summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2012-12-19spi/sh-hspi: fix return value check in hspi_probe().Cyril Roelandt
According to its documentation, clk_get() returns a "valid IS_ERR() condition containing errno", so we should call IS_ERR() rather than a NULL check. Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-17spi/atmel: add DT supportJean-Christophe PLAGNIOL-VILLARD
Use the newly introduce cs-gpios dt support on atmel. We do not use the hardware cs as it's wired and has bugs and limitations. As the controller believes that only active-low devices/systems exists. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-15of/spi: Fix SPI module loading by using proper "spi:" modalias prefixes.David Daney
To get modprobe to automatically load the proper modules, we need to prefix things with "spi:". Partially based on Grant Likely's suggestions. Signed-off-by: David Daney <david.daney@cavium.com> [grant.likely: reworked because drivers/of/of_spi.c has been removed] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-15spi: Change FIFO flush operation and spi channel offKyoungil Kim
Setting SW_RST does TX/RX FIFO flush. After FIFO flush, SW_RST should be cleared. The above setting and clearing SW_RST operation should be done after spi channel off. Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-15spi: Keep chipselect assertion during one messageKyoungil Kim
During all transfers in one message, the device will not be chagned. So we don't need to deassert chipselect during one message. Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-13Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull SPI updates from Grant Likely: "Primarily SPI device driver bug fixes, one removal of an old driver, and some new tegra support. There is some core code change too, but all in all pretty small stuff. The new features to note are: - Common code for describing GPIO CS lines in the device tree - Remove the SPI_BUFSIZ limitation on spi_write_the_read() - core spi ensures bits_per_word is set correctly - SPARC can now use SPI" * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: (36 commits) spi/sparc: Allow of_register_spi_devices for sparc spi: Remove HOTPLUG section attributes spi: Add support for specifying 3-wire mode via device tree spi: Fix comparison of different integer types spi/orion: Add SPI_CHPA and SPI_CPOL support to kirkwood driver. spi/sh: Add SH Mobile series as dependency to MSIOF controller spi/sh-msiof: Remove unneeded clock name spi: Remove SPI_BUFSIZ restriction on spi_write_then_read() spi/stmp: remove obsolete driver spi/clps711x: New SPI master driver spi: omap2-mcspi: remove duplicate inclusion of linux/err.h spi: omap2-mcspi: Fix the redifine warning spi/sh-hspi: add CS manual control support of_spi: add generic binding support to specify cs gpio spi: omap2-mcspi: remove duplicated include from spi-omap2-mcspi.c spi/bitbang: (cosmetic) simplify list manipulation spi/bitbang: avoid needless loop flow manipulations spi/omap: fix D0/D1 direction confusion spi: tegra: add spi driver for sflash controller spi: Dont call master->setup if not populated ...
2012-12-12Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
2012-12-11Merge tag 'pm+acpi-for-3.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Introduction of device PM QoS flags. - ACPI device power management update allowing subsystems other than PCI to use it more easily. - ACPI device enumeration rework allowing additional kinds of devices to be enumerated via ACPI. From Mika Westerberg, Adrian Hunter, Mathias Nyman, Andy Shevchenko, and Rafael J. Wysocki. - ACPICA update to version 20121018 from Bob Moore and Lv Zheng. - ACPI memory hotplug update from Wen Congyang and Yasuaki Ishimatsu. - Introduction of acpi_handle_<level>() messaging macros and ACPI-based CPU hot-remove support from Toshi Kani. - ACPI EC updates from Feng Tang. - cpufreq updates from Viresh Kumar, Fabio Baltieri and others. - cpuidle changes to quickly notice governor prediction failure from Youquan Song. - Support for using multiple cpuidle drivers at the same time and cpuidle cleanups from Daniel Lezcano. - devfreq updates from Nishanth Menon and others. - cpupower update from Thomas Renninger. - Fixes and small cleanups all over the place. * tag 'pm+acpi-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (196 commits) mmc: sdhci-acpi: enable runtime-pm for device HID INT33C6 ACPI: add Haswell LPSS devices to acpi_platform_device_ids list ACPI: add documentation about ACPI 5 enumeration pnpacpi: fix incorrect TEST_ALPHA() test ACPI / PM: Fix header of acpi_dev_pm_detach() in acpi.h ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000 ACPI : do not use Lid and Sleep button for S5 wakeup ACPI / PNP: Do not crash due to stale pointer use during system resume ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set spi / ACPI: add ACPI enumeration support gpio / ACPI: add ACPI support PM / devfreq: remove compiler error with module governors (2) cpupower: IvyBridge (0x3a and 0x3e models) support cpupower: Provide -c param for cpupower monitor to schedule process on all cores cpupower tools: Fix warning and a bug with the cpu package count cpupower tools: Fix malloc of cpu_info structure cpupower tools: Fix issues with sysfs_topology_read_file cpupower tools: Fix minor warnings cpupower tools: Update .gitignore for files created in the debug directories ...
2012-12-10spi/sparc: Allow of_register_spi_devices for sparcAndreas Larsson
The spi support code works on SPARC too. No reason to exclude it from the party. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-07spi: Add support for specifying 3-wire mode via device treeLars-Peter Clausen
This patch allows to specify that a SPI device is connected in 3-wire mode via device tree. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi: Fix comparison of different integer typesGrant Likely
Fix problem discovered with sparse: + drivers/spi/spi.c:1554:37: sparse: incompatible types in comparison expression (different signedness) drivers/spi/spi.c: In function 'spi_write_then_read': drivers/spi/spi.c:1554:23: warning: comparison of distinct pointer types lacks a cast [enabled by default] The change to SPI_BUFSIZ was introduced in commit b3a223ee2, "spi: Remove SPI_BUFSIZ restriction on spi_write_then_read()" Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi/orion: Add SPI_CHPA and SPI_CPOL support to kirkwood driver.Jason Gunthorpe
Support these transfer modes from the SPI layer by setting the appropriate register bits before doing the transfer. This was tested on the Marvell kirkwood SOC that uses this driver. Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Rolf Manderscheid <rvm@obsidianresearch.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi/sh: Add SH Mobile series as dependency to MSIOF controllerBastian Hecht
The MSIOF hardware block is used in the SH Mobile series as well, so we add it here. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi/sh-msiof: Remove unneeded clock nameBastian Hecht
clk_get() no longer needs a character string for associating the right clock as this is done via the device struct now. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi: Remove SPI_BUFSIZ restriction on spi_write_then_read()Mark Brown
In order to avoid constantly allocating and deallocating there is a fixed buffer which spi_write_then_read() uses for transfers, with an early error check to ensure that the transfer fits within the buffer. This limits the size of transfers to this size, currently max(32, SMP_CACHE_BYTES). Since we can dynamically allocate and in fact already have a fallback to do so when there is contention for the fixed buffer remove this restriction and instead dynamically allocate a suitably sized buffer if the transfer won't fit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi/stmp: remove obsolete driverWolfram Sang
This driver is obsolete and can't even be built anymore since the platform it depends has been removed. The STMP series is completely covered by the MXS platform these days, so spi-mxs can be used instead. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06Merge branch 'spi-next' from ↵Grant Likely
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git Pull in the changes Mark has queued up for SPI
2012-12-05spi/clps711x: New SPI master driverAlexander Shiyan
This patch add new driver for CLPS711X SPI master controller. Due to platform limitations driver supports only 8 bit transfer mode. Chip select control is handled via GPIO. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-03spi: omap2-mcspi: remove duplicate inclusion of linux/err.hSachin Kamat
linux/err.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-03spi: omap2-mcspi: Fix the redifine warningShubhrajyoti D
Fix the below warning drivers/spi/spi-omap2-mcspi.c:336:34: warning: symbol 'tx' shadows an earlier one drivers/spi/spi-omap2-mcspi.c:327:12: originally declared here So delete the u8 tx as it is assigned and not used(resigned afterwards). Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-30spi / ACPI: add ACPI enumeration supportMika Westerberg
ACPI 5 introduced SPISerialBus resource that allows us to enumerate and configure the SPI slave devices behind the SPI controller. This patch adds support for this to the SPI core. In addition we bind ACPI nodes to SPI devices. This makes it possible for the slave drivers to get the ACPI handle for further configuration. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-29of/spi: Honour "status=disabled" property of deviceAlexander Sverdlin
Currently of_register_spi_devices() function registers all SPI devices, independetly from their status property in device tree. According to "ePAPR 1.1" spec, device should only be registered if there is no "status" property, or it has "ok" (or "okay") value (see of_device_is_available()). In case of "platform devices", of_platform_device_create_pdata() checks for "status" and ensures that disabled devices are not pupulated. But such check for SPI buses was missing until now. Fix it. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@sysgo.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-23spi/sh-hspi: add CS manual control supportPhil Edworthy
The current HSPI driver used automatic CS control, leading to CS active for each byte transmitted. This patch changes the driver to manual CS control, and ensures CS is active thoughout a whole message. Additionally, it uses the cs_change field to determine if CS is disabled between transfers in the message. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-21of_spi: add generic binding support to specify cs gpioJean-Christophe PLAGNIOL-VILLARD
This will allow to use gpio for chip select with no modification in the driver binding When use the cs-gpios, the gpio number will be passed via the cs_gpio field and the number of chip select will automatically increased with max(hw cs, gpio cs). So if for example the controller has 2 CS lines, and the cs-gpios property looks like this: cs-gpios = <&gpio1 0 0> <0> <&gpio1 1 0> <&gpio1 2 0>; Then it should be configured so that num_chipselect = 4 with the following mapping: cs0 : &gpio1 0 0 cs1 : native cs2 : &gpio1 1 0 cs3 : &gpio1 2 0 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: spi-devel-general@lists.sourceforge.net Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [grant.likely: fixed up type of cs count so min() can do type checking] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-14spi: omap2-mcspi: remove duplicated include from spi-omap2-mcspi.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-14spi/bitbang: (cosmetic) simplify list manipulationGuennadi Liakhovetski
Use a proper list iterator instead of an open-coded loop and remove a superfluous list head initialisation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-14spi/bitbang: avoid needless loop flow manipulationsGuennadi Liakhovetski
This patch makes a loop look cleaner by replacing a "break" and a "continue" in its body by a single "if". Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-14Merge branch 'spi-mcspi' into spi-nextMark Brown
2012-11-14spi/omap: fix D0/D1 direction confusionDaniel Mack
0384e90b8 ("spi/mcspi: allow configuration of pin directions") did what it claimed to do the wrong way around. D0/D1 is configured as output by *clearing* the bits in the conf registers, hence also breaking the former default behaviour. Fix this before that change is merged to mainline. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-14Merge branch 'spi-tegra' into spi-nextMark Brown
2012-11-14spi: tegra: add spi driver for sflash controllerLaxman Dewangan
NVIDIA's Tegra20 have the SPI (SFLASH) controller to interface with spi flash device which is used for system boot. Add the spi driver for this controller. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-09Merge branches 'spi-core' and 'spi-tegra' into spi-nextMark Brown
2012-11-09spi: Dont call master->setup if not populatedLaxman Dewangan
Currently the master->setup() is called unconditionally. The assumption is that every driver need to implement this callback. This encourages drivers to populate empty functions to prevent crashing. This patch prevents the call of master->setup() if it is not populated. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-09spi: tegra: sequence compatible strings as per preferenceLaxman Dewangan
Sequence compatible list for tegra20-slink driver to first look for Tegra30 and then Tegra20. Tegra30 have additional feature in HW which need to be utilize if it is provided from DT. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-09spi: make sure all transfer has bits_per_word setLaxman Dewangan
When spi client does the spi transfer and does not sets the bits_per_word for each transfer then set it as default of spi device in spi core before calling low level transfer. Removing the similar code from spi-tegra20-slink driver as it is not required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-07Merge branch 'spi-fix-s3c64xx' into spi-nextMark Brown
2012-11-07spi: s3c64xx: Add fix for crash in spi suspend/resumeAbhilash Kesavan
The SPI driver makes a gpio_request during initialization. The requested gpios need to be populated as part of the s3c64xx_spi_driver_data so that they can be released during suspend and requested again during resume. Add the missing code to save the requested gpios as part of the driver data. This fixes a SPI driver suspend crash. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-06arm: at91: move platfarm_data to include/linux/platform_data/atmel.hJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06Merge branch 'spi-linus' into spi-nextMark Brown
2012-11-06spi: omap2-mcspi: Reorder the wait_for_completion for txShubhrajyoti D
The commit d7b4394e[Cleanup the omap2_mcspi_txrx_dma function] changed the wait_for_completion order. Move the wait so that the rx doesnot wait for the tx to complete. Reported-and-tested-by: Sørensen, Stefan <Sorensen@polycom.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-01Merge branch 'spi-spidev' into spi-nextMark Brown
2012-11-01spi: spidev: Add Rohm DH2228FV DAC compatible stringMaxime Ripard
Since we don't have a driver for it yet, use spidev instead. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-01spi: spidev: Add device tree bindingsMaxime Ripard
This will allow to probe spidev from device tree by adding the compatible string of each device to this array. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-30Merge branch 'spi-tegra' into spi-nextMark Brown
2012-10-30spi: tegra: add spi driver for SLINK controllerLaxman Dewangan
Tegra20/Tegra30 supports the spi interface through its SLINK controller. Add spi driver for SLINK controller. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-28Merge tag 'spi-mxs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull minor spi MXS fixes from Mark Brown: "These fixes are both pretty minor ones and are driver local." * tag 'spi-mxs' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi: mxs: Terminate DMA in case of DMA timeout spi: mxs: Assign message status after transfer finished
2012-10-24Merge tag 'spi-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi fixes from Mark Brown: "A bunch of fixes here, mostly minor except for the pl022 which has just been a bit of a shambles all round, the recent runtime PM changes have as far as I can tell never worked so they're just getting thrown out." * tag 'spi-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/pl022: Revert recent runtime PM changes spi: tsc2005: delete soon-obsolete e-mail address spi: spi-rspi: fix build error for the latest shdma driver
2012-10-23Merge tag 'spi-linus' into spi-nextMark Brown
spi: Fixes for v3.7 A bunch of fixes here, mostly minor except for the pl022 which has just been a bit of a shambles all round, the recent runtime PM changes have as far as I can tell never worked so they're just getting thrown out. Conflicts: drivers/spi/spi-pl022.c
2012-10-23spi/pl022: Revert recent runtime PM changesUlf Hansson
[Originally sent by Ulf as two changes, squashed down into one with a redone changelog, thanks to Russell King for analysis. -- broonie] This reverts commit 688723 (spi/pl022: enable runtime PM) and commit 2fb30d (spi/pl022: fix spi-pl022 pm enable at probe). Commit "spi/pl022: enable runtime PM" introduced runtime PM issues as it interacted badly with the work Russell King had done to move core runtime PM handling into the bus. Due to that commit, "spi/pl022: fix spi-pl022 pm enable at probe" was merged to fix part of those issues. Instead of adding another fix, let's clean up and revert everything back to when it was already fine. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Revert "spi/pl022: enable runtime PM" Conflicts: drivers/spi/spi-pl022.c