summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2021-10-17scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"Colin Ian King
[ Upstream commit cced4c0ec7c06f5230a2958907a409c849762293 ] There are a couple of spelling mistakes in pr_info and pr_err messages. Fix them. Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-17scsi: ses: Fix unsigned comparison with less than zeroJiapeng Chong
[ Upstream commit dd689ed5aa905daf4ba4c99319a52aad6ea0a796 ] Fix the following coccicheck warning: ./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared with zero: result > 0. Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-09scsi: sd: Free scsi_disk device via put_device()Ming Lei
[ Upstream commit 265dfe8ebbabae7959060bd1c3f75c2473b697ed ] After a device is initialized via device_initialize() it should be freed via put_device(). sd_probe() currently gets this wrong, fix it up. Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-06scsi: iscsi: Adjust iface sysfs attr detectionBaokun Li
[ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ] ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call into the driver, we might not match and return that we don't want attr visible in sysfs. Found in code review. Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26scsi: core: Avoid printing an error if target_alloc() returns -ENXIOSreekanth Reddy
[ Upstream commit 70edd2e6f652f67d854981fd67f9ad0f1deaea92 ] Avoid printing a 'target allocation failed' error if the driver target_alloc() callback function returns -ENXIO. This return value indicates that the corresponding H:C:T:L entry is empty. Removing this error reduces the scan time if the user issues SCAN_WILD_CARD scan operation through sysfs parameter on a host with a lot of empty H:C:T:L entries. Avoiding the printk on -ENXIO matches the behavior of the other callback functions during scanning. Link: https://lore.kernel.org/r/20210726115402.1936-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()Harshvardhan Jha
[ Upstream commit 77541f78eadfe9fdb018a7b8b69f0f2af2cf4b82 ] The list_for_each_entry() iterator, "adapter" in this code, can never be NULL. If we exit the loop without finding the correct adapter then "adapter" points invalid memory that is an offset from the list head. This will eventually lead to memory corruption and presumably a kernel crash. Link: https://lore.kernel.org/r/20210708074642.23599-1-harshvardhan.jha@oracle.com Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-15scsi: sr: Return correct event when media event code is 3Li Manyi
[ Upstream commit 5c04243a56a7977185b00400e59ca7e108004faf ] Media event code 3 is defined in the MMC-6 spec as follows: "MediaRemoval: The media has been removed from the specified slot, and the Drive is unable to access the media without user intervention. This applies to media changers only." This indicated that treating the condition as an EJECT_REQUEST was appropriate. However, doing so had the unfortunate side-effect of causing the drive tray to be physically ejected on resume. Instead treat the event as a MEDIA_CHANGE request. Fixes: 7dd753ca59d6 ("scsi: sr: Return appropriate error code when disk is ejected") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213759 Link: https://lore.kernel.org/r/20210726114913.6760-1-limanyi@uniontech.com Signed-off-by: Li Manyi <limanyi@uniontech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28scsi: iscsi: Fix iface sysfs attr detectionMike Christie
[ Upstream commit e746f3451ec7f91dcc9fd67a631239c715850a34 ] A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when iscsi_iface_attr_is_visible tries to figure out the type by just checking the value, we can collide and return the wrong type. When we call into the driver we might not match and return that we don't want attr visible in sysfs. The patch fixes this by setting the type when we figure out what the param is. Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings") Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8Colin Ian King
[ Upstream commit 332a9dd1d86f1e7203fc7f0fd7e82f0b304200fe ] The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to a u64. In the event that the top bit of the u8 is set then all then all the upper 32 bits of the u64 end up as also being set because of the sign-extension. Fix this by casting the u8 values to a u64 before the 24 bit left shift. [ This dates back to 2002, I found the offending commit from the git history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git, commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ] Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unintended sign extension") Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()Christophe JAILLET
[ Upstream commit 030e4138d11fced3b831c2761e4cecf347bae99c ] If an error occurs after a pci_enable_pcie_error_reporting() call, it must be undone by a corresponding pci_disable_pcie_error_reporting() call, as already done in the remove function. Link: https://lore.kernel.org/r/77adb02cfea7f1364e5603ecf3930d8597ae356e.1623482155.git.christophe.jaillet@wanadoo.fr Fixes: 3567f36a09d1 ("[SCSI] be2iscsi: Fix AER handling in driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: iscsi: Add iscsi_cls_conn refcount helpersMike Christie
[ Upstream commit b1d19e8c92cfb0ded180ef3376c20e130414e067 ] There are a couple places where we could free the iscsi_cls_conn while it's still in use. This adds some helpers to get/put a refcount on the struct and converts an exiting user. Subsequent commits will then use the helpers to fix 2 bugs in the eh code. Link: https://lore.kernel.org/r/20210525181821.7617-11-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: lpfc: Fix "Unexpected timeout" error in direct attach topologyJames Smart
[ Upstream commit e30d55137edef47434c40d7570276a0846fe922c ] An 'unexpected timeout' message may be seen in a point-2-point topology. The message occurs when a PLOGI is received before the driver is notified of FLOGI completion. The FLOGI completion failure causes discovery to be triggered for a second time. The discovery timer is restarted but no new discovery activity is initiated, thus the timeout message eventually appears. In point-2-point, when discovery has progressed before the FLOGI completion is processed, it is not a failure. Add code to FLOGI completion to detect that discovery has progressed and exit the FLOGI handling (noop'ing it). Link: https://lore.kernel.org/r/20210514195559.119853-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: core: Retry I/O for Notify (Enable Spinup) Required errorQuat Le
commit 104739aca4488909175e9e31d5cd7d75b82a2046 upstream. If the device is power-cycled, it takes time for the initiator to transmit the periodic NOTIFY (ENABLE SPINUP) SAS primitive, and for the device to respond to the primitive to become ACTIVE. Retry the I/O request to allow the device time to become ACTIVE. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210629155826.48441-1-quat.le@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Quat Le <quat.le@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20scsi: mpt3sas: Fix error return value in _scsih_expander_add()Zhen Lei
[ Upstream commit d6c2ce435ffe23ef7f395ae76ec747414589db46 ] When an expander does not contain any 'phys', an appropriate error code -1 should be returned, as done elsewhere in this function. However, we currently do not explicitly assign this error code to 'rc'. As a result, 0 was incorrectly returned. Link: https://lore.kernel.org/r/20210514081300.6650-1-thunder.leizhen@huawei.com Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: FlashPoint: Rename si_flags fieldRandy Dunlap
[ Upstream commit 4d431153e751caa93f3b7e6f6313446974e92253 ] The BusLogic driver has build errors on ia64 due to a name collision (in the #included FlashPoint.c file). Rename the struct field in struct sccb_mgr_info from si_flags to si_mflags (manager flags) to mend the build. This is the first problem. There are 50+ others after this one: In file included from ../include/uapi/linux/signal.h:6, from ../include/linux/signal_types.h:10, from ../include/linux/sched.h:29, from ../include/linux/hardirq.h:9, from ../include/linux/interrupt.h:11, from ../drivers/scsi/BusLogic.c:27: ../arch/ia64/include/uapi/asm/siginfo.h:15:27: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token 15 | #define si_flags _sifields._sigfault._flags | ^ ../drivers/scsi/FlashPoint.c:43:6: note: in expansion of macro 'si_flags' 43 | u16 si_flags; | ^~~~~~~~ In file included from ../drivers/scsi/BusLogic.c:51: ../drivers/scsi/FlashPoint.c: In function 'FlashPoint_ProbeHostAdapter': ../drivers/scsi/FlashPoint.c:1076:11: error: 'struct sccb_mgr_info' has no member named '_sifields' 1076 | pCardInfo->si_flags = 0x0000; | ^~ ../drivers/scsi/FlashPoint.c:1079:12: error: 'struct sccb_mgr_info' has no member named '_sifields' Link: https://lore.kernel.org/r/20210529234857.6870-1-rdunlap@infradead.org Fixes: 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit.") Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.de> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Khalid Aziz <khalid@gonehiking.org> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-11scsi: sr: Return appropriate error code when disk is ejectedManYi Li
[ Upstream commit 7dd753ca59d6c8cc09aa1ed24f7657524803c7f3 ] Handle a reported media event code of 3. This indicates that the media has been removed from the drive and user intervention is required to proceed. Return DISK_EVENT_EJECT_REQUEST in that case. Link: https://lore.kernel.org/r/20210611094402.23884-1-limanyi@uniontech.com Signed-off-by: ManYi Li <limanyi@uniontech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-30scsi: core: Put .shost_dev in failure path if host state changes to RUNNINGMing Lei
[ Upstream commit 11714026c02d613c30a149c3f4c4a15047744529 ] scsi_host_dev_release() only frees dev_name when host state is SHOST_CREATED. After host state has changed to SHOST_RUNNING, scsi_host_dev_release() no longer cleans up. Fix this by doing a put_device(&shost->shost_dev) in the failure path when host state is SHOST_RUNNING. Move get_device(&shost->shost_gendev) before device_add(&shost->shost_dev) so that scsi_host_cls_release() can do a put on this reference. Link: https://lore.kernel.org/r/20210602133029.2864069-4-ming.lei@redhat.com Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.de> Reported-by: John Garry <john.garry@huawei.com> Tested-by: John Garry <john.garry@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16scsi: core: Only put parent device if host state differs from SHOST_CREATEDMing Lei
commit 1e0d4e6225996f05271de1ebcb1a7c9381af0b27 upstream. get_device(shost->shost_gendev.parent) is called after host state has switched to SHOST_RUNNING. scsi_host_dev_release() shouldn't release the parent device if host state is still SHOST_CREATED. Link: https://lore.kernel.org/r/20210602133029.2864069-5-ming.lei@redhat.com Cc: Bart Van Assche <bvanassche@acm.org> Cc: John Garry <john.garry@huawei.com> Cc: Hannes Reinecke <hare@suse.de> Tested-by: John Garry <john.garry@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16scsi: target: qla2xxx: Wait for stop_phase1 at WWN removalDmitry Bogdanov
[ Upstream commit 2ef7665dfd88830f15415ba007c7c9a46be7acd8 ] Target de-configuration panics at high CPU load because TPGT and WWPN can be removed on separate threads. TPGT removal requests a reset HBA on a separate thread and waits for reset complete (phase1). Due to high CPU load that HBA reset can be delayed for some time. WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has already completed and thus tgt.tgt_ops is subsequently cleared. However, tgt.tgt_ops is needed to process incoming traffic and therefore this will cause one of the following panics: NIP qlt_reset+0x7c/0x220 [qla2xxx] LR qlt_reset+0x68/0x220 [qla2xxx] Call Trace: 0xc000003ffff63a78 (unreliable) qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx] qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx] qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx] qla83xx_msix_atio_q+0x54/0x90 [qla2xxx] or NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx] LR qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx] Call Trace: qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable) qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx] qla83xx_msix_atio_q+0x54/0x90 [qla2xxx] or NIP qlt_create_sess+0x90/0x4e0 [qla2xxx] LR qla24xx_do_nack_work+0xa8/0x180 [qla2xxx] Call Trace: 0xc0000000348fba30 (unreliable) qla24xx_do_nack_work+0xa8/0x180 [qla2xxx] qla2x00_do_work+0x674/0xbf0 [qla2xxx] qla2x00_iocb_work_fn The patch fixes the issue by serializing qlt_stop_phase1() and qlt_stop_phase2() functions to make WWPN removal wait for phase1 completion. Link: https://lore.kernel.org/r/20210415203554.27890-1-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16scsi: vmw_pvscsi: Set correct residual data lengthMatt Wang
[ Upstream commit e662502b3a782d479e67736a5a1c169a703d853a ] Some commands (such as INQUIRY) may return less data than the initiator requested. To avoid conducting useless information, set the right residual count to make upper layer aware of this. Before (INQUIRY PAGE 0xB0 with 128B buffer): $ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00 SCSI Status: Good Received 128 bytes of data: 00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............ 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@.... 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... ..... 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ After: $ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00 SCSI Status: Good Received 64 bytes of data: 00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............ 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@.... 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... ..... 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [mkp: clarified description] Link: https://lore.kernel.org/r/03C41093-B62E-43A2-913E-CFC92F1C70C3@vmware.com Signed-off-by: Matt Wang <wwentao@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-03scsi: libsas: Use _safe() loop in sas_resume_port()Dan Carpenter
[ Upstream commit 8c7e7b8486cda21269d393245883c5e4737d5ee7 ] If sas_notify_lldd_dev_found() fails then this code calls: sas_unregister_dev(port, dev); which removes "dev", our list iterator, from the list. This could lead to an endless loop. We need to use list_for_each_entry_safe(). Link: https://lore.kernel.org/r/YKUeq6gwfGcvvhty@mwanda Fixes: 303694eeee5e ("[SCSI] libsas: suspend / resume support") Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-03scsi: BusLogic: Fix 64-bit system enumeration error for BuslogicMatt Wang
[ Upstream commit 56f396146af278135c0ff958c79b5ee1bd22453d ] Commit 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit") introduced a serious issue for 64-bit systems. With this commit, 64-bit kernel will enumerate 8*15 non-existing disks. This is caused by the broken CCB structure. The change from u32 data to void *data increased CCB length on 64-bit system, which introduced an extra 4 byte offset of the CDB. This leads to incorrect response to INQUIRY commands during enumeration. Fix disk enumeration failure by reverting the portion of the commit above which switched the data pointer from u32 to void. Link: https://lore.kernel.org/r/C325637F-1166-4340-8F0F-3BCCD59D4D54@vmware.com Acked-by: Khalid Aziz <khalid@gonehiking.org> Signed-off-by: Matt Wang <wwentao@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()Zhen Lei
[ Upstream commit 5cb289bf2d7c34ca1abd794ce116c4f19185a1d4 ] Fix to return a negative error code from the error handling case instead of 0 as done elsewhere in this function. Link: https://lore.kernel.org/r/20210514090952.6715-1-thunder.leizhen@huawei.com Fixes: a9083016a531 ("[SCSI] qla2xxx: Add ISP82XX support.") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22scsi: sni_53c710: Add IRQ checkSergey Shtylyov
[ Upstream commit 1160d61bc51e87e509cfaf9da50a0060f67b6de4 ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #s), causing it to fail with -EINVAL (overridden by -ENODEV further below). Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/8f4b8fa5-8251-b977-70a1-9099bcb4bb17@omprussia.ru Fixes: c27d85f3f3c5 ("[SCSI] SNI RM 53c710 driver") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22scsi: sun3x_esp: Add IRQ checkSergey Shtylyov
[ Upstream commit 14b321380eb333c82853d7d612d0995f05f88fdc ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real error code. Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/363eb4c8-a3bf-4dc9-2a9e-90f349030a15@omprussia.ru Fixes: 0bb67f181834 ("[SCSI] sun3x_esp: convert to esp_scsi") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22scsi: jazz_esp: Add IRQ checkSergey Shtylyov
[ Upstream commit 38fca15c29db6ed06e894ac194502633e2a7d1fb ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real error code. Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/594aa9ae-2215-49f6-f73c-33bd38989912@omprussia.ru Fixes: 352e921f0dd4 ("[SCSI] jazz_esp: converted to use esp_core") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22scsi: libfc: Fix a format specifierBart Van Assche
[ Upstream commit 90d6697810f06aceea9de71ad836a8c7669789cd ] Since the 'mfs' member has been declared as 'u32' in include/scsi/libfc.h, use the %u format specifier instead of %hu. This patch fixes the following clang compiler warning: warning: format specifies type 'unsigned short' but the argument has type 'u32' (aka 'unsigned int') [-Wformat] "lport->mfs:%hu\n", mfs, lport->mfs); ~~~ ^~~~~~~~~~ %u Link: https://lore.kernel.org/r/20210415220826.29438-8-bvanassche@acm.org Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO responseJames Smart
[ Upstream commit fffd18ec6579c2d9c72b212169259062fe747888 ] Fix a crash caused by a double put on the node when the driver completed an ACC for an unsolicted abort on the same node. The second put was executed by lpfc_nlp_not_used() and is wrong because the completion routine executes the nlp_put when the iocbq was released. Additionally, the driver is issuing a LOGO then immediately calls lpfc_nlp_set_state to put the node into NPR. This call does nothing. Remove the lpfc_nlp_not_used call and additional set_state in the completion routine. Remove the lpfc_nlp_set_state post issue_logo. Isn't necessary. Link: https://lore.kernel.org/r/20210412013127.2387-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-28scsi: libsas: Reset num_scatter if libata marks qc as NODATAJolly Shah
commit 176ddd89171ddcf661862d90c5d257877f7326d6 upstream. When the cache_type for the SCSI device is changed, the SCSI layer issues a MODE_SELECT command. The caching mode details are communicated via a request buffer associated with the SCSI command with data direction set as DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata layer, as a part of generic initial setup, libata layer sets up the scatterlist for the command using the SCSI command (ata_scsi_qc_new()). This command is then translated by the libata layer into ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats this as a non-data command (ata_mselect_caching()), since it only needs an ATA taskfile to pass the caching on/off information to the device. It does not need the scatterlist that has been setup, so it does not perform dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it as a non-data command with a scatterlist. It cannot extract the correct DMA length since the scatterlist has not been mapped with dma_map_sg() for a DMA operation. When this partially constructed SAS task reaches pm80xx LLDD, it results in the following warning: "pm80xx_chip_sata_req 6058: The sg list address start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff end_addr_low=0xffffffff has crossed 4G boundary" Update libsas to handle ATA non-data commands separately so num_scatter and total_xfer_len remain 0. Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com Fixes: 53de092f47ff ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA") Tested-by: Luo Jiaxing <luojiaxing@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jolly Shah <jollys@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07scsi: qla2xxx: Fix broken #endif placementAlexey Dobriyan
[ Upstream commit 5999b9e5b1f8a2f5417b755130919b3ac96f5550 ] Only half of the file is under include guard because terminating #endif is placed too early. Link: https://lore.kernel.org/r/YE4snvoW1SuwcXAn@localhost.localdomain Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-07scsi: st: Fix a use after free in st_open()Lv Yunlong
[ Upstream commit c8c165dea4c8f5ad67b1240861e4f6c5395fa4ac ] In st_open(), if STp->in_use is true, STp will be freed by scsi_tape_put(). However, STp is still used by DEBC_printk() after. It is better to DEBC_printk() before scsi_tape_put(). Link: https://lore.kernel.org/r/20210311064636.10522-1-lyl2019@mail.ustc.edu.cn Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-24scsi: lpfc: Fix some error codes in debugfsDan Carpenter
commit 19f1bc7edf0f97186810e13a88f5b62069d89097 upstream. If copy_from_user() or kstrtoull() fail then the correct behavior is to return a negative error code. Link: https://lore.kernel.org/r/YEsbU/UxYypVrC7/@mwanda Fixes: f9bb2da11db8 ("[SCSI] lpfc 8.3.27: T10 additions for SLI4") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handlingMike Christie
[ Upstream commit d28d48c699779973ab9a3bd0e5acfa112bd4fdef ] If iscsi_prep_scsi_cmd_pdu() fails we try to add it back to the cmdqueue, but we leave it partially setup. We don't have functions that can undo the pdu and init task setup. We only have cleanup_task which can clean up both parts. So this has us just fail the cmd and go through the standard cleanup routine and then have the SCSI midlayer retry it like is done when it fails in the queuecommand path. Link: https://lore.kernel.org/r/20210207044608.27585-2-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07scsi: iscsi: Verify lengths on passthrough PDUsChris Leech
commit f9dbdf97a5bd92b1a49cee3d591b55b11fd7a6d5 upstream. Open-iSCSI sends passthrough PDUs over netlink, but the kernel should be verifying that the provided PDU header and data lengths fall within the netlink message to prevent accessing beyond that in memory. Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07scsi: iscsi: Ensure sysfs attributes are limited to PAGE_SIZEChris Leech
commit ec98ea7070e94cc25a422ec97d1421e28d97b7ee upstream. As the iSCSI parameters are exported back through sysfs, it should be enforcing that they never are more than PAGE_SIZE (which should be more than enough) before accepting updates through netlink. Change all iSCSI sysfs attributes to use sysfs_emit(). Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07scsi: iscsi: Restrict sessions and handles to admin capabilitiesLee Duncan
commit 688e8128b7a92df982709a4137ea4588d16f24aa upstream. Protect the iSCSI transport handle, available in sysfs, by requiring CAP_SYS_ADMIN to read it. Also protect the netlink socket by restricting reception of messages to ones sent with CAP_SYS_ADMIN. This disables normal users from being able to end arbitrary iSCSI sessions. Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Chris Leech <cleech@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-03block: Move SECTOR_SIZE and SECTOR_SHIFT definitions into <linux/blkdev.h>Bart Van Assche
commit 233bde21aa43516baa013ef7ac33f3427056db3e upstream. It happens often while I'm preparing a patch for a block driver that I'm wondering: is a definition of SECTOR_SIZE and/or SECTOR_SHIFT available for this driver? Do I have to introduce definitions of these constants before I can use these constants? To avoid this confusion, move the existing definitions of SECTOR_SIZE and SECTOR_SHIFT into the <linux/blkdev.h> header file such that these become available for all block drivers. Make the SECTOR_SIZE definition in the uapi msdos_fs.h header file conditional to avoid that including that header file after <linux/blkdev.h> causes the compiler to complain about a SECTOR_SIZE redefinition. Note: the SECTOR_SIZE / SECTOR_SHIFT / SECTOR_BITS definitions have not been removed from uapi header files nor from NAND drivers in which these constants are used for another purpose than converting block layer offsets and sizes into a number of sectors. Cc: David S. Miller <davem@davemloft.net> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-03scsi: bnx2fc: Fix Kconfig warning & CNIC build errorsRandy Dunlap
[ Upstream commit eefb816acb0162e94a85a857f3a55148f671d5a5 ] CNIC depends on MMU, but since 'select' does not follow any dependency chains, SCSI_BNX2X_FCOE also needs to depend on MMU, so that erroneous configs are not generated, which cause build errors in cnic. WARNING: unmet direct dependencies detected for CNIC Depends on [n]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=n] || IPV6 [=n]=n) && MMU [=n] Selected by [y]: - SCSI_BNX2X_FCOE [=y] && SCSI_LOWLEVEL [=y] && SCSI [=y] && PCI [=y] && (IPV6 [=n] || IPV6 [=n]=n) && LIBFC [=y] && LIBFCOE [=y] riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L154': cnic.c:(.text+0x1094): undefined reference to `uio_event_notify' riscv64-linux-ld: cnic.c:(.text+0x10bc): undefined reference to `uio_event_notify' riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L1442': cnic.c:(.text+0x96a8): undefined reference to `__uio_register_device' riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L0 ': cnic.c:(.text.unlikely+0x68): undefined reference to `uio_unregister_device' Link: https://lore.kernel.org/r/20210213192428.22537-1-rdunlap@infradead.org Fixes: 853e2bd2103a ("[SCSI] bnx2fc: Broadcom FCoE offload driver") Cc: Saurav Kashyap <skashyap@marvell.com> Cc: Javed Hasan <jhasan@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-23scsi: qla2xxx: Fix crash during driver load on big endian machinesArun Easi
commit 8de309e7299a00b3045fb274f82b326f356404f0 upstream Crash stack: [576544.715489] Unable to handle kernel paging request for data at address 0xd00000000f970000 [576544.715497] Faulting instruction address: 0xd00000000f880f64 [576544.715503] Oops: Kernel access of bad area, sig: 11 [#1] [576544.715506] SMP NR_CPUS=2048 NUMA pSeries : [576544.715703] NIP [d00000000f880f64] .qla27xx_fwdt_template_valid+0x94/0x100 [qla2xxx] [576544.715722] LR [d00000000f7952dc] .qla24xx_load_risc_flash+0x2fc/0x590 [qla2xxx] [576544.715726] Call Trace: [576544.715731] [c0000004d0ffb000] [c0000006fe02c350] 0xc0000006fe02c350 (unreliable) [576544.715750] [c0000004d0ffb080] [d00000000f7952dc] .qla24xx_load_risc_flash+0x2fc/0x590 [qla2xxx] [576544.715770] [c0000004d0ffb170] [d00000000f7aa034] .qla81xx_load_risc+0x84/0x1a0 [qla2xxx] [576544.715789] [c0000004d0ffb210] [d00000000f79f7c8] .qla2x00_setup_chip+0xc8/0x910 [qla2xxx] [576544.715808] [c0000004d0ffb300] [d00000000f7a631c] .qla2x00_initialize_adapter+0x4dc/0xb00 [qla2xxx] [576544.715826] [c0000004d0ffb3e0] [d00000000f78ce28] .qla2x00_probe_one+0xf08/0x2200 [qla2xxx] Link: https://lore.kernel.org/r/20201202132312.19966-8-njavali@marvell.com Fixes: f73cb695d3ec ("[SCSI] qla2xxx: Add support for ISP2071.") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10scsi: ibmvfc: Set default timeout to avoid crash during migrationBrian King
[ Upstream commit 764907293edc1af7ac857389af9dc858944f53dc ] While testing live partition mobility, we have observed occasional crashes of the Linux partition. What we've seen is that during the live migration, for specific configurations with large amounts of memory, slow network links, and workloads that are changing memory a lot, the partition can end up being suspended for 30 seconds or longer. This resulted in the following scenario: CPU 0 CPU 1 ------------------------------- ---------------------------------- scsi_queue_rq migration_store -> blk_mq_start_request -> rtas_ibm_suspend_me -> blk_add_timer -> on_each_cpu(rtas_percpu_suspend_me _______________________________________V | V -> IPI from CPU 1 -> rtas_percpu_suspend_me -> __rtas_suspend_last_cpu -- Linux partition suspended for > 30 seconds -- -> for_each_online_cpu(cpu) plpar_hcall_norets(H_PROD -> scsi_dispatch_cmd -> scsi_times_out -> scsi_abort_command -> queue_delayed_work -> ibmvfc_queuecommand_lck -> ibmvfc_send_event -> ibmvfc_send_crq - returns H_CLOSED <- returns SCSI_MLQUEUE_HOST_BUSY -> __blk_mq_requeue_request -> scmd_eh_abort_handler -> scsi_try_to_abort_cmd - returns SUCCESS -> scsi_queue_insert Normally, the SCMD_STATE_COMPLETE bit would protect against the command completion and the timeout, but that doesn't work here, since we don't check that at all in the SCSI_MLQUEUE_HOST_BUSY path. In this case we end up calling scsi_queue_insert on a request that has already been queued, or possibly even freed, and we crash. The patch below simply increases the default I/O timeout to avoid this race condition. This is also the timeout value that nearly all IBM SAN storage recommends setting as the default value. Link: https://lore.kernel.org/r/1610463998-19791-1-git-send-email-brking@linux.vnet.ibm.com Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-10scsi: libfc: Avoid invoking response handler twice if ep is already completedJaved Hasan
[ Upstream commit b2b0f16fa65e910a3ec8771206bb49ee87a54ac5 ] A race condition exists between the response handler getting called because of exchange_mgr_reset() (which clears out all the active XIDs) and the response we get via an interrupt. Sequence of events: rport ba0200: Port timeout, state PLOGI rport ba0200: Port entered PLOGI state from PLOGI state xid 1052: Exchange timer armed : 20000 msecs  xid timer armed here rport ba0200: Received LOGO request while in state PLOGI rport ba0200: Delete port rport ba0200: work event 3 rport ba0200: lld callback ev 3 bnx2fc: rport_event_hdlr: event = 3, port_id = 0xba0200 bnx2fc: ba0200 - rport not created Yet!! /* Here we reset any outstanding exchanges before freeing rport using the exch_mgr_reset() */ xid 1052: Exchange timer canceled /* Here we got two responses for one xid */ xid 1052: invoking resp(), esb 20000000 state 3 xid 1052: invoking resp(), esb 20000000 state 3 xid 1052: fc_rport_plogi_resp() : ep->resp_active 2 xid 1052: fc_rport_plogi_resp() : ep->resp_active 2 Skip the response if the exchange is already completed. Link: https://lore.kernel.org/r/20201215194731.2326-1-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30scsi: ufs: Correct the LUN used in eh_device_reset_handler() callbackCan Guo
[ Upstream commit 35fc4cd34426c242ab015ef280853b7bff101f48 ] Users can initiate resets to specific SCSI device/target/host through IOCTL. When this happens, the SCSI cmd passed to eh_device/target/host _reset_handler() callbacks is initialized with a request whose tag is -1. In this case it is not right for eh_device_reset_handler() callback to count on the LUN get from hba->lrb[-1]. Fix it by getting LUN from the SCSI device associated with the SCSI cmd. Link: https://lore.kernel.org/r/1609157080-26283-1-git-send-email-cang@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29scsi: fnic: Fix error return code in fnic_probe()Zhang Changzhong
[ Upstream commit d4fc94fe65578738ded138e9fce043db6bfc3241 ] Return a negative error code from the error handling case instead of 0 as done elsewhere in this function. Link: https://lore.kernel.org/r/1607068060-31203-1-git-send-email-zhangchangzhong@huawei.com Fixes: 5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29scsi: pm80xx: Fix error return in pm8001_pci_probe()Zhang Qilong
[ Upstream commit 97031ccffa4f62728602bfea8439dd045cd3aeb2 ] The driver did not return an error in the case where pm8001_configure_phy_settings() failed. Use rc to store the return value of pm8001_configure_phy_settings(). Link: https://lore.kernel.org/r/20201205115551.2079471-1-zhangqilong3@huawei.com Fixes: 279094079a44 ("[SCSI] pm80xx: Phy settings support for motherboard controller.") Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29scsi: bnx2i: Requires MMURandy Dunlap
[ Upstream commit 2d586494c4a001312650f0b919d534e429dd1e09 ] The SCSI_BNX2_ISCSI kconfig symbol selects CNIC and CNIC selects UIO, which depends on MMU. Since 'select' does not follow dependency chains, add the same MMU dependency to SCSI_BNX2_ISCSI. Quietens this kconfig warning: WARNING: unmet direct dependencies detected for CNIC Depends on [n]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n) && MMU [=n] Selected by [m]: - SCSI_BNX2_ISCSI [=m] && SCSI_LOWLEVEL [=y] && SCSI [=y] && NET [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n) Link: https://lore.kernel.org/r/20201129070916.3919-1-rdunlap@infradead.org Fixes: cf4e6363859d ("[SCSI] bnx2i: Add bnx2i iSCSI driver.") Cc: linux-scsi@vger.kernel.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Manish Rangankar <mrangankar@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-02scsi: ufs: Fix race between shutdown and runtime resume flowStanley Chu
[ Upstream commit e92643db514803c2c87d72caf5950b4c0a8faf4a ] If UFS host device is in runtime-suspended state while UFS shutdown callback is invoked, UFS device shall be resumed for register accesses. Currently only UFS local runtime resume function will be invoked to wake up the host. This is not enough because if someone triggers runtime resume from block layer, then race may happen between shutdown and runtime resume flow, and finally lead to unlocked register access. To fix this, in ufshcd_shutdown(), use pm_runtime_get_sync() instead of resuming UFS device by ufshcd_runtime_resume() "internally" to let runtime PM framework manage the whole resume flow. Link: https://lore.kernel.org/r/20201119062916.12931-1-stanley.chu@mediatek.com Fixes: 57d104c153d3 ("ufs: add UFS power management support") Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-02scsi: libiscsi: Fix NOP race conditionLee Duncan
[ Upstream commit fe0a8a95e7134d0b44cd407bc0085b9ba8d8fe31 ] iSCSI NOPs are sometimes "lost", mistakenly sent to the user-land iscsid daemon instead of handled in the kernel, as they should be, resulting in a message from the daemon like: iscsid: Got nop in, but kernel supports nop handling. This can occur because of the new forward- and back-locks, and the fact that an iSCSI NOP response can occur before processing of the NOP send is complete. This can result in "conn->ping_task" being NULL in iscsi_nop_out_rsp(), when the pointer is actually in the process of being set. To work around this, we add a new state to the "ping_task" pointer. In addition to NULL (not assigned) and a pointer (assigned), we add the state "being set", which is signaled with an INVALID pointer (using "-1"). Link: https://lore.kernel.org/r/20201106193317.16993-1-leeman.duncan@gmail.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10scsi: core: Don't start concurrent async scan on same hostMing Lei
[ Upstream commit 831e3405c2a344018a18fcc2665acc5a38c3a707 ] The current scanning mechanism is supposed to fall back to a synchronous host scan if an asynchronous scan is in progress. However, this rule isn't strictly respected, scsi_prep_async_scan() doesn't hold scan_mutex when checking shost->async_scan. When scsi_scan_host() is called concurrently, two async scans on same host can be started and a hang in do_scan_async() is observed. Fixes this issue by checking & setting shost->async_scan atomically with shost->scan_mutex. Link: https://lore.kernel.org/r/20201010032539.426615-1-ming.lei@redhat.com Cc: Christoph Hellwig <hch@lst.de> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: ibmvfc: Fix error return in ibmvfc_probe()Jing Xiangfeng
[ Upstream commit 5e48a084f4e824e1b624d3fd7ddcf53d2ba69e53 ] Fix to return error code PTR_ERR() from the error handling case instead of 0. Link: https://lore.kernel.org/r/20200907083949.154251-1-jingxiangfeng@huawei.com Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: mvumi: Fix error return in mvumi_io_attach()Jing Xiangfeng
[ Upstream commit 055f15ab2cb4a5cbc4c0a775ef3d0066e0fa9b34 ] Return PTR_ERR() from the error handling case instead of 0. Link: https://lore.kernel.org/r/20200910123848.93649-1-jingxiangfeng@huawei.com Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-21 09:17:34 +0000