| Age | Commit message (Collapse) | Author |
|---|
|
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724154823.15998-6-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724154823.15998-5-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724154823.15998-4-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Since commit 9d5f51dcdb64 ("phy: usb: Add support for new Synopsys USB
controller on the 7211b0") the driver only supports OF probe so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724154823.15998-3-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724154823.15998-2-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Rockchip RK3528 integrates one naneng-combphy that is able to operate in
PCIe and USB3 mode. The control logic is similar to previous variants of
naneng-combphy but the register layout is apparently different from the
RK3568 one.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250728102947.38984-7-ziyao@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
All supported variants of naneng-combphy follow a register layout
similar to the RK3568 variant with some exceptions of SoC-specific
registers.
Add RK3568 prefix for the common set of registers and the corresponding
SoC prefix for SoC-specific registers, making usage of definitions clear
and preparing for future COMBPHY variants with a different register
layout.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250728102947.38984-6-ziyao@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The boot firmware may disable the U3 port early during boot and leave it
up to the controller or PHY driver to re-enable U3 when needed.
The Rockchip USBDP PHY driver currently does this for RK3576 and RK3588,
something the Rockchip Naneng Combo PHY driver never does for RK3568.
This may result in USB 3.0 ports being limited to only using USB 2.0 or
in special cases not working at all on RK3568.
Write to PIPE_GRF USB3OTGx_CON1 reg to ensure the U3 port is enabled
when a PHY with PHY_TYPE_USB3 mode is used.
Fixes: 7160820d742a ("phy: rockchip: add naneng combo phy for RK3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250723072324.2246498-1-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Nothing seems to prevent the driver from being built on non-TI platforms
so enable compile testing for wider build coverage.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724131623.2662-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Enable runtime power management for the device. The PHY framework
handles calling pm_runtime_(get|put)_sync when powering on/off this
device.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Link: https://lore.kernel.org/r/20250224-cdns_phy_pm-v1-1-0fe2c544cc87@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The code in cdns-dphy has probably been part of a DSI driver in the
past. Remove DSI defines and variables which are not used or do not
actually do anything. Also rename cdns_dsi_get_dphy_pll_cfg() to
cdns_dphy_get_pll_cfg(), i.e. drop the "dsi", as it's not relevant here.
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250723-cdns-dphy-hs-clk-rate-fix-v1-2-d4539d44cbe7@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The DPHY driver does not return the actual hs_clk_rate, so the DSI
driver has no idea what clock was actually achieved. Set the realized
hs_clk_rate to the opts struct, so that the DSI driver gets it back.
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250723-cdns-dphy-hs-clk-rate-fix-v1-1-d4539d44cbe7@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference to the control device taken by
of_find_device_by_node() during probe when the driver is unbound.
Fixes: 918ee0d21ba4 ("usb: phy: omap-usb3: Don't use omap_get_control_dev()")
Cc: stable@vger.kernel.org # 3.13
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724131206.2211-4-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference to the control device taken by
of_find_device_by_node() during probe when the driver is unbound.
Fixes: 478b6c7436c2 ("usb: phy: omap-usb2: Don't use omap_get_control_dev()")
Cc: stable@vger.kernel.org # 3.13
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724131206.2211-3-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the references taken to the PMC OF node and device by
of_parse_phandle() and of_find_device_by_node() during probe.
Note the holding a reference to the PMC device does not prevent the
PMC regmap from going away (e.g. if the PMC driver is unbound) so there
is no need to keep the reference.
Fixes: 2d1021487273 ("phy: tegra: xusb: Add wake/sleepwalk for Tegra210")
Cc: stable@vger.kernel.org # 5.14
Cc: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724131206.2211-2-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
property "qcom,tune-usb2-preem" is for EUSB2_TUNE_USB2_PREEM
property "qcom,tune-usb2-amplitude" is for EUSB2_TUNE_IUSB2
The downstream correspondence is as follows:
EUSB2_TUNE_USB2_PREEM: Tx pre-emphasis tuning
EUSB2_TUNE_IUSB2: HS trasmit amplitude
EUSB2_TUNE_SQUELCH_U: Squelch detection threshold
EUSB2_TUNE_HSDISC: HS disconnect threshold
EUSB2_TUNE_EUSB_SLEW: slew rate
Fixes: 31bc94de7602 ("phy: qualcomm: phy-qcom-eusb2-repeater: Don't zero-out registers")
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250812093957.32235-1-mitltlatltl@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Qualcomm Milos Synopsys eUSB2 PHY, SM8750 QMP phy support, M31
eUSB2 PHY driver
- Samsung Exynos990 usbdrd phy, Exynos7870 MIPI phy support
- Renesas RZ/V2N usb2-phy support
Updates:
- Bulk Yaml binding conversion By Rob H (too many to be listed)
- cadence: Sierra PCIe, USB PHY multilink configuration support
- Qualcomm refactoring of UFS PHY reset and UFS driver support for
phy calibrate API"
* tag 'phy-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (74 commits)
phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequence
dt-bindings: phy: Convert brcm,sr-usb-combo-phy to DT schema
dt-bindings: phy: Convert ti,da830-usb-phy to DT schema
dt-bindings: phy: marvell,mmp2-usb-phy: Drop status from the example
dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* properties
phy: exynos-mipi-video: correct cam0 sysreg property name for exynos7870
phy: qcom: phy-qcom-snps-eusb2: Update init sequence per HPG 1.0.2
phy: qcom: phy-qcom-snps-eusb2: Add missing write from init sequence
dt-bindings: phy: qcom,snps-eusb2: document the Milos Synopsys eUSB2 PHY
dt-bindings: usb: qcom,snps-dwc3: Add Milos compatible
phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal
phy: rockchip-pcie: Enable all four lanes if required
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615
phy: qcom: qmp-combo: Add missing PLL (VCO) configuration on SM8750
phy: qcom: m31-eusb2: drop registration printk
phy: qcom: m31-eusb2: fix match data santity check
phy: qcom: qmp-pcie: Update PHY settings for QCS8300 & SA8775P
phy: qualcomm: phy-qcom-eusb2-repeater: Don't zero-out registers
dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values
phy: mediatek: tphy: Cleanup and document slew calibration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- battery-info: replace any DT specific bits with fwnode usage
- replace any device-tree code with generic fwnode based handling
Power-supply drivers:
- ug3105_battery: use battery-info API
- qcom_battmgr: report capacity
- qcom_battmgr: support LiPo battery reporting
- add missing missing power-supply ref to a bunch of DT bindings
- update drivers regarding pm_runtime_autosuspend() usage
- misc minor fixes and cleanups
Reset drivers:
- misc minor cleanups"
* tag 'for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
power: supply: core: fix static checker warning
power: supply: twl4030_charger: Remove redundant pm_runtime_mark_last_busy() calls
power: supply: bq24190: Remove redundant pm_runtime_mark_last_busy() calls
MAINTAINERS: rectify file entry in QUALCOMM SMB CHARGER DRIVER
power: supply: max1720x correct capacity computation
MAINTAINERS: add myself as smbx charger driver maintainer
power: supply: pmi8998_charger: rename to qcom_smbx
power: supply: qcom_pmi8998_charger: fix wakeirq
power: supply: max14577: Handle NULL pdata when CONFIG_OF is not set
power: return the correct error code
power: reset: POWER_RESET_TORADEX_EC should depend on ARCH_MXC
power: supply: cpcap-charger: Fix null check for power_supply_get_by_name
power: supply: bq25980_charger: Constify reg_default array
power: supply: bq256xx_charger: Constify reg_default array
power: reset: at91-sama5d2_shdwc: Refactor wake-up source logging to use dev_info
power: reset: qcom-pon: Rename variables to use generic naming
power: supply: qcom_battmgr: Add lithium-polymer entry
power: supply: qcom_battmgr: Report battery capacity
power: supply: bq24190: Free battery_info
power: supply: ug3105_battery: Switch to power_supply_batinfo_ocv2cap()
...
|
|
The current configuration used for the IPQ5332 M31 USB PHY fails the
Near End High Speed Signal Quality compliance test. To resolve this,
update the initialization sequence as specified in the Hardware Design
Document.
Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver")
Cc: stable@kernel.org
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250630-ipq5332_hsphy_complaince-v2-1-63621439ebdb@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix the cam0 sysreg property name (samsung,cam0-sysreg), which has been
erroneously declared as samsung,cam-sysreg. This follows the same name
used in Exynos5433 PHY.
Fixes: 543f5e314282 ("phy: exynos-mipi-video: introduce support for exynos7870")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250710-exynos7870-mipi-phy-fix-v2-1-5cf50d69c9d7@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The eUSB2 HPG version 1.0.2 asks to clear bits [7:1] on all targets.
Implement that change in the driver to follow.
See also https://lore.kernel.org/linux-arm-msm/7d073433-f254-4d75-a68b-d184f900294a@oss.qualcomm.com/
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250715-sm7635-eusb-phy-v3-4-6c3224085eb6@fairphone.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
As per a commit from Qualcomm's downstream 6.1 kernel[0], the init
sequence is missing setting the CMN_CTRL_OVERRIDE_EN bit back to 0 at
the end, as per the 'latest' HPG revision (as of November 2023).
[0] https://git.codelinaro.org/clo/la/kernel/qcom/-/commit/b77774a89e3fda3246e09dd39e16e2ab43cd1329
Fixes: 80090810f5d3 ("phy: qcom: Add QCOM SNPS eUSB2 driver")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250715-sm7635-eusb-phy-v3-3-6c3224085eb6@fairphone.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
pcie_conf is used to touch TEST_WRITE strobe signal. This signal should
be enabled, a little time waited, and then disabled. Current code clearly
was copy-pasted and never disables the strobe signal. Adjust the define.
While at it, remove PHY_CFG_RD_MASK which has been unused since
64cdc0360811 ("phy: rockchip-pcie: remove unused phy_rd_cfg function").
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/d514d5d5627680caafa8b7548cbdfee4307f5440.1751322015.git.geraldogabriel@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Current code enables only Lane 0 because pwr_cnt will be incremented on
first call to the function. Let's reorder the enablement code to enable
all 4 lanes through GRF.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Valmantas Paliksa <walmis@gmail.com>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/16b610aab34e069fd31d9f57260c10df2a968f80.1751322015.git.geraldogabriel@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When phy->ref_clk is NULL PTR_ERR(NULL) will be a success. Fix this by
using -ENOENT when phy->ref_clk is NULL instead.
Fixes: 80090810f5d3 ("phy: qcom: Add QCOM SNPS eUSB2 driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aDCbeuCTy9zyWJAM@stanley.mountain/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20250710172403.2593193-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add missing DP PHY status and VCO clock configuration registers to fix
configuring the VCO rate on SM8750. Without proper VCO rate setting, it
works on after-reset half of rate which is not enough for DP over USB to
work as seen on logs:
[drm:msm_dp_ctrl_link_train_1_2] *ERROR* max v_level reached
[drm:msm_dp_ctrl_link_train_1_2] *ERROR* link training #1 on phy 0 failed. ret=-11
Fixes: c4364048baf4 ("phy: qcom: qmp-combo: Add new PHY sequences for SM8750")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250616062541.7167-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drivers should generally be quiet on successful probe so drop the
registration printk from the recently added M31 EUSB2 driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250617080401.11147-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The device_get_match_data() helper returns NULL if a new entry is ever
added without corresponding match data.
Fixes: 9c8504861cc4 ("phy: qcom: Add M31 based eUSB2 PHY driver")
Cc: Wesley Cheng <quic_wcheng@quicinc.com>
Cc: Melody Olvera <melody.olvera@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250617080503.11262-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Update the PHY settings to align with the latest PCIe PHY
Hardware Programming Guide for both PCIe controllers on the
SA8775P platform.
Add the ln_shrd region for SA8775P, incorporating new register
writes as specified in the updated Hardware Programming Guide.
Update pcs table for QCS8300, since both QCS8300 and SA8775P are
closely related and share same pcs settings.
Signed-off-by: Mrinmay Sarkar <mrinmay.sarkar@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250617-update_phy-v5-1-2df83ed6a373@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Zeroing out registers does not happen in the downstream kernel, and will
"tune" the repeater in surely unexpected ways since most registers don't
have a reset value of 0x0.
Stop doing that and instead just set the registers that are in the init
sequence (though long term I don't think there's actually PMIC-specific
init sequences, there's board specific tuning, but that's a story for
another day).
Fixes: 99a517a582fc ("phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250617-eusb2-repeater-tuning-v2-2-ed6c484f18ee@fairphone.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
While it's true that, generally, the T-PHY V3 does not support the
slew calibration process, some minor versions of it actually do,
moreover, some SoCs may not support this even though the version
of the PHY IP does.
The reference clock and rate coefficient parameters are used only
for slew calibration: move those to platform data, then document
and change the checks in hs_slew_rate_calibrate() to perform the
calibration only if:
- EYE value was not supplied (pre-calculated calibration); and
- Slew reference clock value is present (not zero); and
- Slew coefficient is present (not zero).
Moreover, change the probe function to always check if both the
slew reference clock and coefficient properties are present and,
if not, assign the value from platform data (which, as reminder,
if not added means that it's zero!), instead of checking the PHY
IP version.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250623120315.109881-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
As struct mtk_phy_pdata was almost fully documented, transfer
the comments into kerneldoc on top.
While at it, also rewrite the comments to both improve the writing
writing and the actual information in the documentation, and add a
description for the `version` member of the structure.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250623120315.109881-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
power_supply_get_by_reference
(devm_)power_supply_get_by_phandle now internally uses fwnode and are no
longer DT specific. Thus drop the ifdef check for CONFIG_OF and rename
to (devm_)power_supply_get_by_reference to avoid the DT terminology.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250430-psy-core-convert-to-fwnode-v2-5-f9643b958677@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add the <linux/bitfield.h> header to prevent a build error:
drivers/phy/qualcomm/phy-qcom-m31-eusb2.c: In function 'm31eusb2_phy_init':
drivers/phy/qualcomm/phy-qcom-m31-eusb2.c:210:37: error: implicit declaration of function 'FIELD_PREP' [-Wimplicit-function-declaration]
210 | FIELD_PREP(FSEL, data->fsel));
Fixes: 9c8504861cc4 ("phy: qcom: Add M31 based eUSB2 PHY driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Wesley Cheng <quic_wcheng@quicinc.com>
Cc: Melody Olvera <melody.olvera@oss.qualcomm.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>
Cc: linux-phy@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/20250617034249.2067135-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drivers should generally be quiet on successful probe, but this is not
followed by some PHY drivers, for example:
snps-eusb2-hsphy 88e1000.phy: Registered Snps-eUSB2 phy
qcom-eusb2-repeater c432000.spmi:pmic@7:phy@fd00: Registered Qcom-eUSB2 repeater
qcom-eusb2-repeater c432000.spmi:pmic@a:phy@fd00: Registered Qcom-eUSB2 repeater
qcom-eusb2-repeater c432000.spmi:pmic@b:phy@fd00: Registered Qcom-eUSB2 repeater
snps-eusb2-hsphy fd3000.phy: Registered Snps-eUSB2 phy
snps-eusb2-hsphy fd9000.phy: Registered Snps-eUSB2 phy
snps-eusb2-hsphy fde000.phy: Registered Snps-eUSB2 phy
snps-eusb2-hsphy 88e0000.phy: Registered Snps-eUSB2 phy
snps-eusb2-hsphy 88e2000.phy: Registered Snps-eUSB2 phy
Drop (or demote to debug level) unnecessary registration info messages
to make boot logs a little less noisy.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250523085112.11287-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
for 100 MHz refclk
Add register sequences and support for PCIe multilink + USB configuration
for 100MHz reference clock. The same SSC is used for both PCIe and USB.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Co-developed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250616064705.3225758-3-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add register sequences to support PCIe multilink configuration for 100MHz
reference clock. Maximum two PCIe links are supported.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250616064705.3225758-2-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use a more common format for the id table sentinel for consistency and
symmetry.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-8-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There is already a loop index variable declared at function scope so
drop the unnecessary overloaded loop declarations.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-7-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The devm_of_phy_optional_get() takes an optional name argument as its
third parameter and not an index like the recently replaced
devm_of_phy_get_by_index().
Replace 0 with an explicit NULL for consistency and readability.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Clean up the error messages by using a consistent format with a colon
followed by a space and an errno (or unsupported frequency).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-5-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Rename the clock error label which is now used to disable all clocks and
not just the ref clock on phy_init() errors.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to disable the repeater PHY also on phy_init() failure.
Fixes: 3584f6392f09 ("phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater")
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to disable all clocks enabled at phy_init() also on
phy_exit().
Fixes: c4098f3e6134 ("phy: phy-snps-eusb2: add support for exynos2200")
Cc: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
SM8750 utilizes an eUSB2 PHY from M31. Add the initialization
sequences to bring it out of reset and into an operational state. This
differs to the M31 USB driver, in that the M31 eUSB2 driver will
require a connection to an eUSB2 repeater. This PHY driver will handle
the initialization of the associated eUSB2 repeater when required.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250527-sm8750_usb_master-v6-6-d58de3b41d34@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The eUSB2 repeater that exists in the QCOM PMICs are utilized for several
different eUSB2 PHY vendors, such as M31 or Synopsys. Hence, the wording
needs to be updated to remove associations to a specific vendor.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250527-sm8750_usb_master-v6-5-d58de3b41d34@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add new register offsets and PHY values for SM8750. Some of the previous
definitions can be leveraged from older PHY versions as offsets within
registers have not changed. This also adds the required PHY sequence that
is recommended after running hardware characterization.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250527-sm8750_usb_master-v6-4-d58de3b41d34@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If the PHY driver uses another PHY internally (e.g. in case of eUSB2,
repeaters are represented as PHYs), then it would trigger the following
lockdep splat because all PHYs use a single static lockdep key and thus
lockdep can not identify whether there is a dependency or not and
reports a false positive.
Make PHY subsystem use dynamic lockdep keys, assigning each driver a
separate key. This way lockdep can correctly identify dependency graph
between mutexes.
============================================
WARNING: possible recursive locking detected
6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 Not tainted
--------------------------------------------
kworker/u51:0/78 is trying to acquire lock:
ffff0008116554f0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c
but task is already holding lock:
ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&phy->mutex);
lock(&phy->mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by kworker/u51:0/78:
#0: ffff000800010948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x18c/0x5ec
#1: ffff80008036bdb0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x5ec
#2: ffff0008094ac8f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x188
#3: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c
stack backtrace:
CPU: 0 UID: 0 PID: 78 Comm: kworker/u51:0 Not tainted 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 PREEMPT
Hardware name: Qualcomm CRD, BIOS 6.0.240904.BOOT.MXF.2.4-00528.1-HAMOA-1 09/ 4/2024
Workqueue: events_unbound deferred_probe_work_func
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
print_deadlock_bug+0x258/0x348
__lock_acquire+0x10fc/0x1f84
lock_acquire+0x1c8/0x338
__mutex_lock+0xb8/0x59c
mutex_lock_nested+0x24/0x30
phy_init+0x4c/0x12c
snps_eusb2_hsphy_init+0x54/0x1a0
phy_init+0xe0/0x12c
dwc3_core_init+0x450/0x10b4
dwc3_core_probe+0xce4/0x15fc
dwc3_probe+0x64/0xb0
platform_probe+0x68/0xc4
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x208/0x5ec
worker_thread+0x1c0/0x368
kthread+0x14c/0x20c
ret_from_fork+0x10/0x20
Fixes: 3584f6392f09 ("phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater")
Fixes: e2463559ff1d ("phy: amlogic: Add Amlogic AXG PCIE PHY Driver")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/lkml/ZnpoAVGJMG4Zu-Jw@hovoldconsulting.com/
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250605-phy-subinit-v3-1-1e1e849e10cd@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In qmp_ufs_power_off, the PHY is already powered down by asserting
QPHY_PCS_POWER_DOWN_CONTROL. Therefore, additional phy_reset and
stopping SerDes are unnecessary. Also this approach does not
align with the phy HW programming guide.
Thus, refactor qmp_ufs_power_off to remove the phy_reset and stop
SerDes calls to simplify the code and ensure alignment with the PHY
HW programming guide.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250526153821.7918-10-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
qmp_ufs_exit() is a wrapper function. It only calls qmp_ufs_com_exit().
Remove it to simplify the ufs phy driver.
Additonally partial Inline(dropping the reset assert) qmp_ufs_com_exit
into qmp_ufs_power_off function to avoid unnecessary function call
and to align with the Phy programming guide.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250526153821.7918-9-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
