not being enabled for wider ranges than 255. Fixes: b2e345f9a454 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20net: wimax/i2400m: fix NULL-deref at probeJohan Hovold
[ Upstream commit 6e526fdff7be4f13b24f929a04c0e9ae6761291e ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. The endpoints are specifically dereferenced in the i2400m_bootrom_init path during probe (e.g. in i2400mu_tx_bulk_out). Fixes: f398e4240fce ("i2400m/USB: probe/disconnect, dev init/shutdown and reset backends") Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20net/mlx5: Don't save PCI state when PCI error is detectedDaniel Jurgens
[ Upstream commit 5d47f6c89d568ab61712d8c40676fbb020b68752 ] When a PCI error is detected the PCI state could be corrupt, don't save it in that flow. Save the state after initialization. After restoring the PCI state during slot reset save it again, restoring the state destroys the previously saved state info. Fixes: 05ac2c0b7438 ('net/mlx5: Fix race between PCI error handlers and health work') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20net/mlx5: Fix create autogroup prev initializerPaul Blakey
[ Upstream commit af36370569eb37420e1e78a2e60c277b781fcd00 ] The autogroups list is a list of non overlapping group boundaries sorted by their start index. If the autogroups list wasn't empty and an empty group slot was found at the start of the list, the new group was added to the end of the list instead of the beginning, as the prev initializer was incorrect. When this was repeated, it caused multiple groups to have overlapping boundaries. Fixed that by correctly initializing the prev pointer to the start of the list. Fixes: eccec8da3b4e ('net/mlx5: Keep autogroups list ordered') Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20net: bcmgenet: Power up the internal PHY before probing the MIIDoug Berger
[ Upstream commit 6be371b053dc86f11465cc1abce2e99bda0a0574 ] When using the internal PHY it must be powered up when the MII is probed or the PHY will not be detected. Since the PHY is powered up at reset this has not been a problem. However, when the kernel is restarted with kexec the PHY will likely be powered down when the kernel starts so it will not be detected and the Ethernet link will not be established. This commit explicitly powers up the internal PHY when the GENET driver is probed to correct this behavior. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20net: bcmgenet: synchronize irq0 status between the isr and taskDoug Berger
[ Upstream commit 07c52d6a0b955a8a28834f9354793cfc4b81d0e9 ] Add a spinlock to ensure that irq0_stat is not unintentionally altered as the result of preemption. Also removed unserviced irq0 interrupts and removed irq1_stat since there is no bottom half service for those interrupts. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20net: bcmgenet: power down internal phy if open or resume failsDoug Berger
[ Upstream commit 7627409cc4970e8c8b9de6945ad86a575290a94e ] Since the internal PHY is powered up during the open and resume functions it should be powered back down if the functions fail. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20net: bcmgenet: reserved phy revisions must be checked firstDoug Berger
[ Upstream commit eca4bad73409aedc6ff22f823c18b67a4f08c851 ] The reserved gphy_rev value of 0x01ff must be tested before the old or new scheme for GPHY major versioning are tested, otherwise it will be treated as 0xff00 according to the old scheme. Fixes: b04a2f5b9ff5 ("net: bcmgenet: add support for new GENET PHY revision scheme") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20net: bcmgenet: correct MIB access of UniMAC RUNT countersDoug Berger
[ Upstream commit 1ad3d225e5a40ca6c586989b4baaca710544c15a ] The gap between the Tx status counters and the Rx RUNT counters is now being added to allow correct reporting of the registers. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB valuesDoug Berger
[ Upstream commit ffff71328a3c321f7c14cc1edd33577717037744 ] The location of the RBUF overflow and error counters has moved between different version of the GENET MAC. This commit corrects the driver to read from the correct locations depending on the version of the GENET MAC. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20bnxt_en: Ignore 0 value in autoneg supported speed from firmware.Michael Chan
[ Upstream commit 520ad89a54edea84496695d528f73ddcf4a52ea4 ] In some situations, the firmware will return 0 for autoneg supported speed. This may happen if the firmware detects no SFP module, for example. The driver should ignore this so that we don't end up with an invalid autoneg setting with nothing advertised. When SFP module is inserted, we'll get the updated settings from firmware at that time. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16ipvlan: fix ipv6 outbound deviceKeefe Liu
[ Upstream commit ca29fd7cce5a6444d57fb86517589a1a31c759e1 ] When process the outbound packet of ipv6, we should assign the master device to output device other than input device. Signed-off-by: Keefe Liu <liuqifa@huawei.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16stmmac: reset last TSO segment size after device openLars Persson
[ Upstream commit 45ab4b13e46325d00f4acdb365d406e941a15f81 ] The mss variable tracks the last max segment size sent to the TSO engine. We do not update the hardware as long as we receive skb:s with the same value in gso_size. During a network device down/up cycle (mapped to stmmac_release() and stmmac_open() callbacks) we issue a reset to the hardware and it forgets the setting for mss. However we did not zero out our mss variable so the next transmission of a gso packet happens with an undefined hardware setting. This triggers a hang in the TSO engine and eventuelly the netdev watchdog will bark. Fixes: f748be531d70 ("stmmac: support new GMAC4") Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16usbnet: fix alignment for frames with no ethernet headerBjørn Mork
[ Upstream commit a4abd7a80addb4a9547f7dfc7812566b60ec505c ] The qmi_wwan minidriver support a 'raw-ip' mode where frames are received without any ethernet header. This causes alignment issues because the skbs allocated by usbnet are "IP aligned". Fix by allowing minidrivers to disable the additional alignment offset. This is implemented using a per-device flag, since the same minidriver also supports 'ethernet' mode. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Reported-and-tested-by: Jay Foster <jay@systech.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16net: qmi_wwan: add Quectel BG96 2c7c:0296Sebastian Sjoholm
[ Upstream commit f9409e7f086fa6c4623769b4b2f4f17a024d8143 ] Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development board (EVB). The USB id is added to qmi_wwan.c to allow QMI communication with the BG96. Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()Ben Hutchings
[ Upstream commit 67bd52386125ce1159c0581cbcd2740addf33cd4 ] hwsim_new_radio_nl() now copies the name attribute in order to add a null-terminator. mac80211_hwsim_new_radio() (indirectly) copies it again into the net_device structure, so the first copy is not used or freed later. Free the first copy before returning. Fixes: ff4dd73dd2b4 ("mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14ibmvnic: Allocate number of rx/tx buffers agreed on by firmwareThomas Falcon
[ Upstream commit 068d9f90a6978c3e3a662d9e85204a7d6be240d2 ] The amount of TX/RX buffers that the vNIC driver currently allocates is different from the amount agreed upon in negotiation with firmware. Correct that by allocating the requested number of buffers confirmed by firmware. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14ibmvnic: Fix overflowing firmware/hardware TX queueThomas Falcon
[ Upstream commit 142c0ac445792c492579cb01f1cfd4e32e6dfcce ] Use a counter to track the number of outstanding transmissions sent that have not received completions. If the counter reaches the maximum number of queue entries, stop transmissions on that queue. As we receive more completions from firmware, wake the queue once the counter reaches an acceptable level. This patch prevents hardware/firmware TX queue from filling up and and generating errors. Since incorporating this fix, internal testing has reported that these firmware errors have stopped. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14bnx2x: do not rollback VF MAC/VLAN filters we did not configureMichal Schmidt
[ Upstream commit 78d5505432436516456c12abbe705ec8dee7ee2b ] On failure to configure a VF MAC/VLAN filter we should not attempt to rollback filters that we failed to configure with -EEXIST. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14bnx2x: fix detection of VLAN filtering feature for VFMichal Schmidt
[ Upstream commit 83bd9eb8fc69cdd5135ed6e1f066adc8841800fd ] VFs are currently missing the VLAN filtering feature, because we were checking the PF's acquire response before actually performing the acquire. Fix it by setting the feature flag later when we have the PF response. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14bnx2x: fix possible overrun of VFPF multicast addresses arrayMichal Schmidt
[ Upstream commit 22118d861cec5da6ed525aaf12a3de9bfeffc58f ] It is too late to check for the limit of the number of VF multicast addresses after they have already been copied to the req->multicast[] array, possibly overflowing it. Do the check before copying. Also fix the error path to not skip unlocking vf2pf_mutex. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14bnx2x: prevent crash when accessing PTP with interface downMichal Schmidt
[ Upstream commit 466e8bf10ac104d96e1ea813e8126e11cb72ea20 ] It is possible to crash the kernel by accessing a PTP device while its associated bnx2x interface is down. Before the interface is brought up, the timecounter is not initialized, so accessing it results in NULL dereference. Fix it by checking if the interface is up. Use -ENETDOWN as the error code when the interface is down. -EFAULT in bnx2x_ptp_adjfreq() did not seem right. Tested using phc_ctl get/set/adj/freq commands. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14spi_ks8995: regs_size incorrect for some devicesBlomme, Maarten
[ Upstream commit 239870f2a0ebf75cc8f6d987dc528c5243f93d69 ] Signed-off-by: Maarten Blomme <Maarten.Blomme@flir.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14spi_ks8995: fix "BUG: key accdaa28 not in .data!"Blomme, Maarten
[ Upstream commit 4342696df764ec65dcdfbd0c10d90ea52505f8ba ] Signed-off-by: Maarten Blomme <Maarten.Blomme@flir.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14brcmfmac: change driver unbind order of the sdio function devicesArend Van Spriel
commit 5c3de777bdaf48bd0cfb43097c0d0fb85056cab7 upstream. In the function brcmf_sdio_firmware_callback() the driver is unbound from the sdio function devices in the error path. However, the order in which it is done resulted in a use-after-free issue (see brcmf_ops_sdio_remove() in bcmsdh.c). Hence change the order and first unbind sdio function #2 device and then unbind sdio function #1 device. Fixes: 7a51461fc2da ("brcmfmac: unbind all devices upon failure in firmware callback") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14can: usb_8dev: cancel urb on -EPIPE and -EPROTOMartin Kelly
commit 12147edc434c9e4c7c2f5fee2e5519b2e5ac34ce upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14can: esd_usb2: cancel urb on -EPIPE and -EPROTOMartin Kelly
commit 7a31ced3de06e9878e4f9c3abe8f87d9344d8144 upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-06 00:51:25 +0000