summaryrefslogtreecommitdiff
path: root/drivers/power/max17042_battery.c
AgeCommit message (Collapse)Author
2012-05-05max17042_battery: Add support for max17047/50 chipRamakrishna Pallala
max17047 is improved version of max17042 chip. It has few HW bug fixes with minor changes in register set. max17050 is same as max17047 chip except its silicon packging. So from driver's point of view there is no difference btw max1047 and max1050. This patch adds the support to dynamically detect the chip type and adds steps to initialize the max17047 chip. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05max17042_battery: Handle irq request failure caseRamakrishna Pallala
suspend/resume functions take action based upon the fuel gauge interrupt. If the rquest irq fails we should assign 0 to client->irq. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-04max17042_battery: Fix power supply and irq registration orderingRamakrishna Pallala
IRQ registration should happen only after power supply object usable. This patch fixes the ordering of power supply and irq registration calls. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-04power_supply: Add voltage_ocv property and use it for max17042 driverRamakrishna Pallala
This adds a new sysfs file called 'voltage_ocv' which gives the Open Circuit Voltage of the battery. This property can be used for platform shutdown policies and can be useful for initial capacity estimations. Note: This patch is generated against linux-next branch. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-04max17042_battery: Move dev_pm_ops struct under CONFIG_PMAnton Vorontsov
This is what we do for the rest of the drivers, saves some bytes. Plus a small style change while at it. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-04max17042_battery: Add suspend/resume hooksRamakrishna Pallala
This patch adds suspend/resume methods to the driver. In suspend method irq line is disabled to avoid i2c read/write errors from the interrupt handler as the i2c bus itself could be in suspend state. In resume function irq line will be re-enabled. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-04max17042_battery: Fix driver exit functionRamakrishna Pallala
This patch fixes driver's remove function: it should free the IRQ. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-04max17042_battery: Fix a couple buffer overflowsDan Carpenter
There are a couple issues here caused by confusion between sizeof() and ARRAY_SIZE(). "table_size" should be the number of elements, but we should allocate it with kcalloc() so that we allocate the correct number of bytes. In max17042_init_model() we don't allocate enough space so we go past the end of the array in max17042_read_model_data() and max17042_model_data_compare(). In max17042_verify_model_lock() we allocate the right amount of space but we call max17042_read_model_data() with the wrong number of elements and also in the for loop we go past the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042_battery: Clean up interrupt handlingRamakrishna Pallala
Max17042 driver has dummy hardIRQ function which does nothing but waking the threaded handler. This patch removes the hardIRQ function and also modifies the interrupt type to falling edge. While we are there, change the macros to comply with the Data sheet. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042_battery: Fix CHARGE_FULL representation.MyungJoo Ham
CHARGE_FULL should represent the full capacity of the battery in uAh. The 0x10 (FullCAP) register shows the compensated full capacity in mAh * 2; e.g., reg(0x10) = 0xBB8 means that it is 1500mAh. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26power_supply: Convert i2c drivers to module_i2c_driverAxel Lin
Factor out some boilerplate code for i2c driver registration into module_i2c_driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Woogyom Kim <milo.kim@ti.com> Cc: Daniel Jeong <daniel.jeong@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Peter Edwards <sweetlilmre@gmail.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042_battery: Make it possible to instantiate driver from DTKarol Lewandowski
Allow both device tree (preferred) and platform data-based driver instantiation. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042_battery: Use devm_kzalloc() where applicableKarol Lewandowski
This allows us to simplify probe and exit function. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042: Change capacity property to use reported SOC registerDirk Brandewie
The SOC register (0dh) reports the state of charge before empty compensation adjustments are applied. The max value reported by this register will decrease as the battery ages. Use the RepSOC register (06h) to report the capacity of the battery. RepSOC contains a filtered version of the battery capacity after empty compensation adjustments have been applied. Reported-by: Gary Keyes <gary.e.keyes@intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042: Add support for signalling change in SOCRamakrishna Pallala
If platform has the alert pin attached to an interrupt source have the driver signal a change in the SOC every 1 percent. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042: Add POR init procedure from Maxim appnoteRamakrishna Pallala
Add power on reset (POR) init procedure defined by the maxim appnote. Using this procedure ensures that the part is configured/initialized correctly at POR and improves early accuracy of the fuel gauge and informs the fuel gauge with the battery characterization parameters. The battery characterization parameters come from the maxim characterization procedure. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-01-04Merge branch 'power-supply-scope' of ↵Anton Vorontsov
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
2011-11-26max17042_battery: Fix error handlingRamakrishna Pallala
In max17042_get_property(...), the values returned by max17042_read_reg are directly assigned to the variables, even if the read results in an error. This patch checks for the return code from max17042_read_reg and exits the function if there is any error. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-10-31drivers/power: Add module.h to the actual modules in drivers/powerPaul Gortmaker
The module.h header is no longer going to be implicitly present everywhere. So real modular users need to call out its use explicitly in advance. [v2: add new users reported by Randy Dunlap <rdunlap@xenotime.net>] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-19max17042_battery: Bugfix of incorrect voltage register value interpretationMyungJoo Ham
The calculation had error in getting voltage values from MAX17042 registers. The least bit denotes 78.125uV (625/8). Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19max17042_battery: Do not lose accuracy calculating current_nowPhilip Rakity
PROP_CURRENT_NOW value is first divided then multiplied up causing a lose of accuracy. Use the same method as PROP_CURRENT_AVG to do the calculation. Signed-off-by: Philip Rakity <prakity@marvell.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19max17042_battery: Divide by 0 crash because r_sns init too latePhilip Rakity
On MMP2 brownstone divide by 0 error since probe sets r_sns after calling power_supply_register. Move the code up a few lines. r_sns comes from the platform data. PROP_CURRENT_AVG and PROP_CURRENT divide the result by r_sns. Signed-off-by: Philip Rakity <prakity@marvell.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08power_supply: MAX17042: Support additional propertiesDonggeun Kim
This patch supports additional properties (PRESENT, CYCLE_COUNT, VOLTAGE_MAX, VOLTAGE_MIN_DESIGN, CURRENT_NOW, CURRENT_AVG, CHARGE_FULL, and TEMP). Plus, initialization code for registers is added. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08max17042_battery: Remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-01-14power_supply: Add MAX17042 Fuel Gauge DriverMyungJoo Ham
The MAX17042 is a fuel gauge with an I2C interface for lithium-ion betteries. Unlike its predecessor MAX17040, MAX17042 uses 16bit registers. Besides, MAX17042 has much more features than MAX17040; e.g., a thermistor, current and current accumulation measurement, battery internal resistance estimate, average values of measurement, and others. This patch implements a driver for MAX17042. In this initial release, we have implemented the most basic features of a fuel gauge: measure the battery capacity and voltage. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-18 14:16:09 +0000