summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/Kconfig
AgeCommit message (Collapse)Author
2018-08-24MLK-14955-1 imx8: Added MXC_ARM64 into dependentFrank Li
Otherwise there are warning when remove COMPILE_TEST Signed-off-by: Frank Li <Frank.Li@nxp.com>
2016-10-27serial: SERIAL_STM32 should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `stm32_serial_remove': stm32-usart.c:(.text+0xcea1a): undefined reference to `bad_dma_ops' stm32-usart.c:(.text+0xcea7a): undefined reference to `bad_dma_ops' Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31serial: pch_uart: Add support for reading clock-frequency from DTZubair Lutfullah Kakakhel
The MIPS based Boston platform provides a 25MHz clock to the UART. Enable the driver for MIPS and add support in the driver to read the frequency from device tree. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25serial: Make SERIAL_MPS2_UART depend on ARCH_MPS2Geert Uytterhoeven
Enabling support for the UART on the ARM MPS2 platform only make sense when compiling for the ARM MPS2 platform, unless compile-testing. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25serial: sh-sci: Add support for GPIO-controlled modem linesGeert Uytterhoeven
Enhance the Renesas SCI UART driver to add support for GPIO-controlled modem lines (CTS, DSR, DCD, RNG, RTS, DTR), using the serial_mctrl_gpio helpers. GPIO-controlled modem lines can be used when dedicated modem lines are not available. Invalid configurations specifying both GPIO RTS/CTS and dedicated RTS/CTS are rejected. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-20Merge tag 'tty-4.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here's the large TTY and Serial driver update for 4.7-rc1. A few new serial drivers are added here, and Peter has fixed a bunch of long-standing bugs in the tty layer and serial drivers as normal. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits) MAINTAINERS: 8250: remove website reference serial: core: Fix port mutex assert if lockdep disabled serial: 8250_dw: fix wrong logic in dw8250_check_lcr() tty: vt, finish looping on duplicate tty: vt, return error when con_startup fails QE-UART: add "fsl,t1040-ucc-uart" to of_device_id serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios serial: 8250dw: Add device HID for future AMD UART controller Fix OpenSSH pty regression on close serial: mctrl_gpio: add IRQ locking serial: 8250: Integrate Fintek into 8250_base serial: mps2-uart: add support for early console serial: mps2-uart: add MPS2 UART driver dt-bindings: document the MPS2 UART bindings serial: sirf: Use generic uart-has-rtscts DT property serial: sirf: Introduce helper variable struct device_node *np serial: mxs-auart: Use generic uart-has-rtscts DT property serial: imx: Use generic uart-has-rtscts DT property doc: DT: Add Generic Serial Device Tree Bindings serial: 8250: of: Make tegra_serial_handle_break() static ...
2016-05-13serial: pic32_uart: Add PIC32 UART driverAndrei Pistirica
This adds UART and a serial console driver for Microchip PIC32 class devices. [ralf@linux-mips.org: Resolved merge conflict.] Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Reviewed-by: Alan Cox <alan@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Cc: linux-api@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12101/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30serial: mps2-uart: add support for early consoleVladimir Murzin
This adds support early console for MPS2 UART which can be enabled via earlycon=mps2,0x40004000 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30serial: mps2-uart: add MPS2 UART driverVladimir Murzin
This driver adds support to the UART controller found on ARM MPS2 platform. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30serial: mxs-auart: add Alphascale ASM9260 supportOleksij Rempel
Alphascale ASM9260 uart IP has some common registers with Freescale STMP37XX. This patch provide changes which allow to reuse mxs-auart.c code for ASM9260. Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30serial: Make SERIAL_MVEBU_UART depend on ARCH_MVEBUGeert Uytterhoeven
Enabling support for the UART on Marvell EBU SoCs only make sense when compiling for Marvell EBU SoCs, unless compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: serial: meson: Implement earlycon supportAndreas Färber
Split off the bulk of the existing meson_serial_console_write() implementation into meson_serial_port_write() for implementing meson_serial_early_console_write(). Use "meson" as the earlycon driver name, courtesy of Nicolas. Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com> Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07serial: mvebu-uart: initial support for Armada-3700 serial portWilson Ding
Armada-3700's uart is a simple serial port, which doesn't support. Configuring the modem control lines. The uart port has a 32 bytes Tx FIFO and a 64 bytes Rx FIFO The uart driver implements the uart core operations. It also support the system (early) console based on Armada-3700's serial port. Known Issue: The uart driver currently doesn't support clock programming, which means the baud-rate stays with the default value configured by the bootloader at boot time [gregory.clement@free-electrons.com: Rewrite many part which are too long to enumerate] Signed-off-by: Wilson Ding <dingwei@marvell.com> Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07tty: sh-sci: Use ARCH_RENESASSimon Horman
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-06serial-uartlite: add earlycon supportRich Felker
Microblaze currently uses the old earlyprintk system, rather than the unified earlycon support, to show boot messages on uartlite. Add earlycon support so that other archs using uartlite can benefit from it. The new code in uartlite.c is copied almost verbatim from arch/microblaze/kernel/early_printk.c. Signed-off-by: Rich Felker <dalias@libc.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-06serial: sh-sci: Add CONFIG_SERIAL_EARLYCON supportYoshinori Sato
"earlyprintk" is architecture specific option. General "earlycon" option support is much better. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> [uli: preserve other SCSCR bits when asserting RE and TE] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> [geert: rewording, #ifdef rework] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-06serial: Remove 68328 driverFrederik Völkel
It's old, messy and mostly unmaintained. Remove it as suggested by Peter Hurley and Alan. Signed-off-by: Frederik Völkel <frederik.voelkel@fau.de> Signed-off-by: Lukas Braun <lukas.braun@fau.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-20Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2015-12-22Merge tag 'qcom-soc-for-4.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Qualcomm ARM Based SoC Updates for 4.5 * Add WCNSS_CTRL client * Various Kconfig changes to fix build issues * Update SoC Qualcomm MAINTAINERS entry * Add SMP2P, SMSM, and SMEM state machine drivers * Add SMD-RPM support for existing platforms * tag 'qcom-soc-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM soc: qcom: Introduce common SMEM state machine code Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-13serial: imx: implement handshaking using gpios with the mctrl_gpio helperUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13serial: 8250: move of_serial code to 8250 directoryArnd Bergmann
As the of-serial driver is now 8250 specific, we can move the file to a more appropriate place in teh 8250 subdirectory and adapt the Kconfig help text and file name. I'm leaving the CONFIG_SERIAL_OF_PLATFORM symbol unchanged to avoid breaking user configuration files unnecessarily. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13serial: remove NWP serial supportArnd Bergmann
The NWP serial driver is no longer needed, as the two users of this hardware have migrated to a much faster generation hardware, see https://en.wikipedia.org/wiki/QPACE2 for the replacement. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Krill <ben@codiert.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13serial: SERIAL_MXS_AUART should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: ERROR: "dma_unmap_sg" [drivers/tty/serial/mxs-auart.ko] undefined! ERROR: "dma_map_sg" [drivers/tty/serial/mxs-auart.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13serial: SERIAL_IMX_AUART should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: ERROR: "dma_unmap_sg" [drivers/tty/serial/imx.ko] undefined! ERROR: "dma_map_sg" [drivers/tty/serial/imx.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13serial: SERIAL_ATMEL should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `atmel_release_rx_dma': atmel_serial.c:(.text+0x2502e): undefined reference to `dma_unmap_sg' drivers/built-in.o: In function `atmel_release_tx_dma': atmel_serial.c:(.text+0x25080): undefined reference to `dma_unmap_sg' drivers/built-in.o: In function `atmel_tx_dma': atmel_serial.c:(.text+0x2517a): undefined reference to `dma_sync_sg_for_cpu' drivers/built-in.o: In function `atmel_release_tx_pdc': atmel_serial.c:(.text+0x252e6): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `atmel_prepare_tx_pdc': atmel_serial.c:(.text+0x2531a): undefined reference to `dma_map_single' drivers/built-in.o: In function `atmel_release_rx_pdc': atmel_serial.c:(.text+0x25362): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `atmel_tx_pdc': atmel_serial.c:(.text+0x25722): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `atmel_rx_from_pdc': atmel_serial.c:(.text+0x2601a): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `atmel_rx_from_dma': atmel_serial.c:(.text+0x261b2): undefined reference to `dma_sync_sg_for_cpu' atmel_serial.c:(.text+0x26264): undefined reference to `dma_sync_sg_for_cpu' drivers/built-in.o: In function `atmel_prepare_rx_pdc': atmel_serial.c:(.text+0x262de): undefined reference to `dma_unmap_single' atmel_serial.c:(.text+0x26308): undefined reference to `dma_map_single' Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-08serial: msm_serial: Make config tristateStephen Boyd
This driver works as a module, so mark it as a tristate config instead of a bool. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-11-20serial: fsl_lpuart: Fix earlycon supportPeter Hurley
Earlycon support for Freescale lpuart should only be enabled when console support is enabled. Fixes: 1d59b382f1c4 ("serial: fsl_lpuart: add earlycon support") Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17serial: fsl_lpuart: add earlycon supportStefan Agner
Add support for DT and command line based earlycon support for lpuart and lpuart32 used on Freescale Vybrid and and QorIQ LS1021A processors. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: mxs-auart+imx: allow compile testing on non-Freescale architecturesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: atmel: allow compile testing on non-atmel architecturesUwe Kleine-König
This commit also fixes compiler warnings and errors seen when building on x86_64. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: imx: add earlycon supportLucas Stach
Earlycon allows to have an early debugging console that doesn't need to be statically configured in the kernel config, like earlyprintk, but is set up through the stdout-path DT property. This allows to have the early debugging always built into the kernel and enabled on demand without clashing between different boards or architectures. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Switch to generic DMA residue handlingGeert Uytterhoeven
Convert the SCI driver from the SHDMAE-specific partial DMA transfer handling to the generic dmaengine residual data framework. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-04Revert "uart: pl011: Add support to ZTE ZX296702 uart"Greg Kroah-Hartman
This reverts commit 8cd90e50d1408c65c355084b1c7f8f9085f49c6b as with this patch the serial console is broken on lots of platforms. Reported-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jun Nie <jun.nie@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04uart: pl011: Add support to ZTE ZX296702 uartJun Nie
Support ZTE uart with some registers differing offset. Probe as platform device for not AMBA IP ID is available on ZTE uart. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: etraxfs-uart: use mctrl_gpio helpers for handling modem signalsNiklas Cassel
In order to use the mctrl_gpio helpers, we change the DT bindings: ri-gpios renamed to rng-gpios. cd-gpios renamed to dcd-gpios. However, no in-tree dts/dtsi specifies these, so no worries. Signed-off-by: Niklas Cassel <nks@flawful.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27Merge 4.2-rc4 into tty-nextGreg Kroah-Hartman
Other serial driver work wants to build on patches now in 4.2-rc4 so merge the branch so this can properly happen. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial/uartlite: Let it build on any arch with IOMEMRicardo Ribalda Delgado
Being a soft core, it can be located not only on PPC or Microblaze platforms. Since the driver already does endianness detection we only need to change the Kconfig to use it in other arches. This is also done in other softcores as xilinx-spi. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23sc16is7xx: fix Kconfig dependenciesJakub Kicinski
When I2C=m and SPI=y or-ing them will produce =y while what we need is the lower bound, i.e. =m. Fortunately SPI is a boolean so we need to handle only one special case. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-26Merge tag 'tty-4.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here's the tty and serial driver patches for 4.2-rc1. A number of individual driver updates, some code cleanups, and other minor things, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (152 commits) Doc: serial-rs485.txt: update RS485 driver interface Doc: tty.txt: remove mention of the BKL MAINTAINERS: tty: add serial docs directory serial: sprd: check for NULL after calling devm_clk_get serial: 8250_pci: Correct uartclk for xr17v35x expansion chips serial: 8250_pci: Add support for 12 port Exar boards serial: 8250_uniphier: add bindings document for UniPhier UART serial: core: cleanup in uart_get_baud_rate() serial: stm32-usart: Add STM32 USART Driver tty/serial: kill off set_irq_flags usage tty: move linux/gsmmux.h to uapi doc: dt: add documentation for nxp,lpc1850-uart serial: 8250: add LPC18xx/43xx UART driver serial: 8250_uniphier: add UniPhier serial driver serial: 8250_dw: support ACPI platforms with integrated DMA engine serial: of_serial: check the return value of clk_prepare_enable() serial: of_serial: use devm_clk_get() instead of clk_get() serial: earlycon: Add support for big-endian MMIO accesses serial: sirf: use hrtimer for data rx serial: sirf: correct the fifo empty_bit ...
2015-06-23sh-sci: Add h8300 SCIYoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-06-10serial: stm32-usart: Add STM32 USART DriverMaxime Coquelin
This drivers adds support to the STM32 USART controller, which is a standard serial driver. Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01sc16is7xx: spi interface is addedRama Kiran Kumar Indrakanti
spi interface for sc16is7xx is added along with Kconfig flag to enable spi or i2c, thus in a instance we can have either spi or i2c or both, in sync to the hw. Signed-off-by: Rama Kiran Kumar Indrakanti <indrakanti_ram@hotmail.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24serial: samsung: only use earlycon for consoleArnd Bergmann
A configuration that enables earlycon but not the core console code causes a link error: drivers/built-in.o: In function `setup_earlycon': drivers/tty/serial/earlycon.c:70: undefined reference to `uart_parse_earlycon' That error can be triggered by the newly added samsung earlycon support, which is missing a 'select' statement. As suggested by Peter Hurley, solves the problem by moving the 'select SERIAL_EARLYCON' statement to the samsung console driver option, as it is done by all other console drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b94ba0328d3b3 ("serial: samsung: Add support for early console") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10TTY: msm_smd_tty: Remove unused driverStephen Boyd
This code is no longer used now that mach-msm has been removed. Delete it. Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06serial: SERIAL_IFX6X60 should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `ifx_spi_free_device': ifx6x60.c:(.text+0x96d9a): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ifx_spi_spi_probe': ifx6x60.c:(.text+0x978a2): undefined reference to `dma_alloc_coherent' While DMA is optional in this driver, and is used only if ifx_modem_platform_data.use_dma is set, there are currently no in-tree users of ifx_modem_platform_data (and thus of this driver), so just make it depend on HAS_DMA. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1Christophe Leroy
Two config options exist to define powerpc MPC8xx: * CONFIG_PPC_8xx * CONFIG_8xx In addition, CONFIG_PPC_8xx also defines CONFIG_CPM1 as communication co-processor arch/powerpc/platforms/Kconfig.cputype has contained the following comment about CONFIG_8xx item for some years: "# this is temp to handle compat with arch=ppc" It looks like not many places still have that old CONFIG_8xx used, so it is likely to be a good time to get rid of it completely ? Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty: serial: Remove orphaned serial driverStephen Boyd
This driver is orphaned now that mach-msm has been removed. Delete it. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty: serial: msm_serial: Remove dead codeStephen Boyd
This config no longer exists now that mach-msm has been removed. Delete it and the associated code. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07x86, intel-mid: remove Intel MID specific serial supportAndy Shevchenko
Since we have a native 8250 driver carrying the Intel MID serial devices the specific support is not needed anymore. This patch removes it for Intel MID. Note that the console device name is changed from ttyMFDx to ttySx. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-27 23:41:08 +0000