summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2012-08-01Merge branch 'dmaengine' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM DMA engine updates from Russell King: "This looks scary at first glance, but what it is is: - a rework of the sa11x0 DMA engine driver merged during the previous cycle, to extract a common set of helper functions for DMA engine implementations. - conversion of amba-pl08x.c to use these helper functions. - addition of OMAP DMA engine driver (using these helper functions), and conversion of some of the OMAP DMA users to use DMA engine. Nothing in the helper functions is ARM specific, so I hope that other implementations can consolidate some of their code by making use of these helpers. This has been sitting in linux-next most of the merge cycle, and has been tested by several OMAP folk. I've tested it on sa11x0 platforms, and given it my best shot on my broken platforms which have the amba-pl08x controller. The last point is the addition to feature-removal-schedule.txt, which will have a merge conflict. Between myself and TI, we're planning to remove the old TI DMA implementation next year." Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt and drivers/dma/{Kconfig,Makefile} * 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits) ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails Add feature removal of old OMAP private DMA implementation mtd: omap2: remove private DMA API implementation mtd: omap2: add DMA engine support spi: omap2-mcspi: remove private DMA API implementation spi: omap2-mcspi: add DMA engine support ARM: omap: remove mmc platform data dma_mask and initialization mmc: omap: remove private DMA API implementation mmc: omap: add DMA engine support mmc: omap_hsmmc: remove private DMA API implementation mmc: omap_hsmmc: add DMA engine support dmaengine: omap: add support for cyclic DMA dmaengine: omap: add support for setting fi dmaengine: omap: add support for returning residue in tx_state method dmaengine: add OMAP DMA engine driver dmaengine: sa11x0-dma: add cyclic DMA support dmaengine: sa11x0-dma: fix DMA residue support dmaengine: PL08x: ensure all descriptors are freed when channel is released dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking ...
2012-07-31spi: omap2-mcspi: remove private DMA API implementationRussell King
Remove the private DMA API implementation from spi-omap2-mcspi.c, making it use entirely the DMA engine API. Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31spi: omap2-mcspi: add DMA engine supportRussell King
Add DMA engine support to the OMAP SPI driver. This supplements the private DMA API implementation contained within this driver, and the driver can be independently switched at build time between using DMA engine and the private DMA API for the transmit and receive sides. Tested-by: Shubhrajyoti <shubhrajyoti@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "More hardware support across the field including a bunch of device drivers. The highlight however really are further steps towards device tree. This has been sitting in -next for ages. All MIPS _defconfigs have been tested to boot or where I don't have hardware available, to at least build fine." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (77 commits) MIPS: Loongson 1B: Add defconfig MIPS: Loongson 1B: Add board support MIPS: Netlogic: early console fix MIPS: Netlogic: Fix indentation of smpboot.S MIPS: Netlogic: remove cpu_has_dc_aliases define for XLP MIPS: Netlogic: Remove unused pcibios_fixups MIPS: Netlogic: Add XLP SoC devices in FDT MIPS: Netlogic: Add IRQ mappings for more devices MIPS: Netlogic: USB support for XLP MIPS: Netlogic: XLP PCIe controller support. MIPS: Netlogic: Platform changes for XLR/XLS I2C MIPS: Netlogic: Platform NAND/NOR flash support MIPS: Netlogic: Platform changes for XLS USB MIPS: Netlogic: Remove NETLOGIC_ prefix MIPS: Netlogic: SMP wakeup code update MIPS: Netlogic: Update comments in smpboot.S MIPS: BCM63XX: Add 96328avng reference board MIPS: Expose PCIe drivers for MIPS MIPS: BCM63XX: Add PCIe Support for BCM6328 MIPS: BCM63XX: Move the PCI initialization into its own function ...
2012-07-26Merge tag 'spi-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi updates from Mark Brown: "Since Grant is even more specacularly busy than usual for the time being I've been collecting SPI patches for him for this release - probably things will revert back to Grant before the next release. There's nothing too exciting here, mostly it's simple driver specific stuff: - Add spi: to the modaliases of SPI devices to provide namespacing. - A driver for AD-FMCOMMS1-EBZ. - DT binding for Orion. - Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers. There may be a few more fixes I've missed, people keep sending me new things." * tag 'spi-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/orion: remove uneeded spi_info spi/bcm63xx: fix clock configuration selection spi/orion: add device tree binding spi/omap2: mark omap2_mcspi_master_setup as __devinit spi: omap2-mcspi: Fix the below warning spi: Add AD-FMCOMMS1-EBZ I2C-SPI bridge driver spi/imx: use gpio_is_valid to determine if a gpio is valid spi/imx: remove redundant config.speed_hz setting spi/gpio: start with CS non-active spi: tegra: use dmaengine based dma driver spi/pl022: cleanup pl022 header documentation spi/pl022: enable runtime PM spi/pl022: delete DB5500 support spi/pl022: disable port when unused spi: Add "spi:" prefix to modalias attribute of spi devices
2012-07-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu arch update from Greg Ungerer: "Quite a varied set of changes this time. - A little more merge cleanup, this time the assembler entry code. - New sub-architecture support for the ColdFire 5251/5253 and 5441x CPU families. - Specific clk support code for the ColdFire 520x and 532x CPU familes. - Refactoring of the ColdFire GPIO support. - PCI bus support for some ColdFire CPUS that have PCI hardware (54xx family). This showed up a few problems with ColdFire cache, allocating coherent memory and bi-directional DMA support. Fixes for those too." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits) m68k: allow PCI bus to be enabled for ColdFire m54xx CPUs m68k: add PCI bus code support for the ColdFire M54xx SoC family m68k: add IO access definitions to support PCI on ColdFire platforms m68k: add PCI bus support definitions for the ColdFire M54xx SoC family m68k: common PCI support definitions and code m68k: add support for DMA_BIDIRECTIONAL in dma support functions m68k: fix ColdFire clear cache operation m68k: use simpler dma_alloc_coherent() for ColdFire CPUs m68knommu: platform support for 8390 based ethernet used on some boards m68knommu: Add clk definitions for m532x. m68knommu: Add clk definitions for m520x. m68knommu: Add rtc device for m5441x. m68knommu: add definitions for the third interrupt controller on devices that don't have a third interrupt controller. m68knommu: Add support for the Coldfire m5441x. m68knommu: use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1 coldfire-qspi: Add support for the Coldfire 5251/5253. m68knommu: Add support for the Coldfire 5251/5253 m68knommu: refactor Coldfire GPIO not to require GPIOLIB, eliminate mcf_gpio_chips. m68k: merge the MMU and non-MMU versions of the entry.S code m68k: use jbsr to call functions instead of bsrl ...
2012-07-23Merge tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc clk changes from Arnd Bergmann: "Clock support is moving to the clk subsystem. These tegra, omap and imx changes are for code that is still platform specific and not (yet) part of that subsystem." Fix up conflicts in arch/arm/mach-{imx/clk-imx51-imx53.c,omap2/Makefile} * tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) ARM: imx: clk-imx31: Fix clock id for rnga driver ARM: imx: add missing item to the list of clock event modes ARM: i.MX5x CSPI: Fixed clock name for CSPI ARM: i.MX5x clocks: Fix GPT clocks ARM: i.MX5x clocks: Fix parent for PWM clocks ARM: i.MX5x clocks: Add EPIT support ARM: mx27: Reenable silicon version print ARM: clk-imx27: Fix rtc clock id ARM: tegra: Provide clock for only one PWM controller ARM: tegra: Fix PWM clock programming ARM: OMAP3+: clock33xx: Add AM33XX clock tree data ARM: OMAP3+: clock: Move common clksel_rate & clock data to common file ARM: tegra: dma: rename driver name for clock to "tegra-apbdma" ARM: tegra: Remove second instance of uart clk crypto: add clk_prepare/clk_unprepare ASoC: tegra: add clk_prepare/clk_unprepare staging: nvec: add clk_prepare/clk_unprepare spi/tegra: add clk_prepare/clk_unprepare Input: tegra-kbc - add clk_prepare/clk_unprepare USB: ehci-tegra: add clk_prepare/clk_unprepare ...
2012-07-23spi/orion: remove uneeded spi_infoMichael Walle
This was formerly used to store the tclk value. This is now discovered using the clk API, rather than pass it as platform data. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-23spi/bcm63xx: fix clock configuration selectionFlorian Fainelli
We are currently using an inferior or equal operator for comparing the transfer frequency with the clock frequency table. Because of this, we always end up selecting 20Mhz as a frequency, due to the inequality transfer hz <= 20 Mhz being always true. Fix this by reversing the inequality, which is how the comparison should be done. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-23SPI: MIPS: lantiq: add FALCON spi driverThomas Langer
The external bus unit (EBU) found on the FALCON SoC has spi emulation that is designed for serial flash access. This driver has only been tested with m25p80 type chips. The hardware has no support for other types of spi peripherals. Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> Signed-off-by: John Crispin <blogic@openwrt.org> Cc: spi-devel-general@lists.sourceforge.net Cc: linux-mips@linux-mips.org Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3844/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23spi/orion: add device tree bindingAndrew Lunn
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-22spi/omap2: mark omap2_mcspi_master_setup as __devinitArnd Bergmann
This warning recently appeared with omap2plus_defconfig: WARNING: drivers/spi/built-in.o(.devinit.text+0x3c4): Section mismatch in reference from the function omap2_mcspi_probe() to the function .init.text:omap2_mcspi_master_setup() The function __devinit omap2_mcspi_probe() references a function __init omap2_mcspi_master_setup(). If omap2_mcspi_master_setup is only used by omap2_mcspi_probe then annotate omap2_mcspi_master_setup with a matching annotation. The fix is obviously to mark the omap2_mcspi_master_setup function as __devinit, rather than __init. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-20spi: omap2-mcspi: Fix the below warningShubhrajyoti D
The dma_map and dma_unmap should have same parameter passed otherwise we get the below warn. ks8851 spi1.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000009f22] [ 2.066925] Modules linked in: [ 2.070312] [ 2.071929] [<c001c250>] (unwind_backtrace+0x0/0x130) from [<c0043d84>] (warn_slowpath_common+0x4c/0x64) [ 2.081909] [<c0043d84>] (warn_slowpath_common+0x4c/0x64) from [<c0043e30>] (warn_slowpath_fmt+0x30/0x40) [ 2.091949] [<c0043e30>] (warn_slowpath_fmt+0x30/0x40) from [<c0293824>] (check_unmap+0x6d0/0x7b0) [ 2.101348] [<c0293824>] (check_unmap+0x6d0/0x7b0) from [<c02939cc>] (debug_dma_unmap_page+0x64/0x70) [ 2.111053] [<c02939cc>] (debug_dma_unmap_page+0x64/0x70) from [<c03519a4>] (omap2_mcspi_txrx_dma+0x2d8/0x4fc) [ 2.121582] [<c03519a4>] (omap2_mcspi_txrx_dma+0x2d8/0x4fc) from [<c03524d8>] (omap2_mcspi_work.clone.4+0xf0/0x290) [ 2.132537] [<c03524d8>] (omap2_mcspi_work.clone.4+0xf0/0x290) from [<c0352900>] (omap2_mcspi_transfer_one_message+0x288/0x438) [ 2.144592] [<c0352900>] (omap2_mcspi_transfer_one_message+0x288/0x438) from [<c03503bc>] (spi_pump_messages+0x100/0x160) [ 2.156127] [<c03503bc>] (spi_pump_messages+0x100/0x160) from [<c006635c>] (kthread_worker_fn+0xac/0x180) [ 2.166168] [<c006635c>] (kthread_worker_fn+0xac/0x180) from [<c0066578>] (kthread+0x90/0x9c) [ 2.175140] [<c0066578>] (kthread+0x90/0x9c) from [<c00157fc>] (kernel_thread_exit+0x0/0x8) [ 2.183898] ---[ end trace d1830ce6e44292f2 ]--- Fix the warn by changing the unmap parameter. Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-20spi: Add AD-FMCOMMS1-EBZ I2C-SPI bridge driverLars-Peter Clausen
This patch adds support for the I2C-SPI bridge which can be found on the Analog Devices AD-FMCOMMS1-EBZ board. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-19spi/s3c64xx: Expand S3C64XX_SPI_{DE,}ACT macros at call sitesMark Brown
They have very few users and they're both just doing a single register write so the advantage of having the macro is a bit limited. An inline function might make sense but it's as easy to just do the writes directly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-19spi/s3c64xx: Convert to devm_request_and_ioremap()Mark Brown
Saves some error handling and a small amount of code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-19spi/s3c64xx: Put the /CS GPIO into output modeMark Brown
No call was being made by the GPIO driver to put the GPIO into output mode meaning that the calls to gpio_set_value() which were being done were not valid. A similar issue appears to exist with the DT GPIO requests but as they appear to be being used for pinmux it's less clear to me that we want to configure them. Without this fix Cragganmore systems can't talk to their SPI devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-19spi/s3c64xx: Fix handling of errors in gpio_request()Mark Brown
When gpio_request() fails the driver logged the failure but while it'd try to print an error code in the non-DT case it didn't pass the error code in so garbage would be logged and in the DT case the error wasn't logged. Further, in the non-DT case the error code was then overwritten with -EBUSY depriving the caller of information and breaking automatic probe deferral pushing back from the GPIO level. Also reformat the non-DT log message so it's not word wrapped and we can grep for it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16coldfire-qspi: Add support for the Coldfire 5251/5253.Steven King
The Coldfire 5251/5253 have a QSPI controller. Enable selection of the coldfire-qspi driver if the M525x is selected. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-13spi/imx: use gpio_is_valid to determine if a gpio is validHui Wang
Use gpio_is_valid() to replace "gpio >= 0" or "gpio < 0". Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-13spi/imx: remove redundant config.speed_hz settingHui Wang
The config.speed_hz is just setted at the two lines ahead of it, obviously we don't need to copy the code to set the config.speed_hz again. Remove it for a cleanup. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-13spi: s3c64xx: add device tree supportThomas Abraham
Add support for device based discovery. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13spi: s3c64xx: Remove the 'set_level' callback from controller dataThomas Abraham
The set_level callback in the controller data, which is used to configure the slave select line, cannot be supported when migrating the driver to device tree based discovery. Since all the platforms currently use gpio as the slave select line, this callback can be removed from the controller data and replaced with call to gpio_set_value in the driver. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: SAMSUNG: Remove pdev pointer parameter from spi gpio setup functionsThomas Abraham
The platform data pointer that is passed to the spi gpio setup functions is not used. Hence, this parameter is removed from all the spi gpio setup functions. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13spi: s3c64xx: move controller information into driver dataThomas Abraham
Platform data is used to specify controller hardware specific information such as the tx/rx fifo level mask and bit offset of rx fifo level. Such information is not suitable to be supplied from device tree. Instead, it can be moved into the driver data and removed from platform data. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13spi: s3c64xx: remove unused S3C64XX_SPI_ST_TRLCNTZ macroThomas Abraham
The macro S3C64XX_SPI_ST_TRLCNTZ is not used and hence it is removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13Merge branch 'next/devel-dma-ops' into next/dt-samsungKukjin Kim
2012-07-11Merge branch 'pl022' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into spi-next
2012-07-10spi/gpio: start with CS non-activeUwe Kleine-König
The chip select line was configured as output with the initial value being active explicitly. It was later deasserted during spi_bitbang_setup() without any clock activity in between. So it makes no sense to activate the device at all and the chip select line can better start non-active. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-10spi: tegra: use dmaengine based dma driverLaxman Dewangan
Use the dmaengine based Tegra APB DMA driver for data transfer between SPI FIFO and memory in place of legacy Tegra APB DMA. The new driver is selected if legacy driver is not selected and new DMA driver is enabled through config file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06Merge branch 'for-3.6/common-clk' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/clk From Stephen Warren <swarren@wwwdotorg.org>: This branch contains numerous changes required as a baseline in order to convert Tegra to the common clock framework. The intention was to also include patches to actually convert Tegra to the common clock framework. However, those patches appeared late in the kernel cycle and currently cause regressions on some boards, so were dropped for now. * 'for-3.6/common-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: Provide clock for only one PWM controller ARM: tegra: Fix PWM clock programming ARM: tegra: dma: rename driver name for clock to "tegra-apbdma" ARM: tegra: Remove second instance of uart clk crypto: add clk_prepare/clk_unprepare ASoC: tegra: add clk_prepare/clk_unprepare staging: nvec: add clk_prepare/clk_unprepare spi/tegra: add clk_prepare/clk_unprepare Input: tegra-kbc - add clk_prepare/clk_unprepare USB: ehci-tegra: add clk_prepare/clk_unprepare mmc: tegra: add clk_prepare/clk_unprepare i2c: tegra: Add clk_prepare/clk_unprepare ARM: tegra: add clk_prepare/clk_unprepare Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-02spi/pl022: enable runtime PMLinus Walleij
If we're gonna use runtime PM it's a pretty good idea to actually enable it in probe() and disable it in remove() too, so it gets used for real. Up until now we only fooled around with the reference count. Cc: Vinit Shenoy <vinit.shenoy@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-02spi/pl022: delete DB5500 supportLinus Walleij
This ASIC variant has been deleted from the ARM tree, no need to keep support around. Cc: Vinit Shenoy <vinit.shenoy@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-02spi/pl022: disable port when unusedVirupax Sadashivpetimath
Commit ffbbdd21329f3e15eeca6df2d4bc11c04d9d91c0 "spi: create a message queueing infrastructure" Accidentally deleted the logic to disable the port when unused leading to higher power consumption. Fix this up. Cc: stable@kernel.org Cc: Vinit Shenoy <vinit.shenoy@st.com> Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-20spi/s3c64xx: Add the use of DMA config operationBoojin Kim
Config operation is separated from request operation in DMA common operation. Because spi driver can change the DMA config for every transfer. So this patch is using the separated DMA config operation. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-06-18SPI: fix over-eager devm_xxx() conversionRussell King
1a77b127ae (OMAP : SPI : use devm_* functions) converted the SPI device controller state to use devm_kzalloc(). Unfortunately, this is used against an unbound struct device, which results in the following when the device is bound to its driver: ------------[ cut here ]------------ WARNING: at /home/rmk/git/linux-rmk/drivers/base/dd.c:257 driver_probe_device+0x78/0x21c() Modules linked in: Backtrace: [<c0017d0c>] (dump_backtrace+0x0/0x10c) from [<c033e208>] (dump_stack+0x18/0x1c) r7:00000000 r6:c01ff28c r5:c040050c r4:00000101 [<c033e1f0>] (dump_stack+0x0/0x1c) from [<c00337ec>] (warn_slowpath_common+0x58/0x70) [<c0033794>] (warn_slowpath_common+0x0/0x70) from [<c0033828>] (warn_slowpath_null+0x24/0x2c) [<c0033804>] (warn_slowpath_null+0x0/0x2c) from [<c01ff28c>] (driver_probe_device+0x78/0x21c) [<c01ff214>] (driver_probe_device+0x0/0x21c) from [<c01ff49c>] (__driver_attach+0x6c/0x90) [<c01ff430>] (__driver_attach+0x0/0x90) from [<c01fda70>] (bus_for_each_dev+0x58/0x98) [<c01fda18>] (bus_for_each_dev+0x0/0x98) from [<c01ff0f4>] (driver_attach+0x20/0x28) [<c01ff0d4>] (driver_attach+0x0/0x28) from [<c01fe2f4>] (bus_add_driver+0xb4/0x230) [<c01fe240>] (bus_add_driver+0x0/0x230) from [<c01ffb24>] (driver_register+0xac/0x138) [<c01ffa78>] (driver_register+0x0/0x138) from [<c0215d4c>] (spi_register_driver+0x4c/0x60) [<c0215d00>] (spi_register_driver+0x0/0x60) from [<c045414c>] (ks8851_init+0x14/0x1c) [<c0454138>] (ks8851_init+0x0/0x1c) from [<c0008770>] (do_one_initcall+0x9c/0x164) [<c00086d4>] (do_one_initcall+0x0/0x164) from [<c0436410>] (kernel_init+0x128/0x210) [<c04362e8>] (kernel_init+0x0/0x210) from [<c0038754>] (do_exit+0x0/0x72c) ---[ end trace 4dcda79f5e89dd84 ]--- ks8851 spi1.0: message enable is 0 ks8851 spi1.0: eth0: revision 0, MAC 08:00:28:01:4d:c6, IRQ 194, has EEPROM Fix this by partially reverting the original commit. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-12spi/tegra: add clk_prepare/clk_unpreparePrashant Gaikwad
Use clk_prepare/clk_unprepare as required by the generic clk framework. Cc: grant.likely@secretlab.ca cc: spi-devel-general@lists.sourceforge.net Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-26Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc: soc specific changes (part 2) from Olof Johansson: "This adds support for the spear13xx platform, which has first been under review a long time ago and finally been completed after generic spear work has gone into the clock, dt and pinctrl branches. Also a number of updates for the samsung socs are part of this branch." Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much worse than they are: the exonys5 init code was refactored in commit fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a new gpio chip define and did tiny updates to the init code. So the conflict diff looks like hell, but it's actually a fairly simple change. * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: exynos: fix building with CONFIG_OF disabled ARM: EXYNOS: Add AUXDATA for i2c controllers ARM: dts: Update device tree source files for EXYNOS5250 ARM: EXYNOS: Add device tree support for interrupt combiner ARM: EXYNOS: Add irq_domain support for interrupt combiner ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5 ARM: EXYNOS: update irqs for EXYNOS5250 SoC ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll ARM: EXYNOS: add GPC4 bank instance ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition ARM: EXYNOS: Modify the GIC physical address for static io-mapping ARM: EXYNOS: Add watchdog timer clock instance pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res SPEAr: Update MAINTAINERS and Documentation SPEAr13xx: Add defconfig SPEAr13xx: Add compilation support SPEAr13xx: Add dts and dtsi files pinctrl: Add SPEAr13xx pinctrl drivers pinctrl: SPEAr: Create macro for declaring GPIO PINS SPEAr13xx: Add common clock framework support ...
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-24Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull SPI changes from Grant Likely: "Bug fixes and new features for SPI device drivers. Also move device tree support code out of drivers/of and into drivers/spi/spi.c where it makes more sense." * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: spi: By default setup spi_masters with 1 chipselect and dynamics bus number SPI: PRIMA2: use the newest APIs of PINCTRL to fix compiling errors spi/spi-fsl-spi: reference correct pdata in fsl_spi_cs_control spi: refactor spi-coldfire-qspi to use SPI queue framework. spi/omap2-mcspi: convert to the pump message infrastructure spi/rspi: add dmaengine support spi/topcliff: use correct __devexit_p annotation spi: Dont call prepare/unprepare transfer if not populated spi/ep93xx: clean probe/remove routines spi/devicetree: Move devicetree support code into spi directory spi: use module_pci_driver spi/omap2-mcspi: Trivial optimisation spi: omap2-mcspi: add support for pm_runtime autosuspend spi/omap: Remove bus_num usage for instance index OMAP : SPI : use devm_* functions spi: omap2-mcspi: convert to module_platform_driver spi: omap2-mcspi: make it behave as a module
2012-05-20spi: Add "spi:" prefix to modalias attribute of spi devicesGrant Likely
The modalias attribute of spi devices doesn't have the "spi:" prefix that is used in the UEVENT and in spi device drivers. This patch adds the prefix so the modprobe can correctly match modules to devices. Reported-by: David Daney <david.daney@cavium.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19spi: By default setup spi_masters with 1 chipselect and dynamics bus numberGrant Likely
Trivial simplification. Instead of requiring spi master drivers to always set the bus number (even when a dynamic number is desired), this patch modifies spi_alloc_master() to initialize num_chipselect to 1 (because there will always be at least one CS) and bus_num to -1 for dynamic allocation. This simplifies the code needed to be written for drivers. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19SPI: PRIMA2: use the newest APIs of PINCTRL to fix compiling errorsBarry Song
Fix the compiling errors: drivers/spi/spi-sirf.c: In function 'spi_sirfsoc_probe': drivers/spi/spi-sirf.c:563: error: implicit declaration of function 'pinmux_get' drivers/spi/spi-sirf.c:563: warning: assignment makes pointer from integer without a cast drivers/spi/spi-sirf.c:568: error: implicit declaration of function 'pinmux_enable' drivers/spi/spi-sirf.c:602: error: implicit declaration of function 'pinmux_disable' drivers/spi/spi-sirf.c:603: error: implicit declaration of function 'pinmux_put' make[3]: *** [drivers/spi/spi-sirf.o] Error 1 Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19spi/spi-fsl-spi: reference correct pdata in fsl_spi_cs_controlHerton Ronaldo Krzesinski
Commit 178db7d3, "spi: Fix device unregistration when unregistering the bus master", changed spi device initialization of dev.parent pointer to be the master's device pointer instead of his parent. This introduced a bug in spi-fsl-spi, since its usage of spi device pointer was not updated accordingly. This was later fixed by commit 5039a86, "spi/mpc83xx: fix NULL pdata dereference bug", but it missed another spot on fsl_spi_cs_control function where we also need to update usage of spi device pointer. This change address that. Cc: stable@vger.kernel.org Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19spi: refactor spi-coldfire-qspi to use SPI queue framework.Steven King
Use the new SPI queue framework; remove use of workqueue, replace mcfqspi_transfer with mcfqspi_transfer_one_message, add mcfqspi_prepare_transfer_hw and mcfqspi_unprepare_transfer_hw, update power management routines. Signed-off-by: Steven King <sfking@fdwdc.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19spi/omap2-mcspi: convert to the pump message infrastructureShubhrajyoti D
This patch converts the OMAP SPI driver to use the SPI infrastructure pump message queue.Also fixes the below warning. master is unqueued, this is deprecated Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19spi/rspi: add dmaengine supportShimoda, Yoshihiro
This patch adds dmaengine supporting using sh_dma driver. The module receives data by DMAC, it also needs TX DMAC to generate SPI's clocks. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19spi/topcliff: use correct __devexit_p annotationArnd Bergmann
__devexit functions are discarded when CONFIG_HOTPLUG is not set, so the symbol needs to be referenced carefully. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-16Merge branch 'clk-next' of git://git.linaro.org/people/mturquette/linux into ↵Arnd Bergmann
next/clock * 'clk-next' of git://git.linaro.org/people/mturquette/linux: clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ARM: Orion: SDIO: Add support for clk. ARM: Orion: NAND: Add support for clk, if there is one. ARM: Orion: EHCI: Add support for enabling clocks ARM: Orion: SATA: Add per channel clk/clkdev support. ARM: Orion: UART: Get the clock rate via clk_get_rate(). ARM: Orion: WDT: Add clk/clkdev support ARM: Orion: Eth: Add clk/clkdev support. ARM: Orion: SPI: Add clk/clkdev support. ARM: Orion: Add clocks using the generic clk infrastructure. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'imx/pinctrl' into imx/clockArnd Bergmann
Conflicts: drivers/mmc/host/sdhci-esdhc-imx.c drivers/net/ethernet/freescale/fec.c drivers/spi/spi-imx.c drivers/tty/serial/imx.c This resolves dependencies between the pinctrl and clock changes in imx. Signed-off-by: Arnd Bergmann <arnd@arndb.de>