summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2010-01-04PCIe AER: prevent AER injection if hardware masks error reportingYouquan,Song
The Correcteable/Uncorrectable Error Mask Registers are used by PCIe AER driver which will controls the reporting of individual errors to PCIe RC via PCIe error messages. If hardware masks special error reporting to RC, the aer_inject driver should not inject aer error. Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Youquan, Song <youquan.song@intel.com> Acked-by: Ying, Huang <ying.huang@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-04PCI/PM: Use per-device D3 delaysRafael J. Wysocki
It turns out that some PCI devices require extra delays when changing power state from D3 to D0 (and the other way around). Although this is against the PCI specification, we can handle it quite easily by allowing drivers to define arbitrary D3 delays for devices known to require extra time for switching power states. Introduce additional field d3_delay in struct pci_dev and use it to store the value of the device's D0->D3 delay, in miliseconds. Make the PCI PM core code use the per-device d3_delay unless pci_pm_d3_delay is greater (in which case the latter is used). [This also allows the driver to specify d3_delay shorter than the 10 ms required by the PCI standard if the device is known to be able to handle that.] Make the sky2 driver set d3_delay to 150 for devices handled by it. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14730 which is a listed regression from 2.6.30. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-04PCI: Check the node argument passed to cpumask_of_nodeDavid John
Commit e0cd516 "PCI: derive nearby CPUs from device's instead of bus' NUMA information" causes an null pointer dereference when reading from the sysfs attributes local_cpu* on Intel machines with no ACPI NUMA proximity info, since dev->numa_node gets set to -1 for all PCI devices, which then gets passed to cpumask_of_node. Add a check to prevent this. Signed-off-by: David John <davidjon@xenontk.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-04PCI: AER: fix aer inject result in kernel oopsYouquan,Song
If the BIOS does not export _OSC to allow OS take over the PCIe AER, the pcie aer driver will not initialize the aer service. However, the aer_inject driver does not check this scenario, which results in a kernel oops when injecting an aer error into OS. For example: BUG: unable to handle kernel NULL pointer dereference at 0000000000000350 IP: [<ffffffff812e08f7>] _spin_lock_irqsave+0xc/0x23 PGD 155c41067 PUD 157fe0067 PMD 0 Oops: 0002 [#1] SMP Pid: 5119, comm: aer-inject Not tainted 2.6.32-rc8-mce #2 RIP: 0010:[<ffffffff812e08f7>] [<ffffffff812e08f7>] _spin_lock_irqsave+0xc/0x23 RSP: 0018:ffff880157f81e28 EFLAGS: 00010096 RAX: 0000000000000296 RBX: 0000000000000000 RCX: 0000000000000100 RDX: 0000000000010000 RSI: 0000000000000246 RDI: 0000000000000350 RBP: ffff880157f81e28 R08: 0000000000000004 R09: ffff880157f81dac R10: ffff88015a666f60 R11: ffff88015a666f40 R12: ffff88015758cc00 R13: 0000000000000350 R14: 0000000000000000 R15: 0000000000000100 FS: 00007f4d4a66e6f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000350 CR3: 000000015661a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process aer-inject (pid: 5119, threadinfo ffff880157f80000, task ffff8801585f4340) Stack: ffff880157f81e78 ffffffff811b1615 ffff880157f81e78 ffffffff81222823 Call Trace: [<ffffffff811b1615>] aer_irq+0x38/0x117 [<ffffffff81222823>] ? device_for_each_child+0x5f/0x6f [<ffffffffa00967bf>] aer_inject_write+0x409/0x45e [aer_inject] [<ffffffff810eb80e>] vfs_write+0xae/0x16a [<ffffffff810eb98e>] sys_write+0x47/0x6e [<ffffffff8100ba2b>] system_call_fastpath+0x16/0x1b RIP [<ffffffff812e08f7>] _spin_lock_irqsave+0xc/0x23 RSP <ffff880157f81e28> CR2: 0000000000000350 So check the _OSC before assuming that AER is available to the OS. Signed-off-by: Youquan, Song <youquan.song@intel.com> Acked-by: Ying, Huang <ying.huang@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-04PCI: pcie portdrv: style cleanupHidetoshi Seto
No change in logic. Before: drivers/pci/pcie/portdrv_core.c: total: 7 errors, 2 warnings, 508 lines checked drivers/pci/pcie/portdrv_pci.c: total: 4 errors, 2 warnings, 300 lines checked After: drivers/pci/pcie/portdrv_core.c: total: 0 errors, 0 warnings, 506 lines checked drivers/pci/pcie/portdrv_pci.c: total: 0 errors, 0 warnings, 299 lines checked Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-31pci: avoid compiler warning in quirks.cLinus Torvalds
Introduced by commit 5b889bf23 ("PCI: Fix build if quirks are not enabled"), which made the pci_dev_reset_methods[] array static and 'const', but didn't then change the code to match, and use a const pointer when moving it to quirks.c. Trivially fixed by just adding the required 'const' to the iterator variable. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-31PCI: Fix build if quirks are not enabledRafael J. Wysocki
After commit b9c3b266411d27f1a6466c19d146d08db576bfea ("PCI: support device-specific reset methods") the kernel build is broken if CONFIG_PCI_QUIRKS is unset. Fix this by moving pci_dev_specific_reset() to drivers/pci/quirks.c and providing an empty replacement for !CONFIG_PCI_QUIRKS builds. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI/cardbus: Add a fixup hook and fix powerpc PCI: change PCI nomenclature in drivers/pci/ (non-comment changes) PCI: change PCI nomenclature in drivers/pci/ (comment changes) PCI: fix section mismatch on update_res() PCI: add Intel 82599 Virtual Function specific reset method PCI: add Intel USB specific reset method PCI: support device-specific reset methods PCI: Handle case when no pci device can provide cache line size hint PCI/PM: Propagate wake-up enable for PCIe devices too vgaarbiter: fix a typo in the vgaarbiter Documentation
2009-12-16PCI/cardbus: Add a fixup hook and fix powerpcBenjamin Herrenschmidt
The cardbus code creates PCI devices without ever going through the necessary fixup bits and pieces that normal PCI devices go through. There's in fact a commented out call to pcibios_fixup_bus() in there, it's commented because ... it doesn't work. I could make pcibios_fixup_bus() do the right thing on powerpc easily but I felt it cleaner instead to provide a specific hook pci_fixup_cardbus for which a weak empty implementation is provided by the PCI core. This fixes cardbus on powerbooks and probably all other PowerPC platforms which was broken completely for ever on some platforms and since 2.6.31 on others such as PowerBooks when we made the DMA ops mandatory (since those are setup by the fixups). Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16PCI: change PCI nomenclature in drivers/pci/ (non-comment changes)Stefan Assmann
Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern non-comment parts or anything that might be visible to the user. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16PCI: change PCI nomenclature in drivers/pci/ (comment changes)Stefan Assmann
Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern comments only. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16PCI: add Intel 82599 Virtual Function specific reset methodDexuan Cui
Handle device specific timeout and use FLR. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16PCI: add Intel USB specific reset methodDexuan Cui
Handle device specific reset requirements (i.e. vendor reg for reset along with appropriate timeout). Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16PCI: support device-specific reset methodsDexuan Cui
Add a new type of quirk for resetting devices at pci_dev_reset time. This is necessary to handle device with nonstandard reset procedures, especially useful for guest drivers. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16PCI: Handle case when no pci device can provide cache line size hintCsaba Henk
Prior to this patch, if pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, ...) returns 0 for all dev, pci_cache_line_size ends up set to zero (instead of pci_dfl_cache_line_size). This patch ensures the pci_cache_line_size = pci_dfl_cache_line_size setting in the above scenario. This happens in case of a kvm-88 guest (where, consequently, the rtl8139 NIC failed to initialize). Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Csaba Henk <csaba@gluster.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16PCI/PM: Propagate wake-up enable for PCIe devices tooRafael J. Wysocki
Having read the PM part of the PCIe 2.0 specification more carefully I think that it was a mistake to restrict the wake-up enable propagation to non-PCIe devices, because if we do not request control of the root ports' PME registers via OSC, PCIe PME is supposed to be handled by the platform, just like the non-PCIe PME. Even if we do that, the wake-up propagation is done to allow the devices to wake up the system from sleep states which involves the platform anyway, so it won't hurt. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: implement early_io{re,un}map for ia64 Revert "Intel IOMMU: Avoid memory allocation failures in dma map api calls" intel-iommu: ignore page table validation in pass through mode intel-iommu: Fix oops with intel_iommu=igfx_off intel-iommu: Check for an RMRR which ends before it starts. intel-iommu: Apply BIOS sanity checks for interrupt remapping too. intel-iommu: Detect DMAR in hyperspace at probe time. dmar: Fix build failure without NUMA, warn on bogus RHSA tables and don't abort iommu: Allocate dma-remapping structures using numa locality info intr_remap: Allocate intr-remapping table using numa locality info dmar: Allocate queued invalidation structure using numa locality info dmar: support for parsing Remapping Hardware Static Affinity structure
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-11Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (109 commits) PCI: fix coding style issue in pci_save_state() PCI: add pci_request_acs PCI: fix BUG_ON triggered by logical PCIe root port removal PCI: remove ifdefed pci_cleanup_aer_correct_error_status PCI: unconditionally clear AER uncorr status register during cleanup x86/PCI: claim SR-IOV BARs in pcibios_allocate_resource PCI: portdrv: remove redundant definitions PCI: portdrv: remove unnecessary struct pcie_port_data PCI: portdrv: minor cleanup for pcie_port_device_register PCI: portdrv: add missing irq cleanup PCI: portdrv: enable device before irq initialization PCI: portdrv: cleanup service irqs initialization PCI: portdrv: check capabilities first PCI: portdrv: move PME capability check PCI: portdrv: remove redundant pcie type calculation PCI: portdrv: cleanup pcie_device registration PCI: portdrv: remove redundant pcie_port_device_probe PCI: Always set prefetchable base/limit upper32 registers PCI: read-modify-write the pcie device control register when initiating pcie flr PCI: show dma_mask bits in /sys ... Fixed up conflicts in: arch/x86/kernel/amd_iommu_init.c drivers/pci/dmar.c drivers/pci/hotplug/acpiphp_glue.c
2009-12-09Merge branch 'acpica' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPICA: Update version to 20091112. ACPICA: Add additional module-level code support ACPICA: Deploy new create integer interface where appropriate ACPICA: New internal utility function to create Integer objects ACPICA: Add repair for predefined methods that must return sorted lists ACPICA: Fix possible fault if return Package objects contain NULL elements ACPICA: Add post-order callback to acpi_walk_namespace ACPICA: Change package length error message to an info message ACPICA: Reduce severity of predefined repair messages, Warning to Info ACPICA: Update version to 20091013 ACPICA: Fix possible memory leak for Scope ASL operator ACPICA: Remove possibility of executing _REG methods twice ACPICA: Add repair for bad _MAT buffers ACPICA: Add repair for bad _BIF/_BIX packages
2009-12-08Merge branch 'timers-for-linus-hpet' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: hpet: Make WARN_ON understandable x86: arch specific support for remapping HPET MSIs intr-remap: generic support for remapping HPET MSIs x86, hpet: Simplify the HPET code x86, hpet: Disable per-cpu hpet timer if ARAT is supported
2009-12-08Revert "Intel IOMMU: Avoid memory allocation failures in dma map api calls"KOSAKI Motohiro
commit eb3fa7cb51 said Intel IOMMU Intel IOMMU driver needs memory during DMA map calls to setup its internal page tables and for other data structures. As we all know that these DMA map calls are mostly called in the interrupt context or with the spinlock held by the upper level drivers(network/storage drivers), so in order to avoid any memory allocation failure due to low memory issues, this patch makes memory allocation by temporarily setting PF_MEMALLOC flags for the current task before making memory allocation calls. We evaluated mempools as a backup when kmem_cache_alloc() fails and found that mempools are really not useful here because 1) We don't know for sure how much to reserve in advance 2) And mempools are not useful for GFP_ATOMIC case (as we call memory alloc functions with GFP_ATOMIC) (akpm: point 2 is wrong...) The above description doesn't justify to waste system emergency memory at all. Non MM subsystem must not use PF_MEMALLOC. Memory reclaim need few memory, anyone must not prevent it. Otherwise the system cause mysterious hang-up and/or OOM Killer invokation. Plus, akpm already pointed out what we should do. Then, this patch revert it. Cc: Keshavamurthy Anil S <anil.s.keshavamurthy@intel.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-12-08intel-iommu: ignore page table validation in pass through modeChris Wright
We are seeing a bug when booting w/ iommu=pt with current upstream (bisect blames 19943b0e30b05d42e494ae6fef78156ebc8c637e "intel-iommu: Unify hardware and software passthrough support). The issue is specific to this loop during identity map initialization of each device: domain_context_mapping_one(si_domain, ..., CONTEXT_TT_PASS_THROUGH) ... /* Skip top levels of page tables for * iommu which has less agaw than default. */ for (agaw = domain->agaw; agaw != iommu->agaw; agaw--) { pgd = phys_to_virt(dma_pte_addr(pgd)); if (!dma_pte_present(pgd)) { <------ failing here spin_unlock_irqrestore(&iommu->lock, flags); return -ENOMEM; } This box has 2 iommu's in it. The catchall iommu has MGAW == 48, and SAGAW == 4. The other iommu has MGAW == 39, SAGAW == 2. The device that's failing the above pgd test is the only device connected to the non-catchall iommu, which has a smaller address width than the domain default. This test is not necessary since the context is in PT mode and the ASR is ignored. Thanks to Don Dutile for discovering and debugging this one. Cc: stable@kernel.org Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-12-08intel-iommu: Fix oops with intel_iommu=igfx_offDavid Woodhouse
The hotplug notifier will call find_domain() to see if the device in question has been assigned an IOMMU domain. However, this should never be called for devices with a "dummy" domain, such as graphics devices when intel_iommu=igfx_off is set and the corresponding IOMMU isn't even initialised. If you do that, it'll oops as it dereferences the (-1) pointer. The notifier function should check iommu_no_mapping() for the device before doing anything else. Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-12-08intel-iommu: Check for an RMRR which ends before it starts.David Woodhouse
Some HP BIOSes report an RMRR region (a region which needs a 1:1 mapping in the IOMMU for a given device) which has an end address lower than its start address. Detect that and warn, rather than triggering the BUG() in dma_pte_clear_range(). Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-12-08intel-iommu: Apply BIOS sanity checks for interrupt remapping too.David Woodhouse
The BIOS errors where an IOMMU is reported either at zero or a bogus address are causing problems even when the IOMMU is disabled -- because interrupt remapping uses the same hardware. Ensure that the checks get applied for the interrupt remapping initialisation too. Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-12-08intel-iommu: Detect DMAR in hyperspace at probe time.Chris Wright
Many BIOSes will lie to us about the existence of an IOMMU, and claim that there is one at an address which actually returns all 0xFF. We need to detect this early, so that we know we don't have a viable IOMMU and can set up swiotlb before it's too late. Cc: stable@kernel.org Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-12-08Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Merge the BIOS workarounds from 2.6.32, and the swiotlb fallback on failure.
2009-12-05Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits) x86, Calgary IOMMU quirk: Find nearest matching Calgary while walking up the PCI tree x86/amd-iommu: Remove amd_iommu_pd_table x86/amd-iommu: Move reset_iommu_command_buffer out of locked code x86/amd-iommu: Cleanup DTE flushing code x86/amd-iommu: Introduce iommu_flush_device() function x86/amd-iommu: Cleanup attach/detach_device code x86/amd-iommu: Keep devices per domain in a list x86/amd-iommu: Add device bind reference counting x86/amd-iommu: Use dev->arch->iommu to store iommu related information x86/amd-iommu: Remove support for domain sharing x86/amd-iommu: Rearrange dma_ops related functions x86/amd-iommu: Move some pte allocation functions in the right section x86/amd-iommu: Remove iommu parameter from dma_ops_domain_alloc x86/amd-iommu: Use get_device_id and check_device where appropriate x86/amd-iommu: Move find_protection_domain to helper functions x86/amd-iommu: Simplify get_device_resources() x86/amd-iommu: Let domain_for_device handle aliases x86/amd-iommu: Remove iommu specific handling from dma_ops path x86/amd-iommu: Remove iommu parameter from __(un)map_single x86/amd-iommu: Make alloc_new_range aware of multiple IOMMUs ...
2009-12-04PCI: fix coding style issue in pci_save_state()Kleber Sacilotto de Souza
Remove a stray space in pci_save_state(). Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: add pci_request_acsChris Wright
Commit ae21ee65e8bc228416bbcc8a1da01c56a847a60c "PCI: acs p2p upsteram forwarding enabling" doesn't actually enable ACS. Add a function to pci core to allow an IOMMU to request that ACS be enabled. The existing mechanism of using iommu_found() in the pci core to know when ACS should be enabled doesn't actually work due to initialization order; iommu has only been detected not initialized. Have Intel and AMD IOMMUs request ACS, and Xen does as well during early init of dom0. Cc: Allen Kay <allen.m.kay@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: fix BUG_ON triggered by logical PCIe root port removalKenji Kaneshige
This problem happened when removing PCIe root port using PCI logical hotplug operation. The immediate cause of this problem is that the pointer to invalid data structure is passed to pcie_update_aspm_capable() by pcie_aspm_exit_link_state(). When pcie_aspm_exit_link_state() received a pointer to root port link, it unconfigures the root port link and frees its data structure at first. At this point, there are not links to configure under the root port and the data structure for root port link is already freed. So pcie_aspm_exit_link_state() must not call pcie_update_aspm_capable() and pcie_config_aspm_path(). This patch fixes the problem by changing pcie_aspm_exit_link_state() not to call pcie_update_aspm_capable() and pcie_config_aspm_path() if the specified link is root port link. ------------[ cut here ]------------ kernel BUG at drivers/pci/pcie/aspm.c:606! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:40/0000:40:13.0/remove CPU 1 Modules linked in: shpchp Pid: 9345, comm: sysfsd Not tainted 2.6.32-rc5 #98 ProLiant DL785 G6 RIP: 0010:[<ffffffff811df69b>] [<ffffffff811df69b>] pcie_update_aspm_capable+0x15/0xbe RSP: 0018:ffff88082a2f5ca0 EFLAGS: 00010202 RAX: 0000000000000e77 RBX: ffff88182cc3e000 RCX: ffff88082a33d006 RDX: 0000000000000001 RSI: ffffffff811dff4a RDI: ffff88182cc3e000 RBP: ffff88082a2f5cc0 R08: ffff88182cc3e000 R09: 0000000000000000 R10: ffff88182fc00180 R11: ffff88182fc00198 R12: ffff88182cc3e000 R13: 0000000000000000 R14: ffff88182cc3e000 R15: ffff88082a2f5e20 FS: 00007f259a64b6f0(0000) GS:ffff880864600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00007feb53f73da0 CR3: 000000102cc94000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sysfsd (pid: 9345, threadinfo ffff88082a2f4000, task ffff88082a33cf00) Stack: ffff88182cc3e000 ffff88182cc3e000 0000000000000000 ffff88082a33cf00 <0> ffff88082a2f5cf0 ffffffff811dff52 ffff88082a2f5cf0 ffff88082c525168 <0> ffff88402c9fd2f8 ffff88402c9fd2f8 ffff88082a2f5d20 ffffffff811d7db2 Call Trace: [<ffffffff811dff52>] pcie_aspm_exit_link_state+0xf5/0x11e [<ffffffff811d7db2>] pci_stop_bus_device+0x76/0x7e [<ffffffff811d7d67>] pci_stop_bus_device+0x2b/0x7e [<ffffffff811d7e4f>] pci_remove_bus_device+0x15/0xb9 [<ffffffff811dcb8c>] remove_callback+0x29/0x3a [<ffffffff81135aeb>] sysfs_schedule_callback_work+0x15/0x6d [<ffffffff81072790>] worker_thread+0x19d/0x298 [<ffffffff8107273b>] ? worker_thread+0x148/0x298 [<ffffffff81135ad6>] ? sysfs_schedule_callback_work+0x0/0x6d [<ffffffff810765c0>] ? autoremove_wake_function+0x0/0x38 [<ffffffff810725f3>] ? worker_thread+0x0/0x298 [<ffffffff8107629e>] kthread+0x7d/0x85 [<ffffffff8102eafa>] child_rip+0xa/0x20 [<ffffffff8102e4bc>] ? restore_args+0x0/0x30 [<ffffffff81076221>] ? kthread+0x0/0x85 [<ffffffff8102eaf0>] ? child_rip+0x0/0x20 Code: 89 e5 8a 50 48 31 c0 c0 ea 03 83 e2 07 e8 b2 de fe ff c9 48 98 c3 55 48 89 e5 41 56 49 89 fe 41 55 41 54 53 48 83 7f 10 00 74 04 <0f> 0b eb fe 48 8b 05 da 7d 63 00 4c 8d 60 e8 4c 89 e1 eb 24 4c RIP [<ffffffff811df69b>] pcie_update_aspm_capable+0x15/0xbe RSP <ffff88082a2f5ca0> ---[ end trace 6ae0f65bdeab8555 ]--- Reported-by: Alex Chiang <achiang@hp.com> Tested-by: Alex Chiang <achiang@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: remove ifdefed pci_cleanup_aer_correct_error_statusAndrew Patterson
The pci_cleanup_aer_correct_error_status() function has been #if 0'd out since 2.6.25. Time to remove the dead code. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: unconditionally clear AER uncorr status register during cleanupAndrew Patterson
The current implementation of pci_cleanup_aer_uncorrect_error_status only clears either fatal or non-fatal error status bits depending on the state of the I/O channel. This implementation will then often leave some bits set after PCI error recovery completes. The uncleared bit settings will then be falsely reported the next time an AER interrupt is generated for that hierarchy. An easy way to illustrate this issue is to use the aer-inject module to simultaneously inject both an uncorrectable non-fatal and uncorrectable fatal error. One of the errors will not be cleared. This patch resolves this issue by unconditionally clearing all bits in the AER uncorrectable status register. All settings and corrective action strategies are saved and determined before pci_cleanup_aer_uncorrect_error_status is called, so this change should not affect errory handling functionality. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: remove redundant definitionsKenji Kaneshige
Remove unnecessary definitions from portdrv.h and use generic definitions instead. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: remove unnecessary struct pcie_port_dataKenji Kaneshige
Remove 'port_type' field in struct pcie_port_data(), because we can get port type information from struct pci_dev. With this change, this patch also does followings: - Remove struct pcie_port_data because it no longer has any field. - Remove portdrv private definitions about port type (PCIE_RC_PORT, PCIE_SW_UPSTREAM_PORT and PCIE_SW_DOWNSTREAM_PORT), and use generic definitions instead. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: minor cleanup for pcie_port_device_registerKenji Kaneshige
Minor cleanups for pcie_port_device_register(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: add missing irq cleanupKenji Kaneshige
Add missing service irqs cleanup in the error code path of pcie_port_device_register(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: enable device before irq initializationKenji Kaneshige
Call pci_enable_device() before initializing service irqs, because legacy interrupt is initialized in pci_enable_device() on some architectures. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: cleanup service irqs initializationKenji Kaneshige
This patch cleans up the service irqs initialization as follows: - Remove 'irq_mode' field in pcie_port_data and related definitions, which is not needed because we can get the same information from 'is_msix', 'is_msi' and 'pin' fields in struct pci_dev. - Change the name of 'vectors' argument of assign_interrupt_mode() to 'irqs' because it holds irq numbers actually. People might confuse it with CPU vector or MSI/MSI-X vector. - Change function name assign_interrupt_mode() to init_service_irqs() becasuse we no longer have 'irq_mode' data structure, and new name is more straightforward (IMO). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: check capabilities firstKenji Kaneshige
Move capability check capability to the beginning of pcie_port_device_register() prevents redundant execution path. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: move PME capability checkKenji Kaneshige
No reason to check PME capability outside get_port_device_capability(). Do it in get_port_device_capability(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: remove redundant pcie type calculationKenji Kaneshige
PCIe port type is already stored in 'pcie_type' field of struct pci_dev. So we don't need to get it from pci configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: cleanup pcie_device registrationKenji Kaneshige
In the current port bus driver implementation, pcie_device allocation, initialization and registration are done in separated functions. Doing those in one function make the code simple and easier to read. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: remove redundant pcie_port_device_probeKenji Kaneshige
We don't need pcie_port_device_probe() because we can get pci device/port type using pci_is_pcie() and 'pcie_type' fields in struct pci_dev. Remove pcie_port_device_probe(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: Always set prefetchable base/limit upper32 registersAlex Williamson
Prior to 1f82de10 we always initialized the upper 32bits of the prefetchable memory window, regardless of the address range used. Now we only touch it for a >32bit address, which means the upper32 registers remain whatever the BIOS initialized them too. It's valid for the BIOS to set the upper32 base/limit to 0xffffffff/0x00000000, which makes us program prefetchable ranges like 0xffffffffabc00000 - 0x00000000abc00000 Revert the chunk of 1f82de10 that made this conditional so we always write the upper32 registers and remove now unused pref_mem64 variable. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: read-modify-write the pcie device control register when initiating pcie flrShmulik Ravid
The pcie_flr routine writes the device control register with the FLR bit set clearing all other fields for the FLR duration. Among other fields, the Max_Payload_Size is also cleared which can cause errors if there are transactions lurking in the HW pipeline. The patch replaces the blank write with read-modify-write of the control register keeping the other fields intact. Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: show dma_mask bits in /sysYinghai Lu
So we can catch if the driver sets an incorrect dma_mask. Reviewed-by: Grant Grundler <grundler@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: add debug output for DMA mask infoYinghai Lu
This allows us to find out what DMA mask is used for each PCI device at boot time; useful for debugging. After the patch: ehci_hcd 0000:00:02.1: using 31bit consistent DMA mask e1000 0000:0b:01.0: using 64bit DMA mask e1000 0000:0b:01.0: using 64bit consistent DMA mask e1000e 0000:04:00.0: using 64bit DMA mask e1000e 0000:04:00.0: using 64bit consistent DMA mask ixgb 0000:0c:01.0: using 64bit DMA mask ixgb 0000:0c:01.0: using 64bit consistent DMA mask aacraid 0000:86:00.0: using 32bit DMA mask aacraid 0000:86:00.0: using 32bit consistent DMA mask aacraid 0000:86:00.0: using 64bit DMA mask aacraid 0000:86:00.0: using 64bit consistent DMA mask qla2xxx 0000:0c:02.0: using 64bit consistent DMA mask qla2xxx 0000:0c:02.1: using 64bit consistent DMA mask lpfc 0000:06:00.0: using 64bit DMA mask lpfc 0000:06:00.1: using 64bit DMA mask pata_amd 0000:00:06.0: using 32bit DMA mask pata_amd 0000:00:06.0: using 32bit consistent DMA mask mptsas 0000:0c:04.0: using 64bit DMA mask mptsas 0000:0c:04.0: using 64bit consistent DMA mask forcedeth 0000:00:08.0: using 39bit DMA mask forcedeth 0000:00:08.0: using 39bit consistent DMA mask niu 0000:02:00.0: using 44bit DMA mask niu 0000:02:00.0: using 44bit consistent DMA mask sata_nv 0000:00:05.0: using 32bit DMA mask sata_nv 0000:00:05.0: using 32bit consistent DMA mask ib_mthca 0000:03:00.0: using 64bit DMA mask ib_mthca 0000:03:00.0: using 64bit consistent DMA mask Reviewed-by: Grant Grundler <grundler@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: ibmphp_hpc: don't release hw sem twice if kthread stopsJesse Barnes
If we stop the kthread, we may end up up'ing the sem twice, which seems unintended. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>