summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Collapse)Author
2018-08-22serial: 8250_dw: always set baud rate in dw8250_set_termiosChen Hu
commit dfcab6ba573445c703235ab6c83758eec12d7f28 upstream. dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is NULL. This happens during resume. Call Trace: ... [ 54.928108] dw8250_set_termios+0x162/0x170 [ 54.928114] serial8250_set_termios+0x17/0x20 [ 54.928117] uart_change_speed+0x64/0x160 [ 54.928119] uart_resume_port ... So the baud rate is not restored after S3 and breaks the apps who use UART, for example, console and bluetooth etc. We address this issue by setting the baud rate irrespective of arg "old", just like the drivers for other 8250 IPs. This is tested with Intel Broxton platform. Signed-off-by: Chen Hu <hu1.chen@intel.com> Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms") Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding versionDaniel Wagner
commit 8afb1d2c12163f77777f84616a8e9444d0050ebe upstream. Commit 40f70c03e33a ("serial: sh-sci: add locking to console write function to avoid SMP lockup") copied the strategy to avoid locking problems in conjuncture with the console from the UART8250 driver. Instead using directly spin_{try}lock_irqsave(), local_irq_save() followed by spin_{try}lock() was used. While this is correct on mainline, for -rt it is a problem. spin_{try}lock() will check if it is running in a valid context. Since the local_irq_save() has already been executed, the context has changed and spin_{try}lock() will complain. The reason why spin_{try}lock() complains is that on -rt the spin locks are turned into mutexes and therefore can sleep. Sleeping with interrupts disabled is not valid. BUG: sleeping function called from invalid context at /home/wagi/work/rt/v4.4-cip-rt/kernel/locking/rtmutex.c:995 in_atomic(): 0, irqs_disabled(): 128, pid: 778, name: irq/76-eth0 CPU: 0 PID: 778 Comm: irq/76-eth0 Not tainted 4.4.126-test-cip22-rt14-00403-gcd03665c8318 #12 Hardware name: Generic RZ/G1 (Flattened Device Tree) Backtrace: [<c00140a0>] (dump_backtrace) from [<c001424c>] (show_stack+0x18/0x1c) r7:c06b01f0 r6:60010193 r5:00000000 r4:c06b01f0 [<c0014234>] (show_stack) from [<c01d3c94>] (dump_stack+0x78/0x94) [<c01d3c1c>] (dump_stack) from [<c004c134>] (___might_sleep+0x134/0x194) r7:60010113 r6:c06d3559 r5:00000000 r4:ffffe000 [<c004c000>] (___might_sleep) from [<c04ded60>] (rt_spin_lock+0x20/0x74) r5:c06f4d60 r4:c06f4d60 [<c04ded40>] (rt_spin_lock) from [<c02577e4>] (serial_console_write+0x100/0x118) r5:c06f4d60 r4:c06f4d60 [<c02576e4>] (serial_console_write) from [<c0061060>] (call_console_drivers.constprop.15+0x10c/0x124) r10:c06d2894 r9:c04e18b0 r8:00000028 r7:00000000 r6:c06d3559 r5:c06d2798 r4:c06b9914 r3:c02576e4 [<c0060f54>] (call_console_drivers.constprop.15) from [<c0062984>] (console_unlock+0x32c/0x430) r10:c06d30d8 r9:00000028 r8:c06dd518 r7:00000005 r6:00000000 r5:c06d2798 r4:c06d2798 r3:00000028 [<c0062658>] (console_unlock) from [<c0062e1c>] (vprintk_emit+0x394/0x4f0) r10:c06d2798 r9:c06d30ee r8:00000006 r7:00000005 r6:c06a78fc r5:00000027 r4:00000003 [<c0062a88>] (vprintk_emit) from [<c0062fa0>] (vprintk+0x28/0x30) r10:c060bd46 r9:00001000 r8:c06b9a90 r7:c06b9a90 r6:c06b994c r5:c06b9a3c r4:c0062fa8 [<c0062f78>] (vprintk) from [<c0062fb8>] (vprintk_default+0x10/0x14) [<c0062fa8>] (vprintk_default) from [<c009cd30>] (printk+0x78/0x84) [<c009ccbc>] (printk) from [<c025afdc>] (credit_entropy_bits+0x17c/0x2cc) r3:00000001 r2:decade60 r1:c061a5ee r0:c061a523 r4:00000006 [<c025ae60>] (credit_entropy_bits) from [<c025bf74>] (add_interrupt_randomness+0x160/0x178) r10:466e7196 r9:1f536000 r8:fffeef74 r7:00000000 r6:c06b9a60 r5:c06b9a3c r4:dfbcf680 [<c025be14>] (add_interrupt_randomness) from [<c006536c>] (irq_thread+0x1e8/0x248) r10:c006537c r9:c06cdf21 r8:c0064fcc r7:df791c24 r6:df791c00 r5:ffffe000 r4:df525180 [<c0065184>] (irq_thread) from [<c003fba4>] (kthread+0x108/0x11c) r10:00000000 r9:00000000 r8:c0065184 r7:df791c00 r6:00000000 r5:df791d00 r4:decac000 [<c003fa9c>] (kthread) from [<c00101b8>] (ret_from_fork+0x14/0x3c) r8:00000000 r7:00000000 r6:00000000 r5:c003fa9c r4:df791d00 Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> [dw: Backported to 4.4.] Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-16serial: samsung: fix maxburst parameter for DMA transactionsMarek Szyprowski
commit aa2f80e752c75e593b3820f42c416ed9458fa73e upstream. The best granularity of residue that DMA engine can report is in the BURST units, so the serial driver must use MAXBURST = 1 and DMA_SLAVE_BUSWIDTH_1_BYTE if it relies on exact number of bytes transferred by DMA engine. Fixes: 62c37eedb74c ("serial: samsung: add dma reqest/release functions") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: arc_uart: Fix out-of-bounds access through DT aliasGeert Uytterhoeven
[ Upstream commit f9f5786987e81d166c60833edcb7d1836aa16944 ] The arc_uart_ports[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Note that the array size is defined by a Kconfig symbol (CONFIG_SERIAL_ARC_NR_PORTS), so this can even be triggered using a legitimate DTB. Fixes: ea28fd56fcde69af ("serial/arc-uart: switch to devicetree based probing") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: fsl_lpuart: Fix out-of-bounds access through DT aliasGeert Uytterhoeven
[ Upstream commit ffab87fdecc655cc676f8be8dd1a2c5e22bd6d47 ] The lpuart_ports[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: c9e2e946fb0ba5d2 ("tty: serial: add Freescale lpuart driver support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: imx: Fix out-of-bounds access through serial port indexGeert Uytterhoeven
[ Upstream commit 5673444821406dda5fc25e4b52aca419f8065a19 ] The imx_ports[] array is indexed using a value derived from the "serialN" alias in DT, or from platform data, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: ff05967a07225ab6 ("serial/imx: add of_alias_get_id() reference back") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: mxs-auart: Fix out-of-bounds access through serial port indexGeert Uytterhoeven
[ Upstream commit dd345a31bfdec350d2593e6de5964e55c7f19c76 ] The auart_port[] array is indexed using a value derived from the "serialN" alias in DT, or from platform data, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: 1ea6607d4cdc9179 ("serial: mxs-auart: Allow device tree probing") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: samsung: Fix out-of-bounds access through serial port indexGeert Uytterhoeven
[ Upstream commit 49ee23b71877831ac087d6083f6f397dc19c9664 ] The s3c24xx_serial_ports[] array is indexed using a value derived from the "serialN" alias in DT, or from an incrementing probe index, which may lead to an out-of-bounds access. Fix this by adding a range check. Note that the array size is defined by a Kconfig symbol (CONFIG_SERIAL_SAMSUNG_UARTS), so this can even be triggered using a legitimate DTB or legitimate board code. Fixes: 13a9f6c64fdc55eb ("serial: samsung: Consider DT alias when probing ports") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: xuartps: Fix out-of-bounds access through DT aliasGeert Uytterhoeven
[ Upstream commit e7d75e18d0fc3f7193b65282b651f980c778d935 ] The cdns_uart_port[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: 928e9263492069ee ("tty: xuartps: Initialize ports according to aliases") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-02serial: mctrl_gpio: Add missing module licenseRomain Izard
commit 82a3f87f6e80e0bf7978152021eb8938976721cb upstream. As the mctrl_gpio driver can be built as a module, it needs to have its license specified with MODULE_LICENSE. Otherwise, it cannot access required symbols exported through EXPORT_SYMBOL_GPL. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Daniel Wagner <wagi@monom.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-02serial: mctrl_gpio: export mctrl_gpio_disable_ms and mctrl_gpio_initUwe Kleine-König
commit 4f71a2e0a282611e55bacb60b564eaef5d16c27b upstream. To be able to make use of the mctrl-gpio helper from a module these functions must be exported. This was forgotten in the commit introducing support interrupt handling for these functions (while it was done for mctrl_gpio_enable_ms, *sigh*). Fixes: ce59e48fdbad ("serial: mctrl_gpio: implement interrupt handling") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Daniel Wagner <wagi@monom.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13Fix serial console on SNI RM400 machinesThomas Bogendoerfer
[ Upstream commit e279e6d98e0cf2c2fe008b3c29042b92f0e17b1d ] sccnxp driver doesn't get the correct uart clock rate, if CONFIG_HAVE_CLOCK is disabled. Correct usage of clk API to make it work with/without it. Fixes: 90efa75f7ab0 (serial: sccnxp: Using CLK API for getting UART clock) Suggested-by: Russell King - ARM Linux <linux@armlinux.org.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13serial: sh-sci: Fix race condition causing garbage during shutdownGeert Uytterhoeven
[ Upstream commit 1cf4a7efdc71cab84c42cfea7200608711ea954f ] If DMA is enabled and used, a burst of old data may be seen on the serial console during "poweroff" or "reboot". uart_flush_buffer() clears the circular buffer, but sci_port.tx_dma_len is not reset. This leads to a circular buffer overflow, dumping (UART_XMIT_SIZE - sci_port.tx_dma_len) bytes. To fix this, add a .flush_buffer() callback that resets sci_port.tx_dma_len. Inspired by commit 31ca2c63fdc0aee7 ("tty/serial: atmel: fix race condition (TX+DMA)"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13serial: 8250: omap: Disable DMA for console UARTVignesh R
[ Upstream commit 84b40e3b57eef1417479c00490dd4c9f6e5ffdbc ] Kernel always writes log messages to console via serial8250_console_write()->serial8250_console_putchar() which directly accesses UART_TX register _without_ using DMA. But, if other processes like systemd using same UART port, then these writes are handled by a different code flow using 8250_omap driver where there is provision to use DMA. It seems that it is possible that both DMA and CPU might simultaneously put data to UART FIFO and lead to potential loss of data due to FIFO overflow and weird data corruption. This happens when both kernel console and userspace tries to write simultaneously to the same UART port. Therefore, disable DMA on kernel console port to avoid potential race between CPU and DMA. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18serial: 8250_pci: Add Brainboxes UC-260 4 port serial deviceNikola Ciprich
commit 9f2068f35729948bde84d87a40d135015911345d upstream. Add PCI ids for two variants of Brainboxes UC-260 quad port PCI serial cards. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18tty/serial: atmel: add new version check for usartJonas Danielsson
commit fd63a8903a2c40425a9811c3371dd4d0f42c0ad3 upstream. On our at91sam9260 based board the usart0 and usart1 ports report their versions (ATMEL_US_VERSION) as 0x10302. This version is not included in the current checks in the driver. Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18serial: sh-sci: prevent lockup on full TTY buffersUlrich Hecht
commit 7842055bfce4bf0170d0f61df8b2add8399697be upstream. When the TTY buffers fill up to the configured maximum, a system lockup occurs: [ 598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 598.825796] 0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1 [ 598.832577] (detected by 3, t=62517 jiffies, g=296, c=295, q=126) [ 598.838755] Task dump for CPU 0: [ 598.841977] swapper/0 R running task 0 0 0 0x00000022 [ 598.849023] Call trace: [ 598.851476] __switch_to+0x98/0xb0 [ 598.854870] (null) This can be prevented by doing a dummy read of the RX data register. This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0; reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms as well. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable <stable@vger.kernel.org> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25serial: 8250_mid: fix broken DMA dependencyHeikki Krogerus
commit 0ff4230584320b2153752ba54e2e8edbd6addf2c upstream. In order to enable HSU DMA PCI driver, the HSU DMA Engine must be enabled. This add a check for that. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTSFabio Estevam
commit 38b1f0fb42f772b8c9aac53593883a18ff5eb9d7 upstream. The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS lines, so only allow such wakeup method when the system actually has RTS/CTS support. Fixes: bc85734b126f ("serial: imx: allow waking up on RTSD") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Martin Kaiser <martin@kaiser.cx> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09serial: 8250: Preserve DLD[7:4] for PORT_XR17V35XAaron Sierra
[ Upstream commit 0ab84da2e076948c49d36197ee7d254125c53eab ] The upper four bits of the XR17V35x fractional divisor register (DLD) control general chip function (RS-485 direction pin polarity, multidrop mode, XON/XOFF parity check, and fast IR mode). Don't allow these bits to be clobbered when setting the baudrate. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()Lukas Wunner
[ Upstream commit 3236a965486ba0c6043cf2c7b51943d8b382ae29 ] This driver's ->rs485_config callback checks if SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND have the same value. If they do, it means the user has passed in invalid data with the TIOCSRS485 ioctl() since RTS must have a different polarity when sending and when not sending. In this case, rs485 mode is not enabled (the RS485_URA bit is not set in the RS485 Enable Register) and this is supposed to be signaled back to the user by clearing the SER_RS485_ENABLED bit in struct serial_rs485 ... except a missing tilde character is preventing that from happening. Fixes: 28e3fb6c4dce ("serial: Add support for Fintek F81216A LPC to 4 UART") Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: "Ji-Ze Hong (Peter Hong)" <hpeter@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09serial: 8250_pci: Add Amazon PCI serial device IDMatt Wilson
commit 3bfd1300abfe3adb18e84a89d97a0e82a22124bb upstream. This device will be used in future Amazon EC2 instances as the primary serial port (i.e., data sent to this port will be available via the GetConsoleOuput [1] EC2 API). [1] http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetConsoleOutput.html Signed-off-by: Matt Wilson <msw@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24serial: omap: Fix EFR write on RTS deassertionLukas Wunner
commit 2a71de2f7366fb1aec632116d0549ec56d6a3940 upstream. Commit 348f9bb31c56 ("serial: omap: Fix RTS handling") sought to enable auto RTS upon manual RTS assertion and disable it on deassertion. However it seems the latter was done incorrectly, it clears all bits in the Extended Features Register *except* auto RTS. Fixes: 348f9bb31c56 ("serial: omap: Fix RTS handling") Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15serial: sh-sci: Fix register offsets for the IRDA serial portLaurent Pinchart
[ Upstream commit a752ba18af8285e3eeda572f40dddaebff0c3621 ] Even though most of its registers are 8-bit wide, the IRDA has two 16-bit registers that make it a 16-bit peripheral and not a 8-bit peripheral with addresses shifted by one. Fix the registers offset in the driver and the platform data regshift value. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21sparc64: Migrate hvcons irq to panicked cpuVijay Kumar
[ Upstream commit 7dd4fcf5b70694dc961eb6b954673e4fc9730dbd ] On panic, all other CPUs are stopped except the one which had hit panic. To keep console alive, we need to migrate hvcons irq to panicked CPU. Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-26serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'Christophe JAILLET
commit be40597a1bc173bf9dadccdf5388b956f620ae8f upstream. UARTn_FRAME_PARITY_ODD is 0x0300 UARTn_FRAME_PARITY_EVEN is 0x0200 So if the UART is configured for EVEN parity, it would be reported as ODD. Fix it by correctly testing if the 2 bits are set. Fixes: 3afbd89c9639 ("serial/efm32: add new driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14serial: sh-sci: Fix panic when serial console and DMA are enabledTakatoshi Akiyama
commit 3c9101766b502a0163d1d437fada5801cf616be2 upstream. This patch fixes an issue that kernel panic happens when DMA is enabled and we press enter key while the kernel booting on the serial console. * An interrupt may occur after sci_request_irq(). * DMA transfer area is initialized by setup_timer() in sci_request_dma() and used in interrupt. If an interrupt occurred between sci_request_irq() and setup_timer() in sci_request_dma(), DMA transfer area has not been initialized yet. So, this patch changes the order of sci_request_irq() and sci_request_dma(). Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.") Signed-off-by: Takatoshi Akiyama <takatoshi.akiyama.kj@ps.hitachi-solutions.com> [Shimoda changes the commit log] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14serial: ifx6x60: fix use-after-free on module unloadJohan Hovold
commit 1e948479b3d63e3ac0ecca13cbf4921c7d17c168 upstream. Make sure to deregister the SPI driver before releasing the tty driver to avoid use-after-free in the SPI remove callback where the tty devices are deregistered. Fixes: 72d4724ea54c ("serial: ifx6x60: Add modem power off function in the platform reboot process") Cc: Jun Chen <jun.d.chen@intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20serial: omap: suspend device on probe errorsJohan Hovold
commit 77e6fe7fd2b7cba0bf2f2dc8cde51d7b9a35bf74 upstream. Make sure to actually suspend the device before returning after a failed (or deferred) probe. Note that autosuspend must be disabled before runtime pm is disabled in order to balance the usage count due to a negative autosuspend delay as well as to make the final put suspend the device synchronously. Fixes: 388bc2622680 ("omap-serial: Fix the error handling in the omap_serial probe") Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20serial: omap: fix runtime-pm handling on unbindJohan Hovold
commit 099bd73dc17ed77aa8c98323e043613b6e8f54fc upstream. An unbalanced and misplaced synchronous put was used to suspend the device on driver unbind, something which with a likewise misplaced pm_runtime_disable leads to external aborts when an open port is being removed. Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010 ... [<c046e760>] (serial_omap_set_mctrl) from [<c046a064>] (uart_update_mctrl+0x50/0x60) [<c046a064>] (uart_update_mctrl) from [<c046a400>] (uart_shutdown+0xbc/0x138) [<c046a400>] (uart_shutdown) from [<c046bd2c>] (uart_hangup+0x94/0x190) [<c046bd2c>] (uart_hangup) from [<c045b760>] (__tty_hangup+0x404/0x41c) [<c045b760>] (__tty_hangup) from [<c045b794>] (tty_vhangup+0x1c/0x20) [<c045b794>] (tty_vhangup) from [<c046ccc8>] (uart_remove_one_port+0xec/0x260) [<c046ccc8>] (uart_remove_one_port) from [<c046ef4c>] (serial_omap_remove+0x40/0x60) [<c046ef4c>] (serial_omap_remove) from [<c04845e8>] (platform_drv_remove+0x34/0x4c) Fix this up by resuming the device before deregistering the port and by suspending and disabling runtime pm only after the port has been removed. Also make sure to disable autosuspend before disabling runtime pm so that the usage count is balanced and device actually suspended before returning. Note that due to a negative autosuspend delay being set in probe, the unbalanced put would actually suspend the device on first driver unbind, while rebinding and again unbinding would result in a negative power.usage_count. Fixes: 7e9c8e7dbf3b ("serial: omap: make sure to suspend device before remove") Cc: Felipe Balbi <balbi@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20serial: samsung: Use right device for DMA-mapping callsMarek Szyprowski
commit 768d64f491a530062ddad50e016fb27125f8bd7c upstream. Driver should provide its own struct device for all DMA-mapping calls instead of extracting device pointer from DMA engine channel. Although this is harmless from the driver operation perspective on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes following DMA API debug warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1241 check_sync+0x520/0x9f4 samsung-uart 12c20000.serial: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000006df0f580] [size=64 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00137-g07ca963 #51 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24) [<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0) [<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180) [<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50) [<c01395a4>] (warn_slowpath_fmt) from [<c0729058>] (check_sync+0x520/0x9f4) [<c0729058>] (check_sync) from [<c072967c>] (debug_dma_sync_single_for_device+0x88/0xc8) [<c072967c>] (debug_dma_sync_single_for_device) from [<c0803c10>] (s3c24xx_serial_start_tx_dma+0x100/0x2f8) [<c0803c10>] (s3c24xx_serial_start_tx_dma) from [<c0804338>] (s3c24xx_serial_tx_chars+0x198/0x33c) Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Fixes: 62c37eedb74c8 ("serial: samsung: add dma reqest/release functions") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14serial: 8250_omap: Fix probe and remove for PM runtimeTony Lindgren
commit 4e0f5cc65098ea32a1e77baae74215b9bd5276b1 upstream. Otherwise the interconnect related code implementing PM runtime will produce these errors on a failed probe: omap_uart 48066000.serial: omap_device: omap_device_enable() called from invalid state 1 omap_uart 48066000.serial: use pm_runtime_put_sync_suspend() in driver? Note that we now also need to check for priv in omap8250_runtime_suspend() as it has not yet been registered if probe fails. And we need to use pm_runtime_put_sync() to properly idle the device like we already do in omap8250_remove(). Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-088250_pci: Fix potential use-after-free in error pathGabriel Krisman Bertazi
commit c130b666a9a711f985a0a44b58699ebe14bb7245 upstream. Commit f209fa03fc9d ("serial: 8250_pci: Detach low-level driver during PCI error recovery") introduces a potential use-after-free in case the pciserial_init_ports call in serial8250_io_resume fails, which may happen if a memory allocation fails or if the .init quirk failed for whatever reason). If this happen, further pci_get_drvdata will return a pointer to freed memory. This patch reworks the PCI recovery resume hook to restore the old priv structure in this case, which should be ok, since the ports were already detached. Such error during recovery causes us to give up on the recovery. Fixes: f209fa03fc9d ("serial: 8250_pci: Detach low-level driver during PCI error recovery") Reported-by: Michal Suchanek <msuchanek@suse.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-21tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is doneRichard Genoud
commit b389f173aaa1204d6dc1f299082a162eb0491545 upstream. When using RS485 in half duplex, RX should be enabled when TX is finished, and stopped when TX starts. Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA was used. So, collisions could happened. But disabling RX in atmel_start_tx() uncovered another bug: RX was enabled again in the wrong place (in atmel_tx_dma) instead of being enabled when TX is finished (in atmel_complete_tx_dma), so the transmission simply stopped. This bug was not triggered before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was never disabled before. Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem. Reported-by: Gil Weber <webergil@gmail.com> Fixes: 0058f0871efe7b01c6 Tested-by: Gil Weber <webergil@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Bryan Evenson <bevenson@melinkcorp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08tty/serial: atmel: fix TX path in atmel_console_write()Nicolas Ferre
commit 497e1e16f45c70574dc9922c7f75c642c2162119 upstream. A side effect of 89d8232411a8 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx") is that the console can be called with TX path disabled. Then the system would hang trying to push charecters out in atmel_console_putchar(). Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Fixes: 89d8232411a8 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08tty/serial: atmel: fix race condition (TX+DMA)Richard Genoud
commit 31ca2c63fdc0aee725cbd4f207c1256f5deaabde upstream. If uart_flush_buffer() is called between atmel_tx_dma() and atmel_complete_tx_dma(), the circular buffer has been cleared, but not atmel_port->tx_len. That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE - atmel_port->tx_len) bytes). Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30serial: 8250_pci: Detach low-level driver during PCI error recoverySumit Semwal
From: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> [ Upstream commit f209fa03fc9d131b3108c2e4936181eabab87416 ] During a PCI error recovery, like the ones provoked by EEH in the ppc64 platform, all IO to the device must be blocked while the recovery is completed. Current 8250_pci implementation only suspends the port instead of detaching it, which doesn't prevent incoming accesses like TIOCMGET and TIOCMSET calls from reaching the device. Those end up racing with the EEH recovery, crashing it. Similar races were also observed when opening the device and when shutting it down during recovery. This patch implements a more robust IO blockage for the 8250_pci recovery by unregistering the port at the beginning of the procedure and re-adding it afterwards. Since the port is detached from the uart layer, we can be sure that no request will make through to the device during recovery. This is similar to the solution used by the JSM serial driver. I thank Peter Hurley <peter@hurleysoftware.com> for valuable input on this one over one year ago. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-18serial: samsung: Continue to work if DMA request failsKrzysztof Kozlowski
commit f98c7bce570bdbe344b74ff5daa7dfeef3f22929 upstream. If DMA is not available (even when configured in DeviceTree), the driver will fail the startup procedure thus making serial console not available. For example this causes boot failure on QEMU ARMv7 (Exynos4210, SMDKC210): [    1.302575] OF: amba_device_add() failed (-19) for /amba/pdma@12680000 ... [   11.435732] samsung-uart 13800000.serial: DMA request failed [   72.963893] samsung-uart 13800000.serial: DMA request failed [   73.143361] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 DMA is not necessary for serial to work, so continue with UART startup after emitting a warning. Fixes: 62c37eedb74c ("serial: samsung: add dma reqest/release functions") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-15serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cardsIan Abbott
commit 1c9c858e2ff8ae8024a3d75d2ed080063af43754 upstream. The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports, respectively. The first 4 ports are implemented by an OX16PCI954 chip, and the second 4 ports are implemented by an OX16C954 chip on a local bus, bridged by the second PCI function of the OX16PCI954. The ports are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a non-standard oscillator frequency of 20 MHz (base_baud = 1250000). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26tty: serial: msm: Fix module autoloadJavier Martinez Canillas
commit abe81f3b8ed2996e1712d26d38ff6b73f582c616 upstream. If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/tty/serial/msm_serial.ko | grep alias $ After this patch: $ modinfo drivers/tty/serial/msm_serial.ko | grep alias alias: of:N*T*Cqcom,msm-uartdmC* alias: of:N*T*Cqcom,msm-uartdm alias: of:N*T*Cqcom,msm-uartC* alias: of:N*T*Cqcom,msm-uart Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_txRichard Genoud
commit 89d8232411a85b9a6b12fd5da4d07d8a138a8e0c upstream. If we don't disable the transmitter in atmel_stop_tx, the DMA buffer continues to send data until it is emptied. This cause problems with the flow control (CTS is asserted and data are still sent). So, disabling the transmitter in atmel_stop_tx is a sane thing to do. Tested on at91sam9g35-cm(DMA) Tested for regressions on sama5d2-xplained(Fifo) and at91sam9g20ek(PDC) Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09sc16is7xx: Drop bogus use of IRQF_ONESHOTJosh Cartwright
commit 04da73803c05dc1150ccc31cbf93e8cd56679c09 upstream. The use of IRQF_ONESHOT when registering an interrupt handler with request_irq() is non-sensical. Not only that, it also prevents the handler from being threaded when it otherwise should be w/ IRQ_FORCED_THREADING is enabled. This causes the following deadlock observed by Sean Nyekjaer on -rt: Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [..] rt_spin_lock_slowlock from queue_kthread_work queue_kthread_work from sc16is7xx_irq sc16is7xx_irq [sc16is7xx] from handle_irq_event_percpu handle_irq_event_percpu from handle_irq_event handle_irq_event from handle_level_irq handle_level_irq from generic_handle_irq generic_handle_irq from mxc_gpio_irq_handler mxc_gpio_irq_handler from mx3_gpio_irq_handler mx3_gpio_irq_handler from generic_handle_irq generic_handle_irq from __handle_domain_irq __handle_domain_irq from gic_handle_irq gic_handle_irq from __irq_svc __irq_svc from rt_spin_unlock rt_spin_unlock from kthread_worker_fn kthread_worker_fn from kthread kthread from ret_from_fork Fixes: 9e6f4ca3e567 ("sc16is7xx: use kthread_worker for tx_work and irq") Reported-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Josh Cartwright <joshc@ni.com> Cc: linux-rt-users@vger.kernel.org Cc: Jakub Kicinski <moorray3@wp.pl> Cc: linux-serial@vger.kernel.org Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-21sparc: serial: sunhv: fix a double lock bugDan Carpenter
[ Upstream commit 344e3c7734d5090b148c19ac6539b8947fed6767 ] We accidentally take the "port->lock" twice in a row. This old code was supposed to be deleted. Fixes: e58e241c1788 ('sparc: serial: Clean up the locking for -rt') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-18tty/serial: at91: fix hardware handshake on Atmel platformsRichard Genoud
commit 9bcffe7575b721d7b6d9b3090fe18809d9806e78 upstream. After commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), the hardware handshake wasn't functional anymore on Atmel platforms (beside SAMA5D2). To understand why, one has to understand the flag ATMEL_US_USMODE_HWHS first: Before commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), this flag was never set. Thus, the CTS/RTS where only handled by serial_core (and everything worked just fine). This commit introduced the use of the ATMEL_US_USMODE_HWHS flag, enabling it for all boards when the user space enables flow control. When the ATMEL_US_USMODE_HWHS is set, the Atmel USART controller handles a part of the flow control job: - disable the transmitter when the CTS pin gets high. - drive the RTS pin high when the DMA buffer transfer is completed or PDC RX buffer full or RX FIFO is beyond threshold. (depending on the controller version). NB: This feature is *not* mandatory for the flow control to work. (Nevertheless, it's very useful if low latencies are needed.) Now, the specifics of the ATMEL_US_USMODE_HWHS flag: - For platforms with DMAC and no FIFOs (sam9x25, sam9x35, sama5D3, sama5D4, sam9g15, sam9g25, sam9g35)* this feature simply doesn't work. ( source: https://lkml.org/lkml/2016/9/7/598 ) Tested it on sam9g35, the RTS pins always stays up, even when RXEN=1 or a new DMA transfer descriptor is set. => ATMEL_US_USMODE_HWHS must not be used for those platforms - For platforms with a PDC (sam926{0,1,3}, sam9g10, sam9g20, sam9g45, sam9g46)*, there's another kind of problem. Once the flag ATMEL_US_USMODE_HWHS is set, the RTS pin can't be driven anymore via RTSEN/RTSDIS in USART Control Register. The RTS pin can only be driven by enabling/disabling the receiver or setting RCR=RNCR=0 in the PDC (Receive (Next) Counter Register). => Doing this is beyond the scope of this patch and could add other bugs, so the original (and working) behaviour should be set for those platforms (meaning ATMEL_US_USMODE_HWHS flag should be unset). - For platforms with a FIFO (sama5d2)*, the RTS pin is driven according to the RX FIFO thresholds, and can be also driven by RTSEN/RTSDIS in USART Control Register. No problem here. (This was the use case of commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled")) NB: If the CTS pin declared as a GPIO in the DTS, (for instance cts-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_LOW>), the transmitter will be disabled. => ATMEL_US_USMODE_HWHS flag can be set for this platform ONLY IF the CTS pin is not a GPIO. So, the only case when ATMEL_US_USMODE_HWHS can be enabled is when (atmel_use_fifo(port) && !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) Tested on all Atmel USART controller flavours: AT91SAM9G35-CM (DMAC flavour), AT91SAM9G20-EK (PDC flavour), SAMA5D2xplained (FIFO flavour). * the list may not be exhaustive Fixes: 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nicolas.ferre@atmel.com: adapt to 4.4.x kernel for stable by adding the atmel_port variable declaration which was missing] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-22serial: 8250_dw: Check the data->pclk when get apb_pclkKefeng Wang
commit e16b46f190a22587898b331f9d58583b0b166c9a upstream. It should check the data->pclk, not data->clk when get apb_pclk. Fixes: c8ed99d4f6a8("serial: 8250_dw: Add support for deferred probing") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24serial: 8250: added acces i/o products quad and octal serial cardsJimi Damon
commit c8d192428f52f244130b84650ad616df09f2b1e1 upstream. Added devices ids for acces i/o products quad and octal serial cards that make use of existing Pericom PI7C9X7954 and PI7C9X7958 configurations . Signed-off-by: Jimi Damon <jdamon@accesio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24serial: 8250_mid: fix divide error bug if baud rate is 0Andy Shevchenko
commit 47b34d2ef266e2c283b514d65c8963c2ccd42474 upstream. Since the commit c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Reported-by: "Mendez Salinas, Fernando" <fernando.mendez.salinas@intel.com> Fixes: c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20tty/serial: atmel: fix RS485 half duplex with DMAAlexandre Belloni
commit 0058f0871efe7b01c6f2b3046c68196ab73e96da upstream. When using DMA, half duplex doesn't work properly because rx is not stopped before starting tx. Ensure we call atmel_stop_rx() in the DMA case. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20serial: samsung: Fix ERR pointer dereference on deferred probeKrzysztof Kozlowski
commit e51e4d8a185de90424b03f30181b35f29c46a25a upstream. When the clk_get() of "uart" clock returns EPROBE_DEFER, the next re-probe finishes with success but uses invalid (ERR_PTR) values. This leads to dereferencing of ERR_PTR stored under ourport->clk: 12c30000.serial: Controller clock not found (...) 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10 Unable to handle kernel paging request at virtual address fffffdfb (clk_prepare) from [<c039f7d0>] (s3c24xx_serial_pm+0x20/0x128) (s3c24xx_serial_pm) from [<c0395414>] (uart_change_pm+0x38/0x40) (uart_change_pm) from [<c039689c>] (uart_add_one_port+0x31c/0x44c) (uart_add_one_port) from [<c03a035c>] (s3c24xx_serial_probe+0x2a8/0x418) (s3c24xx_serial_probe) from [<c03ee110>] (platform_drv_probe+0x50/0xb0) (platform_drv_probe) from [<c03ecb44>] (driver_probe_device+0x1f4/0x2b0) (driver_probe_device) from [<c03eb0c0>] (bus_for_each_drv+0x44/0x8c) (bus_for_each_drv) from [<c03ec8c8>] (__device_attach+0x9c/0x100) (__device_attach) from [<c03ebf54>] (bus_probe_device+0x84/0x8c) (bus_probe_device) from [<c03ec388>] (deferred_probe_work_func+0x60/0x8c) (deferred_probe_work_func) from [<c012fee4>] (process_one_work+0x120/0x328) (process_one_work) from [<c0130150>] (worker_thread+0x2c/0x4ac) (worker_thread) from [<c0135320>] (kthread+0xd8/0xf4) (kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c) The first unsuccessful clk_get() causes s3c24xx_serial_init_port() to exit with failure but the s3c24xx_uart_port is left half-configured (e.g. port->mapbase is set, clk contains ERR_PTR). On next re-probe, the function s3c24xx_serial_init_port() will exit early with success because of configured port->mapbase and driver will use old values, including the ERR_PTR as clock. Fix this by cleaning the port->mapbase on error path so each re-probe will initialize all of the port settings. Fixes: 60e93575476f ("serial: samsung: enable clock before clearing pending interrupts during init") Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20tty: serial: msm: Don't read off end of tx fifoBjorn Andersson
commit 30acf549ca1e81859a67590ab9ecfce3d1050a0b upstream. For dm uarts in pio mode tx data is transferred to the fifo register 4 bytes at a time, but care is not taken when these 4 bytes spans the end of the xmit buffer so the loop might read up to 3 bytes past the buffer and then skip the actual data at the beginning of the buffer. Fix this by, analogous to the DMA case, make sure the chunk doesn't wrap the xmit buffer. Fixes: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") Cc: Ivan Ivanov <iivanov.xz@gmail.com> Reported-by: Frank Rowand <frowand.list@gmail.com> Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org> Tested-by: Frank Rowand <frank.rowand@am.sony.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2026-05-24 23:25:55 +0000