summaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)Author
2009-07-29rtc: mark if rtc-cmos drivers were successfully registeredThadeu Lima de Souza Cascardo
rtc-cmos has two drivers, one PNP and one platform. When PNP has not succeeded probing, platform is registered. However, it tries to unregister both drivers unconditionally, instead of only unregistering those that were successfully registered. This causes runtime warnings to be emitted from the driver core code. Fix this with a boolean variable for each driver indicating whether registering was successful. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: David Brownell <david-b@pacbell.net> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Brownell <david-b@pacbell.net> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Cc: Ozan Caglayan <ozan@pardus.org.tr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06rtc: ds1374, fix lock imbalanceJiri Slaby
When i2c_smbus_read_byte_data fails in ds1374_work, we forgot to unlock the held lock. Fix that. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-03Update Yoichi Yuasa's e-mail addressYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-30bfin: delay IRQ registration until driver is readyMike Frysinger
Make sure we do not actually request the RTC IRQ until the device driver is fully ready to handle and process any interrupt. This way a spurious interrupt won't crash the system (which may happen if the bootloader was poking the RTC right before booting Linux). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19rtc: make rtc_update_irq callable with irqs enabledAtsushi Nemoto
The rtc_update_irq() might be called with irqs enabled, if a interrupt handler was registered without IRQF_DISABLED. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_lock/spin_unlock. Also update kerneldoc and drivers which do extra work to follow the current interface spec, as suggestted by David Brownell. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18rtc-ds1553: drop IRQF_SHAREDAtsushi Nemoto
IRQF_SHARED should not be used with IRQF_DISABLED. There is no in-tree user of this driver and only out-of-tree user I know uses a dedicated irq line for this RTC. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18rtc-tx4939: drop IRQF_SHAREDAtsushi Nemoto
IRQF_SHARED should not be used with IRQF_DISABLED. This RTC have a dedicated irq line to SoC's internal interrupt controller so there is no reason to use IRQF_SHARED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18rtc: add stand-alone driver for RX8025 chipWolfgang Grandegger
Add support for the Epson RX-8025SA/NB RTC chips. It includes support for alarms, periodic interrupts (1 Hz) and clock precision adjustment. For clock precision adjustment, the SYSFS file "clock_adjust_ppb" gets created in "/sys/class/rtc/rtcX/device". It permits to set and get the clock adjustment in ppb (parts per billion), e.g.: # echo -183000 > /sys/class/rtc/rtc0/device/clock_adjust_ppb # cat /sys/class/rtc/rtc0/device/clock_adjust_ppb -183000 This allows to compensate temperature dependent clock drifts. According to the RX8025 SA/NB application manual the frequency and temperature characteristics can be approximated using the following equation: df = a * (ut - t)**2 df: Frequency deviation in any temperature a : Coefficient = (-35 +-5) * 10**-9 ut: Ultimate temperature in degree = +25 +-5 degree t : Any temperature in degree Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18rtc: rtc-ds1307 add ds3231Wolfram Sang
Add ds3231 variant. For that, the BBSQI bit position was changed from a simple define into a lookup-array as it differs. This also removes writing to an unused bit in case of the ds1337. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18rtc: rtc-ds1307 add ds1388Joakim Tjernlund
Extend the ds1307 driver to support ds1388 too. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18rtc: rtc-ds1742 nvram attribute fixTorsten Ertbjerg Rasmussen
The RTC driver for ds1742 / ds1743 uses a static nvram attribute. This patch replaces this static attribute with one nvram attribute for each ds174x registered. The nvram size is not the same for all types of ds174x. The nvram size is accessible as the file size of the nvram attribute in sysfs. With only a single nvram attribute, this file size will be incorrect if more than one type of ds174x is present on a system. See the comment in the removed code below. This patch have been tested with linux-2.6.28 and linux-2.6.29-rc5/6 on a custom board with one ds1743. Signed-off-by: Torsten Ertbjerg Rasmussen <ertbjerg@gmail.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
2009-06-11[ARM] 5544/1: Trust PrimeCell resource sizesLinus Walleij
I found the PrimeCell/AMBA Bus drivers distrusting the resource passed in as part of the struct amba_device abstraction. This patch removes all hard coded resource sizes found in the PrimeCell drivers and move the responsibility of this definition back to the platform/board device definition, which already exist and appear to be correct for all in-tree users of these drivers. We do this using the resource_size() inline function which was also replicated in the only driver using the resource size, so that has been changed too. The KMI_SIZE was left in kmi.h in case someone likes it. Test-compiled against Versatile and Integrator defconfigs, seems to work but I don't posess these boards and cannot test them. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-29Merge branch 'for-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into devel
2009-05-23Merge branch 'ixp4xx' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 into devel
2009-05-22Merge branches 'sh/stable-updates' and 'sh/sparseirq'Paul Mundt
2009-05-20[ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *Alessandro Rubini
The second argument of the probe method points to the amba_id structure, so it's better passed with the correct type. None of the current in-tree drivers uses the pointer, so they have only been checked for a clean compile. Change suggested by Russell King. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-12rtc: rtc-twl4030 don't mask alarm interrupts on suspendKim Kyuwon
This patch enables the alarm interrupt of TWL4030 RTC to wake up the system from suspend. You can test this patch with following command. # echo +10 > /sys/class/rtc/rtc0/wakealarm; echo mem > /sys/power/state; Signed-off-by: Kim Kyuwon <q1.kim@samsung.com> Acked-by: David Brownell <david-b@pacbell.net> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27sh: rtc-generic support.Paul Mundt
This adds rtc-generic support for SUPERH32. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-26[ARM] 5452/1: ep93x: rtc: use ioremap'ed addressesHartley Sweeten
Update the rtc-ep93xx driver to use ioremap'ed addresses. This removes the dependency on <mach/hardware.h> and properly reports the memory addresses used by the driver in /proc/iomem. In addition, ep93xx_rtc_init() is updated to use platform_driver_probe() instead of platform_driver_register(). Also, the device_create_file() calls are now properly checked for error conditions. The created sysfs files are also now removed when the driver is removed. The version number for the driver has been bumped at the request of Alessandro Zummo. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-21rtc-cmos: fix printk outputKrzysztof Halasa
With no IRQ available/defined, RTC-CMOS driver prints something like: rtc0: alarms up to one no, y3k, 114 bytes nvram ^^^^ I guess the following is a bit easier to understand: rtc0: no alarms, y3k, 114 bytes nvram Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-16rtc: rtc-sh: clock framework support.Paul Mundt
This adds clock framework support to the rtc-sh driver. With this in place, platforms can default to leaving the clock disabled rather than placing it in the always enabled state. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: sh7785lcr: Map whole PCI address space. sh: Fix up DSP context save/restore. sh: Fix up number of on-chip DMA channels on SH7091. sh: update defconfigs. sh: Kill off broken direct-mapped cache mode. sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle. sh: Add a command line option for disabling I/O trapping. sh: Select ARCH_HIBERNATION_POSSIBLE. sh: migor: Fix up CEU use flags. input: migor_ts: add wakeup support rtc: rtc-sh: use set_irq_wake() input: sh_keysc: use enable/disable_irq_wake() sh: intc: set_irq_wake() support sh: intc: install enable, disable and shutdown callbacks clocksource: sh_cmt: use remove_irq() and remove clockevent workaround sh: ap325 and Migo-R use new sh_mobile_ceu_info flags sh: Fix up -Wformat-security whining. sh: ap325rxa: Add ov772x support, again. sh: Sanitize asm/mmu.h for assembly use. sh: Tidy up sh7786 pinmux table. ...
2009-04-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/rtc-pariscLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/rtc-parisc: powerpc/ps3: Add rtc-ps3 powerpc: Hook up rtc-generic, and kill rtc-ppc m68k: Hook up rtc-generic parisc: rtc: Rename rtc-parisc to rtc-generic parisc: rtc: Add missing module alias parisc: rtc: platform_driver_probe() fixups parisc: rtc: get_rtc_time() returns unsigned int
2009-04-02rtc: add m41t62 support to rtc-m41t80 driverDaniel Glockner
Compared to the other supported chips, the m41t62 uses a different register to set the square wave frequency. Signed-off-by: Daniel Glockner <dg@emlix.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02rtc-v3020: add ability to access v3020 chip with GPIOsMike Rapoport
The v3020 RTC can be connected to GPIOs as well as to memory-like interface. Add ability to use GPIO bit-bang for v3020 read-write access. [akpm@linux-foundation.org: fix off-by-one in error path] Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02rtc: rtc-sh: use set_irq_wake()Magnus Damm
Modify the sh_rtc driver to use set_irq_wake() during suspend and resume. These functions are used to enable the rtc interrupts in the interrupt controller so the rtc can be used to wakeup the system from suspend. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02powerpc/ps3: Add rtc-ps3Geert Uytterhoeven
Create a real RTC driver for PS3, and unhook the deprecated ppc_md.[gs]et_rtc_time. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-04-02powerpc: Hook up rtc-generic, and kill rtc-ppcGeert Uytterhoeven
PowerPC has been a long time user of the generic RTC abstraction, so hook up rtc-generic: - Create the "rtc-generic" platform device if ppc_md.get_rtc_time is set, - Kill rtc-ppc, as rtc-generic offers the same functionality in a more generic way, and supports autoloading through udev. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-04-02m68k: Hook up rtc-genericGeert Uytterhoeven
m68k has been a long time user of the generic RTC abstraction, so hook up rtc-generic: - Create the "rtc-generic" platform device if mach_hwclk is set, - Add checks for mach_hwclk, in anticipation of RTC chip drivers being moved to drivers/rtc/. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-04-02parisc: rtc: Rename rtc-parisc to rtc-genericGeert Uytterhoeven
The rtc-parisc driver is not PA-RISC specific at all, as it uses the existing (but deprecated) generic RTC infrastructure ([gs]et_rtc_time()). Rename the driver from rtc-parisc to rtc-generic. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-04-02parisc: rtc: Add missing module aliasGeert Uytterhoeven
Make udev autoload the driver Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-04-02parisc: rtc: platform_driver_probe() fixupsGeert Uytterhoeven
When using platform_driver_probe(), it's not needed to setup a .probe function, and .remove should be marked __exit_p(), not __devexit_p(). Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: dann frazier <dannf@hp.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-04-02parisc: rtc: get_rtc_time() returns unsigned intGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-04-01rtc: test before subtraction on unsignedRoel Kluin
new_alarm is unsigned so test before the subtraction. [akpm@linux-foundation.org: time-wrapping fix] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-v3020: coding style cleanupMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-wm8350: retries will reach -1Roel Kluin
With a postfix decrement retries will reach -1 rather than 0, so the warning and error-out will not occur. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc: add EPSON RX8025 support to DS1307 RTC driverMatthias Fuchs
Add support for the EPSON RX8025 RTC. The date/time registers of this chip are compatible with the DS1307. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-ds1307: true SMBus compatibilityEd Swierk
Allow the rtc-ds1307 driver to work with SMBus controllers like nforce2 that do not support i2c block transfers. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: BARRE Sebastien <sbarre@sdelcc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: rename p pointer to rtcdann frazier
Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: remove a couple unnecessary variablesdann frazier
Signed-off-by: dann frazier <dannf@hp.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: use platform_driver_probedann frazier
This isn't a hotpluggable device, so call platform_driver_probe directly in parisc_rtc_init Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: use rtc_valid_tm() in parisc_get_timedann frazier
Use the return value of rtc_valid_tm() instead of just returning 0. Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: remove struct parisc_rtcdann frazier
parisc_rtc now only includes an rtc_device pointer, so let's just use the rtc_device type directly. Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: remove redundant lockingdann frazier
The RTC subsystem proides ops locking, no need to implement our own Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: add a missing include for linux/rtc.hdann frazier
Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc: add platform driver for EFIdann frazier
Munge Stephane Eranian's efirtc.c code into an rtc platform driver [akpm@linux-foundation.org: use is_leap_year()] Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: stephane eranian <eranian@googlemail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc: convert LEAP_YEAR into an inlineAndrew Morton
- the LEAP_YEAR macro is buggy - it references its arg multiple times. Fix this by turning it into a C function. - give it a more approriate name - Move it to rtc.h so that other .c files can use it, instead of copying it. Cc: dann frazier <dannf@hp.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: stephane eranian <eranian@googlemail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc: convert wm8350 use new alarm and update operationsMark Brown
These are the only two ioctls so the ioctl() function is also removed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-31proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-01 23:29:58 +0000