summaryrefslogtreecommitdiff
path: root/drivers/phy/qualcomm
AgeCommit message (Collapse)Author
2023-10-23phy: qcom-qmp-pcie: add endpoint support for sa8775pMrinmay Sarkar
Add support for dual lane end point mode PHY found on sa8755p platform. Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1697715430-30820-4-git-send-email-quic_msarkar@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-13phy: qcom-qmp-combo: use v6 registers in v6 regs layoutDmitry Baryshkov
Make sure that we use only v6 registers in qmp_v6_usb3phy_regs_layout. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928105445.1210861-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-13phy: qcom-qmp-usb: move PCS v6 register to the proper headerDmitry Baryshkov
The commit 39bbf82d8c2b ("phy: qcom-qmp: pcs-usb: Add v6 register offsets") incorrectly added plain PCS registers to the PCS_USB header. Move them to a proper location. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928105445.1210861-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-13phy: qcom-qmp-combo: fix the prefix for the PCS_USB v6 registersDmitry Baryshkov
For all other generations, we have been using just the QPHY prefix for the PCS registers. Remove the _USB part of the QPHY_USB prefix. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928105445.1210861-2-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-13Merge branch 'fixes' into nextVinod Koul
Merge fixes into next as qmp phy patches on list depend on it
2023-09-21phy: qualcomm: phy-qcom-eusb2-repeater: Add tuning overridesKonrad Dybcio
There are devices in the wild, like the Sony Xperia 1 V that *require* different tuning than the base design for USB to work. Add support for overriding the necessary tuning values. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-4-7d8c893d93f6@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regsKonrad Dybcio
The vendor kernel zeroes out all tuning data outside the init sequence as part of initialization. Follow suit to avoid UB. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-3-7d8c893d93f6@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qualcomm: phy-qcom-eusb2-repeater: Use regmap_fieldsKonrad Dybcio
Switch to regmap_fields, so that the values written into registers are sanitized by their explicit sizes and the different registers are structured in an iterable object to make external changes to the init sequence simpler. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-2-7d8c893d93f6@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-m31: Add compatible, phy init sequence for IPQ5018Nitheesh Sekar
Add phy init sequence and compatible string for IPQ5018 chipset. Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> Link: https://lore.kernel.org/r/20230904063635.24975-3-quic_nsekar@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qualcomm: Fix typos in commentsBo Liu
Fix typo in the description of the 'succesfully'. Signed-off-by: Bo Liu <liubo03@inspur.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230912114646.8452-1-liubo03@inspur.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-combo: initialize PCS_USB registersKonrad Dybcio
Currently, PCS_USB registers that have their initialization data in a pcs_usb_tbl table are never initialized. Fix that. Fixes: fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") Reported-by: Adrien Thierry <athierry@redhat.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230829-topic-8550_usbphy-v3-2-34ec434194c5@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1Konrad Dybcio
There are two instances of the POWER_STATE_CONFIG1 register: one in the PCS space and another one in PCS_USB. The downstream init sequence pokes the latter one while we've been poking the former one (and misnamed it as the latter one, impostor!). Fix that up to avoid UB. Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550") Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230829-topic-8550_usbphy-v3-1-34ec434194c5@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom: m31: Remove unwanted qphy->vreg is NULL checkVaradarajan Narayanan
Fix the following Smatch complaint: drivers/phy/qualcomm/phy-qcom-m31.c:175 m31usb_phy_init() warn: variable dereferenced before check 'qphy->vreg' (see line 167) drivers/phy/qualcomm/phy-qcom-m31.c 166 167 ret = regulator_enable(qphy->vreg); ^^^^^^^^^^ Unchecked dereference 168 if (ret) { 169 dev_err(&phy->dev, "failed to enable regulator, %d\n", ret); 170 return ret; 171 } 172 173 ret = clk_prepare_enable(qphy->clk); 174 if (ret) { 175 if (qphy->vreg) ^^^^^^^^^^ Checked too late 176 regulator_disable(qphy->vreg); 177 dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); Since the phy will not get registered if qphy->vreg is NULL, this check is not needed. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-phy/cbd26132-c624-44b7-a073-73222b287338@moroto.mountain/T/#u Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver") Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/1694069452-3794-1-git-send-email-quic_varada@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to staticYang Yingliang
m31_ipq5332_regs is only used in phy-qcom-m31.c now, change it to static. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20230824092356.1154839-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()Yang Yingliang
It should be 'qphy->vreg' passed to PTR_ERR() when devm_regulator_get() fails. Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20230824091345.1072650-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-usb: populate offsets configurationDmitry Baryshkov
Populate offsets configuration for the rest of USB PHYs to make it possible to switch them to the new (single-node) bindings style. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230824211952.1397699-7-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp: move PCS MISC V4 registers to separate headerDmitry Baryshkov
Move PCS MISC V4 registers to the separate header. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230824211952.1397699-6-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-usb: make QPHY_PCS_MISC_CLAMP_ENABLE access conditionalDmitry Baryshkov
The register QPHY_V[34]_PCS_MISC_CLAMP_ENABLE is present only on some SoC families. Other platforms (qcm2290) can have PCS_MISC region, but do not have this register. Add it to the register layout table and check that it is defined before toggling CLAMP settings. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230824211952.1397699-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-usb: rework reset handlingDmitry Baryshkov
All legacy bindings of USB PHYs use "phy", "common" resets, while newer style bindings use "phy", "phy_phy" resets. In preparation for converting existing legacy PHY bindings to use newer scheme, drop reset lists from configuration struture and reference reset lists directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230824211952.1397699-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-usb: simplify clock handlingDmitry Baryshkov
For the existing PHYs for new binding we are going to drop ref_clk_src clock and always use ref clock. Rather than introducing additional code to handle legacy vs current bindings (and clock names), use devm_clk_bulk_get_optional() when new bindings are used and devm_clk_bulk_get_all() when legacy bindings are in place. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230824211952.1397699-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775pAdrien Thierry
For sc8280xp and sa8775p, PCS and PCS_USB initialization data is described in the same table, thus the pcs_usb offset is not being applied during initialization of PCS_USB registers. Fix this by adding the appropriate pcs_usb_tbl tables. Fixes: 8bd2d6e11c99 ("phy: qcom-qmp: Add SA8775P USB3 UNI phy") Fixes: c0c7769cdae2 ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Adrien Thierry <athierry@redhat.com> Link: https://lore.kernel.org/r/20230828152353.16529-3-athierry@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-usb: initialize PCS_USB registersAdrien Thierry
Currently, PCS_USB registers that have their initialization data in a pcs_usb_tbl table are never initialized. Fix that. Fixes: fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") Signed-off-by: Adrien Thierry <athierry@redhat.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230828152353.16529-2-athierry@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280Nitin Rawat
Add SC7280 specific register layout and table configs. Co-developed-by: Manish Pandey <quic_mapa@quicinc.com> Signed-off-by: Manish Pandey <quic_mapa@quicinc.com> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230918205037.25658-3-quic_nitirawa@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom: m31: Fix indentation issuesVaradarajan Narayanan
Fix incorrect indentation Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/7ca6fa68ba33742fcf65147c038c1102cc4901b4.1693468292.git.quic_varada@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-03Merge tag 'phy-for-6.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "As usual a couple of new drivers, a bunch of new device support and few updates to existing drivers New Support: - Starfive dphy rx, JH7110 usb and pcie support - Rockchip rv1126 inno-dsi phy, rk3588 usb and pcie support - Qualcomm sa8775p PCIe support, M31 USB PHY driver - Samsung Exynos850 usb support Updates: - Mediatek dsi driver clock updates - Qualcomm sm8150 combo phy with reworking of qmp pcie driver - Xilinx zynqmp runtime PM support" * tag 'phy-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (83 commits) phy: exynos5-usbdrd: Add Exynos850 support phy: exynos5-usbdrd: Add 26MHz ref clk support phy: exynos5-usbdrd: Make it possible to pass custom phy ops dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support phy: qcom-qmp-combo: fix clock probing phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs phy: qcom-qmp-pcie: populate offsets configuration phy: qcom-qmp-pcie: simplify clock handling phy: qcom-qmp-pcie: keep offset tables sorted phy: qcom-qmp-pcie: drop ln_shrd from v5_20 config dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed phy: qcom: Introduce M31 USB PHY driver dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy phy: rockchip: inno-dsidphy: Add rv1126 support dt-bindings: phy: rockchip-inno-dsidphy: Document rv1126 dt-bindings: phy: mediatek,tphy: allow simple nodename pattern phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warning ...
2023-08-30Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "This pull request is full of clk driver changes. In fact, there aren't any changes to the clk framework this time around. That's probably because everyone was on vacation (yours truly included). We did lose a couple clk drivers this time around because nobody was using those devices. That skews the diffstat a bit, but either way, nothing looks out of the ordinary here. The usual suspects are chugging along adding support for more SoCs and fixing bugs. If I had to choose, I'd say the theme for the past few months has been "polish". There's quite a few patches that migrate to devm_platform_ioremap_resource() in here. And there's more than a handful of patches that move the NR_CLKS define from the DT binding header to the driver. There's even patches that migrate drivers to use clk_parent_data and clk_hw to describe clk tree topology. It seems that the spring (summer?) cleaning bug got some folks, or the semiconductor shortage finally hit the software side. New Drivers: - StarFive JH7110 SoC clock drivers - Qualcomm IPQ5018 Global Clock Controller driver - Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK Removed Drivers: - Remove non-OF mmp clk drivers - Remove OXNAS clk driver Updates: - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers - Introduce kstrdup_and_replace() and use it - Add PLL rates for Rockchip rk3568 - Add the display clock tree for Rockchip rv1126 - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource() - Fix function name in a comment in ccu_mmc_timing.c - Parameter name correction for ccu_nkm_round_rate() - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative parent rates when determining clock rates - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi - Support finding closest (as opposed to closest but not higher) clock rate for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0 - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to the interconnect drivers - Fix various PM runtime bugs across many Qualcomm clk drivers - Migrate Qualcomm MDM9615 is to parent_hw and parent_data - Add network related resets on Qualcomm IPQ4019 - Add a couple missing USB related clocks to Qualcomm IPQ9574 - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are corrected - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver - Support retention for the Qualcomm SC8280XP display clock controller GDSCs. - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while sm8450 is corrected to use floor ops - Correct Qualcomm SM6350 GPU clock controller's clock supplies - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC - Change the delay in the Qualcomm reset controller to fsleep() for correctness - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3, M3-W, and M3-N SoCs - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five - Add the PDM IPC clock for i.MX93 - Add 519.75MHz frequency support for i.MX9 PLL - Simplify the .determine_rate() implementation for i.MX GPR mux - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource() - Add the audio mux clock to i.MX8 - Fix the SPLL2 MULT range for PLLv4 - Update the SPLL2 type in i.MX8ULP - Fix the SAI4 clock on i.MX8MP - Add silicon revision print for i.MX25 on clocks init - Drop the return value from __mx25_clocks_init() - Fix the clock pauses on no-op set_rate for i.MX8M composite clock - Drop restrictions for i.MX PLL14xx and fix its max prediv value - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow glitch free switching" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits) clk: qcom: Fix SM_GPUCC_8450 dependencies clk: lmk04832: Support using PLL1_LD as SPI readback pin clk: lmk04832: Don't disable vco clock on probe fail clk: lmk04832: Set missing parent_names for output clocks clk: mvebu: Convert to devm_platform_ioremap_resource() clk: nuvoton: Convert to devm_platform_ioremap_resource() clk: socfpga: agilex: Convert to devm_platform_ioremap_resource() clk: ti: Use devm_platform_get_and_ioremap_resource() clk: mediatek: Convert to devm_platform_ioremap_resource() clk: hsdk-pll: Convert to devm_platform_ioremap_resource() clk: gemini: Convert to devm_platform_ioremap_resource() clk: fsl-sai: Convert to devm_platform_ioremap_resource() clk: bm1880: Convert to devm_platform_ioremap_resource() clk: axm5516: Convert to devm_platform_ioremap_resource() clk: actions: Convert to devm_platform_ioremap_resource() clk: cdce925: Remove redundant of_match_ptr() clk: pxa910: Move number of clocks to driver source clk: pxa1928: Move number of clocks to driver source clk: pxa168: Move number of clocks to driver source clk: mmp2: Move number of clocks to driver source ...
2023-08-22clk: Annotate struct clk_hw_onecell_data with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct clk_hw_onecell_data. Additionally, since the element count member must be set before accessing the annotated flexible array member, move its initialization earlier. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Taichi Sugaya <sugaya.taichi@socionext.com> Cc: Takao Orito <orito.takao@socionext.com> Cc: Qin Jian <qinjian@cqplus1.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Samuel Holland <samuel@sholland.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: dri-devel@lists.freedesktop.org Cc: linux-sunxi@lists.linux.dev Cc: linux-phy@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230817203019.never.795-kees@kernel.org Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-22phy: qcom-qmp-combo: fix clock probingDmitry Baryshkov
During rebase of qcom-qmp-combo series a call to devm_clk_bulk_get_all() got moved by git from qmp_combo_parse_dt_legacy() to phy_dp_clks_register(). This doesn't have any serious effect, since the clocks will be set in both legacy and non-legacy paths. However let's move it back to place anyway, to prevent the driver from fetching clocks twice. Fixes: 28e265bf84a8 ("phy: qcom-qmp-combo: simplify clock handling") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820235813.562284-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYsDmitry Baryshkov
Reuse sm8250 configuration to add support for both single lane and dual lane PCIe PHYs on the Qualcomm SM8150 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-8-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom-qmp-pcie: populate offsets configurationDmitry Baryshkov
Populate offsets configuration for the rest of UFS PHYs to make it possible to switch them to the new (single-node) bindings style. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-7-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom-qmp-pcie: simplify clock handlingDmitry Baryshkov
For some of existing PHYs for new binding we are going to change refgen to more correct "rchng". Rather than introducing additional code to handle legacy vs current bindings (and clock names), use devm_clk_bulk_get_optional(). Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-6-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom-qmp-pcie: keep offset tables sortedDmitry Baryshkov
In order to simplify adding new PHY configurations, keep register offset structs sorted by the version. Fixes: a05b6d5135ec ("phy: qcom-qmp-pcie: add support for sa8775p") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom-qmp-pcie: drop ln_shrd from v5_20 configDmitry Baryshkov
There is no shared lane config for v5.20 PHYs, it is only present on SM8550 gen4x2. Fixes: a05b6d5135ec ("phy: qcom-qmp-pcie: add support for sa8775p") Cc: Mrinmay Sarkar <quic_msarkar@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom: Introduce M31 USB PHY driverVaradarajan Narayanan
Add the M31 USB2 phy driver for the USB M31 PHY (https://www.m31tech.com) found in Qualcomm IPQ5018, IPQ5332 SoCs. Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/c8821bb0124a54cc774a2ff7b9c40df28eb7711e.1691999761.git.quic_varada@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11phy: qcom: qmp-ufs: add missing offsets to sm8150 configurationDmitry Baryshkov
The conversion commit 7559e7572c03 ("phy: Explicitly include correct DT includes") misses offsets configuration for sm8150 (most likely it was developed separately from the series adding HS G4 support and was not adapted for the sm8150/sm8250 configuration split). Add missing offsets to sm8150_ufsphy_cfg. Fixes: 7559e7572c03 ("phy: Explicitly include correct DT includes") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230731111009.3998089-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-24phy: qcom-qmp-combo: add qcom,sc7280-qmp-usb3-dp-phy compat entryDmitry Baryshkov
Add separate device entry for Combo USB+DP QMP PHY on sc7280 platform. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230711120916.4165894-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-24phy: qcom-qmp-combo: populate offsets for all combo PHYsDmitry Baryshkov
In order to support newer style bindings for combo PHYs, populate offsets for all Combo QMP PHY configurations. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230711120916.4165894-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-24phy: qcom-qmp-combo: simplify clock handlingDmitry Baryshkov
For the existing PHYs for new binding we are going to drop ref_clk_src clock and always use ref clock. Rather than introducing additional code to handle legacy vs current bindings (and clock names), use devm_clk_bulk_get_optional() when new bindings are used and devm_clk_bulk_get_all() when legacy bindings are in place. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230711120916.4165894-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-18phy: qcom-qmp-pcie: add support for sa8775pMrinmay Sarkar
Add support for dual and four lane PHY found on sa8755p platform. Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com> Link: https://lore.kernel.org/r/1689311319-22054-5-git-send-email-quic_msarkar@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-17phy: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/phy/phy-can-transceiver.c Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20230714174841.4061919-1-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom-qmp-ufs: populate offsets configurationDmitry Baryshkov
Populate offsets configuration for the rest of UFS PHYs to make it possible to switch them to the new (single-node) bindings style. Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230711145153.4167820-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom: qmp-combo: extract common function to setup clocksDmitry Baryshkov
Extact qmp_combo_configure_dp_clocks(), a common function to setup PHY clocks depending on the selected link rate. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230621153317.1025914-8-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom: qmp-combo: drop qmp_v6_dp_aux_init()Dmitry Baryshkov
The only difference between qmp_v6_dp_aux_init() and qmp_v4_dp_aux_init() is the address of COM_BIAS_EN_CLKBUFLR_EN register. Move it to register layout and drop the duplicate function. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230621153317.1025914-7-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom: qmp-combo: drop similar functionsDmitry Baryshkov
The functions qmp_v5_configure_dp_phy() and qmp_v6_configure_dp_phy() are now copies of qmp_v4_configure_dp_phy(). Drop them and use the v4 function in all the cases. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230621153317.1025914-6-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom: qmp-combo: reuse register layouts for some more registersDmitry Baryshkov
Use register layout for TX_HIGHZ_DRVR_EN and TX_TRANSCEIVER_BIAS_EN registers. This will allow us to unify qmp_v[456]_configure_dp_phy() functions in the next commit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230621153317.1025914-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom: qmp-combo: reuse register layouts for even more registersDmitry Baryshkov
Instead of passing additional registers to qmp_combo_configure_dp_swing(), reuse qphy_reg_layout and add those registers to register layout maps. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230621153317.1025914-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom: qmp-combo: reuse register layouts for more registersDmitry Baryshkov
Instead of passing additional registers to qmp_v456_configure_dp_phy(), reuse qphy_reg_layout and add those registers to register layout maps. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230621153317.1025914-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom: qmp-combo: correct bias0_en programmingDmitry Baryshkov
It seems the commit a2e927b0e50d ("phy: qcom-qmp-combo: Add sc8280xp USB/DP combo phys") contained a typo for selecting bias0_en values. First, bias0_en and bias1_en are expected to be symmetrical, and then the vendor driver also uses `flipped : 0x3E : 0x15` statement for bias0_en. Correct bias0_en programming to follow this. Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550") Fixes: a2e927b0e50d ("phy: qcom-qmp-combo: Add sc8280xp USB/DP combo phys") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230621153317.1025914-2-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom-qmp-usb: split off the legacy USB+dp_com supportDmitry Baryshkov
When adding support for some of the platforms (sc7180, sc8180x, sdm845, sm8[1234]50), we added USB PHYs for the combo USB+DP QMP PHYs. Now all such usecases were migrated to use USB+DP Combo driver. To simplify the qcom-qmp-usb PHY driver split the legacy USB+dp_com support into a separate driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230531023415.1209301-6-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom-qmp-combo: add support for the USB+DP PHY on SM8150 platformDmitry Baryshkov
SM8150 and SC8180X are close relatives. Reuse sc8180x data to support USB+DP combo PHY on SM8150 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230531023415.1209301-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2026-02-02 20:13:58 +0000