summaryrefslogtreecommitdiff
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2012-01-30Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator This fixes an integration issue with the regulator device tree bindings which shook out in -rc. The bindings were overly enthusiatic when deciding to set a voltage on a regulator and would try to set zero volts on an unconfigured regulator which isn't supported. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Set apply_uV only when min and max voltages are defined
2012-01-26regulator: Set apply_uV only when min and max voltages are definedKarol Lewandowski
apply_uV is errornously set when regulator is instantiated from device tree, even when it doesn't contain any voltage constraints. This commit fixes error: machine_constraints_voltage: CHARGER: failed to apply 0uV constraint for following regulator description in DTS: CHARGER { regulator-min-microamp = <100000>; regulator-max-microamp = <200000>; } Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-24regulator: Fix documentation for of_node parameter of regulator_register()Mark Brown
Commit 5bc75a886353 ("kernel-doc: fix new warning in regulator core") added documentation for of_node to address a warning but the documentation didn't explain what the parameter is for so would be likely to be unhelpful for users. Clarify that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-23kernel-doc: fix new warning in regulator coreRandy Dunlap
Fix new kernel-doc warning: Warning(drivers/regulator/core.c:2741): No description found for parameter 'of_node' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
2012-01-09mfd: Unify abx500 headers in mfd/abx500Linus Walleij
This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. <linux/mfd/ab8500/gpio.h> get prefixed and are now e.g. <linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface remains in <linux/mfd/abx500.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-06regulator: set constraints.apply_uV to 0 in of_get_fixed_voltage_configRichard Zhao
Fix fixed regulator using DT failed to call regulator_register. of_get_regulator_init_data set apply_uV to 1, but fixed regulator doesn't need it. Set it back to 0. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-06regulator: max8925: fix enabled/disabled judgement mistakeKevin Liu
Max8925 ldo status should be determined by two factors: 1. power up/down sequence selection(LDOCTL[4:2]). 2. i2c enable bit(LDOCTL[0]). Max8925 ldo support two types of power up/down sequence: 1. flexible sequence(LDOCTL[4:2] = 0~6). 2. i2c sequence(LDOCTL[4:2] = 7). With flexible sequence selected, the ldo is enabled during power up by default. With i2c sequence selected, the ldo is controlled by the i2c enable bit(LDOCTL[0]). Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-03regulator: add regulator_bulk_force_disable functionDonggeun Kim
This patch allows consumers to forcibly disable multiple regulator clients in a single API call. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-02regulator: pass regulator_register of_node in fixed voltage driverRichard Zhao
regulator_get needs of_node to find right regulator. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-02regulator: Enable supply regulator if child rail is enabled.Laxman Dewangan
During regulator_register, the rail is set on the provided machine constraints and if it is enabled then it is also require to enable the supply regulator. This will make sure that: 1. Proper reference count for supply regulator to be maintain. 2. Supply regulator should be enable when given rail is enabled. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-30regulator: mc13892: Convert to devm_kzalloc()Fabio Estevam
Convert mc13892-regulator driver to use devm_kzalloc(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-29regulator: mc13783: Convert to devm_kzalloc()Fabio Estevam
Convert mc13783-regulator driver to use devm_kzalloc(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-29regulator: Fix checking return value of create_regulatorAxel Lin
create_regulator() returns NULL on fail. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-29regulator: Fix the error handling if create_regulator failsAxel Lin
In the case of create_regulator() fails, goto the error path immediately. It does not make sense to update rdev->open_count if create_regulator fails. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-28regulator: Export regulator_is_supported_voltage()Mark Brown
It's part of the driver interface so should be available to modules. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-22regulator: mc13892: add device tree probe supportShawn Guo
It adds device tree probe support for mc13892-regulator driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-22regulator: mc13892: remove the unnecessary prefix from regulator nameShawn Guo
It's not really necessary to add a prefix 'MC13892__' for each mc13892 regulator name, since the chip must have been identified as mc13892 when we look at the regulator name. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20regulator: Convert wm831x regulator drivers to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20regulator: da9052: Staticize non-exported symbolsAxel Lin
da9052_regulator_info and da9053_regulator_info are not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17regulator: Replace kzalloc with devm_kzalloc and if-else with a switch-case ↵Ashish Jangam
for da9052-regulator Reported-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15regulator: Update da9052-regulator for DT changesMark Brown
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15regulator: DA9052/53 Regulator supportAshish Jangam
The Dialog PMIC has below featured regulators:- DA9052-BC - 4 DVS Buck converters 0.5V - 3.6V upto 1Amp. DA9053-AA/BX - 4 DVS Buck converters 0.5V - 2.5V upto 3Amp. DA9052/53 - 10 Programmable LDO's High PSSR, 1% accuracy. This patch support all the DA9052 and Da9053 regulators. The output voltages are fully programmable via I2C or SPI interface. The platform data with regulation constraints is passed down from the board to the regulator. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-05Merge branch 'topic/dt' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-next
2011-12-05regulator: pass device_node to of_get_regulator_init_data()Shawn Guo
It's not always true that the device_node of regulator can be found at dev->of_node at the time when of_get_regulator_init_data() is being called, because in some cases the regulator nodes in device tree do not have 'struct device' behind them until regulator_dev gets created for it by core function regulator_register(). The patch adds device_node as a new parameter to of_get_regulator_init_data(), so that caller can pass in the node of regulator directly. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-05regulator: If a single voltage is set with device tree then set apply_uVMark Brown
Otherwise there is no way in the bindings to configure a fixed voltage via software. It seems reasonable to assume that if the binding explicitly specifies a voltage we want to actually use that voltage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-30regulator: Allow regulators to register with no init_dataMark Brown
This allows read-only access to the device configuration which may be useful for diagnostics. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-11-28Merge remote-tracking branches 'regulator/topic/dt' and ↵Mark Brown
'regulator/for-linus' into regulator-next
2011-11-28regulator: twl: fix twl4030 support for smps regulatorsTero Kristo
SMPS regulator voltage control differs from the one of the LDO ones. Current TWL code was using LDO regulator ops for controlling the SMPS regulators, which fails. This was fixed fixed by adding separate regulator type which uses correct logic and calculations for the voltage levels. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-28Merge remote-tracking branch 'regulator/for-linus' into regulator-nextMark Brown
2011-11-28regulator: fix use after free bugLothar Waßmann
This is caused by dereferencing 'rdev' after device_unregister() in the regulator_unregister() function. 'rdev' is freed by device_unregister(), so it must not be dereferenced after this call. [Edited commit message for legibility -- broonie] Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28Merge remote-tracking branch 'regulator/for-linus' into regulator-nextMark Brown
2011-11-28regulator: Convert virtual and userspace regulator consumer drivers to use ↵Axel Lin
module_platform_driver() This patch converts virtual and userspace regulator consumer drivers to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28regulator: aat2870: Remove a redundant bitwise and operationAxel Lin
The implementation in aat2870_update() already did the bitwise and operation against mask parameter. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28regulator: aat2870: Fix the logic of checking if no id is matched in ↵Axel Lin
aat2870_get_regulator In current implementation, the pointer ri is not NULL if no id is matched. Fix it by checking i == ARRAY_SIZE(aat2870_regulators) if no id is matched. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-27Merge remote-tracking branch 'regulator/topic/dt' into regulator-nextMark Brown
2011-11-27regulator: Avoid potential NULL dereference in reg_fixed_voltage_probe()Axel Lin
of_get_fixed_voltage_config() may return NULL, return -ENOMEM in this case so we don't dereference NULL pointer. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-27Merge remote-tracking branch 'regulator/topic/dt' into regulator-nextMark Brown
2011-11-27regulator: Staticise of_get_fixed_voltage_config()Axel Lin
It is not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-27regulator: Checking return value of of_get_regulator_init_dataAxel Lin
of_get_regulator_init_data() may return NULL, thus check the return value to avoid NULL pointer dereference. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-27regulator: export of_get_regulator_init_dataAxel Lin
of_get_regulator_init_data is called in drivers/regulator/fixed.c which could be a module. Export of_get_regulator_init_data to fix below build error: ERROR: "of_get_regulator_init_data" [drivers/regulator/fixed.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-24Merge remote-tracking branch 'regulator/topic/dt' into regulator-nextMark Brown
2011-11-24regulator: Fix compile break due to missing arguments to regulator_registerRajendra Nayak
The commit 2c043bcbf287 ("regulator: pass additional of_node to regulator_register()") caused a compile break because it missed updating the regulator_register() call in gpio-regulator.c with the additional parameter (NULL). The compile break as reported by Stephen Rothwell with the x86_64 allmodconfig looked like this drivers/regulator/gpio-regulator.c: In function 'gpio_regulator_probe': drivers/regulator/gpio-regulator.c:287:8: error: too few arguments to function 'regulator_register' include/linux/regulator/driver.h:215:23: note: declared here Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23Merge remote-tracking branch 'regulator/topic/dt' into regulator-nextMark Brown
2011-11-23Merge branch 'for-linus' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-next
2011-11-23regulator: map consumer regulator based on device treeRajendra Nayak
Device nodes in DT can associate themselves with one or more regulators/supply by providing a list of phandles (to regulator nodes) and corresponding supply names. For Example: devicenode: node@0x0 { ... ... vmmc-supply = <&regulator1>; vpll-supply = <&regulator2>; }; The driver would then do a regulator_get(dev, "vmmc"); to get regulator1 and do a regulator_get(dev, "vpll"); to get regulator2. of_get_regulator() extracts the regulator node for a given device, based on the supply name. Use it to look up the regulator for a given consumer from device tree, during a regulator_get(). If not found fallback and lookup through the regulator_map_list instead. Also, since the regulator dt nodes can use the same binding to associate with a parent regulator/supply, allow the drivers to specify a supply_name, which can then be used to lookup dt to find the parent phandle. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23regulator: pass additional of_node to regulator_register()Rajendra Nayak
With device tree support for regulators, its needed that the regulator_dev->dev device has the right of_node attached. To be able to do this add an additional parameter to the regulator_register() api, wherein the dt-adapted driver can then pass this additional info onto the regulator core. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23regulator: adapt fixed regulator driver to dtRajendra Nayak
The fixed regulator driver uses of_get_fixed_voltage_config() to extract fixed_voltage_config structure contents from device tree. Also add documenation for additional bindings for fixed regulators that can be passed through dt. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23regulator: helper routine to extract regulator_init_dataRajendra Nayak
The helper routine is meant to be used by the regulator drivers to extract the regulator_init_data structure from the data that is passed from device tree. 'consumer_supplies' which is part of regulator_init_data is not extracted as the regulator consumer mappings are passed through DT differently, implemented in subsequent patches. Similarly the regulator<-->parent/supply mapping is handled in subsequent patches. Also add documentation for regulator bindings to be used to pass regulator_init_data struct information from device tree. Some of the regulator properties which are linux and board specific, are left out since its not clear if they can be in someway embedded into the kernel or passed in from DT. They will be revisited later. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23regulator: TPS65910: Fix VDD1/2 voltage selector countAfzal Mohammed
Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-07 07:20:52 +0000