summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2015-09-25Merge tag 'pci-v4.3-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for things we merged for v4.3 (VPD, MSI, and bridge window management), and a new Renesas R8A7794 SoC device ID. Details: Resource management: - Revert pci_read_bridge_bases() unification (Bjorn Helgaas) - Clear IORESOURCE_UNSET when clipping a bridge window (Bjorn Helgaas) MSI: - Fix MSI IRQ domains for VFs on virtual buses (Alex Williamson) Renesas R-Car host bridge driver: - Add R8A7794 support (Sergei Shtylyov) Miscellaneous: - Fix devfn for VPD access through function 0 (Alex Williamson) - Use function 0 VPD only for identical functions (Alex Williamson)" * tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: rcar: Add R8A7794 support PCI: Use function 0 VPD for identical functions, regular VPD for others PCI: Fix devfn for VPD access through function 0 PCI/MSI: Fix MSI IRQ domains for VFs on virtual buses PCI: Clear IORESOURCE_UNSET when clipping a bridge window PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"
2015-09-24PCI: rcar: Add R8A7794 supportSergei Shtylyov
Add Renesas R8A7794 SoC support to the Renesas R-Car gen2 PCI driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-24PCI: Use function 0 VPD for identical functions, regular VPD for othersAlex Williamson
932c435caba8 ("PCI: Add dev_flags bit to access VPD through function 0") added PCI_DEV_FLAGS_VPD_REF_F0. Previously, we set the flag on every non-zero function of quirked devices. If a function turned out to be different from function 0, i.e., it had a different class, vendor ID, or device ID, the flag remained set but we didn't make VPD accessible at all. Flip this around so we only set PCI_DEV_FLAGS_VPD_REF_F0 for functions that are identical to function 0, and allow regular VPD access for any other functions. [bhelgaas: changelog, stable tag] Fixes: 932c435caba8 ("PCI: Add dev_flags bit to access VPD through function 0") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Myron Stowe <myron.stowe@redhat.com> Acked-by: Mark Rustad <mark.d.rustad@intel.com> CC: stable@vger.kernel.org
2015-09-24PCI: Fix devfn for VPD access through function 0Alex Williamson
Commit 932c435caba8 ("PCI: Add dev_flags bit to access VPD through function 0") passes PCI_SLOT(devfn) for the devfn parameter of pci_get_slot(). Generally this works because we're fairly well guaranteed that a PCIe device is at slot address 0, but for the general case, including conventional PCI, it's incorrect. We need to get the slot and then convert it back into a devfn. Fixes: 932c435caba8 ("PCI: Add dev_flags bit to access VPD through function 0") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Myron Stowe <myron.stowe@redhat.com> Acked-by: Mark Rustad <mark.d.rustad@intel.com> CC: stable@vger.kernel.org
2015-09-24PCI/MSI: Fix MSI IRQ domains for VFs on virtual busesAlex Williamson
SR-IOV creates a virtual bus where bus->self is NULL. When we add VFs and scan for an MSI domain, pci_set_bus_msi_domain() dereferences bus->self, which causes a kernel NULL pointer dereference oops. Scan up to the parent bus until we find a real bridge where we can get the MSI domain. [bhelgaas: changelog] Fixes: 44aa0c657e3e ("PCI/MSI: Add hooks to populate the msi_domain field") Tested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-22PCI: Clear IORESOURCE_UNSET when clipping a bridge windowBjorn Helgaas
c770cb4cb505 ("PCI: Mark invalid BARs as unassigned") sets IORESOURCE_UNSET if we fail to claim a resource. If we tried to claim a bridge window, failed, clipped the window, and tried to claim the clipped window, we failed again because of IORESOURCE_UNSET: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci 0000:00:01.0: can't claim BAR 15 [mem 0xbdf00000-0xddefffff 64bit pref]: no compatible bridge window pci 0000:00:01.0: [mem size 0x20000000 64bit pref] clipped to [mem size 0x1df00000 64bit pref] pci 0000:00:01.0: bridge window [mem size 0x1df00000 64bit pref] pci 0000:00:01.0: can't claim BAR 15 [mem size 0x1df00000 64bit pref]: no address assigned The 00:01.0 window started as [mem 0xbdf00000-0xddefffff 64bit pref]. That starts before the host bridge window [mem 0xc0000000-0xffffffff window], so we clipped the 00:01.0 window to [mem 0xc0000000-0xddefffff 64bit pref]. But we left it marked IORESOURCE_UNSET, so the second claim failed when it should have succeeded. This means downstream devices will also fail for lack of resources, e.g., in the bugzilla below, radeon 0000:01:00.0: Fatal error during GPU init Clear IORESOURCE_UNSET when we clip a bridge window. Also clear IORESOURCE_UNSET in our copy of the unclipped window so we can see exactly what the original window was and how it now fits inside the upstream window. Fixes: c770cb4cb505 ("PCI: Mark invalid BARs as unassigned") Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491#c47 Based-on-patch-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Based-on-patch-by: Yinghai Lu <yinghai@kernel.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v4.1+
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-15PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"Bjorn Helgaas
Revert dff22d2054b5 ("PCI: Call pci_read_bridge_bases() from core instead of arch code"). Reading PCI bridge windows is not arch-specific in itself, but there is PCI core code that doesn't work correctly if we read them too early. For example, Hannes found this case on an ARM Freescale i.mx6 board: pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: BAR 8: no space for [mem size 0x01000000] (mem window) pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00200000] pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x00004000] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00000100] The 00:00.0 mem window needs to be at least 3MB: the 01:00.0 device needs 0x204100 of space, and mem windows are megabyte-aligned. Bus sizing can increase a bridge window size, but never *decrease* it (see d65245c3297a ("PCI: don't shrink bridge resources")). Prior to dff22d2054b5, ARM didn't read bridge windows at all, so the "original size" was zero, and we assigned a 3MB window. After dff22d2054b5, we read the bridge windows before sizing the bus. The firmware programmed a 16MB window (size 0x01000000) in 00:00.0, and since we never decrease the size, we kept 16MB even though we only needed 3MB. But 16MB doesn't fit in the host bridge aperture, so we failed to assign space for the window and the downstream devices. I think this is a defect in the PCI core: we shouldn't rely on the firmware to assign sensible windows. Ray reported a similar problem, also on ARM, with Broadcom iProc. Issues like this are too hard to fix right now, so revert dff22d2054b5. Reported-by: Hannes <oe5hpm@gmail.com> Reported-by: Ray Jui <rjui@broadcom.com> Link: http://lkml.kernel.org/r/CAAa04yFQEUJm7Jj1qMT57-LG7ZGtnhNDBe=PpSRa70Mj+XhW-A@mail.gmail.com Link: http://lkml.kernel.org/r/55F75BB8.4070405@broadcom.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-09-10kexec: split kexec_load syscall from kexec core codeDave Young
There are two kexec load syscalls, kexec_load another and kexec_file_load. kexec_file_load has been splited as kernel/kexec_file.c. In this patch I split kexec_load syscall code to kernel/kexec.c. And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and use kexec_file_load only, or vice verse. The original requirement is from Ted Ts'o, he want kexec kernel signature being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use kexec_load syscall can bypass the checking. Vivek Goyal proposed to create a common kconfig option so user can compile in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects KEXEC_CORE so that old config files still work. Because there's general code need CONFIG_KEXEC_CORE, so I updated all the architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects KEXEC_CORE in arch Kconfig. Also updated general kernel code with to kexec_load syscall. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dave Young <dyoung@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08Merge branch 'parisc-4.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "The most important changes in this patchset are: - re-enable 64bit PCI bus addresses which were temporarily disabled for PA-RISC in kernel 4.2 - fix the 64bit CAS operation in the LWS path which now enables us to enable the 64bit gcc atomic builtins even on 32bit userspace with 64bit kernel - fix a long-standing bug which sometimes crashed kernel at bootup while serial interrupt wasn't registered yet" * 'parisc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Use platform_device_register_simple("rtc-generic") parisc: Drop CONFIG_SMP around update_cr16_clocksource() parisc: Use double word condition in 64bit CAS operation parisc: Filter out spurious interrupts in PA-RISC irq handler parisc: Additionally check for in_atomic() in page fault handler PCI,parisc: Enable 64-bit bus addresses on PA-RISC parisc: Define ioremap_uc and ioremap_wc
2015-09-08Merge tag 'libnvdimm-for-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This update has successfully completed a 0day-kbuild run and has appeared in a linux-next release. The changes outside of the typical drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and the introduction of ZONE_DEVICE + devm_memremap_pages(). Summary: - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic mechanism for adding device-driver-discovered memory regions to the kernel's direct map. This facility is used by the pmem driver to enable pfn_to_page() operations on the page frames returned by DAX ('direct_access' in 'struct block_device_operations'). For now, the 'memmap' allocation for these "device" pages comes from "System RAM". Support for allocating the memmap from device memory will arrive in a later kernel. - Introduce memremap() to replace usages of ioremap_cache() and ioremap_wt(). memremap() drops the __iomem annotation for these mappings to memory that do not have i/o side effects. The replacement of ioremap_cache() with memremap() is limited to the pmem driver to ease merging the api change in v4.3. Completion of the conversion is targeted for v4.4. - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem driver, update the VFS DAX implementation and PMEM api to provide persistence guarantees for kernel operations on a DAX mapping. - Convert the ACPI NFIT 'BLK' driver to map the block apertures as cacheable to improve performance. - Miscellaneous updates and fixes to libnvdimm including support for issuing "address range scrub" commands, clarifying the optimal 'sector size' of pmem devices, a clarification of the usage of the ACPI '_STA' (status) property for DIMM devices, and other minor fixes" * tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits) libnvdimm, pmem: direct map legacy pmem by default libnvdimm, pmem: 'struct page' for pmem libnvdimm, pfn: 'struct page' provider infrastructure x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB add devm_memremap_pages mm: ZONE_DEVICE for "device memory" mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h dax: drop size parameter to ->direct_access() nd_blk: change aperture mapping from WC to WB nvdimm: change to use generic kvfree() pmem, dax: have direct_access use __pmem annotation dax: update I/O path to do proper PMEM flushing pmem: add copy_from_iter_pmem() and clear_pmem() pmem, x86: clean up conditional pmem includes pmem: remove layer when calling arch_has_wmb_pmem() pmem, x86: move x86 PMEM API to new pmem.h header libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option pmem: switch to devm_ allocations devres: add devm_memremap libnvdimm, btt: write and validate parent_uuid ...
2015-09-08PCI,parisc: Enable 64-bit bus addresses on PA-RISCHelge Deller
Commit 3a9ad0b ("PCI: Add pci_bus_addr_t") unconditionally introduced usage of 64-bit PCI bus addresses on all 64-bit platforms which broke PA-RISC. It turned out that due to enabling the 64-bit addresses, the PCI logic decided to use the GMMIO instead of the LMMIO region. This commit simply disables registering the GMMIO and thus we fall back to use the LMMIO region as before. Reverts commit 45ea2a5fed6dacb9bb0558d8b21eacc1c45d5bb4 ("PCI: Don't use 64-bit bus addresses on PA-RISC") To: linux-parisc@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Meelis Roos <mroos@linux.ee> Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Helge Deller <deller@gmx.de>
2015-09-01Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
2015-09-01Merge tag 'armsoc-arm64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit changes from Olof Johansson: "Here's our branch of ARM64 contents for this merge window. Most of this is DT contents for new SoCs (or those who have seen new device support added). Maybe we should stop separating out the arm64 contents here to avoid the kind of internal conflicts as we got this time around, where 32- and 64-bit contents conflicted. Anyhow, on the actual contents: New SoCs: - Broadcom North Star 2 (ns2) - Marvell Berlin4CT - Mediatek MT6795 - Rockchip RK3368 In addition, there are enhancements for the following platforms: - Mediatek MT8173: cpuidle-dt updates, misc other additions - ZyncMP: A bunch of devices added to the existing DTSI - Qualcomm MSM8916 and APQ8016 updates for USB, etc. + a handful of other updates for various platforms" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits) ARM64: dts: vexpress: Use assigned-clock-parents for sp810 ARM64: dts: mt6795: enable basic SMP bringup for MT6795 arm64: Enable Marvell Berlin SoC family in defconfig arm64: Enable Marvell Berlin SoC family in Kconfig arm64: dts: Add dts files for Marvell Berlin4CT SoC ARM64: zynqmp: Move SPI nodes to the right location ARM64: zynqmp: Move uart and ttcs to the right location ARM64: zynqmp: Enable spi flashes on ep108 ARM64: zynqmp: Add eeprom memories on i2c bus ARM64: zynqmp: Enable sdhci on ep108 ARM64: zynqmp: Enable watchdog on ep108 ARM64: zynqmp: Add DWC3 usb support ARM64: zynqmp: Add SMMU support ARM64: zynqmp: Add CANs node for platform ARM64: zynqmp: Use zynqmp specific compatible string for gpio devicetree: xilinx: zynqmp: add sata node PCI: iproc: Fix BCMA dependency in Kconfig arm64: dts: Add Broadcom North Star 2 support arm64: Add Broadcom iProc family support PCI: iproc: Fix ARM64 dependency in Kconfig ...
2015-09-01Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: "The dominant change in this cycle was the continued work to isolate kernel drivers from MTRR legacies: this tree gets rid of all kernel internal driver interfaces to MTRRs (mostly by rewriting it to proper PAT interfaces), the only access left is the /proc/mtrr ABI. This work was done by Luis R Rodriguez. There's also some related PCI interface additions for which I've Cc:-ed Bjorn" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/mm/mtrr: Remove kernel internal MTRR interfaces: unexport mtrr_add() and mtrr_del() s390/io: Add pci_iomap_wc() and pci_iomap_wc_range() drivers/dma/iop-adma: Use dma_alloc_writecombine() kernel-style drivers/video/fbdev/vt8623fb: Use arch_phys_wc_add() and pci_iomap_wc() drivers/video/fbdev/s3fb: Use arch_phys_wc_add() and pci_iomap_wc() drivers/video/fbdev/arkfb.c: Use arch_phys_wc_add() and pci_iomap_wc() PCI: Add pci_iomap_wc() variants drivers/video/fbdev/gxt4500: Use pci_ioremap_wc_bar() to map framebuffer drivers/video/fbdev/kyrofb: Use arch_phys_wc_add() and pci_ioremap_wc_bar() drivers/video/fbdev/i740fb: Use arch_phys_wc_add() and pci_ioremap_wc_bar() PCI: Add pci_ioremap_wc_bar() x86/mm: Make kernel/check.c explicitly non-modular x86/mm/pat: Make mm/pageattr[-test].c explicitly non-modular x86/mm/pat: Add comments to cachemode translation tables arch/*/io.h: Add ioremap_uc() to all architectures drivers/video/fbdev/atyfb: Use arch_phys_wc_add() and ioremap_wc() drivers/video/fbdev/atyfb: Replace MTRR UC hole with strong UC drivers/video/fbdev/atyfb: Clarify ioremap() base and length used drivers/video/fbdev/atyfb: Carve out framebuffer length fudging into a helper x86/mm, asm-generic: Add IOMMU ioremap_uc() variant default ...
2015-08-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.3: API: - the AEAD interface transition is now complete. - add top-level skcipher interface. Drivers: - x86-64 acceleration for chacha20/poly1305. - add sunxi-ss Allwinner Security System crypto accelerator. - add RSA algorithm to qat driver. - add SRIOV support to qat driver. - add LS1021A support to caam. - add i.MX6 support to caam" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (163 commits) crypto: algif_aead - fix for multiple operations on AF_ALG sockets crypto: qat - enable legacy VFs MPI: Fix mpi_read_buffer crypto: qat - silence a static checker warning crypto: vmx - Fixing opcode issue crypto: caam - Use the preferred style for memory allocations crypto: caam - Propagate the real error code in caam_probe crypto: caam - Fix the error handling in caam_probe crypto: caam - fix writing to JQCR_MS when using service interface crypto: hash - Add AHASH_REQUEST_ON_STACK crypto: testmgr - Use new skcipher interface crypto: skcipher - Add top-level skcipher interface crypto: cmac - allow usage in FIPS mode crypto: sahara - Use dmam_alloc_coherent crypto: caam - Add support for LS1021A crypto: qat - Don't move data inside output buffer crypto: vmx - Fixing GHASH Key issue on little endian crypto: vmx - Fixing AES-CTR counter bug crypto: null - Add missing Kconfig tristate for NULL2 crypto: nx - Add forward declaration for struct crypto_aead ...
2015-08-31Merge tag 'pci-v4.3-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.3 merge window: Enumeration: - Allocate ATS struct during enumeration (Bjorn Helgaas) - Embed ATS info directly into struct pci_dev (Bjorn Helgaas) - Reduce size of ATS structure elements (Bjorn Helgaas) - Stop caching ATS Invalidate Queue Depth (Bjorn Helgaas) - iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth (Bjorn Helgaas) - Move MPS configuration check to pci_configure_device() (Bjorn Helgaas) - Set MPS to match upstream bridge (Keith Busch) - ARM/PCI: Set MPS before pci_bus_add_devices() (Murali Karicheri) - Add pci_scan_root_bus_msi() (Lorenzo Pieralisi) - ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() (Lorenzo Pieralisi) Resource management: - Call pci_read_bridge_bases() from core instead of arch code (Lorenzo Pieralisi) PCI device hotplug: - pciehp: Remove unused interrupt events (Bjorn Helgaas) - pciehp: Remove ignored MRL sensor interrupt events (Bjorn Helgaas) - pciehp: Handle invalid data when reading from non-existent devices (Jarod Wilson) - pciehp: Simplify pcie_poll_cmd() (Yijing Wang) - Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot (Yijing Wang) - Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem (Yijing Wang) - Hold pci_slot_mutex while searching bus->slots list (Yijing Wang) Power management: - Disable async suspend/resume for JMicron multi-function SATA/AHCI (Zhang Rui) Virtualization: - Add ACS quirks for Intel I219-LM/V (Alex Williamson) - Restore ACS configuration as part of pci_restore_state() (Alexander Duyck) MSI: - Add pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu) - x86: Implement pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu) - Add helpers to manage pci_dev->irq and pci_dev->irq_managed (Jiang Liu) - Free legacy IRQ when enabling MSI/MSI-X (Jiang Liu) - ARM/PCI: Remove msi_controller from struct pci_sys_data (Lorenzo Pieralisi) - Remove unused pcibios_msi_controller() hook (Lorenzo Pieralisi) Generic host bridge driver: - Remove dependency on ARM-specific struct hw_pci (Jayachandran C) - Build setup-irq.o for arm64 (Jayachandran C) - Add arm64 support (Jayachandran C) APM X-Gene host bridge driver: - Add APM X-Gene PCIe 64-bit prefetchable window (Duc Dang) - Add support for a 64-bit prefetchable memory window (Duc Dang) - Drop owner assignment from platform_driver (Krzysztof Kozlowski) Broadcom iProc host bridge driver: - Allow BCMA bus driver to be built as module (Hauke Mehrtens) - Delete unnecessary checks before phy calls (Markus Elfring) - Add arm64 support (Ray Jui) Synopsys DesignWare host bridge driver: - Don't complain missing *config* reg space if va_cfg0 is set (Murali Karicheri) TI DRA7xx host bridge driver: - Disable pm_runtime on get_sync failure (Kishon Vijay Abraham I) - Add PM support (Kishon Vijay Abraham I) - Clear MSE bit during suspend so clocks will idle (Kishon Vijay Abraham I) - Add support to make GPIO drive PERST# line (Kishon Vijay Abraham I) Xilinx AXI host bridge driver: - Check for MSI interrupt flag before handling as INTx (Russell Joyce) Miscellaneous: - Fix Intersil/Techwell TW686[4589] AV capture class code (Krzysztof Hałasa) - Use PCI_CLASS_SERIAL_USB instead of bare number (Bjorn Helgaas) - Fix generic NCR 53c810 class code quirk (Bjorn Helgaas) - Fix TI816X class code quirk (Bjorn Helgaas) - Remove unused "pci_probe" flags (Bjorn Helgaas) - Host bridge driver code simplifications (Fabio Estevam) - Add dev_flags bit to access VPD through function 0 (Mark Rustad) - Add VPD function 0 quirk for Intel Ethernet devices (Mark Rustad) - Kill off set_irq_flags() usage (Rob Herring) - Remove Intel Cherrytrail D3 delays (Srinidhi Kasagar) - Clean up pci_find_capability() (Wei Yang)" * tag 'pci-v4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (72 commits) PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci PCI: imx6: Simplify a trivial if-return sequence PCI: spear: Use BUG_ON() instead of condition followed by BUG() PCI: dra7xx: Remove unneeded use of IS_ERR_VALUE() PCI: Remove pci_ats_enabled() PCI: Stop caching ATS Invalidate Queue Depth PCI: Move ATS declarations to linux/pci.h so they're all together PCI: Clean up ATS error handling PCI: Use pci_physfn() rather than looking up physfn by hand ...
2015-08-28Merge branches 'pci/enumeration' and 'pci/misc' into nextBjorn Helgaas
* pci/enumeration: PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci ARM/PCI: Set MPS before pci_bus_add_devices() * pci/misc: PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
2015-08-26PCI: Make pci_msi_setup_pci_dev() non-static for use by arch codeGuilherme G. Piccoli
Commit 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") changed the location of the code that initialises dev->msi_cap/msix_cap and then disables MSI/MSI-X interrupts at PCI probe time in devices that have this flag set. It moved the code from pci_msi_init_pci_dev() to a new function named pci_msi_setup_pci_dev(), called by pci_setup_device(). The pseries PCI probing code does not call pci_setup_device(), so since the aforementioned commit the function pci_msi_setup_pci_dev() is not called and MSI/MSI-X interrupts are left enabled. Additionally because dev->msi_cap/msix_cap are not initialised no driver can ever enable MSI/MSI-X. To fix this, the pseries PCI probe should manually call pci_msi_setup_pci_dev(), so this patch makes it non-static. Fixes: 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") [mpe: Update change log to mention dev->msi_cap/msix_cap] Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-25PCI: Add pci_ioremap_wc_bar()Luis R. Rodriguez
This lets drivers take advantage of PAT when available. It should help with the transition of converting video drivers over to ioremap_wc() to help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache(), see: de33c442ed2a ("x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()") Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: <syrjala@sci.fi> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Ville Syrjälä <syrjala@sci.fi> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: airlied@linux.ie Cc: benh@kernel.crashing.org Cc: dan.j.williams@intel.com Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: mst@redhat.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1440443613-13696-2-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-24PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCIZhang Rui
On multi-function JMicron SATA/PATA/AHCI devices, the PATA controller at function 1 doesn't work if it is powered on before the SATA controller at function 0. The result is that PATA doesn't work after resume, and we print messages like this: pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3 irq 17: nobody cared (try booting with the "irqpoll" option) Async resume was introduced in v3.15 by 76569faa62c4 ("PM / sleep: Asynchronous threads for resume_noirq"). Prior to that, we powered on the functions in order, so this problem shouldn't happen. e6b7e41cdd8c ("ata: Disabling the async PM for JMicron chip 363/361") solved the problem for JMicron 361 and 363 devices. With async suspend disabled, we always power on function 0 before function 1. Barto then reported the same problem with a JMicron 368 (see comment #57 in the bugzilla). Rather than extending the blacklist piecemeal, disable async suspend for all JMicron multi-function SATA/PATA/AHCI devices. This quirk could stay in the ahci and pata_jmicron drivers, but it's likely the problem will occur even if pata_jmicron isn't loaded until after the suspend/resume. Making it a PCI quirk ensures that we'll preserve the power-on order even if the drivers aren't loaded. [bhelgaas: changelog, limit to multi-function, limit to IDE/ATA] Link: https://bugzilla.kernel.org/show_bug.cgi?id=81551 Reported-and-tested-by: Barto <mister.freeman@laposte.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.15+
2015-08-24Merge branches 'pci/host-dra7xx', 'pci/host-imx6' and 'pci/host-spear' into nextBjorn Helgaas
* pci/host-dra7xx: PCI: dra7xx: Remove unneeded use of IS_ERR_VALUE() * pci/host-imx6: PCI: imx6: Simplify a trivial if-return sequence * pci/host-spear: PCI: spear: Use BUG_ON() instead of condition followed by BUG()
2015-08-24PCI: Set MPS to match upstream bridgeKeith Busch
Firmware typically configures the PCIe fabric with a consistent Max Payload Size setting based on the devices present at boot. A hot-added device typically has the power-on default MPS setting (128 bytes), which may not match the fabric. The previous Linux default, in the absence of any "pci=pcie_bus_*" options, was PCIE_BUS_TUNE_OFF, in which we never touch MPS, even for hot-added devices. Add a new default setting, PCIE_BUS_DEFAULT, in which we make sure every device's MPS setting matches the upstream bridge. This makes it more likely that a hot-added device will work in a system with optimized MPS configuration. Note that if we hot-add a device that only supports 128-byte MPS, it still likely won't work because we don't reconfigure the rest of the fabric. Booting with "pci=pcie_bus_peer2peer" is a workaround for this because it sets MPS to 128 for everything. [bhelgaas: changelog, new default, rework for pci_configure_device() path] Tested-by: Keith Busch <keith.busch@intel.com> Tested-by: Jordan Hargrave <jharg93@gmail.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2015-08-20PCI: Don't use 64-bit bus addresses on PA-RISCBjorn Helgaas
Meelis and Helge reported that 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") caused HPMCs on A500 and hangs on rp5470. PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so prior to 3a9ad0b4fdcd, we always used 32-bit PCI addresses. After 3a9ad0b4fdcd, we do use 64-bit PCI addresses in 64-bit kernels, and apparently there's some PA-RISC problem related to them. Fixes: 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.ee Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Helge Deller <deller@gmx.de> Tested-by: Helge Deller <deller@gmx.de> Based-on-idea-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.19+
2015-08-20PCI: Move MPS configuration check to pci_configure_device()Bjorn Helgaas
Previously we checked for invalid MPS settings, i.e., a device with MPS different than its upstream bridge, in pcie_bus_detect_mps(). We only did this if the arch or hotplug driver called pcie_bus_configure_settings(), and then only if PCIe bus tuning was disabled (PCIE_BUS_TUNE_OFF). Move the MPS checking code to pci_configure_device(), so we do it in the pci_device_add() path for every device. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-20PCI: Drop references acquired by of_parse_phandle()Bjorn Helgaas
of_parse_phandle() returns a device_node pointer with the refcount incremented. We should dispose of this reference when we're finished. Drop the reference acquired by of_parse_phandle(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-08-20PCI/MSI: Remove unused pcibios_msi_controller() hookLorenzo Pieralisi
The pcibios_msi_controller() hook was only implemented by ARM, and it sets pci_bus->msi now, so it doesn't need this hook anymore. Remove the unused pcibios_msi_controller() hook. [bhelgaas: changelog, split into separate patch] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-20ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi()Lorenzo Pieralisi
ARM previously stored the msi_controller pointer in its sysdata, struct pci_sys_data, and implemented pcibios_msi_controller() to retrieve it. That made PCI host controller drivers specific to ARM because they had to put the msi_controller pointer in the ARM-specific pci_sys_data. There is now a generic mechanism, pci_scan_root_bus_msi(), for giving the msi_controller pointer to the PCI core. Use this for all ARM systems and for the DesignWare and Xilinx PCI host controller drivers. This removes an ARM dependency from the DesignWare, DRA7xx, EXYNOS, i.MX6, Keystone, Layerscape, SPEAr13xx, and Xilinx drivers. [bhelgaas: changelog, split into separate patch] Suggested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> CC: Pratyush Anand <pratyush.anand@gmail.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Simon Horman <horms@verge.net.au> CC: Russell King <linux@arm.linux.org.uk> CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Michal Simek <michal.simek@xilinx.com> CC: Marc Zyngier <marc.zyngier@arm.com>
2015-08-20PCI: Add pci_scan_root_bus_msi()Lorenzo Pieralisi
Add a pci_scan_root_bus_msi() interface so an arch can specify the MSI controller up front. This removes the need for a pcibios callback to set the MSI controller later. This is not exported because I'd like to replace the variety of "scan root bus" interfaces with a single, more extensible interface that can handle the MSI controller, domain, pci_ops, resources, etc. I hope this interface is temporary. [bhelgaas: changelog, split into separate patch] Suggested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
2015-08-20PCI: generic: Add arm64 supportJayachandran C
Make pci-host-generic driver (kernel option PCI_HOST_GENERIC) available on arm64. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-20PCI: Build setup-irq.o for arm64Jayachandran C
ARM64 requires setup-irq.o to provide pci_fixup_irqs() implementation. We are adding this now to support the pci-host-generic host controller, but we enable it for ARM64 PCI so that other host controllers can use this as well. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-20PCI: generic: Remove dependency on ARM-specific struct hw_pciJayachandran C
The generic OF-based host controller driver uses pci_common_init_dev(), which is ARM-specific and requires the ARM struct hw_pci. The part of pci_common_init_dev() that is needed is limited and can be done here without using hw_pci. Note that the ARM pcibios functions expect the PCI sysdata to be a pointer to a struct pci_sys_data. Add a struct pci_sys_data as the first element in struct gen_pci so that when we use a gen_pci pointer as sysdata, it is also a pointer to a struct pci_sys_data. Create and scan the root bus directly without using the ARM pci_common_init_dev() interface. [bhelgaas: changelog, move pcie_bus_configure_settings() before pci_bus_add_devices(), combine !PCI_PROBE_ONLY blocks] Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Tested-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-08-20PCI: imx6: Simplify a trivial if-return sequenceFabio Estevam
Simplify a trivial if-return sequence by combining it with a preceding function call. The semantic patch that makes this change is available in scripts/coccinelle/misc/simple_return.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Lucas Stach <l.stach@pengutronix.de>
2015-08-20PCI: spear: Use BUG_ON() instead of condition followed by BUG()Fabio Estevam
Use BUG_ON() instead of an if condition followed by BUG(). The semantic patch that makes this change is available in scripts/coccinelle/misc/bugon.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Pratyush Anand <pratyush.anand@gmail.com>
2015-08-20PCI: dra7xx: Remove unneeded use of IS_ERR_VALUE()Fabio Estevam
There is no need to use the IS_ERR_VALUE() macro for checking the return value from pm_runtime_* functions. Test for a negative pm_runtime_get_sync() return value instead of using IS_ERR_VALUE(). The semantic patch that makes this change is available in scripts/coccinelle/api/pm_runtime.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Kishon Vijay Abraham I <kishon@ti.com>
2015-08-19PCI: Tolerate hierarchies with no Root PortYijing Wang
We should not assume any particular hardware topology. Commit d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") relied on the assumption that every PCIe hierarchy is rooted at a Root Port. But we can't rely on any assumption about what hardware we will find; we just have to deal with the world as it is. On some platforms, PCIe devices (endpoints, switch upstream ports, etc.) appear directly on the root bus, and there is no Root Port in the PCI bus hierarchy. For example, Meelis observed these top-level devices on a Sparc V245: 0000:02:00.0 PCI bridge to [bus 03-0d] Switch Upstream Port 0001:02:00.0 PCI bridge to [bus 03] PCIe to PCI/PCI-X Bridge These devices *look* like they have links going upstream, but there really are no upstream devices. In set_pcie_port_type(), we used the parent device to figure out which side of a switch port has a link, so if the parent device did not exist, we dereferenced a NULL parent pointer. Check whether the parent device exists before dereferencing it. Meelis observed this oops on Sparc V245 and T2000. Ben Herrenschmidt says this is also possible on IBM PowerVM guests on PowerPC. [bhelgaas: changelog, comment] Link: http://lkml.kernel.org/r/alpine.LRH.2.20.1508122118210.18637@math.ut.ee Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net>
2015-08-18PCI: xilinx: Fix typo in function nameJiang Liu
There's a typo in commit e39758e0ea76 in linux-next, which incorrectly spells "msi_desc_to_pci_sysdata()" as "msi_desc_to_pci_sys_data()" and causes build failure: > ../drivers/pci/host/pcie-xilinx.c:235:3: error: implicit declaration of function 'msi_desc_to_pci_sys_data' [-Werror=implicit-function-declaration] Fixes: e39758e0ea76 "PCI: Use helper functions to access fields in struct msi_desc" Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Brown <broonie@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: Srikanth Thokala <sthokal@xilinx.com> Cc: Rob Herring <robh@kernel.org> Cc: Yijing Wang <wangyijing@huawei.com> Link: http://lkml.kernel.org/r/1439912763-10645-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-14Merge branches 'pci/host-dra7xx' and 'pci/host-iproc' into nextBjorn Helgaas
* pci/host-dra7xx: ARM: dts: am57xx-evm: Add 'gpios' property with gpio2_8 PCI: dra7xx: Add support to make GPIO drive PERST# line PCI: dra7xx: Clear MSE bit during suspend so clocks will idle PCI: dra7xx: Add PM support PCI: dra7xx: Disable pm_runtime on get_sync failure * pci/host-iproc: PCI: iproc: Allow BCMA bus driver to be built as module PCI: iproc: Add arm64 support PCI: iproc: Delete unnecessary checks before phy calls
2015-08-14Merge branches 'pci/hotplug', 'pci/iommu', 'pci/irq' and ↵Bjorn Helgaas
'pci/virtualization' into next * pci/hotplug: PCI: pciehp: Remove ignored MRL sensor interrupt events PCI: pciehp: Remove unused interrupt events PCI: pciehp: Handle invalid data when reading from non-existent devices PCI: Hold pci_slot_mutex while searching bus->slots list PCI: Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem PCI: pciehp: Simplify pcie_poll_cmd() PCI: Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot * pci/iommu: PCI: Remove pci_ats_enabled() PCI: Stop caching ATS Invalidate Queue Depth PCI: Move ATS declarations to linux/pci.h so they're all together PCI: Clean up ATS error handling PCI: Use pci_physfn() rather than looking up physfn by hand PCI: Inline the ATS setup code into pci_ats_init() PCI: Rationalize pci_ats_queue_depth() error checking PCI: Reduce size of ATS structure elements PCI: Embed ATS info directly into struct pci_dev PCI: Allocate ATS struct during enumeration iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth * pci/irq: PCI: Kill off set_irq_flags() usage * pci/virtualization: PCI: Add ACS quirks for Intel I219-LM/V
2015-08-13PCI: Remove pci_ats_enabled()Bjorn Helgaas
Remove pci_ats_enabled(). There are no callers outside the ATS code itself. We don't need to check ats_cap, because if we don't find an ATS capability, we'll never set ats_enabled. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Stop caching ATS Invalidate Queue DepthBjorn Helgaas
Stop caching the Invalidate Queue Depth in struct pci_dev. pci_ats_queue_depth() is typically called only once per device, and it returns a fixed value per-device, so callers who need the value frequently can cache it themselves. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Clean up ATS error handlingBjorn Helgaas
There's no need to BUG() if we enable ATS when it's already enabled. We don't need to BUG() when disabling ATS on a device that doesn't support ATS or if it's already disabled. If ATS is enabled, certainly we found an ATS capability in the past, so it should still be there now. Clean up these error paths. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Use pci_physfn() rather than looking up physfn by handBjorn Helgaas
Use the pci_physfn() helper rather than looking up physfn by hand. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Inline the ATS setup code into pci_ats_init()Bjorn Helgaas
The ATS setup code in ats_alloc_one() is only used by pci_ats_init(), so inline it there. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Rationalize pci_ats_queue_depth() error checkingBjorn Helgaas
We previously returned -ENODEV for devices that don't support ATS (except that we always returned 0 for VFs, whether or not they support ATS). For consistency, always return -EINVAL (not -ENODEV) if the device doesn't support ATS. Return zero for VFs that support ATS. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Embed ATS info directly into struct pci_devBjorn Helgaas
The pci_ats struct is small and will get smaller, so I don't think it's worth allocating it separately from the pci_dev struct. Embed the ATS fields directly into struct pci_dev. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-13PCI: Allocate ATS struct during enumerationBjorn Helgaas
Previously, we allocated pci_ats structures when an IOMMU driver called pci_enable_ats(). An SR-IOV VF shares the STU setting with its PF, so when enabling ATS on the VF, we allocated a pci_ats struct for the PF if it didn't already have one. We held the sriov->lock to serialize threads concurrently enabling ATS on several VFS so only one would allocate the PF pci_ats. Gregor reported a deadlock here: pci_enable_sriov sriov_enable virtfn_add mutex_lock(dev->sriov->lock) # acquire sriov->lock pci_device_add device_add BUS_NOTIFY_ADD_DEVICE notifier chain iommu_bus_notifier amd_iommu_add_device # iommu_ops.add_device init_iommu_group iommu_group_get_for_dev iommu_group_add_device __iommu_attach_device amd_iommu_attach_device # iommu_ops.attach_device attach_device pci_enable_ats mutex_lock(dev->sriov->lock) # deadlock There's no reason to delay allocating the pci_ats struct, and if we allocate it for each device at enumeration-time, there's no need for locking in pci_enable_ats(). Allocate pci_ats struct during enumeration, when we initialize other capabilities. Note that this implementation requires ATS to be enabled on the PF first, before on any of the VFs because the PF controls the STU for all the VFs. Link: http://permalink.gmane.org/gmane.linux.kernel.iommu/9433 Reported-by: Gregor Dick <gdick@solarflare.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2015-08-11PCI: dra7xx: Add support to make GPIO drive PERST# lineKishon Vijay Abraham I
The PERST# line in am57x-evm is connected to a GPIO line and PERST# should be driven high to indicate the clocks are stable (As per Figure 2-10: Power Up of the PCIe CEM spec 3.0). Add support to make GPIO drive PERST# line. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-11PCI: dra7xx: Clear MSE bit during suspend so clocks will idleKishon Vijay Abraham I
DRA7xx requires the MSE bit to be cleared to set the master in standby mode. (In DRA7xx TRM_vE, section 24.9.4.5.2.2.1 PCIe Controller Master Standby Behavior advises to use the clearing of the local MSE bit to set the master in standby. Without this some of the clocks do not idle). Clear the MSE bit on suspend and enable it on resume. Clearing MSE bit is required to get clocks to be idled after suspend. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
2015-08-11PCI: dra7xx: Add PM supportKishon Vijay Abraham I
Add PM support to pci-dra7xx so PCI clocks can be disabled during suspend and enabled during resume without affecting PCI functionality. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jingoo Han <jingoohan1@gmail.com>