summaryrefslogtreecommitdiff
path: root/drivers/pcmcia
AgeCommit message (Collapse)Author
2012-05-07pcmcia: add driver for hx4700Paul Parsons
This patch adds support for the HP iPAQ hx4700 to the existing pxa2xx-pcmcia driver. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmciaLinus Torvalds
Pull a few PCMCIA updates from Dominik Brodowski. Fix up trivial conflict (modified code in question had been removed) in drivers/pcmcia/soc_common.c. * git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia: pcmcia at91_cf: fix raw gpio number usage ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe pcmcia: Convert to DEFINE_PCI_DEVICE_TABLE pcmcia: convert drivers/pcmcia/* to use module_platform_driver() pcmcia: irq: Remove IRQF_DISABLED
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-27Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM platform updates from Russell King: "This covers platform stuff for platforms I have a direct interest in (iow, I have the hardware). Essentially: - as we no longer support any other Acorn platforms other than RiscPC anymore, we can collect all that code into mach-rpc. - convert Acorn expansion card stuff to use IRQ allocation functions, and get rid of NO_IRQ from there. - cleanups to the ebsa110 platform to move some private stuff out of its header files. - large amount of SA11x0 updates: - conversion of private DMA implementation to DMA engine support (this actually gives us greater flexibility in drivers over the old API.) - re-worked ucb1x00 updates - convert to genirq, remove sa11x0 dependencies, fix various minor issues - move platform specific sa11x0 framebuffer data into platform files in arch/arm instead of keeping this in the driver itself - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA for SIR transmissions as well as FIR - rework sa1111 support for genirq, and irq allocation - fix sa1111 IRQ support so it works again - use sparse IRQ support After this, I have one more pull request remaining from my current set, which I think is going to be the most problematical as it generates 8 conflicts." Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per Russell. * 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits) ARM: 7343/1: sa11x0: convert to sparse IRQ ARM: 7342/2: sa1100: prepare for sparse irq conversion ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h ARM: sa11x0: remove unused DMA controller definitions ARM: sa11x0: remove old SoC private DMA driver USB: sa1111: add hcd .reset method USB: sa1111: add OHCI shutdown methods USB: sa1111: reorganize ohci-sa1111.c USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__) USB: sa1111: sparse and checkpatch cleanups ARM: sa11x0: don't static map sa1111 ARM: sa1111: use dev_err() rather than printk() ARM: sa1111: cleanup sub-device registration and unregistration ARM: sa1111: only setup DMA for DMA capable devices ARM: sa1111: register sa1111 devices with dmabounce in bus notifier ARM: sa1111: move USB interface register definitions to ohci-sa1111.c ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c ARM: sa1111: delete unused physical GPIO register definitions ...
2012-03-27Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: device tree work" from Arnd Bergmann: "Most of these patches convert code from using static platform data to describing the hardware in the device tree. This is only the first half of the changes for v3.4 because a lot of patches for this topic came in the last week before the merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h} * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board ARM: OMAP2+: Remove extra ifdefs for board-generic ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected ASoC: DT: Add digital microphone binding to PAZ00 board. ARM: dt: Add ARM PMU to tegra*.dtsi ARM: at91: at91sam9x5cm/dt: add leds support ARM: at91: usb_a9g20/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add leds support ARM: at91: usb_a9g20/dt: add leds support ARM: at91/pio: add new PIO3 features ARM: at91: add sam9_smc.o to at91sam9x5 build ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter ARM: at91/tc: add device tree support to atmel_tclib ...
2012-03-25Merge branch 'sa1111' into sa11x0Russell King
Conflicts: arch/arm/common/sa1111.c arch/arm/mach-sa1100/neponset.c Fixed: arch/arm/mach-sa1100/assabet.c for the neponset changes
2012-03-24ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.cRussell King
Move the PCMCIA interface register definitions into the driver, rather than keeping them in a common place. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-23Merge branch 'pcmcia' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull #3 ARM updates from Russell King: "This adds gpio support to soc_common, allowing an amount of code to be deleted from each PCMCIA socket driver for the PXA/SA11x0 SoCs." * 'pcmcia' of git://git.linaro.org/people/rmk/linux-arm: PCMCIA: sa1111: rename sa1111 socket drivers to have sa1111_ prefix. PCMCIA: make lubbock socket driver part of sa1111_cs PCMCIA: add Kconfig control for building sa11xx_base.c PCMCIA: sa1111: jornada720: no need to disable IRQs around sa1111_set_io PCMCIA: sa1111: pass along sa1111_pcmcia_configure_socket() failure code PCMCIA: soc_common: remove explicit wrprot initialization in socket drivers PCMCIA: soc_common: remove soc_pcmcia_*_irqs functions PCMCIA: sa11x0: h3600: convert to use new irq/gpio management PCMCIA: sa11x0: simpad: convert to use new irq/gpio management PCMCIA: sa11x0: shannon: convert to use new irq/gpio management PCMCIA: sa11x0: nanoengine: convert reset handling to use GPIO subsystem PCMCIA: sa11x0: nanoengine: convert to use new irq/gpio management PCMCIA: sa11x0: cerf: convert reset handling to use GPIO subsystem PCMCIA: sa11x0: cerf: convert to use new irq/gpio management PCMCIA: sa11x0: assabet: convert to use new irq/gpio management PCMCIA: sa1111: use new per-socket irq/gpio infrastructure PCMCIA: pxa: convert PXA socket drivers to use new irq/gpio management PCMCIA: soc_common: add GPIO support for card status signals PCMCIA: soc_common: move common initialization into soc_common
2012-03-23Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...
2012-03-09Merge 3.3-rc6 into driver-core-nextGreg Kroah-Hartman
This was done to resolve a conflict in the drivers/base/cpu.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08Merge branch 'dt' of git://github.com/hzhuang1/linux into next/dtOlof Johansson
* 'dt' of git://github.com/hzhuang1/linux: (6 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support (plus update to v3.3-rc6)
2012-03-03pcmcia at91_cf: fix raw gpio number usageJoachim Eastwood
This patches fixes two things: * Use gpio_valid function to check gpio before usage This must be done after 63b4c29678500 which uses -EINVAL for unused pin's * Use gpio_to_irq to convert gpio's to irq The driver assumed a 1:1 mapping between gpio and irq numbers. This is no longer true after d0fbda9add3281. Tested on custom RM9200 board with 8gb CF card. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probeAxel Lin
If pxa2xx_drv_pcmcia_add_one fails, it will go to err1 error path. Add a missing clk_put in the error path. Checking the ret value after the for loop is redundant, it is always false. Thus remove the redundant checking. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03pcmcia: Convert to DEFINE_PCI_DEVICE_TABLEAxel Lin
Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE tables. Also convert to use PCI_DEVICE macro for better readablity. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03pcmcia: convert drivers/pcmcia/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/pcmcia/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Marc Zyngier <maz@misterjones.org> [for the viper part] Acked-by: Manuel Lauss <manuel.lauss@googlemail.com> [for the db1xxx_ss.c part] Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03pcmcia: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-02-29Merge branch 'at91-3.4-base2+cleanup' of ↵Arnd Bergmann
git://github.com/at91linux/linux-at91 into at91/staging/base2+cleanup * 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91: (20 commits) ARM: at91: properly sort dtb files in Makefile.boot ARM: at91: add at91sam9g25ek.dts in Makefile.boot ARM: at91/board-dt: drop default console Atmel: move console default platform_device to serial driver ARM: at91: merge SRAM Memory banks thanks to mirroring ARM: at91: finally drop at91_sys_read/write ARM: at91/rtc-at91sam9: pass the GPBR to use via resources ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use ARM: at91/PMC: make register base soc independent ARM: at91/PMC: move assignment out of printf ARM: at91/pm_slowclock: add runtime detection of memory contoller ARM: at91: make sdram/ddr register base soc independent ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h ARM: at91/pm_slowclock: function slow_clock() accepts parameters ARM: at91/pm_slowclock: rename register to named define ARM: at91/ST: remove not needed casts ARM: at91: make ST (System Timer) soc independent ARM: at91: make matrix register base soc independent ARM: at91/at91x40: remove use of at91_sys_read/write Based on top of the at91/9x5, rmk/for-armsoc, at91/device-board, at91/pm_cleanup and at91/base. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-27PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridgeYinghai Lu
The old pci_remove_behind_bridge actually do stop and remove. Make the name reflect that to reduce confusion. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23ARM: at91: make sdram/ddr register base soc independentJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-21PCMCIA: sa1111: rename sa1111 socket drivers to have sa1111_ prefix.Russell King
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: make lubbock socket driver part of sa1111_csRussell King
Lubbock is just another SA1111 socket driver, so now that Kconfig has better control of which files get built, we can sanitize the build for this. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: add Kconfig control for building sa11xx_base.cRussell King
sa11xx_base.c is currently built when either PCMCIA_SA1100 or PCMCIA_SA1111 are selected. Let's move the logic into Kconfig. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: sa1111: jornada720: no need to disable IRQs around sa1111_set_ioRussell King
sa1111_set_io() already contains the necessary locking within itself to safely change the state of a set of GPIOs. There's no need for callers to protect this by disabling IRQs themselves. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: sa1111: pass along sa1111_pcmcia_configure_socket() failure codeRussell King
Pass along the sa1111_pcmcia_configure_socket() failure code to higher levels, rather than just returning zero. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: soc_common: remove explicit wrprot initialization in socket driversRussell King
soc_common already initializes state.wrprot to zero, so explicitly setting wrprot to zero in the socket drivers has no additional effect. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: soc_common: remove soc_pcmcia_*_irqs functionsRussell King
Now that we use gpios and gpio_to_irq() etc to manage the various card status signals within soc_common, and all socket drivers are converted, these functions are no longer used. We can now get rid of these helper functions. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: sa11x0: h3600: convert to use new irq/gpio managementRussell King
Convert iPAQ socket driver to use the new irq/gpio management. As this already uses the GPIO subsystem, these changes are localized to just the PCMCIA directory. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: sa11x0: simpad: convert to use new irq/gpio managementRussell King
Convert Simpad socket driver to use the new irq/gpio management. This is slightly more involved because we have to touch the private platform header file to modify the GPIO bitmasks to be GPIO numbers. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: sa11x0: shannon: convert to use new irq/gpio managementRussell King
Convert Shannon socket driver to use the new irq/gpio management. This is slightly more involved because we have to touch the private platform header file to modify the GPIO bitmasks to be GPIO numbers. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-16ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probeAxel Lin
If pxa2xx_drv_pcmcia_add_one fails, it will go to err1 error path. Add a missing clk_put in the error path. Checking the ret value after the for loop is redundant, it is always false. Thus remove the redundant checking. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-02-09ARM: sa1111: add platform enable/disable functionsRussell King
Add platform hooks to be called when individual sa1111 devices are enabled and disabled. This will allow us to move some platform specifics out of the individual drivers. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09ARM: sa11x0: neponset: provide function to manipulate NCR_0Russell King
Rather than having direct register accesses to NCR_0 scattered amongst the code, provide a function instead. This contains the necessary race protection for this platform, ensuring that updates to this register are safe. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-08pcmcia: fix socket refcount decrementing on each resumeRussell King
This fixes a memory-corrupting bug: not only does it cause the warning, but as a result of dropping the refcount to zero, it causes the pcmcia_socket0 device structure to be freed while it still has references, causing slab caches corruption. A fatal oops quickly follows this warning - often even just a 'dmesg' following the warning causes the kernel to oops. While testing suspend/resume on an ARM device with PCMCIA support, and a CF card inserted, I found that after five suspend and resumes, the kernel would complain, and shortly die after with slab corruption. WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() As the message doesn't give a clue about which kobject, and the built-in debugging in drivers/base/power/main.c happens too late, this was added right before each get_device(): printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount)); and on the 3rd s2ram cycle, the following behaviour observed: On the 3rd suspend/resume cycle: dpm_prepare: c1a0d998 [pcmcia_socket0] 3 dpm_suspend: c1a0d998 [pcmcia_socket0] 3 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume: c1a0d998 [pcmcia_socket0] 3 dpm_complete: c1a0d998 [pcmcia_socket0] 2 4th: dpm_prepare: c1a0d998 [pcmcia_socket0] 2 dpm_suspend: c1a0d998 [pcmcia_socket0] 2 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume: c1a0d998 [pcmcia_socket0] 2 dpm_complete: c1a0d998 [pcmcia_socket0] 1 5th: dpm_prepare: c1a0d998 [pcmcia_socket0] 1 dpm_suspend: c1a0d998 [pcmcia_socket0] 1 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume: c1a0d998 [pcmcia_socket0] 1 dpm_complete: c1a0d998 [pcmcia_socket0] 0 ------------[ cut here ]------------ WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() Modules linked in: ucb1x00_core Backtrace: [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c) [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68) [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28) [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50) [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24) [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20) ... Looking at commit 7b24e7988263 ("pcmcia: split up central event handler"), the following change was made to cs.c: return 0; } #endif - - send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW); + if (!(skt->state & SOCKET_CARDBUS) && (skt->callback)) + skt->callback->early_resume(skt); return 0; } And the corresponding change in ds.c is from: -static int ds_event(struct pcmcia_socket *skt, event_t event, int priority) -{ - struct pcmcia_socket *s = pcmcia_get_socket(skt); ... - switch (event) { ... - case CS_EVENT_PM_RESUME: - if (verify_cis_cache(skt) != 0) { - dev_dbg(&skt->dev, "cis mismatch - different card\n"); - /* first, remove the card */ - ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH); - mutex_lock(&s->ops_mutex); - destroy_cis_cache(skt); - kfree(skt->fake_cis); - skt->fake_cis = NULL; - s->functions = 0; - mutex_unlock(&s->ops_mutex); - /* now, add the new card */ - ds_event(skt, CS_EVENT_CARD_INSERTION, - CS_EVENT_PRI_LOW); - } - break; ... - } - pcmcia_put_socket(s); - return 0; -} /* ds_event */ to: +static int pcmcia_bus_early_resume(struct pcmcia_socket *skt) +{ + if (!verify_cis_cache(skt)) { + pcmcia_put_socket(skt); + return 0; + } + dev_dbg(&skt->dev, "cis mismatch - different card\n"); + /* first, remove the card */ + pcmcia_bus_remove(skt); + mutex_lock(&skt->ops_mutex); + destroy_cis_cache(skt); + kfree(skt->fake_cis); + skt->fake_cis = NULL; + skt->functions = 0; + mutex_unlock(&skt->ops_mutex); + /* now, add the new card */ + pcmcia_bus_add(skt); + return 0; +} As can be seen, the original function called pcmcia_get_socket() and pcmcia_put_socket() around the guts, whereas the replacement code calls pcmcia_put_socket() only in one path. This creates an imbalance in the refcounting. Testing with pcmcia_put_socket() put removed shows that the bug is gone: dpm_suspend: c1a10998 [pcmcia_socket0] 5 dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume: c1a10998 [pcmcia_socket0] 5 dpm_complete: c1a10998 [pcmcia_socket0] 5 Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-04PCMCIA: sa11x0: nanoengine: convert reset handling to use GPIO subsystemRussell King
Rather than accessing GPSR and GPCR directly, use the GPIO subsystem instead. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04PCMCIA: sa11x0: nanoengine: convert to use new irq/gpio managementRussell King
Convert Nanoengine socket driver to use the new irq/gpio management. This is slightly more involved because we have to touch the private platform header file to modify the GPIO bitmasks to be GPIO numbers. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04PCMCIA: sa11x0: cerf: convert reset handling to use GPIO subsystemRussell King
Rather than accessing GPSR and GPCR directly, use the GPIO subsystem instead. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04PCMCIA: sa11x0: cerf: convert to use new irq/gpio managementRussell King
Convert Cerf socket driver to use the new irq/gpio management. This is slightly more involved because we have to touch the private platform header file to modify the GPIO bitmasks to be GPIO numbers. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04PCMCIA: sa11x0: assabet: convert to use new irq/gpio managementRussell King
Convert Assabet socket driver to use the new irq/gpio management. This is slightly more involved because we have to touch the private platform header file to modify the GPIO bitmasks to be GPIO numbers. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04PCMCIA: sa1111: use new per-socket irq/gpio infrastructureRussell King
Convert sa1111 PCMCIA drivers to use the new per-socket irq/gpio infrastructure. As the core takes care of handling the IRQs, we can get rid of sa1111_pcmcia_socket_init(), sa1111_pcmcia_socket_suspend(), sa1111_pcmcia_hw_init() and sa1111_pcmcia_hw_shutdown(), as well as the private IRQ table. We remove the NCR_0 setting in Neponset, as this is duplicating what's already done via configure_socket in suspend. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04PCMCIA: pxa: convert PXA socket drivers to use new irq/gpio managementRussell King
Convert all the PXA platform socket drivers to use the new irq/gpio management provided by soc_common. This relieves these drivers from having to do anything with these GPIOs other than provide the numbers to soc_common. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02Merge 3.3-rc2 into the driver-core-next branch.Greg Kroah-Hartman
This was done to resolve a merge and build problem with the drivers/acpi/processor_driver.c file. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-26USB/PCI/PCMCIA: Clean up new_id and remove_id sysfs attribute routinesAlan Stern
This patch (as1514) cleans up some places where new_id and remove_id sysfs attributes are created and deleted. Handling both attributes in a single routine rather than a pair of routines makes the code smaller. It also prevents certain kinds of errors, like one we currently have in the USB subsystem: The removeid attribute is often created even when newid isn't (because the driver's no_dynamid_id flag is set). In the case of the PCMCIA subsystem, the newid attribute is created but never explicitly deleted. The patch adds a deletion routine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26PCMCIA: soc_common: add GPIO support for card status signalsRussell King
Add GPIO support for reading the card status (card detect, ready, battery voltage detect) signals into soc_common code. As we want interrupts from these GPIOs, this takes over the old irq handling infrastructure for card status signals, which will now be managed entirely by the soc_common code. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-26PCMCIA: soc_common: move common initialization into soc_commonRussell King
Move common socket initialization into soc_common.c. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-24Dynamic ID addition doesn't need get_driver()Alan Stern
As part of the removal of get_driver()/put_driver(), this patch (as1511) changes all the places that add dynamic IDs for drivers. Since these additions are done by writing to the drivers' sysfs attribute files, and the attributes are removed when the drivers are unregistered, there is no reason to take an extra reference to the drivers. The one exception is the pci-stub driver, which calls pci_add_dynid() as part of its registration. But again, there's no reason to take an extra reference here, because the driver can't be unloaded while it is being registered. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Jiri Kosina <jkosina@suse.cz> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24PCMCIA: fix sa1111 oops on removeRussell King
The sa1111 socket driver oopses when removed: Unable to handle kernel NULL pointer dereference at virtual address 000003b0 pgd = c1b40000 [000003b0] *pgd=00000000 Internal error: Oops: 41b43005 [#1] Modules linked in: CPU: 0 Not tainted (3.3.0-rc1+ #744) PC is at pcmcia_remove+0x3c/0x60 LR is at pcmcia_remove+0x34/0x60 This is because we try to dereference a NULL 's' to obtain the next pointer. Fix this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits) MIPS: Delete unused function add_temporary_entry. MIPS: Set default pci cache line size. MIPS: Flush huge TLB MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM. MIPS: Octeon: Add support for OCTEON II PCIe MIPS: Octeon: Update PCI Latency timer and enable more error reporting. MIPS: Alchemy: Update cpu-feature-overrides MIPS: Alchemy: db1200: Improve PB1200 detection. MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code. MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller MIPS: Alchemy: irq: register pm at irq init time MIPS: Alchemy: Touchscreen support on DB1100 MIPS: Alchemy: Hook up IrDA on DB1000/DB1100 net/irda: convert au1k_ir to platform driver. MIPS: Alchemy: remove unused board headers MTD: nand: make au1550nd.c a platform_driver MIPS: Netlogic: Mark Netlogic chips as SMT capable MIPS: Netlogic: Add support for XLP 3XX cores MIPS: Netlogic: Merge some of XLR/XLP wakup code MIPS: Netlogic: Add default XLP config. ... Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c, traps.c} and drivers/tty/serial/Makefile
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-12-28pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()Axel Lin
Since commit 6384fd "ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ", I got buid errors due to implicit declaration of function 'IRQ_GPIO'. Use common gpio_to_irq() to replace machine dependant macro IRQ_GPIO(). Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Ian Molton <spyro@f2s.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Zhuang <haojian.zhuang@marvell.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>