summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)Author
2023-10-25phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pinsTony Lindgren
[ Upstream commit 3b384cc74b00b5ac21d18e4c1efc3c1da5300971 ] Looks like the driver sleep pins configuration is unusable. Adding the sleep pins causes the usb phy to not respond. We need to use the default pins in probe, and only set sleep pins at phy_mdm6600_device_power_off(). As the modem can also be booted to a serial port mode for firmware flashing, let's make the pin changes limited to probe and remove. For probe, we get the default pins automatically. We only need to set the sleep pins in phy_mdm6600_device_power_off() to prevent the modem from waking up because the gpio line glitches. If it turns out that we need a separate state for phy_mdm6600_power_on() and phy_mdm6600_power_off(), we can use the pinctrl idle state. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Fixes: 2ad2af081622 ("phy: mapphone-mdm6600: Improve phy related runtime PM calls") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230913060433.48373-3-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25phy: mapphone-mdm6600: Fix runtime PM for removeTony Lindgren
[ Upstream commit b99e0ba9633af51638e5ee1668da2e33620c134f ] Otherwise we will get an underflow on remove. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230913060433.48373-2-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25phy: mapphone-mdm6600: Fix runtime disable on probeTony Lindgren
[ Upstream commit 719606154c7033c068a5d4c1dc5f9163b814b3c8 ] Commit d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe") caused a regression where we now unconditionally disable runtime PM at the end of the probe while it is only needed on errors. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Fixes: d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230913060433.48373-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg writeJonas Karlman
[ Upstream commit 19a1d46bd699940a496d3b0d4e142ef99834988c ] inno_write is used to configure 0xaa reg, that also hold the POST_PLL_POWER_DOWN bit. When POST_PLL_REFCLK_SEL_TMDS is configured the power down bit is not taken into consideration. Fix this by keeping the power down bit until configuration is complete. Also reorder the reg write order for consistency. Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20230615171005.2251032-5-jonas@kwiboo.se Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rateZheng Yang
[ Upstream commit d5ef343c1d62bc4c4c2c393af654a41cb34b449f ] inno_hdmi_phy_rk3328_clk_recalc_rate() is returning a rate not found in the pre pll config table when the fractal divider is used. This can prevent proper power_on because a tmdsclock for the new rate is not found in the pre pll config table. Fix this by saving and returning a rounded pixel rate that exist in the pre pll config table. Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy") Signed-off-by: Zheng Yang <zhengyang@rock-chips.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20230615171005.2251032-3-jonas@kwiboo.se Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328Jonas Karlman
[ Upstream commit 644c06dfbd0da713f772abf0a8f8581ac78e6264 ] inno_hdmi_phy_rk3328_clk_set_rate() is using the RK3228 macro when configuring vco_div_5 on RK3328. Fix this by using correct vco_div_5 macro for RK3328. Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20230615171005.2251032-2-jonas@kwiboo.se Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()Harshit Mogalapalli
[ Upstream commit 13c088cf3657d70893d75cf116be937f1509cc0f ] The size of array 'priv->ports[]' is INNO_PHY_PORT_NUM. In the for loop, 'i' is used as the index for array 'priv->ports[]' with a check (i > INNO_PHY_PORT_NUM) which indicates that INNO_PHY_PORT_NUM is allowed value for 'i' in the same loop. This > comparison needs to be changed to >=, otherwise it potentially leads to an out of bounds write on the next iteration through the loop Fixes: ba8b0ee81fbb ("phy: add inno-usb2-phy driver for hi3798cv200 SoC") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20230721090558.3588613-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-30phy: st: miphy28lp: use _poll_timeout functions for waitsAlain Volmat
[ Upstream commit e3be4dd2c8d8aabfd2c3127d0e2e5754d3ae82d6 ] This commit introduces _poll_timeout functions usage instead of wait loops waiting for a status bit. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20230210224309.98452-1-avolmat@me.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ↵Gaosheng Cui
ulpi_port [ Upstream commit e024854048e733391b31fe5a398704b31b9af803 ] The tegra_xusb_port_unregister should be called when usb2_port and ulpi_port map fails in tegra_xusb_add_usb2_port() or in tegra_xusb_add_ulpi_port(), fix it. Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20221129111634.1547747-1-cuigaosheng1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11phy: rockchip-typec: Fix unsigned comparison with less than zeroJiapeng Chong
[ Upstream commit f765c59c5a72546a2d74a92ae5d0eb0329d8e247 ] The dp and ufp are defined as bool type, the return value type of function extcon_get_state should be int, so the type of dp and ufp are modified to int. ./drivers/phy/rockchip/phy-rockchip-typec.c:827:12-14: WARNING: Unsigned expression compared with zero: dp > 0. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3962 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20230213035709.99027-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-06phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in ↵Shang XiaoJing
rockchip_usb2phy_power_on() [ Upstream commit 5daba914da0e48950e9407ea4d75fa57029c9adc ] The clk_disable_unprepare() should be called in the error handling of rockchip_usb2phy_power_on(). Fixes: 0e08d2a727e6 ("phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221205115823.16957-1-shangxiaojing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25phy: stm32: fix an error code in probeDan Carpenter
[ Upstream commit ca1c73628f5bd0c1ef6e46073cc3be2450605b06 ] If "index > usbphyc->nphys" is true then this returns success but it should return -EINVAL. Fixes: 94c358da3a05 ("phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/Y0kq8j6S+5nDdMpr@kili Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26phy: qualcomm: call clk_disable_unprepare in the error handlingDongliang Mu
[ Upstream commit c3966ced8eb8dc53b6c8d7f97d32cc8a2107d83e ] Smatch reports the following error: drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on() warn: 'uphy->cal_clk' from clk_prepare_enable() not released on lines: 58. drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on() warn: 'uphy->cal_sleep_clk' from clk_prepare_enable() not released on lines: 58. drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on() warn: 'uphy->phy_clk' from clk_prepare_enable() not released on lines: 58. Fix this by calling proper clk_disable_unprepare calls. Fixes: 0b56e9a7e835 ("phy: Group vendor specific phy drivers") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20220914051334.69282-1-dzm91@hust.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14phy: qcom-qmp: fix pipe-clock imbalance on power-on failureJohan Hovold
[ Upstream commit 5e73b2d9867998278479ccc065a8a8227a5513ef ] Make sure to disable the pipe clock also if ufs-reset deassertion fails during power on. Note that the ufs-reset is asserted in qcom_qmp_phy_com_exit(). Fixes: c9b589791fc1 ("phy: qcom: Utilize UFS reset controller") Cc: Evan Green <evgreen@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220502133130.4125-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14phy: qcom-qmp: fix reset-controller leak on probe errorsJohan Hovold
commit 4d2900f20edfe541f75756a00deeb2ffe7c66bc1 upstream. Make sure to release the lane reset controller in case of a late probe error (e.g. probe deferral). Note that due to the reset controller being defined in devicetree in "lane" child nodes, devm_reset_control_get_exclusive() cannot be used directly. Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220427063243.32576-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14phy: qcom-qmp: fix struct clk leak on probe errorsJohan Hovold
commit f0a4bc38a12f5a0cc5ad68670d9480e91e6a94df upstream. Make sure to release the pipe clock reference in case of a late probe error (e.g. probe deferral). Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220427063243.32576-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09phy: ti: Add missing pm_runtime_disable() in serdes_am654_probeMiaoqian Lin
[ Upstream commit ce88613e5bd579478653a028291098143f2a5bdf ] The pm_runtime_enable() will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Add missing pm_runtime_disable() for serdes_am654_probe(). Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probeMiaoqian Lin
[ Upstream commit d644e0d79829b1b9a14beedbdb0dc1256fc3677d ] The pm_runtime_enable will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to undo pm_runtime_use_autosuspend() In the PM Runtime docs: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. We should do this in error handling. Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocksMiaoqian Lin
[ Upstream commit 3588060befff75ff39fab7122b94c6fb3148fcda ] The corresponding API for clk_prepare_enable is clk_disable_unprepare. Make sure that the clock is unprepared on exit by changing clk_disable to clk_disable_unprepare. Fixes: ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09phy: samsung: exynos5250-sata: fix missing device put in probe error pathsKrzysztof Kozlowski
[ Upstream commit 5c8402c4db45dd55c2c93c8d730f5dfa7c78a702 ] The actions of of_find_i2c_device_by_node() in probe function should be reversed in error paths by putting the reference to obtained device. Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probeMiaoqian Lin
[ Upstream commit 388ec8f079f2f20d5cd183c3bc6f33cbc3ffd3ef ] The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220407091857.230386-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure})Liu Ying
[ Upstream commit 3153fa38e38af566cf6454a03b1dbadaf6f323c0 ] According to the comment of the function phy_mipi_dphy_get_default_config(), it uses minimum D-PHY timings based on MIPI D-PHY specification. They are derived from the valid ranges specified in Section 6.9, Table 14, Page 41 of the D-PHY specification (v1.2). The table 14 explicitly mentions that the minimum T-LPX parameter is 50 nanoseconds and the minimum TA-SURE parameter is T-LPX nanoseconds. Likewise, the kernel doc of the 'lpx' and 'ta_sure' members of struct phy_configure_opts_mipi_dphy mentions that the minimum values are 50000 picoseconds and @lpx picoseconds respectively. Also, the function phy_mipi_dphy_config_validate() checks if cfg->lpx is less than 50000 picoseconds and if cfg->ta_sure is less than cfg->lpx, which hints the same minimum values. Without this patch, the function phy_mipi_dphy_get_default_config() wrongly sets cfg->lpx to 60000 picoseconds and cfg->ta_sure to 2 * cfg->lpx. So, let's correct them to 50000 picoseconds and cfg->lpx respectively. Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK. Help is needed to test with other i.MX8mq, Meson and Rockchip platforms, as I don't have the hardwares. Fixes: dddc97e82303 ("phy: dphy: Add configuration helpers") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Maxime Ripard <mripard@kernel.org> Cc: Guido Günther <agx@sigxcpu.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20220216071257.1647703-1-victor.liu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27phy: uniphier-usb3ss: fix unintended writing zeros to PHY registerRyuta NAKANISHI
[ Upstream commit 898c7a9ec81620125f2463714a0f4dea18ad6e54 ] Similar to commit 4a90bbb478db ("phy: uniphier-pcie: Fix updating phy parameters"), in function uniphier_u3ssphy_set_param(), unintentionally write zeros to other fields when writing PHY registers. Fixes: 5ab43d0f8697 ("phy: socionext: add USB3 PHY driver for UniPhier SoC") Signed-off-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1640150369-4134-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17phy: qcom-qusb2: Fix a memory leak on probeVladimir Zapolskiy
[ Upstream commit bf7ffcd0069d30e2e7ba2b827f08c89f471cd1f3 ] On success nvmem_cell_read() returns a pointer to a dynamically allocated buffer, and therefore it shall be freed after usage. The issue is reported by kmemleak: # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff3b3803e4b280 (size 128): comm "kworker/u16:1", pid 107, jiffies 4294892861 (age 94.120s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007739afdc>] __kmalloc+0x27c/0x41c [<0000000071c0fbf8>] nvmem_cell_read+0x40/0xe0 [<00000000e803ef1f>] qusb2_phy_init+0x258/0x5bc [<00000000fc81fcfa>] phy_init+0x70/0x110 [<00000000e3d48a57>] dwc3_core_soft_reset+0x4c/0x234 [<0000000027d1dbd4>] dwc3_core_init+0x68/0x990 [<000000001965faf9>] dwc3_probe+0x4f4/0x730 [<000000002f7617ca>] platform_probe+0x74/0xf0 [<00000000a2576cac>] really_probe+0xc4/0x470 [<00000000bc77f2c5>] __driver_probe_device+0x11c/0x190 [<00000000130db71f>] driver_probe_device+0x48/0x110 [<0000000019f36c2b>] __device_attach_driver+0xa4/0x140 [<00000000e5812ff7>] bus_for_each_drv+0x84/0xe0 [<00000000f4bac574>] __device_attach+0xe4/0x1c0 [<00000000d3beb631>] device_initial_probe+0x20/0x30 [<000000008019b9db>] bus_probe_device+0xa4/0xb0 Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210922233548.2150244-1-vladimir.zapolskiy@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()Christophe JAILLET
[ Upstream commit f7eedcb8539ddcbb6fe7791f1b4ccf43f905c72f ] Add an error handling path in the probe to release some resources, as already done in the remove function. Fixes: 609adde838f4 ("phy: Add a driver for dm816x USB PHY") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ac5136881f6bdec50be19b3bf73b3bc1b15ef1f1.1622898974.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14phy: uniphier-pcie: Fix updating phy parametersKunihiko Hayashi
[ Upstream commit 4a90bbb478dbf18ecdec9dcf8eb708e319d24264 ] The current driver uses a value from register TEST_O as the original value for register TEST_I, though, the value is overwritten by "param", so there is a bug that the original value isn't no longer used. The value of TEST_O[7:0] should be masked with "mask", replaced with "param", and placed in the bitfield TESTI_DAT_MASK as new TEST_I value. Fixes: c6d9b1324159 ("phy: socionext: add PCIe PHY driver support") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1623037842-19363-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionallyGeert Uytterhoeven
[ Upstream commit 6cb17707aad869de163d7bf42c253caf501be4e2 ] Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of ARMADA375_USBCLUSTER_PHY to MACH_ARMADA_375, and ask the user in case of compile-testing. Fixes: eee47538ec1f2619 ("phy: add support for USB cluster on the Armada 375 SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210208150252.424706-1-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()Yang Yingliang
[ Upstream commit e1723d8b87b73ab363256e7ca3af3ddb75855680 ] This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210407092716.3270248-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04phy: rockchip-emmc: emmc_phy_init() always return 0Chris Ruehl
[ Upstream commit 39961bd6b70e5a5d7c4b5483ad8e1db6b5765c60 ] rockchip_emmc_phy_init() return variable is not set with the error value if clk_get() failed. 'emmcclk' is optional, thus use clk_get_optional() and if the return value != NULL make error processing and set the return code accordingly. Fixes: 52c0624a10cce phy: rockchip-emmc: Set phyctrl_frqsel based on card clock Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201210080454.17379-1-chris.ruehl@gtsys.com.hk Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-07phy: cpcap-usb: Fix warning for missing regulator_disableTony Lindgren
[ Upstream commit 764257d9069a9c19758b626cc1ba4ae079335d9e ] On deferred probe, we will get the following splat: cpcap-usb-phy cpcap-usb-phy.0: could not initialize VBUS or ID IIO: -517 WARNING: CPU: 0 PID: 21 at drivers/regulator/core.c:2123 regulator_put+0x68/0x78 ... (regulator_put) from [<c068ebf0>] (release_nodes+0x1b4/0x1fc) (release_nodes) from [<c068a9a4>] (really_probe+0x104/0x4a0) (really_probe) from [<c068b034>] (driver_probe_device+0x58/0xb4) Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20201230102105.11826-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failureWang Li
[ Upstream commit 51e339deab1e51443f6ac3b1bd5cd6cc8e8fe1d9 ] pm_runtime_enable() will decrease power disable depth. Thus a pairing increment is needed on the error handling path to keep it balanced. Fixes: 5d8042e95fd4 ("phy: rcar-gen3-usb2: Add support for r8a77470") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Li <wangli74@huawei.com> Link: https://lore.kernel.org/r/20201126024412.4046845-1-wangli74@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-02phy: tegra: xusb: Fix dangling pointer on probe failureMarc Zyngier
[ Upstream commit eb9c4dd9bdfdebaa13846c16a8c79b5b336066b6 ] If, for some reason, the xusb PHY fails to probe, it leaves a dangling pointer attached to the platform device structure. This would normally be harmless, but the Tegra XHCI driver then goes and extract that pointer from the PHY device. Things go downhill from there: 8.752082] [004d554e5145533c] address between user and kernel address ranges [ 8.752085] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 8.752088] Modules linked in: max77620_regulator(E+) xhci_tegra(E+) sdhci_tegra(E+) xhci_hcd(E) sdhci_pltfm(E) cqhci(E) fixed(E) usbcore(E) scsi_mod(E) sdhci(E) host1x(E+) [ 8.752103] CPU: 4 PID: 158 Comm: systemd-udevd Tainted: G S W E 5.9.0-rc7-00298-gf6337624c4fe #1980 [ 8.752105] Hardware name: NVIDIA Jetson TX2 Developer Kit (DT) [ 8.752108] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 8.752115] pc : kobject_put+0x1c/0x21c [ 8.752120] lr : put_device+0x20/0x30 [ 8.752121] sp : ffffffc012eb3840 [ 8.752122] x29: ffffffc012eb3840 x28: ffffffc010e82638 [ 8.752125] x27: ffffffc008d56440 x26: 0000000000000000 [ 8.752128] x25: ffffff81eb508200 x24: 0000000000000000 [ 8.752130] x23: ffffff81eb538800 x22: 0000000000000000 [ 8.752132] x21: 00000000fffffdfb x20: ffffff81eb538810 [ 8.752134] x19: 3d4d554e51455300 x18: 0000000000000020 [ 8.752136] x17: ffffffc008d00270 x16: ffffffc008d00c94 [ 8.752138] x15: 0000000000000004 x14: ffffff81ebd4ae90 [ 8.752140] x13: 0000000000000000 x12: ffffff81eb86a4e8 [ 8.752142] x11: ffffff81eb86a480 x10: ffffff81eb862fea [ 8.752144] x9 : ffffffc01055fb28 x8 : ffffff81eb86a4a8 [ 8.752146] x7 : 0000000000000001 x6 : 0000000000000001 [ 8.752148] x5 : ffffff81dff8bc38 x4 : 0000000000000000 [ 8.752150] x3 : 0000000000000001 x2 : 0000000000000001 [ 8.752152] x1 : 0000000000000002 x0 : 3d4d554e51455300 [ 8.752155] Call trace: [ 8.752157] kobject_put+0x1c/0x21c [ 8.752160] put_device+0x20/0x30 [ 8.752164] tegra_xusb_padctl_put+0x24/0x3c [ 8.752170] tegra_xusb_probe+0x8b0/0xd10 [xhci_tegra] [ 8.752174] platform_drv_probe+0x60/0xb4 [ 8.752176] really_probe+0xf0/0x504 [ 8.752179] driver_probe_device+0x100/0x170 [ 8.752181] device_driver_attach+0xcc/0xd4 [ 8.752183] __driver_attach+0xb0/0x17c [ 8.752185] bus_for_each_dev+0x7c/0xd4 [ 8.752187] driver_attach+0x30/0x3c [ 8.752189] bus_add_driver+0x154/0x250 [ 8.752191] driver_register+0x84/0x140 [ 8.752193] __platform_driver_register+0x54/0x60 [ 8.752197] tegra_xusb_init+0x40/0x1000 [xhci_tegra] [ 8.752201] do_one_initcall+0x54/0x2d0 [ 8.752205] do_init_module+0x68/0x29c [ 8.752207] load_module+0x2178/0x26c0 [ 8.752209] __do_sys_finit_module+0xb0/0x120 [ 8.752211] __arm64_sys_finit_module+0x2c/0x40 [ 8.752215] el0_svc_common.constprop.0+0x80/0x240 [ 8.752218] do_el0_svc+0x30/0xa0 [ 8.752220] el0_svc+0x18/0x50 [ 8.752223] el0_sync_handler+0x90/0x318 [ 8.752225] el0_sync+0x158/0x180 [ 8.752230] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (3940f000) [ 8.752232] ---[ end trace 90f6c89d62d85ff5 ]--- Reset the pointer on probe failure fixes the issue. Fixes: 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201013095820.311376-1-maz@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-01phy: marvell: comphy: Convert internal SMCC firmware return codes to errnoPali Rohár
commit ea17a0f153af2cd890e4ce517130dcccaa428c13 upstream. Driver ->power_on and ->power_off callbacks leaks internal SMCC firmware return codes to phy caller. This patch converts SMCC error codes to standard linux errno codes. Include file linux/arm-smccc.h already provides defines for SMCC error codes, so use them instead of custom driver defines. Note that return value is signed 32bit, but stored in unsigned long type with zero padding. Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Link: https://lore.kernel.org/r/20200902144344.16684-2-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07phy: ti: am654: Fix a leak in serdes_am654_probe()Dan Carpenter
[ Upstream commit 850280156f6421a404f2351bee07a0e7bedfd4c6 ] If devm_phy_create() fails then we need to call of_clk_del_provider(node) to undo the call to of_clk_add_provider(). Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200905124648.GA183976@mwanda Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01phy: samsung: s5pv210-usb2: Add delay after resetJonathan Bakker
[ Upstream commit 05942b8c36c7eb5d3fc5e375d4b0d0c49562e85d ] The USB phy takes some time to reset, so make sure we give it to it. The delay length was taken from the 4x12 phy driver. This manifested in issues with the DWC2 driver since commit fe369e1826b3 ("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.") where the endianness check would read the DWC ID as 0 due to the phy still resetting, resulting in the wrong endian mode being chosen. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/BN6PR04MB06605D52502816E500683553A3D10@BN6PR04MB0660.namprd04.prod.outlook.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY initSivaprakash Murugesan
commit afd55e6d1bd35b4b36847869011447a83a81c8e0 upstream. There were some problem in ipq8074 Gen2 PCIe phy init sequence. 1. Few register values were wrongly updated in the phy init sequence. 2. The register QSERDES_RX_SIGDET_CNTRL is a RX tuning parameter register which is added in serdes table causing the wrong register was getting updated. 3. Clocks and resets were not added in the phy init. Fix these to make Gen2 PCIe port on ipq8074 devices to work. Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074") Cc: stable@vger.kernel.org Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1596036607-11877-4-git-send-email-sivaprak@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-19phy: armada-38x: fix NETA lockup when repeatedly switching speedsRussell King
[ Upstream commit 1dea06cd643da38931382ebdc151efced201ffad ] The mvneta hardware appears to lock up in various random ways when repeatedly switching speeds between 1G and 2.5G, which involves reprogramming the COMPHY. It is not entirely clear why this happens, but best guess is that reprogramming the COMPHY glitches mvneta clocks causing the hardware to fail. It seems that rebooting resolves the failure, but not down/up cycling the interface alone. Various other approaches have been tried, such as trying to cleanly power down the COMPHY and then take it back through the power up initialisation, but this does not seem to help. It was finally noticed that u-boot's last step when configuring a COMPHY for "SGMII" mode was to poke at a register described as "GBE_CONFIGURATION_REG", which is undocumented in any external documentation. All that we have is the fact that u-boot sets a bit corresponding to the "SGMII" lane at the end of COMPHY initialisation. Experimentation shows that if we clear this bit prior to changing the speed, and then set it afterwards, mvneta does not suffer this problem on the SolidRun Clearfog when switching speeds between 1G and 2.5G. This problem was found while script-testing phylink. This fix also requires the corresponding change to DT to be effective. See "ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds". Fixes: 14dc100b4411 ("phy: armada38x: add common phy support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/E1jxtRj-0003Tz-CG@rmk-PC.armlinux.org.uk Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19phy: renesas: rcar-gen3-usb2: move irq registration to initYoshihiro Shimoda
[ Upstream commit 08b0ad375ca66181faee725b1b358bcae8d592ee ] If CONFIG_DEBUG_SHIRQ was enabled, r8a77951-salvator-xs could boot correctly. If we appended "earlycon keep_bootcon" to the kernel command like, we could get kernel log like below. SError Interrupt on CPU0, code 0xbf000002 -- SError CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3-salvator-x-00505-g6c843129e6faaf01 #785 Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT) pstate: 60400085 (nZCv daIf +PAN -UAO BTYPE=--) pc : rcar_gen3_phy_usb2_irq+0x14/0x54 lr : free_irq+0xf4/0x27c This means free_irq() calls the interrupt handler while PM runtime is not getting if DEBUG_SHIRQ is enabled and rcar_gen3_phy_usb2_probe() failed. To fix the issue, move the irq registration place to rcar_gen3_phy_usb2_init() which is ready to handle the interrupts. Note that after the commit 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs") which is merged into v5.2, since this driver creates multiple phy instances, needs to check whether one of phy instances is initialized. However, if we backport this patch to v5.1 or less, we don't need to check it because such kernel have single phy instance. Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 9f391c574efc ("phy: rcar-gen3-usb2: add runtime ID/VBUS pin detection") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1594986297-12434-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHYMarek Szyprowski
[ Upstream commit dcbabfeb17c3c2fdb6bc92a3031ecd37df1834a8 ] PHY calibration is needed only for USB2.0 (UTMI) PHY, so skip calling calibration code when phy_calibrate() is called for USB3.0 (PIPE3) PHY. Fixes: d8c80bb3b55b ("phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200708133800.3336-1-m.szyprowski@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22phy: sun4i-usb: fix dereference of pointer phy0 before it is null checkedColin Ian King
[ Upstream commit 38b1927e5bf9bcad4a2e33189ef1c5569f9599ba ] Currently pointer phy0 is being dereferenced via the assignment of phy on the call to phy_get_drvdata before phy0 is null checked, this can lead to a null pointer dereference. Fix this by performing the null check on phy0 before the call to phy_get_drvdata. Also replace the phy0 == NULL check with the more usual !phy0 idiom. Addresses-Coverity: ("Dereference before null check") Fixes: e6f32efb1b12 ("phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200625124428.83564-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24drivers: phy: sr-usb: do not use internal fsm for USB2 phy initBharat Gooty
[ Upstream commit 6f0577d1411337a0d97d545abe4a784e9e611516 ] During different reboot cycles, USB PHY PLL may not always lock during initialization and therefore can cause USB to be not usable. Hence do not use internal FSM programming sequence for the USB PHY initialization. Fixes: 4dcddbb38b64 ("phy: sr-usb: Add Stingray USB PHY driver") Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Link: https://lore.kernel.org/r/20200513173947.10919-1-rayagonda.kokatanur@broadcom.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23phy: uniphier-usb3ss: Add Pro5 supportKunihiko Hayashi
[ Upstream commit 9376fa634afc207a3ce99e0957e04948c34d6510 ] Pro5 SoC has same scheme of USB3 ss-phy as Pro4, so the data for Pro5 is equivalent to Pro4. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25phy: ti: gmii-sel: do not fail in case of gmiiGrygorii Strashko
[ Upstream commit 58aa7729310db04ffcc022c98002dd8fcb486c58 ] The "gmii" PHY interface mode is supported on TI AM335x/437x/5xx SoCs, so don't fail if it's selected. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25phy: ti: gmii-sel: fix set of copy-paste errorsGrygorii Strashko
[ Upstream commit eefed634eb61e4094b9fb8183cb8d43b26838517 ] - under PHY_INTERFACE_MODE_MII the 'mode' func parameter is assigned instead of 'gmii_sel_mode' and it's working only because the default value 'gmii_sel_mode' is set to 0. - console outputs use 'rgmii_id' and 'mode' values to print PHY mode instead of using 'submode' value which is representing PHY interface mode now. This patch fixes above two cases. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-12phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle intervalTony Lindgren
commit 46b7edf1c7b7c91004c4db2c355cbd033f2385f9 upstream. I've noticed that when writing data to the modem the writes can time out at some point eventually. Looks like kicking the modem idle GPIO every 600 ms instead of once a second fixes the issue. Note that this rate is different from our runtime PM autosuspend rate MDM6600_MODEM_IDLE_DELAY_MS that we still want to keep at 1 second, so let's add a separate define for PHY_MDM6600_IDLE_KICK_MS. Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12phy: mapphone-mdm6600: Fix timeouts by adding wake-up handlingTony Lindgren
commit be4e3c737eebd75815633f4b8fd766defaf0f1fc upstream. We have an interrupt handler for the wake-up GPIO pin, but we're missing the code to wake-up the system. This can cause timeouts receiving data for the UART that shares the wake-up GPIO pin with the USB PHY. All we need to do is just wake the system and kick the autosuspend timeout to fix the issue. Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4") Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11phy: qualcomm: Adjust indentation in read_poll_timeoutNathan Chancellor
commit a89806c998ee123bb9c0f18526e55afd12c0c0ab upstream. Clang warns: ../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:83:4: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); ^ ../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:80:3: note: previous statement is here if (readl_relaxed(addr) & mask) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 1de990d8a169 ("phy: qcom: Add driver for QCOM APQ8064 SATA PHY") Link: https://github.com/ClangBuiltLinux/linux/issues/816 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-01phy: cpcap-usb: Prevent USB line glitches from waking up modemTony Lindgren
[ Upstream commit 63078b6ba09e842f09df052c5728857389fddcd2 ] The micro-USB connector on Motorola Mapphone devices can be muxed between the SoC and the mdm6600 modem. But even when used for the SoC, configuring the PHY with ID pin grounded will wake up the modem from idle state. Looks like the issue is probably caused by line glitches. We can prevent the glitches by using a previously unknown mode of the GPIO mux to prevent the USB lines from being connected to the moden while configuring the USB PHY, and enable the USB lines after configuring the PHY. Note that this only prevents waking up mdm6600 as regular USB A-host mode, and does not help when connected to a lapdock. The lapdock specific issue still needs to be debugged separately. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-01phy: qcom-qmp: Increase PHY ready timeoutBjorn Andersson
[ Upstream commit cd217ee6867d285ceecd610fa1006975d5c683fa ] It's typical for the QHP PHY to take slightly above 1ms to initialize, so increase the timeout of the PHY ready check to 10ms - as already done in the downstream PCIe driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Evan Green <evgreen@chromium.org> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26phy/rockchip: inno-hdmi: round clock rate down to closest 1000 HzJonas Karlman
[ Upstream commit 4f510aa10468954b1da4e94689c38ac6ea8d3627 ] Commit 287422a95fe2 ("drm/rockchip: Round up _before_ giving to the clock framework") changed what rate clk_round_rate() is called with, an additional 999 Hz added to the requsted mode clock. This has caused a regression on RK3328 and presumably also on RK3228 because the inno-hdmi-phy clock requires an exact match of the requested rate in the pre pll config table. When an exact match is not found the parent clock rate (24MHz) is returned to the clk_round_rate() caller. This cause wrong pixel clock to be used and result in no-signal when configuring a mode on RK3328. Fix this by rounding the rate down to closest 1000 Hz in round_rate func, this allows an exact match to be found in pre pll config table. Fixes: 287422a95fe2 ("drm/rockchip: Round up _before_ giving to the clock framework") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-04 04:45:49 +0000