summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2025-12-29Merge 6.19-rc3 into tty-nextGreg Kroah-Hartman
We need the serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-23serial: xilinx_uartps: fix rs485 delay_rts_after_sendj.turek
RTS line control with delay should be triggered when there is no more bytes in kfifo and hardware buffer is empty. Without this patch RTS control is scheduled right after feeding hardware buffer and this is too early. RTS line may change state before hardware buffer is empty. With this patch delayed RTS state change is triggered when function cdns_uart_handle_tx is called from cdns_uart_isr on CDNS_UART_IXR_TXEMPTY exactly when hardware completed transmission Fixes: fccc9d9233f9 ("tty: serial: uartps: Add rs485 support to uartps driver") Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/20251221103221.1971125-1-jakub.turek@elsta.tech Signed-off-by: Jakub Turek <jakub.turek@elsta.tech> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-23serial: sh-sci: Check that the DMA cookie is validClaudiu Beznea
The driver updates struct sci_port::tx_cookie to zero right before the TX work is scheduled, or to -EINVAL when DMA is disabled. dma_async_is_complete(), called through dma_cookie_status() (and possibly through dmaengine_tx_status()), considers cookies valid only if they have values greater than or equal to 1. Passing zero or -EINVAL to dmaengine_tx_status() before any TX DMA transfer has started leads to an incorrect TX status being reported, as the cookie is invalid for the DMA subsystem. This may cause long wait times when the serial device is opened for configuration before any TX activity has occurred. Check that the TX cookie is valid before passing it to dmaengine_tx_status(). Fixes: 7cc0e0a43a91 ("serial: sh-sci: Check if TX data was written to device in .tx_empty()") Cc: stable <stable@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://patch.msgid.link/20251217135759.402015-1-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-23serial: core: Fix serial device initializationAlexander Stein
During restoring sysfs fwnode information the information of_node_reused was dropped. This was previously set by device_set_of_node_from_dev(). Add it back manually Fixes: 24ec03cc5512 ("serial: core: Restore sysfs fwnode information") Cc: stable <stable@kernel.org> Suggested-by: Cosmin Tanislav <demonsingur@gmail.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Michael Walle <mwalle@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Cosmin Tanislav <demonsingur@gmail.com> Link: https://patch.msgid.link/20251219152813.1893982-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-23serial: rsci: Convert to FIELD_MODIFY()Geert Uytterhoeven
Use the FIELD_MODIFY() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/ada3faf4698155a618ae6371b35eab121eb8b19c.1766411924.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-21vt: Remove con_debug_enter/_leave from struct conswThomas Zimmermann
There are no implementations of con_debug_enter and con_debug_leave. Remove the callbacks from struct consw and clean up the caller. This is a functional revert of commit b45cfba4e900 ("vt,console,kdb: implement atomic console enter/leave functions"). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20251208102851.40894-3-tzimmermann@suse.de
2025-12-21vt: Remove trailing whitespaceThomas Zimmermann
Fix coding style in vt.c Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20251208102851.40894-2-tzimmermann@suse.de
2025-12-17serial: 8250: longson: Fix NULL vs IS_ERR() bug in probeDan Carpenter
The devm_platform_get_and_ioremap_resource() function never returns NULL, it returns error pointers. Fix the error checking to match. Fixes: 25e95d763176 ("serial: 8250: Add Loongson uart driver support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/aSsIa3KdAlXh5uQC@stanley.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: core: Restore sysfs fwnode informationAndy Shevchenko
The change that restores sysfs fwnode information does it only for OF cases. Update the fix to cover all possible types of fwnodes. Fixes: d36f0e9a0002 ("serial: core: restore of_node information in sysfs") Cc: stable <stable@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20251127163650.2942075-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serdev: Provide a bustype shutdown functionUwe Kleine-König
To prepare serdev driver to migrate away from struct device_driver::shutdown (and then eventually remove that callback) create a serdev driver shutdown callback and migration code to keep the existing behaviour. Note this introduces a warning for each driver at register time that isn't converted yet to that callback. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/ab518883e3ed0976a19cb5b5b5faf42bd3a655b7.1765526117.git.u.kleine-koenig@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: sh-sci: Add support for RZ/G3E RSCIBiju Das
Add support for RZ/G3E RSCI. RSCI IP found on the RZ/G3E SoC is similar to RZ/T2H, but it has a 32-stage FIFO. It has 6 clocks(5 module clocks + 1 external clock) instead of 3 clocks(2 module clocks + 1 external clock) on T2H, has 6 irqs compared to 4 on RZ/T2H and has multiple resets. Add support for the hardware flow control. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-18-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: rsci: Rename early_console data, port_params and callback() namesBiju Das
Rename rsci_early_console_setup()->rsci_rzt2h_early_console_setup(), the early_console data of_sci_rsci_data->of_rsci_rzt2h_data and the port_params rsci_port_params->rsci_rzt2h_port_params to support RZ/G3E RSCI that uses different data and callback(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-17-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: sh-sci: Add finish_console_write() callbackBiju Das
Add finish_console_write() callback as RZ/G3E RSCI IP needs special handling compared to other SoCs. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-16-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: sh-sci: Make sci_scbrr_calc() publicBiju Das
Make the function sci_scbrr_calc() public for code reuse to support RZ/G3E RSCI IP. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-15-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: sh-sci: Add support for RZ/G3E RSCI clksBiju Das
RZ/G3E RSCI has 6 clocks (5 module clocks + 1 external clock). Add support for the module clocks. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-14-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: sh-sci: Add RSCI_PORT_SCIF32 port IDBiju Das
The RZ/G3E RSCI IP has 32-stage FIFO compared to 16-stage FIFO on RZ/T2H. Add RSCI_PORT_SCIF32 port ID to differentiate it from RZ/T2H RSCI and update sci_is_rsci_type() and sci_is_fifo_type() Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-13-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: sh-sci: Rename port SCI_PORT_RSCI->RSCI_PORT_SCIF16Biju Das
Rename port SCI_PORT_RSCI->RSCI_PORT_SCIF16 to differentiate it from RZ/G3E port that has 32-stage FIFO. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-12-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: sh-sci: Add sci_is_rsci_type()Biju Das
Add sci_is_rsci_type() for RSCI port type. This will simplify the code when the support added for RSCI_PORT_SCIF32 private PORT type. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-11-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: sh-sci: Use devm_reset_control_array_get_exclusive()Biju Das
Replace devm_*_get_exclusive()->devm_*_array_get_exclusive() to support existing SoCs along with RZ/G3E as RZ/G3E has 2 resets. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-10-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: rsci: Drop unused TDR registerBiju Das
Drop the unused TDR register-related macros. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-9-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: rsci: Drop unused macro DCRBiju Das
Drop unused macro DCR and its bit definition. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-8-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: sh-sci: Drop extra linesBiju Das
Shorten the number lines in sci_init_clocks() by fitting the error messages within an 100-character length limit. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-7-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: rsci: Drop rsci_clear_SCxSR()Biju Das
Drop rsci_clear_SCxSR by reusing rsci_clear_CFC() as the contents of both functions are the same. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-6-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: sh-sci: Drop checking port type for device file{create, remove}Biju Das
Ports that support FIFO has fifosize > 1. Replace checking the port type with fifosize for device file{create, remove}. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-5-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: rsci: Add set_rtrg() callbackBiju Das
The rtrg variable is populated in sci_init_single() for RZ/T2H. Add set_rtrg() callback for setting the rtrg value. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-4-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: sh-sci: Update rx_trigger size for RZ/T2H RSCIBiju Das
The RZ/T2H RSCI has 16-stage FIFO. Like other SoCs, set the default rx_trigger as the fifosize. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20251129164325.209213-3-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17tty/n_hdlc: Fix struct n_hdlc kernel-doc warningsBartlomiej Kubik
Add missing descriptions for write_work and tty_for_write_work members in struct n_hdlc. This fixes the following warnings: drivers/tty/n_hdlc.c: warning: Function parameter or member 'write_work' not described in 'n_hdlc' drivers/tty/n_hdlc.c: warning: Function parameter or member 'tty_for_write_work' not described in 'n_hdlc' Signed-off-by: Bartlomiej Kubik <kubik.bartlomiej@gmail.com> Link: https://patch.msgid.link/20251202063748.1210359-1-kubik.bartlomiej@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: 8250_keba: Use dev_err_probe()Gerhard Engleder
Simplify the probe() code by using dev_err_probe(). Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Gerhard Engleder <eg@keba.com> Link: https://patch.msgid.link/20251216193726.55449-4-gerhard@engleder-embedded.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: 8250_keba: Add ICR definesGerhard Engleder
Add defines for better readability of the Indexed Control Register (ICR) access. In enhanced mode SCR and LSR registers are used for ICR access. The behavior of these register is different in this mode and that shall be documented with dedicated defines. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Gerhard Engleder <eg@keba.com> Link: https://patch.msgid.link/20251216193726.55449-3-gerhard@engleder-embedded.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: 8250_keba: Add missing includesGerhard Engleder
Andy and Ilpo suggested to add missing includes, because the code shall not rely on indirect includes. Add missing includes and remove one include, which only enabled indirect includes. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Gerhard Engleder <eg@keba.com> Link: https://patch.msgid.link/20251216193726.55449-2-gerhard@engleder-embedded.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: 8250_men_mcb: Clean definesFilip Jensen
The Z125 define is not used anywhere, thus removed. Also used a more specific name for the maximum number of ports per unit and removed the duplicated define MAX_PORTS Reviewed-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com> Signed-off-by: Filip Jensen <dev-Felipe.Jensen@duagon.com> Link: https://patch.msgid.link/20251210164804.94801-2-dev-Felipe.Jensen@duagon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17tty: vt/keyboard: Split apart vt_do_diacrit()Nathan Chancellor
After commit bfb24564b5fd ("tty: vt/keyboard: use __free()"), builds using asm goto for put_user() and get_user() with a version of clang older than 17 error with: drivers/tty/vt/keyboard.c:1709:7: error: cannot jump from this asm goto statement to one of its possible targets if (put_user(asize, &a->kb_cnt)) ^ ... arch/arm64/include/asm/uaccess.h:298:2: note: expanded from macro '__put_mem_asm' asm goto( \ ^ drivers/tty/vt/keyboard.c:1687:7: note: possible target of asm goto statement if (put_user(asize, &a->kb_cnt)) ^ ... arch/arm64/include/asm/uaccess.h:342:2: note: expanded from macro '__raw_put_user' __rpu_failed: \ ^ drivers/tty/vt/keyboard.c:1697:23: note: jump exits scope of variable with __attribute__((cleanup)) void __free(kfree) *buf = kmalloc_array(MAX_DIACR, sizeof(struct kbdiacruc), ^ drivers/tty/vt/keyboard.c:1671:33: note: jump bypasses initialization of variable with __attribute__((cleanup)) struct kbdiacr __free(kfree) *dia = kmalloc_array(MAX_DIACR, sizeof(struct kbdiacr), ^ Prior to a fix to clang's scope checker in clang 17 [1], all labels in a function were validated as potential targets of all asm gotos in a function, regardless of whether they actually were a target of an asm goto call, resulting in false positive errors about skipping over variables marked with the cleanup attribute. To workaround this error, split up the bodies of the case statements in vt_do_diacrit() into their own functions so that the scope checker does not trip up on the multiple instances of __free(). Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202509091702.Oc7eCRDw-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202511241835.EA8lShgH-lkp@intel.com/ Link: https://github.com/llvm/llvm-project/commit/f023f5cdb2e6c19026f04a15b5a935c041835d14 [1] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://patch.msgid.link/20251125-tty-vt-keyboard-wa-clang-scope-check-error-v1-1-f5a5ea55c578@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: 8250_dw: fix runtime PM initialization sequenceArtem Shimko
Move pm_runtime_set_active() call earlier in probe to simplify error handling and add proper error checking to ensure the device is marked as active before any runtime PM operations can occur. Additionally, replace the const struct dev_pm_ops declaration with _DEFINE_DEV_PM_OPS macro for better consistency with modern kernel PM patterns. Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com> Link: https://patch.msgid.link/20251104145433.2316165-3-a.shimko.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17serial: 8250_dw: handle clock enable errors in runtime_resumeArtem Shimko
Add error checking for clk_prepare_enable() calls in dw8250_runtime_resume(). Currently if either clock fails to enable, the function returns success while leaving clocks in inconsistent state. This change implements comprehensive error handling by checking the return values of both clk_prepare_enable() calls. If the second clock enable operation fails after the first clock has already been successfully enabled, the code now properly cleans up by disabling and unpreparing the first clock before returning. The error code is then propagated to the caller, ensuring that clock enable failures are properly reported rather than being silently ignored. Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com> Link: https://patch.msgid.link/20251104145433.2316165-2-a.shimko.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-06Merge tag 'tty-6.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.19-rc1. Nothing major at all, just small constant churn to make the tty layer "cleaner" as well as serial driver updates and even a new test added! Included in here are: - More tty/serial cleanups from Jiri - tty tiocsti test added to hopefully ensure we don't regress in this area again - sc16is7xx driver updates - imx serial driver updates - 8250 driver updates - new hardware device ids added - other minor serial/tty driver cleanups and tweaks All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits) serial: sh-sci: Fix deadlock during RSCI FIFO overrun error dt-bindings: serial: rsci: Drop "uart-has-rtscts: false" LoongArch: dts: Add uart new compatible string serial: 8250: Add Loongson uart driver support dt-bindings: serial: 8250: Add Loongson uart compatible serial: 8250: add driver for KEBA UART serial: Keep rs485 settings for devices without firmware node serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms serial: qcom-geni: Enable PM runtime for serial driver serial: sprd: Return -EPROBE_DEFER when uart clock is not ready tty: serial: samsung: Declare earlycon for Exynos850 serial: icom: Convert PCIBIOS_* return codes to errnos serial: 8250-of: Fix style issues in 8250_of.c serial: add support of CPCI cards serial: mux: Fix kernel doc for mux_poll() tty: replace use of system_unbound_wq with system_dfl_wq serial: 8250_platform: simplify IRQF_SHARED handling serial: 8250: make share_irqs local to 8250_platform serial: 8250: move skip_txen_test to core serial: drop SERIAL_8250_DEPRECATED_OPTIONS ...
2025-12-04Merge tag 'pci-v6.19-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan Williams) - Switch vmd from custom domain number allocator to the common allocator to prevent a potential race with new non-VMD buses (Dan Williams) - Enable Precision Time Measurement (PTM) only if device advertises support for a relevant role, to prevent invalid PTM Requests that cause ACS violations that are reported as AER Uncorrectable Non-Fatal errors (Mika Westerberg) Resource management: - Prevent resource tree corruption when BAR resize fails (Ilpo Järvinen) - Restore BARs to the original size if a BAR resize fails (Ilpo Järvinen) - Remove BAR release from BAR resize attempts by the xe, i915, and amdgpu drivers so the PCI core can restore BARs if the resize fails (Ilpo Järvinen) - Move Resizable BAR code to rebar.c (Ilpo Järvinen) - Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo Järvinen) - Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo Järvinen) Power management and error handling: - For drivers using PCI legacy suspend, save config state at suspend so that state (not any earlier state from enumeration, probe, or error recovery) will be restored when resuming (Lukas Wunner) - For devices with no driver or a driver that lacks power management, save config state at hibernate so that state (not any earlier state from enumeration, probe, or error recovery) will be restored when resuming (Lukas Wunner) - Save device config space on device addition, before driver binding, so error recovery works more reliably (Lukas Wunner) - Drop pci_save_state() from several drivers that no longer need it since the PCI core always does it and pci_restore_state() no longer invalidates the saved state (Lukas Wunner) - Document use of pci_save_state() by drivers to capture the state they want restored during error recovery (Lukas Wunner) Power control: - Add a struct pci_ops.assert_perst() function pointer to assert/deassert PCIe PERST# and implement it for the qcom driver (Krishna Chaitanya Chundru) - Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe switch, which must be held in reset after poweron so the pwrctrl driver can configure the switch via I2C before bringing up the links (Krishna Chaitanya Chundru) Endpoint framework: - Convert the endpoint doorbell test to use a threaded IRQ to fix a 'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri) - Add endpoint VNTB MSI doorbell support to reduce latency between host and endpoint (Frank Li) New native PCIe controller drivers: - Add CIX Sky1 host controller DT binding and driver (Hans Zhang) - Add NXP S32G host controller DT binding and driver (Vincent Guittot) - Add Renesas RZ/G3S host controller DT binding and driver (Claudiu Beznea) - Add SpacemiT K1 host controller DT binding and driver (Alex Elder) Amlogic Meson PCIe controller driver: - Update DT binding to name DBI region 'dbi', not 'elbi', and update driver to support both (Manivannan Sadhasivam) Apple PCIe controller driver: - Move struct pci_host_bridge allocation from pci_host_common_init() to callers, which significantly simplifies pcie-apple (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable advertising ASPM L0s support correctly (Jim Quinlan) - Add a panic/die handler to print diagnostic info in case PCIe caused an unrecoverable abort (Jim Quinlan) Cadence PCIe controller driver: - Add module support for Cadence platform host and endpoint controller driver (Manikandan K Pillai) - Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare for new CIX Sky1 driver (Manikandan K Pillai) MediaTek PCIe controller driver: - Convert DT binding to YAML schema (Christian Marangi) - Add Airoha AN7583 DT compatible and driver support (Christian Marangi) Qualcomm PCIe controller driver: - Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu) - Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280, sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT schemas (Krzysztof Kozlowski) - Look up OPP using both frequency and data rate (not just frequency) so RPMh votes can account for both (Krishna Chaitanya Chundru) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK3528 compatible strings in DT binding (Yao Zi) STMicroelectronics STM32MP25 PCIe controller driver: - Fix a race between link training and endpoint register initialization (Christian Bruel) - Align endpoint allocations to match the ATU requirements (Christian Bruel) Synopsys DesignWare PCIe controller driver: - Clear L1 PM Substate Capability 'Supported' bits unless glue driver says it's supported, which prevents users from enabling non-working L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas) - Remove now-superfluous L1SS disable code from tegra194 (Bjorn Helgaas) - Configure L1SS support in dw-rockchip when DT says 'supports-clkreq' (Shawn Lin) TI Keystone PCIe controller driver: - Fail the probe instead of silently succeeding if ks_pcie_of_data didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli) - Make keystone buildable as a loadable module, except on ARM32 where hook_fault_code() is __init (Siddharth Vadapalli)" * tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits) MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer PCI: sky1: Add PCIe host support for CIX Sky1 dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings PCI: cadence: Add support for High Perf Architecture (HPA) controller MAINTAINERS: Add NXP S32G PCIe controller driver maintainer PCI: s32g: Add NXP S32G PCIe controller driver (RC) PCI: dwc: Add register and bitfield definitions dt-bindings: PCI: s32g: Add NXP S32G PCIe controller PCI: Add Renesas RZ/G3S host controller driver PCI: host-generic: Move bridge allocation outside of pci_host_common_init() dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding PCI: Validate pci_rebar_size_supported() input Documentation: PCI: Amend error recovery doc with pci_save_state() rules treewide: Drop pci_save_state() after pci_restore_state() PCI/ERR: Ensure error recoverability at all times PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths PCI: dw-rockchip: Configure L1SS support PCI: tegra194: Remove unnecessary L1SS disable code ...
2025-12-03Merge tag 'printk-for-6.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Allow creaing nbcon console drivers with an unsafe write_atomic() callback that can only be called by the final nbcon_atomic_flush_unsafe(). Otherwise, the driver would rely on the kthread. It is going to be used as the-best-effort approach for an experimental nbcon netconsole driver, see https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org Note that a safe .write_atomic() callback is supposed to work in NMI context. But some networking drivers are not safe even in IRQ context: https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35 In an ideal world, all networking drivers would be fixed first and the atomic flush would be blocked only in NMI context. But it brings the question how reliable networking drivers are when the system is in a bad state. They might block flushing more reliable serial consoles which are more suitable for serious debugging anyway. - Allow to use the last 4 bytes of the printk ring buffer. - Prevent queuing IRQ work and block printk kthreads when consoles are suspended. Otherwise, they create non-necessary churn or even block the suspend. - Release console_lock() between each record in the kthread used for legacy consoles on RT. It might significantly speed up the boot. - Release nbcon context between each record in the atomic flush. It prevents stalls of the related printk kthread after it has lost the ownership in the middle of a record - Add support for NBCON consoles into KDB - Add %ptsP modifier for printing struct timespec64 and use it where possible - Misc code clean up * tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits) printk: Use console_is_usable on console_unblank arch: um: kmsg_dump: Use console_is_usable drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT lib/vsprintf: Unify FORMAT_STATE_NUM handlers printk: Avoid irq_work for printk_deferred() on suspend printk: Avoid scheduling irq_work on suspend printk: Allow printk_trigger_flush() to flush all types tracing: Switch to use %ptSp scsi: snic: Switch to use %ptSp scsi: fnic: Switch to use %ptSp s390/dasd: Switch to use %ptSp ptp: ocp: Switch to use %ptSp pps: Switch to use %ptSp PCI: epf-test: Switch to use %ptSp net: dsa: sja1105: Switch to use %ptSp mmc: mmc_test: Switch to use %ptSp media: av7110: Switch to use %ptSp ipmi: Switch to use %ptSp igb: Switch to use %ptSp e1000e: Switch to use %ptSp ...
2025-12-01Merge tag 'objtool-core-2025-12-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: - klp-build livepatch module generation (Josh Poimboeuf) Introduce new objtool features and a klp-build script to generate livepatch modules using a source .patch as input. This builds on concepts from the longstanding out-of-tree kpatch project which began in 2012 and has been used for many years to generate livepatch modules for production kernels. However, this is a complete rewrite which incorporates hard-earned lessons from 12+ years of maintaining kpatch. Key improvements compared to kpatch-build: - Integrated with objtool: Leverages objtool's existing control-flow graph analysis to help detect changed functions. - Works on vmlinux.o: Supports late-linked objects, making it compatible with LTO, IBT, and similar. - Simplified code base: ~3k fewer lines of code. - Upstream: No more out-of-tree #ifdef hacks, far less cruft. - Cleaner internals: Vastly simplified logic for symbol/section/reloc inclusion and special section extraction. - Robust __LINE__ macro handling: Avoids false positive binary diffs caused by the __LINE__ macro by introducing a fix-patch-lines script which injects #line directives into the source .patch to preserve the original line numbers at compile time. - Disassemble code with libopcodes instead of running objdump (Alexandre Chartre) - Disassemble support (-d option to objtool) by Alexandre Chartre, which supports the decoding of various Linux kernel code generation specials such as alternatives: 17ef: sched_balance_find_dst_group+0x62f mov 0x34(%r9),%edx 17f3: sched_balance_find_dst_group+0x633 | <alternative.17f3> | X86_FEATURE_POPCNT 17f3: sched_balance_find_dst_group+0x633 | call 0x17f8 <__sw_hweight64> | popcnt %rdi,%rax 17f8: sched_balance_find_dst_group+0x638 cmp %eax,%edx ... jump table alternatives: 1895: sched_use_asym_prio+0x5 test $0x8,%ch 1898: sched_use_asym_prio+0x8 je 0x18a9 <sched_use_asym_prio+0x19> 189a: sched_use_asym_prio+0xa | <jump_table.189a> | JUMP 189a: sched_use_asym_prio+0xa | jmp 0x18ae <sched_use_asym_prio+0x1e> | nop2 189c: sched_use_asym_prio+0xc mov $0x1,%eax 18a1: sched_use_asym_prio+0x11 and $0x80,%ecx ... exception table alternatives: native_read_msr: 5b80: native_read_msr+0x0 mov %edi,%ecx 5b82: native_read_msr+0x2 | <ex_table.5b82> | EXCEPTION 5b82: native_read_msr+0x2 | rdmsr | resume at 0x5b84 <native_read_msr+0x4> 5b84: native_read_msr+0x4 shl $0x20,%rdx .... x86 feature flag decoding (also see the X86_FEATURE_POPCNT example in sched_balance_find_dst_group() above): 2faaf: start_thread_common.constprop.0+0x1f jne 0x2fba4 <start_thread_common.constprop.0+0x114> 2fab5: start_thread_common.constprop.0+0x25 | <alternative.2fab5> | X86_FEATURE_ALWAYS | X86_BUG_NULL_SEG 2fab5: start_thread_common.constprop.0+0x25 | jmp 0x2faba <.altinstr_aux+0x2f4> | jmp 0x4b0 <start_thread_common.constprop.0+0x3f> | nop5 2faba: start_thread_common.constprop.0+0x2a mov $0x2b,%eax ... NOP sequence shortening: 1048e2: snapshot_write_finalize+0xc2 je 0x104917 <snapshot_write_finalize+0xf7> 1048e4: snapshot_write_finalize+0xc4 nop6 1048ea: snapshot_write_finalize+0xca nop11 1048f5: snapshot_write_finalize+0xd5 nop11 104900: snapshot_write_finalize+0xe0 mov %rax,%rcx 104903: snapshot_write_finalize+0xe3 mov 0x10(%rdx),%rax ... and much more. - Function validation tracing support (Alexandre Chartre) - Various -ffunction-sections fixes (Josh Poimboeuf) - Clang AutoFDO (Automated Feedback-Directed Optimizations) support (Josh Poimboeuf) - Misc fixes and cleanups (Borislav Petkov, Chen Ni, Dylan Hatch, Ingo Molnar, John Wang, Josh Poimboeuf, Pankaj Raghav, Peter Zijlstra, Thorsten Blum) * tag 'objtool-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) objtool: Fix segfault on unknown alternatives objtool: Build with disassembly can fail when including bdf.h objtool: Trim trailing NOPs in alternative objtool: Add wide output for disassembly objtool: Compact output for alternatives with one instruction objtool: Improve naming of group alternatives objtool: Add Function to get the name of a CPU feature objtool: Provide access to feature and flags of group alternatives objtool: Fix address references in alternatives objtool: Disassemble jump table alternatives objtool: Disassemble exception table alternatives objtool: Print addresses with alternative instructions objtool: Disassemble group alternatives objtool: Print headers for alternatives objtool: Preserve alternatives order objtool: Add the --disas=<function-pattern> action objtool: Do not validate IBT for .return_sites and .call_sites objtool: Improve tracing of alternative instructions objtool: Add functions to better name alternatives objtool: Identify the different types of alternatives ...
2025-12-01Merge tag 'vfs-6.19-rc1.fd_prepare.fs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull fd prepare updates from Christian Brauner: "This adds the FD_ADD() and FD_PREPARE() primitive. They simplify the common pattern of get_unused_fd_flags() + create file + fd_install() that is used extensively throughout the kernel and currently requires cumbersome cleanup paths. FD_ADD() - For simple cases where a file is installed immediately: fd = FD_ADD(O_CLOEXEC, vfio_device_open_file(device)); if (fd < 0) vfio_device_put_registration(device); return fd; FD_PREPARE() - For cases requiring access to the fd or file, or additional work before publishing: FD_PREPARE(fdf, O_CLOEXEC, sync_file->file); if (fdf.err) { fput(sync_file->file); return fdf.err; } data.fence = fd_prepare_fd(fdf); if (copy_to_user((void __user *)arg, &data, sizeof(data))) return -EFAULT; return fd_publish(fdf); The primitives are centered around struct fd_prepare. FD_PREPARE() encapsulates all allocation and cleanup logic and must be followed by a call to fd_publish() which associates the fd with the file and installs it into the caller's fdtable. If fd_publish() isn't called, both are deallocated automatically. FD_ADD() is a shorthand that does fd_publish() immediately and never exposes the struct to the caller. I've implemented this in a way that it's compatible with the cleanup infrastructure while also being usable separately. IOW, it's centered around struct fd_prepare which is aliased to class_fd_prepare_t and so we can make use of all the basica guard infrastructure" * tag 'vfs-6.19-rc1.fd_prepare.fs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits) io_uring: convert io_create_mock_file() to FD_PREPARE() file: convert replace_fd() to FD_PREPARE() vfio: convert vfio_group_ioctl_get_device_fd() to FD_ADD() tty: convert ptm_open_peer() to FD_ADD() ntsync: convert ntsync_obj_get_fd() to FD_PREPARE() media: convert media_request_alloc() to FD_PREPARE() hv: convert mshv_ioctl_create_partition() to FD_ADD() gpio: convert linehandle_create() to FD_PREPARE() pseries: port papr_rtas_setup_file_interface() to FD_ADD() pseries: convert papr_platform_dump_create_handle() to FD_ADD() spufs: convert spufs_gang_open() to FD_PREPARE() papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE() spufs: convert spufs_context_open() to FD_PREPARE() net/socket: convert __sys_accept4_file() to FD_ADD() net/socket: convert sock_map_fd() to FD_ADD() net/kcm: convert kcm_ioctl() to FD_PREPARE() net/handshake: convert handshake_nl_accept_doit() to FD_PREPARE() secretmem: convert memfd_secret() to FD_ADD() memfd: convert memfd_create() to FD_ADD() bpf: convert bpf_token_create() to FD_PREPARE() ...
2025-11-28tty: convert ptm_open_peer() to FD_ADD()Christian Brauner
Christian Brauner <brauner@kernel.org> says: The fix sent in [1] was squashed into this commit. Fixes: https://lore.kernel.org/37ac7af5-584f-4768-a462-4d1071c43eaf@sirena.org.uk [1] Reported-by: Mark Brown <broonie@kernel.org> [1] Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> [1] Link: https://patch.msgid.link/20251123-work-fd-prepare-v4-42-b6efa1706cfd@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-11-27drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOTMarcos Paulo de Souza
The original code tried to find a console that has CON_BOOT _or_ CON_ENABLED flag set. The flag CON_ENABLED is set to all registered consoles, so in this case this check is always true, even for the CON_BOOT consoles. The initial intent of the kgdboc_earlycon_init was to get a console early (CON_BOOT) or later on in the process (CON_ENABLED). The code was using for_each_console macro, meaning that all console structs were previously registered on the printk() machinery. At this point, any console found on for_each_console is safe for kgdboc_earlycon_init to use. Dropping the check makes the code cleaner, and avoids further confusion by future readers of the code. Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Link: https://patch.msgid.link/20251121-printk-cleanup-part2-v2-1-57b8b78647f4@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com>
2025-11-26serial: 8250: Fix 8250_rsa symbol loopIlpo Järvinen
Depmod fails for a kernel made with: make allnoconfig echo -e "CONFIG_MODULES=y\nCONFIG_SERIAL_8250=m\nCONFIG_SERIAL_8250_EXTENDED=y\nCONFIG_SERIAL_8250_RSA=y" >> .config make olddefconfig ...due to a dependency loop: depmod: ERROR: Cycle detected: 8250 -> 8250_base -> 8250 depmod: ERROR: Found 2 modules in dependency cycles! This is caused by the move of 8250 RSA code from 8250_port.c (in 8250_base.ko) into 8250_rsa.c (in 8250.ko) by the commit 5a128fb475fb ("serial: 8250: move RSA functions to 8250_rsa.c"). The commit b20d6576cdb3 ("serial: 8250: export RSA functions") tried to fix a missing symbol issue with EXPORTs but those then cause this dependency cycle. Break dependency loop by moving 8250_rsa.o from 8250.ko to 8250_base.ko and by passing univ8250_port_base_ops to univ8250_rsa_support() that can make a local copy of it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Alex Davis <alex47794@gmail.com> Fixes: 5a128fb475fb ("serial: 8250: move RSA functions to 8250_rsa.c") Fixes: b20d6576cdb3 ("serial: 8250: export RSA functions") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/all/87frc3sd8d.fsf@posteo.net/ Link: https://lore.kernel.org/all/CADiockCvM6v+d+UoFZpJSMoLAdpy99_h-hJdzUsdfaWGn3W7-g@mail.gmail.com/ Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20251110105043.4062-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-26serial: sh-sci: Fix deadlock during RSCI FIFO overrun errorBiju Das
On RSCI IP, a deadlock occurs during a FIFO overrun error, as it uses a different register to clear the FIFO overrun error status. Cc: stable@kernel.org Fixes: 0666e3fe95ab ("serial: sh-sci: Add support for RZ/T2H SCI") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251114101350.106699-3-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-26serial: 8250: Add Loongson uart driver supportBinbin Zhou
Add the driver for on-chip UART used on Loongson family chips. The hardware is similar to NS16550A, but there are the following differences: - Some chips (such as Loongson-2K2000) have added a fractional division register to obtain the required baud rate accurately, so the {get,set}_divisor callback is overridden. - Due to hardware defects, quirk handling is required for UART_MCR/UART_MSR. Co-developed-by: Haowei Zheng <zhenghaowei@loongson.cn> Signed-off-by: Haowei Zheng <zhenghaowei@loongson.cn> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://patch.msgid.link/2c2a01a276b9250efea0c7aa190efecdfd6fdf5a.1760166651.git.zhoubinbin@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-26serial: 8250: add driver for KEBA UARTGerhard Engleder
The KEBA UART is found in the system FPGA of KEBA PLC devices. It is mostly 8250 compatible with extension for some UART modes. 3 different variants exist. The simpliest variant supports only RS-232 and is used for debug interfaces. The next variant supports only RS-485 and is used mostly for communication with KEBA panel devices. The third variant is able to support RS-232, RS-485 and RS-422. For this variant not only the mode of the UART is configured, also the physics and transceivers are switched according to the mode. Signed-off-by: Gerhard Engleder <eg@keba.com> Tested-by: Daniel Gierlinger <gida@keba.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Link: https://patch.msgid.link/20251023151229.11774-3-gerhard@engleder-embedded.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-26serial: Keep rs485 settings for devices without firmware nodeGerhard Engleder
Commit fe7f0fa43cef ("serial: 8250: Support rs485 devicetree properties") retrieves rs485 properties for 8250 drivers. These properties are read from the firmware node of the device within uart_get_rs485_mode(). If the firmware node does not exist, then the rs485 flags are still reset. Thus, 8250 driver cannot set rs485 flags to enable a defined rs485 mode during driver loading. This is no problem so far, as no 8250 driver sets the rs485 flags. The default rs485 mode can also be set by firmware nodes. But for some devices a firmware node does not exist. E.g., for a PCIe based serial interface on x86 no device tree is available and the ACPI information of the BIOS often cannot by modified. In this case it shall be possible, that a driver works out of the box by setting a reasonable default rs485 mode. If no firmware node exists, then it should be possible for the driver to set a reasonable default rs485 mode. Therefore, reset rs485 flags only if a firmware node exists. Signed-off-by: Gerhard Engleder <eg@keba.com> Cc: Lukas Wunner <lukas@wunner.de> Reviewed-by: Lukas Wunner <lukas@wunner.de> Link: https://patch.msgid.link/20251023151229.11774-2-gerhard@engleder-embedded.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-26serial: qcom-geni: Enable Serial on SA8255p Qualcomm platformsPraveen Talari
The Qualcomm automotive SA8255p SoC relies on firmware to configure platform resources, including clocks, interconnects and TLMM. The driver requests resources operations over SCMI using power and performance protocols. The SCMI power protocol enables or disables resources like clocks, interconnect paths, and TLMM (GPIOs) using runtime PM framework APIs, such as resume/suspend, to control power states(on/off). The SCMI performance protocol manages UART baud rates, with each baud rate represented by a performance level. The driver uses the dev_pm_opp_set_level() API to request the desired baud rate by specifying the performance level. Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com> Link: https://patch.msgid.link/20251110101043.2108414-5-praveen.talari@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-26serial: qcom-geni: Enable PM runtime for serial driverPraveen Talari
The GENI serial driver currently handles power resource management through calls to the statically defined geni_serial_resources_on() and geni_serial_resources_off() functions. This approach reduces modularity and limits support for platforms with diverse power management mechanisms, including resource managed by firmware. Improve modularity and enable better integration with platform-specific power management, introduce support for runtime PM. Use pm_runtime_resume_and_get() and pm_runtime_put_sync() within the qcom_geni_serial_pm() callback to control resource power state transitions based on UART power state changes. Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com> Link: https://patch.msgid.link/20251110101043.2108414-4-praveen.talari@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-26serial: sprd: Return -EPROBE_DEFER when uart clock is not readyWenhua Lin
In sprd_clk_init(), when devm_clk_get() returns -EPROBE_DEFER for either uart or source clock, we should propagate the error instead of just warning and continuing with NULL clocks. Currently the driver only emits a warning when clock acquisition fails and proceeds with NULL clock pointers. This can lead to issues later when the clocks are actually needed. More importantly, when the clock provider is not ready yet and returns -EPROBE_DEFER, we should return this error to allow deferred probing. This change adds explicit checks for -EPROBE_DEFER after both: 1. devm_clk_get(uport->dev, uart) 2. devm_clk_get(uport->dev, source) When -EPROBE_DEFER is encountered, the function now returns -EPROBE_DEFER to let the driver framework retry probing later when the clock dependencies are resolved. Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com> Link: https://patch.msgid.link/20251022030840.956589-1-Wenhua.Lin@unisoc.com Reviewed-by: Cixi Geng <cixi.geng@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-26tty: serial: samsung: Declare earlycon for Exynos850Sam Protsenko
It makes it possible to use just "earlycon" param in kernel cmdline on Exynos850 based boards instead of "earlycon=exynos4210,0x13820000", as described in [1]: When used with no options, the early console is determined by stdout-path property in device tree's chosen node [1] Documentation/admin-guide/kernel-parameters.txt Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://patch.msgid.link/20251118024822.28148-1-semen.protsenko@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2026-04-14 12:10:53 +0000