summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2009-04-07dma-mapping: replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31)Yang Hongyang
Replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_39BIT_MASK macro with DMA_BIT_MASK(39)Yang Hongyang
Replace all DMA_39BIT_MASK macro with DMA_BIT_MASK(39) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_40BIT_MASK macro with DMA_BIT_MASK(40)Yang Hongyang
Replace all DMA_40BIT_MASK macro with DMA_BIT_MASK(40) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (74 commits) [SCSI] sg: fix q->queue_lock on scsi_error_handler path [SCSI] replace __inline with inline [SCSI] a2091: make 2 functions static [SCSI] a3000: make 2 functions static [SCSI] ses: #if 0 the unused ses_match_host() [SCSI] use kmem_cache_zalloc instead of kmem_cache_alloc/memset [SCSI] sg: fix iovec bugs introduced by the block layer conversion [SCSI] qlogicpti: use request_firmware [SCSI] advansys: use request_firmware [SCSI] qla1280: use request_firmware [SCSI] libiscsi: fix iscsi pool error path [SCSI] cxgb3i: call ddp release function directly [SCSI] cxgb3i: merge cxgb3i_ddp into cxgb3i module [SCSI] cxgb3i: close all tcp connections upon chip reset [SCSI] cxgb3i: re-read ddp settings information after chip reset [SCSI] cxgb3i: re-initialize ddp settings after chip reset [SCSI] cxgb3i: subscribe to error notification from cxgb3 driver [SCSI] aacraid driver update [SCSI] mptsas: remove unneeded check [SCSI] config: Make need for SCSI_CDROM clearer ...
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) trivial: Update my email address trivial: NULL noise: drivers/mtd/tests/mtd_*test.c trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h trivial: Fix misspelling of "Celsius". trivial: remove unused variable 'path' in alloc_file() trivial: fix a pdlfush -> pdflush typo in comment trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL trivial: wusb: Storage class should be before const qualifier trivial: drivers/char/bsr.c: Storage class should be before const qualifier trivial: h8300: Storage class should be before const qualifier trivial: fix where cgroup documentation is not correctly referred to trivial: Give the right path in Documentation example trivial: MTD: remove EOL from MODULE_DESCRIPTION trivial: Fix typo in bio_split()'s documentation trivial: PWM: fix of #endif comment trivial: fix typos/grammar errors in Kconfig texts trivial: Fix misspelling of firmware trivial: cgroups: documentation typo and spelling corrections trivial: Update contact info for Jochen Hein trivial: fix typo "resgister" -> "register" ...
2009-04-03[SCSI] sg: fix q->queue_lock on scsi_error_handler pathFUJITA Tomonori
sg_rq_end_io() is called via rq->end_io. In some rare cases, sg_rq_end_io calls blk_put_request/blk_rq_unmap_user (when a program issuing a command has gone before the command completion; e.g. by interrupting a program issuing a command before the command completes). We can't call blk_put_request/blk_rq_unmap_user in interrupt so the commit c96952ed7031e7c576ecf90cf95b8ec099d5295a uses execute_in_process_context(). The problem is that scsi_error_handler() calls rq->end_io too. We can't call blk_put_request/blk_rq_unmap_user too in this path (we hold q->queue_lock). To avoid the above problem, in these rare cases, this patch always uses schedule_work() instead of execute_in_process_context(). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] replace __inline with inlineHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] a2091: make 2 functions staticAdrian Bunk
a2091_{detect,release}() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] a3000: make 2 functions staticAdrian Bunk
a3000_{detect,release}() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] ses: #if 0 the unused ses_match_host()Adrian Bunk
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] use kmem_cache_zalloc instead of kmem_cache_alloc/memsetWei Yongjun
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] sg: fix iovec bugs introduced by the block layer conversionFUJITA Tomonori
- needs to use copy_from_user for iovec before passing it to blk_rq_map_user_iov(). - before the block layer conversion, if ->dxfer_len and sum of iovec disagrees, the shorter one wins. However, currently sg returns -EINVAL. This restores the old behavior. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] qlogicpti: use request_firmwareJaswinder Singh Rajput
Firmware blob is little endian Thanks to Stephen Rothwell for fixing typos Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] advansys: use request_firmwareJaswinder Singh Rajput
Firmware blob looks like this... __le32 checksum unsigned char data[] Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] qla1280: use request_firmwareJaswinder Singh Rajput
Firmware blob is little endian looks like this... unsigned char Version1 unsigned char Version2 unsigned char Version3 unsigned char Padding unsigned short start_address unsigned short data Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] libiscsi: fix iscsi pool error pathJean Delvare
Le lundi 30 mars 2009, Chris Wright a écrit : > q->queue could be ERR_PTR(-ENOMEM) which will break unwinding > on error. Make iscsi_pool_free more defensive. > Making the freeing of q->queue dependent on q->pool being set looks really weird (although it is correct at the moment. But this seems to be fixable in a much simpler way. With the benefit that only the error case is slowed down. In both cases we have a problem if q->queue contains an error value but it's not -ENOMEM. Apparently this can't happen today, but it doesn't feel right to assume this will always be true. Maybe it's the right time to fix this as well. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] cxgb3i: call ddp release function directlyMike Christie
cxgb3i_ddp_cleanup just calls ddp_release directly so there is no reason for the wrapper. This patch just renames ddp_release to cxgb3i_ddp_cleanup and removes the old wrapper function. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] cxgb3i: merge cxgb3i_ddp into cxgb3i moduleKaren Xie
- Merge cxgb3i_ddp.ko to cxgb3i.ko as there is no other users. - Bump the driver version up to 1.0.2. Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] cxgb3i: close all tcp connections upon chip resetKaren Xie
Keep track of offloaded tcp connections per adapter. Close all of the connections upon reset. Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] cxgb3i: re-read ddp settings information after chip resetMike Christie
Orignally from Karen Xie, but merge conflicts/errors fixed up by Mike Christie. Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] cxgb3i: re-initialize ddp settings after chip resetKaren Xie
Re-initialize the ddp settings after chip reset. It includes re-initialize the related registers and the ddp map. Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] cxgb3i: subscribe to error notification from cxgb3 driverKaren Xie
Add error notification handling function which is called during chip reset. Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] aacraid driver updateLeubner, Achim
changes: - set aac_cache=2 as default value to avoid performance problem (Novell bugzilla #469922) - Dell/PERC controller boot problem fixed (RedHat bugzilla #457552) - WWN flag added to fix SLES10 SP1/SP2 drive detection problems - 64-bit support changes - DECLARE_PCI_DEVICE_TABLE macro added - controller type changes Signed-off-by: Achim Leubner <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] config: Make need for SCSI_CDROM clearerAlan Cox
Mention ATAPI. We could insert an essay about libata and ide-scsi etc but the failure case is someone enables it which is just fine so keep it simple. (Revised text from suggestion by Matthew Wilcox) Closes #7736 Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] stex: update version to 4.6.0000.3Ed Lin
Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] stex: add new 6G controller supportEd Lin
This adds the support of a new SAS 6G controller (st_yel) Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] stex: use config struct for parameters of different controllersEd Lin
Use config struct (st_card_info) for parameters of different controllers Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] stex: add MSI supportEd Lin
This adds the MSI support (default 0=off) Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] stex: small code fixes and changesEd Lin
These are some small code fixes and changes, including: - use 64 bit when possible - remove some unnecessary code (in interrupt, queuecommand routine etc.) - code change for reset handler Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe, libfcoe: Add support for FIP. FCoE discovery and keep-alive.Joe Eykholt
FIP is the new standard way to discover Fibre-Channel Forwarders (FCFs) by sending solicitations and listening for advertisements from FCFs. It also provides for keep-alives and period advertisements so that both parties know they have connectivity. If the FCF loses connectivity to the storage fabric, it can send a Link Reset to inform the E_node. This version is also compatible with pre-FIP implementations, so no configured selection between FIP mode and non-FIP mode is required. We wait a couple seconds after sending the initial solicitation and then send an old-style FLOGI. If we receive any FIP frames, we use FIP only mode. If the old FLOGI receives a response, we disable FIP mode. After every reset or link up, this determination is repeated. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe, libfc: fix double fcoe_softc memory allocVasu Dev
The foce_softc mem was reserved by libfc_host_alloc as well as by fcoe_host_alloc. Removes one liner fcoe_host_alloc completely, instead directly calls libfc_host_alloc to alloc scsi_host with libfc for just one fcoe_softc as fcoe private data. Moves libfc_host_alloc to libfc.h since it is a libfc API, placed lport_priv API adjacent to libfc_host_alloc since this is related to scsi_host priv data. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: cleans up libfcoe.h and adds fcoe.h for fcoe moduleVasu Dev
Removes no where used several inline functions prefixed with skb_* and be16_to_cpu. Moves fcoe module specific func prototypes to fcoe.c from libfcoe.h, moved only need for build. Adds fcoe module header file fcoe.h and then moves fcoe module specific fcoe_percpu_s and fcoe_softc to fcoe.h from libfcoe.h. Moves all defines from fcoe.c to fcoe.h since now fcoe module has its own header file fcoe.h. [jejb: removed EXPORT_SYMBOL_GPL(fcoe_fc_crc) which caused a section mismatch] Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: moves common FCoE library API functions to libfcoe moduleVasu Dev
Moves these functions as-is from fcoe.c to libfcoe.c, since they're are common routines: - fcoe_wwn_from_mac - fcoe_libfc_config Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe, libfc: add libfcoe moduleVasu Dev
Just sets up build environment for libfcoe module towards a libfcoe library for libfc LLDs using FCoE as libfc transport. Common library code to libfcoe is added in next patch. Also, updated MODULE_LICENSE from "GPL" string to "GPL v2" for libfc, libfcoe and fcoe modules to accurately match the licenses. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: renames libfcoe.c to fcoe.c as the only fcoe module fileVasu Dev
Renames libfcoe.c to fcoe.c, fcoe.c becomes the only .c file for fcoe.ko. Also deleted "$Id: Makefile" from fcoe module Makefle. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: removes default sw transport code file fcoe_sw.cVasu Dev
Moves only required code from fcoe_sw.c to libfcoe.c towards having just one source file for fcoe module, this gets rid off default sw transport code in a separate fcoe_sw.c file. Very minor renaming along this move, dropped _sw_ or _SW_ use in names and replaced them by _if_ as a auxiliary interface functions. Now some of these funcs can be removed or merged with other func after fcoe transport is gone, but that should be in another patch to keep this patch simple. Now the libfcoe.c file name for fcoe module doesn't go along well, so the libfcoe.c file renaming to fcoe.c as the only single fcoe module file is done in next patch to keep this patch clean and small for review. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: removes fc_transport_fcoe.[ch] code filesVasu Dev
Remove unused fc_transport_fcoe.c and fc_transport_fcoe.h files. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: prep work to completely remove fc_transport_fcoe codeVasu Dev
The fcoe transport code was added for generic FCoE transport infrastructure to allow additional offload related module loading on demand, this is not required anymore after recently added different offload approach by having offload related func ops in netdev. This patch removes fcoe transport related code use, calls functions directly between existing libfcoe.c and fcoe_sw.c for now, for example fcoe_sw_destroy and fcoe_sw_create calling. The fcoe_sw.c and libfcoe.c code will be further consolidated in later patches and then also the default fcoe sw transport code file fcoe_sw.c will be completely removed. The fcoe transport code files are completely removed in next patch to keep this patch simple for reviewing. [This patch is an update to a previous patch. This update resolves a build error as well as fixes a defect related to not calling fc_release_transport().] Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: create/destroy fcoe Rx threads on CPU hotplug eventsRobert Love
This patch adds support for dynamically created Rx threads upon CPU hotplug events. There were existing synchronization problems that this patch attempts to resolve. The main problem had to do with fcoe_rcv() running in a different context than the hotplug notifications. This opened the possiblity that fcoe_rcv() would target a Rx thread for a skb. However, that thread could become NULL if the CPU was made offline. This patch uses the Rx queue's (a skb_queue) lock to protect the thread it's associated with and we use the 'thread' member of the fcoe_percpu_s to determine if the thread is ready to accept new skbs. The patch also attempts to do a better job of cleaning up, both if hotplug registration fails as well as when the module is removed. Contribution provided by Joe Eykholt <jeykholt@cisco.com> to fix incorrect use of __cpuinitdata. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: Use per-CPU kernel function for dev_stats instead of an arrayRobert Love
Remove the hotplug creation of dev_stats, we allocate for all possible CPUs now when we allocate the lport. v2: Durring the 2.6.30 merge window, before these patches were comitted, 'percpu_ptr' was renamed 'per_cpu_ptr'. This latest update updates this patch for the name change. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: Use percpu kernel funcs for struct fcoe_percpu_sRobert Love
Convert fcoe_percpu array to use the per-cpu variables that the kernel provides. Use the kernel's functions to access this structure. The cpu member of the fcoe_percpu_s is no longer needed, so this patch removes it too. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: Initialize all possilbe skb_queue(s) when module is loadedRobert Love
Currently the skb_queue is initialized every time the associated CPU goes online. This patch has libfcoe initializing the skb_queue for all possible CPUs when the module is loaded. This patch also re-orders some declarations in the fcoe_rcv() function so the structure declarations are grouped before the primitive declarations. Lastly, this patch converts all CPU indicies to use unsigned int since CPU indicies should not be negative. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] osd_uld: Remove creation of osd_scsi class symlinkBoaz Harrosh
Remove the creation of the symlink from the device to it's class. On modern systems this is already created by a udev rule and would WARN on load. On old systems it is not needed, none of the current osd user-mode tools use this link. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] libosd: fix blk_put_request called from within request_end_ioBoaz Harrosh
A fix for a very serious and stupid bug in osd_initiator. It used to call blk_put_request() regardless of if it was from the end_io callback or if called after a sync execution. It should call the unlocked version __blk_put_request() instead. Also fixed is the remove of _abort_unexecuted_bios hack, and use of blk_end_request(,-ERROR,) to deallocate half baked requests. I've audited the code and it should be safe. Reported and Tested-by: Xu Yang <onlyxuyang@qq.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fix recovered error handlingJames Bottomley
We have a problem with recovered error handling in that any command which goes down as BLOCK_PC but which returns a sense code of RECOVERED ERROR gets completed with -EIO. For actual SG_IO commands, this doesn't matter at all, since the error return code gets dropped in favour of req->errors which contain the SCSI completion code. However, if this command is part of the block system, then it will pay attention to the returned error code. In particularly if a SYNCHRONIZE CACHE from a barrier command completes with RECOVERED ERROR, the resulting -EIO on the barrier causes block to error the request and return it to the filesystem. Fix this by converting the -EIO for recovered error to zero, plus remove the printing of this from sd and sr so the message isn't double printed. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] aic7xxx: leaves timer running on init failureHannes Reinecke
aic79xx leaves timers inserted when ahd_init() (which inserts two timers at its very end) succeeds but ahd_pci_map_int() fails. In this case ahd->init_level gets incremented to 5 only when that function succeeds, but ahd_free() calls ahd_shutdown() only when ahd->init_level == 5, and ahd_shutdown() is where the timers get removed. Since the freeing of the IRQ is not controlled by ahd->init_level, we should increment init_level prior to calling ahd_pci_map_int(). Reported-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] qla2xxx: Update version number to 8.03.01-k1.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] qla2xxx: Get FLT address in dword format.Harish Zunjarrao
FLTDS provides FLT address in the byte address format, convert it to dword address for further use. Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>