summaryrefslogtreecommitdiff
path: root/drivers/power/avs
AgeCommit message (Collapse)Author
2012-12-17ARM: OMAP2+: Drop plat/cpu.h for omap2plusTony Lindgren
The cpu_is_omap macros are now local to arch/arm/mach-omap2 in soc.h and plat/cpu.h can finally be dropped for omap2+. Thanks everybody for help with fixing the drivers. Note that we can now also remove the unused plat/cpu.h from smartreflex.c and isp.c as they will cause compile errors with ARCH_MULTIPLATFORM enabled. Cc: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-13Merge tag 'pm-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC power management and clock changes from Olof Johansson: "This branch contains a largeish set of updates of power management and clock setup. The bulk of it is for OMAP/AM33xx platforms, but also a few around hotplug/suspend/resume on Exynos. It includes a split-up of some of the OMAP clock data into separate files which adds to the diffstat, but gross delta is fairly reasonable." * tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support watchdog: OMAP: fixup for ARM multiplatform support ARM: EXYNOS: Add flush_cache_all in suspend finisher ARM: EXYNOS: Remove scu_enable from cpuidle ARM: EXYNOS: Fix soft reboot hang after suspend/resume ARM: EXYNOS: Add support for rtc wakeup ARM: EXYNOS: fix the hotplug for Cortex-A15 ARM: OMAP2+: omap_device: Correct resource handling for DT boot ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count ARM: OMAP2+: PRM: initialize some PRM functions early ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n ARM: OMAP4: USB: power down MUSB PHY during boot ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP2xxx: clock: drop obsolete clock data ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections ARM: AM33xx: clock: drop obsolete clock data ARM: OMAP3xxx: clk: drop obsolete clock data ...
2012-11-28power: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28power: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-15ARM: OMAP: SmartReflex: pass device dependent data via platform dataJean Pihet
Remove the device dependent code (ex. cpu_is_xxx()) and settings from the driver code and instead pass them via the platform data. This allows a clean separation of the driver code and the platform code, as required by the move of the platform header files to include/linux/platform_data. Note about the smartreflex functional clocks: the smartreflex fclks are derived from sys_clk and have the same name as the main_clk from the hwmod entry, in order for the SmartReflex driver to request the fclk (using clk_get(dev, "fck")). Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-10-08Merge tag 'for_3.7-fixes-pm' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-v3.7-rc1/fixes-pm OMAP PM related fixes for v3.7-rc
2012-10-02ARM: OMAP: SmartReflex: fix error path in init functionJean Pihet
Fix the error handling path in omap_sr_probe to correctly de-allocate resources in case of problems. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-09-12ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQTony Lindgren
Remove hardcoded IRQs in irqs.h and related files as these are no longer needed. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-29ARM: OMAP2+: do not allow SmartReflex to be built as a moduleJean Pihet
Disable the module option for POWER_AVS since this is currently not supported. This patch fixes these error in the case POWER_AVS is set to 'm': arch/arm/mach-omap2/built-in.o: In function `sr_class3_configure': arch/arm/mach-omap2/smartreflex-class3.c:43: undefined reference to `sr_configure_errgen' arch/arm/mach-omap2/built-in.o: In function `sr_class3_disable': arch/arm/mach-omap2/smartreflex-class3.c:33: undefined reference to `sr_disable_errgen' arch/arm/mach-omap2/smartreflex-class3.c:35: undefined reference to `sr_disable' arch/arm/mach-omap2/built-in.o: In function `sr_class3_enable': arch/arm/mach-omap2/smartreflex-class3.c:28: undefined reference to `sr_enable' arch/arm/mach-omap2/built-in.o: In function `sr_class3_init': arch/arm/mach-omap2/smartreflex-class3.c:59: undefined reference to `sr_register_class' Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> [tony@atomide.com: updated to use relative paths for the build error] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-31ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/Jean Pihet
After a clean-up of the interfaces the OMAP Smartreflex IP driver is now a generic driver. Move it to drivers/power/avs/. The build is controlled by the following Kconfig options: . CONFIG_POWER_AVS: general knob for Adaptive Voltage Scaling support, . CONFIG_POWER_AVS_OMAP: AVS(Adaptive Voltage Scaling) support on OMAP containing the version 1 or version 2 of the SmartReflex IP, . CONFIG_POWER_AVS_OMAP_CLASS3: Class 3 implementation of Smartreflex. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>