summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Collapse)Author
2014-09-03serial: core: Preserve termios c_cflag for console resumePeter Hurley
commit ae84db9661cafc63d179e1d985a2c5b841ff0ac4 upstream. When a tty is opened for the serial console, the termios c_cflag settings are inherited from the console line settings. However, if the tty is subsequently closed, the termios settings are lost. This results in a garbled console if the console is later suspended and resumed. Preserve the termios c_cflag for the serial console when the tty is shutdown; this reflects the most recent line settings. Fixes: Bugzilla #69751, 'serial console does not wake from S3' Reported-by: Valerio Vanni <valerio.vanni@inwind.it> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-08-26sunsab: Fix detection of BREAK on sunsab serial consoleChristopher Alexander Tobias Schulze
[ Upstream commit fe418231b195c205701c0cc550a03f6c9758fd9e ] Fix detection of BREAK on sunsab serial console: BREAK detection was only performed when there were also serial characters received simultaneously. To handle all BREAKs correctly, the check for BREAK and the corresponding call to uart_handle_break() must also be done if count == 0, therefore duplicate this code fragment and pull it out of the loop over the received characters. Patch applies to 3.16-rc6. Signed-off-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-28serial: sirf: Fix compilation failureDaniel Thompson
commit 58eb97c99da6a82c556ddec70683eb3863d4f617 upstream. After 07d410e0) serial: sirf: fix spinlock deadlock issue it is no longer possiblet to compile this driver. The rename of one of the spinlocks is faulty. After looking at the original patch I believe this is the correct fix. Compile tested using ARM's multi_v7_defconfig Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-28serial: sirf: fix spinlock deadlock issueQipan Li
commit 07d410e06463f3c1c106e2bb2a7ff23eff1e71c9 upstream. commit fb78b811422cd2d8c8605949cc4cc13618347ad5 provide a workaround for kernel panic, but bring potential deadlock risk. that is in sirfsoc_rx_tmo_process_tl while enter into sirfsoc_uart_pio_rx_chars cpu hold uart_port->lock, if uart interrupt comes cpu enter into sirfsoc_uart_isr and deadlock occurs in getting uart_port->lock. the patch replace spin_lock version to spin_lock_irq* version to avoid spinlock dead lock issue. let function tty_flip_buffer_push in tasklet outof spin_lock_irq* protect area to avoid add the pair of spin_lock and spin_unlock for tty_flip_buffer_push. BTW drop self defined unused spinlock protect of tx_lock/rx_lock. 56274.220464] BUG: spinlock lockup suspected on CPU#0, swapper/0/0 [56274.223648] lock: 0xc05d9db0, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 [56274.231278] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 3.10.35 #1 [56274.238241] [<c0015530>] (unwind_backtrace+0x0/0xf4) from [<c00120d8>] (show_stack+0x10/0x14) [56274.246742] [<c00120d8>] (show_stack+0x10/0x14) from [<c01b11b0>] (do_raw_spin_lock+0x110/0x184) [56274.255501] [<c01b11b0>] (do_raw_spin_lock+0x110/0x184) from [<c02124c8>] (sirfsoc_uart_isr+0x20/0x42c) [56274.264874] [<c02124c8>] (sirfsoc_uart_isr+0x20/0x42c) from [<c0075790>] (handle_irq_event_percpu+0x54/0x17c) [56274.274758] [<c0075790>] (handle_irq_event_percpu+0x54/0x17c) from [<c00758f4>] (handle_irq_event+0x3c/0x5c) [56274.284561] [<c00758f4>] (handle_irq_event+0x3c/0x5c) from [<c0077fa0>] (handle_level_irq+0x98/0xfc) [56274.293670] [<c0077fa0>] (handle_level_irq+0x98/0xfc) from [<c0074f44>] (generic_handle_irq+0x2c/0x3c) [56274.302952] [<c0074f44>] (generic_handle_irq+0x2c/0x3c) from [<c000ef80>] (handle_IRQ+0x40/0x90) [56274.311706] [<c000ef80>] (handle_IRQ+0x40/0x90) from [<c000dc80>] (__irq_svc+0x40/0x70) [56274.319697] [<c000dc80>] (__irq_svc+0x40/0x70) from [<c038113c>] (_raw_spin_unlock_irqrestore+0x10/0x48) [56274.329158] [<c038113c>] (_raw_spin_unlock_irqrestore+0x10/0x48) from [<c0200034>] (tty_port_tty_get+0x58/0x90) [56274.339213] [<c0200034>] (tty_port_tty_get+0x58/0x90) from [<c0212008>] (sirfsoc_uart_pio_rx_chars+0x1c/0xc8) [56274.349097] [<c0212008>] (sirfsoc_uart_pio_rx_chars+0x1c/0xc8) from [<c0212ef8>] (sirfsoc_rx_tmo_process_tl+0xe4/0x1fc) [56274.359853] [<c0212ef8>] (sirfsoc_rx_tmo_process_tl+0xe4/0x1fc) from [<c0027c04>] (tasklet_action+0x84/0x114) [56274.369739] [<c0027c04>] (tasklet_action+0x84/0x114) from [<c0027db4>] (__do_softirq+0x120/0x200) [56274.378585] [<c0027db4>] (__do_softirq+0x120/0x200) from [<c0027f44>] (do_softirq+0x54/0x5c) [56274.386998] [<c0027f44>] (do_softirq+0x54/0x5c) from [<c00281ec>] (irq_exit+0x9c/0xd0) [56274.394899] [<c00281ec>] (irq_exit+0x9c/0xd0) from [<c000ef84>] (handle_IRQ+0x44/0x90) [56274.402790] [<c000ef84>] (handle_IRQ+0x44/0x90) from [<c000dc80>] (__irq_svc+0x40/0x70) [56274.410774] [<c000dc80>] (__irq_svc+0x40/0x70) from [<c0288af4>] (cpuidle_enter_state+0x50/0xe0) [56274.419532] [<c0288af4>] (cpuidle_enter_state+0x50/0xe0) from [<c0288c34>] (cpuidle_idle_call+0xb0/0x148) [56274.429080] [<c0288c34>] (cpuidle_idle_call+0xb0/0x148) from [<c000f3ac>] (arch_cpu_idle+0x8/0x38) [56274.438016] [<c000f3ac>] (arch_cpu_idle+0x8/0x38) from [<c0059344>] (cpu_startup_entry+0xfc/0x140) [56274.446956] [<c0059344>] (cpu_startup_entry+0xfc/0x140) from [<c04a3a54>] (start_kernel+0x2d8/0x2e4) Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-18serial: Fix IGNBRK handlingPeter Hurley
commit ef8b9ddcb45fa3b1e11acd72be2398001e807d14 upstream. If IGNBRK is set without either BRKINT or PARMRK set, some uart drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the line discipline, when it should send either nothing or the TTYBREAK flag set. This happens because the read_status_mask masks out the BI condition, which uart_insert_char() then interprets as a normal 0x00 byte. SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General Terminal Interface - Input Modes, states: "If IGNBRK is set, a break condition detected on input shall be ignored; that is, not put on the input queue and therefore not read by any process." Fix read_status_mask to include the BI bit if IGNBRK is set; the lsr status retains the BI bit if a BREAK is recv'd, which is subsequently ignored in uart_insert_char() when masked with the ignore_status_mask. Affected drivers: 8250 - all serial_txx9 mfd amba-pl010 amba-pl011 atmel_serial bfin_uart dz ip22zilog max310x mxs-auart netx-serial pnx8xxx_uart pxa sb1250-duart sccnxp serial_ks8695 sirfsoc_uart st-asc vr41xx_siu zs sunzilog fsl_lpuart sunsab ucc_uart bcm63xx_uart sunsu efm32-uart pmac_zilog mpsc msm_serial m32r_sio Unaffected drivers: omap-serial rp2 sa1100 imx icom Annotated for fixes: altera_uart mcf Drivers without break detection: 21285 xilinx-uartps altera_jtaguart apbuart arc-uart clps711x max3100 uartlite msm_serial_hs nwpserial lantiq vt8500_serial Unknown: samsung mpc52xx_uart bfin_sport_uart cpm_uart/core Fixes: Bugzilla #71651, '8250_core.c incorrectly handles IGNBRK flag' Reported-by: Ivan <athlon_@mail.ru> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-02serial: 8250_dw: Fix LCR workaround regressionJames Hogan
commit 6979f8d28049879e6147767d93ba6732c8bd94f4 upstream. Commit c49436b657d0 (serial: 8250_dw: Improve unwritable LCR workaround) caused a regression. It added a check that the LCR was written properly to detect and workaround the busy quirk, but the behaviour of bit 5 (UART_LCR_SPAR) differs between IP versions 3.00a and 3.14c per the docs. On older versions this caused the check to fail and it would repeatedly force idle and rewrite the LCR register, causing delays and preventing any input from serial being received. This is fixed by masking out UART_LCR_SPAR before making the comparison. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Tim Kryger <tim.kryger@linaro.org> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Matt Porter <matt.porter@linaro.org> Cc: Markus Mayer <markus.mayer@linaro.org> Tested-by: Tim Kryger <tim.kryger@linaro.org> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-02serial: 8250_dw: Improve unwritable LCR workaroundTim Kryger
commit c49436b657d0a56a6ad90d14a7c3041add7cf64d upstream. When configured with UART_16550_COMPATIBLE=NO or in versions prior to the introduction of this option, the Designware UART will ignore writes to the LCR if the UART is busy. The current workaround saves a copy of the last written LCR and re-writes it in the ISR for a special interrupt that is raised when a write was ignored. Unfortunately, interrupts are typically disabled prior to performing a sequence of register writes that include the LCR so the point at which the retry occurs is too late. An example is serial8250_do_set_termios() where an ignored LCR write results in the baud divisor not being set and instead a garbage character is sent out the transmitter. Furthermore, since serial_port_out() offers no way to indicate failure, a serious effort must be made to ensure that the LCR is actually updated before returning back to the caller. This is difficult, however, as a UART that was busy during the first attempt is likely to still be busy when a subsequent attempt is made unless some extra action is taken. This updated workaround reads back the LCR after each write to confirm that the new value was accepted by the hardware. Should the hardware ignore a write, the TX/RX FIFOs are cleared and the receive buffer read before attempting to rewrite the LCR out of the hope that doing so will force the UART into an idle state. While this may seem unnecessarily aggressive, writes to the LCR are used to change the baud rate, parity, stop bit, or data length so the data that may be lost is likely not important. Admittedly, this is far from ideal but it seems to be the best that can be done given the hardware limitations. Lastly, the revised workaround doesn't touch the LCR in the ISR, so it avoids the possibility of a "serial8250: too much work for irq" lock up. This problem is rare in real situations but can be reproduced easily by wiring up two UARTs and running the following commands. # stty -F /dev/ttyS1 echo # stty -F /dev/ttyS2 echo # cat /dev/ttyS1 & [1] 375 # echo asdf > /dev/ttyS1 asdf [ 27.700000] serial8250: too much work for irq96 [ 27.700000] serial8250: too much work for irq96 [ 27.710000] serial8250: too much work for irq96 [ 27.710000] serial8250: too much work for irq96 [ 27.720000] serial8250: too much work for irq96 [ 27.720000] serial8250: too much work for irq96 [ 27.730000] serial8250: too much work for irq96 [ 27.730000] serial8250: too much work for irq96 [ 27.740000] serial8250: too much work for irq96 Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Conflicts: drivers/tty/serial/8250/8250_dw.c
2014-06-068250_core: Fix unwanted TX chars writeLoic Poulain
commit b08c9c317e3f7764a91d522cd031639ba42b98cc upstream. On transmit-hold-register empty, serial8250_tx_chars should be called only if we don't use DMA. DMA has its own tx cycle. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-06serial: 8250: Fix thread unsafe __dma_tx_complete functionLoic Poulain
commit f8fd1b0350d3a4581125f5eda6528f5a2c5f9183 upstream. __dma_tx_complete is not protected against concurrent call of serial8250_tx_dma. it can lead to circular tail index corruption or parallel call of serial_tx_dma on the same data portion. This patch fixes this issue by holding the port lock. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15tty: serial: 8250_core.c Bug fix for Exar chips.Michael Welling
commit b790f210fe8423eff881b2a8a93ba5dbc45534d0 upstream. The sleep function was updated to put the serial port to sleep only when necessary. This appears to resolve the errant behavior of the driver as described in Kernel Bug 61961 – "My Exar Corp. XR17C/D152 Dual PCI UART modem does not work with 3.8.0". Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-22serial: sirf: fix kernel panic caused by unpaired spinlockQipan Li
commit fb78b811422cd2d8c8605949cc4cc13618347ad5 upstream. commit 8b9ade9f74f8a279 coming from Viresh Kumar "tty: serial: sirfsoc: drop uart_port->lock before calling tty_flip_buffer_push()" broke sirfsoc uart driver by knic: [ 5.129122] BUG: spinlock already unlocked on CPU#0, ip6tables/1331 [ 5.132554] lock: sirfsoc_uart_ports+0x4/0x8a0, .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1 [ 5.141651] CPU: 0 PID: 1331 Comm: ip6tables Tainted: G W O 3.10.16 #3 [ 5.148866] [<c0013528>] (unwind_backtrace+0x0/0xe0) from [<c0010e70>] (show_stack+0x10/0x14) [ 5.157362] [<c0010e70>] (show_stack+0x10/0x14) from [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) [ 5.166125] [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) from [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) [ 5.175322] [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) from [<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) [ 5.185120] [<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) from [<c0204fb8>] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) [ 5.195875] [<c0204fb8>] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) from [<c0024b50>] (tasklet_action+0x8c/0xec) [ 5.205673] [<c0024b50>] (tasklet_action+0x8c/0xec) from [<c00242a8>] (__do_softirq+0xec/0x1d4) [ 5.214347] [<c00242a8>] (__do_softirq+0xec/0x1d4) from [<c0024428>] (do_softirq+0x48/0x54) [ 5.222674] [<c0024428>] (do_softirq+0x48/0x54) from [<c0024690>] (irq_exit+0x74/0xc0) [ 5.230573] [<c0024690>] (irq_exit+0x74/0xc0) from [<c000e1e8>] (handle_IRQ+0x6c/0x90) [ 5.238465] [<c000e1e8>] (handle_IRQ+0x6c/0x90) from [<c000d500>] (__irq_svc+0x40/0x70) [ 5.246446] [<c000d500>] (__irq_svc+0x40/0x70) from [<c0092e7c>] (mark_page_accessed+0xc/0x68) [ 5.255034] [<c0092e7c>] (mark_page_accessed+0xc/0x68) from [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) [ 5.264402] [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) from [<c00a3b4c>] (unmap_vmas+0x44/0x54) [ 5.273164] [<c00a3b4c>] (unmap_vmas+0x44/0x54) from [<c00a81a8>] (exit_mmap+0xc4/0x1e0) [ 5.281233] [<c00a81a8>] (exit_mmap+0xc4/0x1e0) from [<c001bb78>] (mmput+0x3c/0xdc) [ 5.288868] [<c001bb78>] (mmput+0x3c/0xdc) from [<c0021b0c>] (do_exit+0x30c/0x828) [ 5.296413] [<c0021b0c>] (do_exit+0x30c/0x828) from [<c0022dac>] (do_group_exit+0x4c/0xb0) [ 5.304653] [<c0022dac>] (do_group_exit+0x4c/0xb0) from [<c0022e20>] (__wake_up_parent+0x0/0x18) Root cause: the commit dropped uart_port->lock before calling tty_flip_buffer_push(), but in sirfsoc-uart, sirfsoc_uart_pio_rx_chars() can be called by sirfsoc_rx_tmo_process_tl(). here uart_port->lock has not been taken yet. so that caused unpaired lock/unlock. Solution: This patch is doing a quick fix for that, it adds spin_lock/unlock(&port->lock) protect to sirfsoc_uart_pio_rx_chars() in sirfsoc_rx_tmo_process_tl() to keep spin_lock/unlock in pair. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06serial: 8250: enable UART_BUG_NOMSR for TegraStephen Warren
commit 3685f19e07802ec4207b52465c408f185b66490e upstream. Tegra chips have 4 or 5 identical UART modules embedded. UARTs C..E have their MODEM-control signals tied off to a static state. However UARTs A and B can optionally route those signals to/from package pins, depending on the exact pinmux configuration. When these signals are not routed to package pins, false interrupts may trigger either temporarily, or permanently, all while not showing up in the IIR; it will read as NO_INT. This will eventually lead to the UART IRQ being disabled due to unhandled interrupts. When this happens, the kernel may print e.g.: irq 68: nobody cared (try booting with the "irqpoll" option) In order to prevent this, enable UART_BUG_NOMSR. This prevents UART_IER_MSI from being enabled, which prevents the false interrupts from triggering. In practice, this is not needed under any of the following conditions: * On Tegra chips after Tegra30, since the HW bug has apparently been fixed. * On UARTs C..E since their MODEM control signals are tied to the correct static state which doesn't trigger the issue. * On UARTs A..B if the MODEM control signals are routed out to package pins, since they will then carry valid signals. However, we ignore these exceptions for now, since they are only relevant if a board actually hooks up more than a 4-wire UART, and no currently supported board does this. If we ever support a board that does, we can refine the algorithm that enables UART_BUG_NOMSR to take those exceptions into account, and/or read a flag from DT/... that indicates that the board has hooked up and pinmux'd more than a 4-wire UART. Reported-by: Olof Johansson <olof@lixom.net> # autotester Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chipJonathan Woithe
commit 9c5320f8d7d9a2cf623e65d50e1113f34d9b9eb1 upstream. Fix the initialisation of older Quatech serial cards which are fitted with the AMCC PCI Matchmaker interface chip. Signed-off-by: Jonathan Woithe (jwoithe@just42.net) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06serial: add support for 200 v3 series Titan cardYegor Yefremov
commit 48c0247d7b7bf58abb85a39021099529df365c4d upstream. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06tty/serial: at91: disable uart timer at start of shutdownMarek Roszko
commit 8bc661bfc0c2d221e209f4205bdaaf574d50100c upstream. The uart timer will schedule a tasklet when it fires. It is possible that it can fire inside _shutdown before it is killed in the dma and pdc cleanup routines. This causes a tasklet that exists after the port is shutdown, so when the kernel finally executes it, it panics as the tty port is NULL. This is a somewhat rare condition but its possible if a program keeps on opening/closing the port. It has been observed in particular with systemd boot messages that were causing a kernel panic because of this behavior. Moving the timer deletion to the beginning of the function stops a tasklet from being scheduled unexpectedly. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> [nicolas.ferre@atmel.com: modify commit message, call setup_timer() in any case] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06tty/serial: at91: reset rx_ring when port is shutdownMark Deneen
commit bb7e73c598fb226c75f7625088a8f6a45a0fc892 upstream. When using RX DMA, the driver won't pass any data to the uart layer until the buffer is flipped. When the port is shutdown, the dma buffers are unmapped, but the head and tail of the ring buffer are not reseted. Since the serial console will keep the port open, this will only present itself when the uart is not shared. To reproduce the issue, with an unpatched driver, run a getty on /dev/ttyS0 with no serial console and exit. Getty will exit, and when the new one returns you will be unable to log in. If you hold down a key long enough to fill the DMA buffer and flip it, you can then log in. Signed-off-by: Mark Deneen <mdeneen@gmail.com> Acked-by: Leilei Zhao <leilei.zhao@atmel.com> [nicolas.ferre@atmel.com: adapt to mainline kernel, handle !DMA case] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06tty/serial: at91: fix race condition in atmel_serial_removeMarek Roszko
commit f50c995f9ebf064cea1368bf361c4e29679415b4 upstream. The _remove callback could be called when a tasklet is scheduled. tasklet_kill was called inside the function in order to free up any scheduled tasklets. However it was called after uart_remove_one_port which destroys tty references needed in the port for atmel_tasklet_func. Simply putting the tasklet_kill at the start of the function will prevent this conflict. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Leilei Zhao <leilei.zhao@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06tty/serial: at91: Handle shutdown more safelyMarek Roszko
commit 0cc7c6c7916b1b6f34350ff1473b80b9f7e459c0 upstream. Interrupts were being cleaned up late in the shutdown handler, it is possible that an interrupt can occur and schedule a tasklet that runs after the port is cleaned up. There is a null dereference due to this race condition with the following stacktrace: [<c02092b0>] (atmel_tasklet_func+0x514/0x814) from [<c001fd34>] (tasklet_action+0x70/0xa8) [<c001fd34>] (tasklet_action+0x70/0xa8) from [<c001f60c>] (__do_softirq+0x90/0x144) [<c001f60c>] (__do_softirq+0x90/0x144) from [<c001fa18>] (irq_exit+0x40/0x4c) [<c001fa18>] (irq_exit+0x40/0x4c) from [<c000e298>] (handle_IRQ+0x64/0x84) [<c000e298>] (handle_IRQ+0x64/0x84) from [<c000d6c0>] (__irq_svc+0x40/0x50) [<c000d6c0>] (__irq_svc+0x40/0x50) from [<c0208060>] (atmel_rx_dma_release+0x88/0xb8) [<c0208060>] (atmel_rx_dma_release+0x88/0xb8) from [<c0209740>] (atmel_shutdown+0x104/0x160) [<c0209740>] (atmel_shutdown+0x104/0x160) from [<c0205e8c>] (uart_port_shutdown+0x2c/0x38) Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Leilei Zhao <leilei.zhao@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25serial: amba-pl011: use port lock to guard control register accessJon Medhurst
commit fe43390702a1b5741fdf217063b05c7612b38303 upstream. When the pl011 is being used for a console, pl011_console_write forces the control register (CR) to enable the UART for transmission and then restores this to the original value afterwards. It does this while holding the port lock. Unfortunately, when the uart is started or shutdown - say in response to userland using the serial device for a terminal - then this updates the control register without any locking. This means we can have pl011_console_write Save CR pl011_startup Initialise CR, e.g. enable receive pl011_console_write Restore old CR with receive not enabled this result is a serial port which doesn't respond to any input. A similar race in reverse could happen when the device is shutdown. We can fix these problems by taking the port lock when updating CR. Signed-off-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09serial: 8250_dw: add new ACPI IDsMika Westerberg
commit d24c195f90cb1adb178d26d84c722d4b9e551e05 upstream. Newer Intel PCHs with LPSS have the same Designware controllers than Haswell but ACPI IDs are different. Add these IDs to the driver list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09TTY: pmac_zilog, check existence of ports in pmz_console_init()Geert Uytterhoeven
commit dc1dc2f8a5dd863bf2e79f338fc3ae29e99c683a upstream. When booting a multi-platform m68k kernel on a non-Mac with "console=ttyS0" on the kernel command line, it crashes with: Unable to handle kernel NULL pointer dereference at virtual address (null) Oops: 00000000 PC: [<0013ad28>] __pmz_startup+0x32/0x2a0 ... Call Trace: [<002c5d3e>] pmz_console_setup+0x64/0xe4 The normal tty driver doesn't crash, because init_pmz() checks pmz_ports_count again after calling pmz_probe(). In the serial console initialization path, pmz_console_init() doesn't do this, causing the driver to crash later. Add a check for pmz_ports_count to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17tty/serial: at91: fix uart/usart selection for older productsNicolas Ferre
Since commit 055560b04a8cd063aea916fd083b7aec02c2adb8 (serial: at91: distinguish usart and uart) the older products which do not have a name field in their register map are unable to use their serial output. As the main console output is usually the serial interface (aka DBGU) it is pretty unfortunate. So, instead of failing during probe() we just silently configure the serial peripheral as an uart. It allows us to use these serial outputs. The proper solution is proposed in another patch. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-16serial: vt8500: add missing bracesRoel Kluin
Due to missing braces on an if statement, in presence of a device_node a port was always assigned -1, regardless of any alias entries in the device tree. Conversely, if device_node was NULL, an unitialized port ended up being used. This patch adds the missing braces, fixing the issues. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-07Revert "serial: i.MX: evaluate linux,stdout-path property"Greg Kroah-Hartman
This reverts commit f7d2c0bbdb7b784cc035cacb7d36b379ba1c3bef, as it causes build errors when the driver is built as a module. Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17serial: pch_uart: remove unnecessary tty_port_tty_getJohan Hovold
Remove unused tty-reference from dma-rx path which was left after the recent tty-port conversions. Also remove a redundant port initialisation while at it. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17serial: pch_uart: fix tty-kref leak in dma-rx pathJohan Hovold
Fix tty_kref leak when tty_buffer_request room fails in dma-rx path. Note that the tty ref isn't really needed anymore, but as the leak has always been there, fixing it before removing should makes it easier to backport the fix. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17serial: pch_uart: fix tty-kref leak in rx-error pathJohan Hovold
Fix tty-kref leak introduced by commit 384e301e ("pch_uart: fix a deadlock when pch_uart as console") which never put its tty reference. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17serial: tegra: fix tty-kref leakJohan Hovold
Fix potential tty-kref leak in stop_rx path. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-06Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Device tree and bindings updates for 3.12. General additions of various on-chip and on-board peripherals on various platforms as support gets added. Some of the bigger changes are: - Addition of (new) PCI-e support on Tegra. - More Tegra4 support, including PMC configuration for Dalmore. - Addition of a new board for Exynos4 (trats2) and more bindings for 4x12 IP. - Addition of Allwinner A20 and A31 SoC and board files. - Move of the ST Ericsson device tree files to now use ste-* prefix. - More move of hardware description of shmobile platforms to DT. - Two new board dts files for Freescale MXs" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits) dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. ARM: at91/dt: sam9x5ek: add sound configuration ARM: at91/dt: sam9x5ek: enable SSC ARM: at91/dt: sam9x5ek: add WM8731 codec ARM: at91/dt: sam9x5: add SSC DMA parameters ARM: at91/dt: add at91rm9200 PQFP package version ARM: at91: at91rm9200: set default mmc0 pinctrl-names ARM: at91: at91sam9n12: correct pin number of gpio-key ARM: at91: at91sam9n12: add qt1070 support ARM: at91: at91sam9n12: add pinctrl of TWI ARM: at91: Add PMU support for sama5d3 ARM: at91: at91sam9260: add missing pinctrl-names on mmc ARM: tegra: configure power off for Dalmore ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: sun7i: Add Olimex A20-Olinuxino-Micro support ARM: sun7i: Add Allwinner A20 DTSI ...
2013-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull Tile arch updates from Chris Metcalf: "These changes bring in a bunch of new functionality that has been maintained internally at Tilera over the last year, plus other stray bits of work that I've taken into the tile tree from other folks. The changes include some PCI root complex work, interrupt-driven console support, support for performing fast-path unaligned data fixups by kernel-based JIT code generation, CONFIG_PREEMPT support, vDSO support for gettimeofday(), a serial driver for the tilegx on-chip UART, KGDB support, more optimized string routines, support for ftrace and kprobes, improved ASLR, and many bug fixes. We also remove support for the old TILE64 chip, which is no longer buildable" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits) tile: refresh tile defconfig files tile: rework <asm/cmpxchg.h> tile PCI RC: make default consistent DMA mask 32-bit tile: add null check for kzalloc in tile/kernel/setup.c tile: make __write_once a synonym for __read_mostly tile: remove support for TILE64 tile: use asm-generic/bitops/builtin-*.h tile: eliminate no-op "noatomichash" boot argument tile: use standard tile_bundle_bits type in traps.c tile: simplify code referencing hypervisor API addresses tile: change <asm/system.h> to <asm/switch_to.h> in comments tile: mark pcibios_init() as __init tile: check for correct compiler earlier in asm-offsets.c tile: use standard 'generic-y' model for <asm/hw_irq.h> tile: use asm-generic version of <asm/local64.h> tile PCI RC: add comment about "PCI hole" problem tile: remove DEBUG_EXTRA_FLAGS kernel config option tile: add virt_to_kpte() API and clean up and document behavior tile: support FRAME_POINTER tile: support reporting Tilera hypervisor statistics ...
2013-09-06Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "Here's the powerpc batch for this merge window. Some of the highlights are: - A bunch of endian fixes ! We don't have full LE support yet in that release but this contains a lot of fixes all over arch/powerpc to use the proper accessors, call the firmware with the right endian mode, etc... - A few updates to our "powernv" platform (non-virtualized, the one to run KVM on), among other, support for bridging the P8 LPC bus for UARTs, support and some EEH fixes. - Some mpc51xx clock API cleanups in preparation for a clock API overhaul - A pile of cleanups of our old math emulation code, including better support for using it to emulate optional FP instructions on embedded chips that otherwise have a HW FPU. - Some infrastructure in selftest, for powerpc now, but could be generalized, initially used by some tests for our perf instruction counting code. - A pile of fixes for hotplug on pseries (that was seriously bitrotting) - The usual slew of freescale embedded updates, new boards, 64-bit hiberation support, e6500 core PMU support, etc..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc: Correct FSCR bit definitions powerpc/xmon: Fix printing of set of CPUs in xmon powerpc/pseries: Move lparcfg.c to platforms/pseries powerpc/powernv: Return secondary CPUs to firmware on kexec powerpc/btext: Fix CONFIG_PPC_EARLY_DEBUG_BOOTX on ppc32 powerpc: Cleanup handling of the DSCR bit in the FSCR register powerpc/pseries: Child nodes are not detached by dlpar_detach_node powerpc/pseries: Add mising of_node_put in delete_dt_node powerpc/pseries: Make dlpar_configure_connector parent node aware powerpc/pseries: Do all node initialization in dlpar_parse_cc_node powerpc/pseries: Fix parsing of initial node path in update_dt_node powerpc/pseries: Pack update_props_workarea to map correctly to rtas buffer header powerpc/pseries: Fix over writing of rtas return code in update_dt_node powerpc/pseries: Fix creation of loop in device node property list powerpc: Skip emulating & leave interrupts off for kernel program checks powerpc: Add more exception trampolines for hypervisor exceptions powerpc: Fix location and rename exception trampolines powerpc: Add more trap names to xmon powerpc/pseries: Add a warning in the case of cross-cpu VPA registration powerpc: Update the 00-Index in Documentation/powerpc ...
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "The usual trivial updates all over the tree -- mostly typo fixes and documentation updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits) doc: Documentation/cputopology.txt fix typo treewide: Convert retrun typos to return Fix comment typo for init_cma_reserved_pageblock Documentation/trace: Correcting and extending tracepoint documentation mm/hotplug: fix a typo in Documentation/memory-hotplug.txt power: Documentation: Update s2ram link doc: fix a typo in Documentation/00-INDEX Documentation/printk-formats.txt: No casts needed for u64/s64 doc: Fix typo "is is" in Documentations treewide: Fix printks with 0x%# zram: doc fixes Documentation/kmemcheck: update kmemcheck documentation doc: documentation/hwspinlock.txt fix typo PM / Hibernate: add section for resume options doc: filesystems : Fix typo in Documentations/filesystems scsi/megaraid fixed several typos in comments ppc: init_32: Fix error typo "CONFIG_START_KERNEL" treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks page_isolation: Fix a comment typo in test_pages_isolated() doc: fix a typo about irq affinity ...
2013-09-04treewide: Convert retrun typos to returnJoe Perches
Tyops should be fixed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-03tilegx: Add tty serial support for TILE-Gx on-chip UARTChris Metcalf
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30serial: imx: initialize the local variableHuang Shijie
The slave_config is not initialized, so some of its fields may be set with random data which may causes the failure in the following dmaengine_prep_slave_sg(). This patch fixes this issue. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30tty: ar933x_uart: add device tree support and binding documentationGabor Juhos
Modify the probe routine to get the port line number from device tree if the 'of_node' is populated in the platform device. The driver can be built as module, thus add an OF specific module device table as well to support module auto loading. This makes it possible to use the driver for AR9330 UART devices specified in device tree. Cc: devicetree@vger.kernel.org Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30tty: ar933x_uart: allow to build the driver as a moduleGabor Juhos
Change the SERIAL_AR933X Kconfig option from 'bool' to 'tristate' in order to allow to build the driver as a module. Also extend the help text of the option to reflect that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29dts: Deprecate ALTR as a vendor prefixDinh Nguyen
Because most of the vendor prefixes are lower case, deprecate the vendor prefix "ALTR" in place of "altr" for Altera Corp.. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: devicetree@vger.kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-28tty: ar933x_uart: use config_enabled() macro to clean up ifdefsGabor Juhos
Add a new ar933x_uart_console_enabled() helper function which uses the config_enable(CONFIG_SERIAL_AR933X_CONSOLE) macro to decide if the console support is enabled or not. Remove the 'ifdef CONFIG_SERIAL_AR933X_CONSOLE' statements and use the new helper function to conditionally enable console support instead. If CONFIG_SERIAL_AR933X_CONSOLE is not enabled, the new helper function will become a null stub which allows the compiler to optimize out the unused console specific functions/variables. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-28tty: ar933x_uart: remove superfluous assignment of ar933x_uart_driver.nrGabor Juhos
The 'nr' field of the 'ar933x_uart_driver' structure is already initialized with the same value in the static declaration. Remove the superfluous assignment in the module init routine. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-28tty: ar933x_uart: use the clk API to get the uart clockGabor Juhos
The AR933x UARTs are only used on the Atheros AR933x SoCs. The base clock frequency of the UART is passed to the driver via platform data. The SoC support code implements the generic clock API, and the clock rate can be retrieved via that. Update the code to get the clock rate via the generic clock API instead of using the platform data. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27tty: serial: cpm_uart: Adding proper request of GPIO used by cpm_uart driverChristophe Leroy
cpm_uart serial driver uses GPIO for control signals. In order to be used properly, GPIOs have to be reserved. Comment in gpiolib.c considers illegal the use of GPIOs without requesting them. In addition, the direction of the GPIO has to be set properly. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27serial: sirf: fix the amount of serial portsQipan Li
SiRFprimaII has three uart ports and three USP-based ports, so there are totally six lines instead of five. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27serial: sirf: define macro for some magic numbers of USPQipan Li
this patch clears some magic numbers for offset and bitshift of USP registers. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27serial: icom: move array overflow checks earlierDan Carpenter
This code does an annoying thing where it writes to the array and then checks later for array overflows. I don't know if it's actually possible to overflow but let's check before using the array index. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27serial: st-asc: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27msm_serial: Send more than 1 character on the console w/ UARTDMStephen Boyd
We recently added support to send more than one character at a time for UARTDM hardware but we didn't add the same support in the console code path. Add support here to speed up console messages on UARTDM hardware. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27msm_serial: Add support for non-GSBI UARTDM devicesStephen Boyd
Not all UARTDM hardware is part of a GSBI complex. Add support for these devices and fix a bug where we assumed uartdm meant the hardware was part of a GSBI complex. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27msm_serial: Switch clock consumer strings and simplify codeStephen Boyd
In downstream kernel we've standardized the clock consumer names that MSM device drivers use. Replace the uart specific clock names in this driver with the more standard 'core' and 'iface' names. Also simplify the code by assuming that clk_prepare_enable and clk_disable_unprepare() will properly check for NULL pointers (it will because MSM uses the common clock framework). Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2026-08-12 19:31:19 +0000