summaryrefslogtreecommitdiff
path: root/drivers/usb/core
AgeCommit message (Collapse)Author
2017-04-18usb: hub: Wait for connection to be reestablished after port resetGuenter Roeck
commit 22547c4cc4fe20698a6a85a55b8788859134b8e4 upstream. On a system with a defective USB device connected to an USB hub, an endless sequence of port connect events was observed. The sequence of events as observed is as follows: - Port reports connected event (port status=USB_PORT_STAT_CONNECTION). - Event handler debounces port and resets it by calling hub_port_reset(). - hub_port_reset() calls hub_port_wait_reset() to wait for the reset to complete. - The reset completes, but USB_PORT_STAT_CONNECTION is not immediately set in the port status register. - hub_port_wait_reset() returns -ENOTCONN. - Port initialization sequence is aborted. - A few milliseconds later, the port again reports a connected event, and the sequence repeats. This continues either forever or, randomly, stops if the connection is already re-established when the port status is read. It results in a high rate of udev events. This in turn destabilizes userspace since the above sequence holds the device mutex pretty much continuously and prevents userspace from actually reading the device status. To prevent the problem from happening, let's wait for the connection to be re-established after a port reset. If the device was actually disconnected, the code will still return an error, but it will do so only after the long reset timeout. Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08USB: fix linked-list corruption in rh_call_control()Alan Stern
commit 1633682053a7ee8058e10c76722b9b28e97fb73f upstream. Using KASAN, Dmitry found a bug in the rh_call_control() routine: If buffer allocation fails, the routine returns immediately without unlinking its URB from the control endpoint, eventually leading to linked-list corruption. This patch fixes the problem by jumping to the end of the routine (where the URB is unlinked) when an allocation failure occurs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30usb: hub: Fix crash after failure to read BOS descriptorGuenter Roeck
commit 7b2db29fbb4e766fcd02207eb2e2087170bd6ebc upstream. If usb_get_bos_descriptor() returns an error, usb->bos will be NULL. Nevertheless, it is dereferenced unconditionally in hub_set_initial_usb2_lpm_policy() if usb2_hw_lpm_capable is set. This results in a crash. usb 5-1: unable to get BOS descriptor ... Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = ffffffc00165f000 [00000008] *pgd=000000000174f003, *pud=000000000174f003, *pmd=0000000001750003, *pte=00e8000001751713 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac [ ... ] CPU: 5 PID: 3353 Comm: kworker/5:3 Tainted: G B 4.4.52 #480 Hardware name: Google Kevin (DT) Workqueue: events driver_set_config_work task: ffffffc0c3690000 ti: ffffffc0ae9a8000 task.ti: ffffffc0ae9a8000 PC is at hub_port_init+0xc3c/0xd10 LR is at hub_port_init+0xc3c/0xd10 ... Call trace: [<ffffffc0007fbbfc>] hub_port_init+0xc3c/0xd10 [<ffffffc0007fbe2c>] usb_reset_and_verify_device+0x15c/0x82c [<ffffffc0007fc5e0>] usb_reset_device+0xe4/0x298 [<ffffffbffc0e3fcc>] rtl8152_probe+0x84/0x9b0 [r8152] [<ffffffc00080ca8c>] usb_probe_interface+0x244/0x2f8 [<ffffffc000774a24>] driver_probe_device+0x180/0x3b4 [<ffffffc000774e48>] __device_attach_driver+0xb4/0xe0 [<ffffffc000772168>] bus_for_each_drv+0xb4/0xe4 [<ffffffc0007747ec>] __device_attach+0xd0/0x158 [<ffffffc000775080>] device_initial_probe+0x24/0x30 [<ffffffc0007739d4>] bus_probe_device+0x50/0xe4 [<ffffffc000770bd0>] device_add+0x414/0x738 [<ffffffc000809fe8>] usb_set_configuration+0x89c/0x914 [<ffffffc00080a120>] driver_set_config_work+0xc0/0xf0 [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 Since we don't know anything about LPM capabilities without BOS descriptor, don't attempt to enable LPM if it is not available. Fixes: 890dae886721 ("xhci: Enable LPM support only for hardwired ...") Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirkSamuel Thibault
commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 upstream. Some USB 2.0 devices erroneously report millisecond values in bInterval. The generic config code manages to catch most of them, but in some cases it's not completely enough. The case at stake here is a USB 2.0 braille device, which wants to announce 10ms and thus sets bInterval to 10, but with the USB 2.0 computation that yields to 64ms. It happens that one can type fast enough to reach this interval and get the device buffers overflown, leading to problematic latencies. The generic config code does not catch this case because the 64ms is considered a sane enough value. This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk to mark devices which actually report milliseconds in bInterval, and marks Vario Ultra devices as needing it. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-26USB: don't free bandwidth_mutex too earlyAlan Stern
commit ab2a4bf83902c170d29ba130a8abb5f9d90559e1 upstream. The USB core contains a bug that can show up when a USB-3 host controller is removed. If the primary (USB-2) hcd structure is released before the shared (USB-3) hcd, the core will try to do a double-free of the common bandwidth_mutex. The problem was described in graphical form by Chung-Geol Kim, who first reported it: ================================================= At *remove USB(3.0) Storage sequence <1> --> <5> ((Problem Case)) ================================================= VOLD ------------------------------------|------------ (uevent) ________|_________ |<1> | |dwc3_otg_sm_work | |usb_put_hcd | |peer_hcd(kref=2)| |__________________| ________|_________ |<2> | |New USB BUS #2 | | | |peer_hcd(kref=1) | | | --(Link)-bandXX_mutex| | |__________________| | ___________________ | |<3> | | |dwc3_otg_sm_work | | |usb_put_hcd | | |primary_hcd(kref=1)| | |___________________| | _________|_________ | |<4> | | |New USB BUS #1 | | |hcd_release | | |primary_hcd(kref=0)| | | | | |bandXX_mutex(free) |<- |___________________| (( VOLD )) ______|___________ |<5> | | SCSI | |usb_put_hcd | |peer_hcd(kref=0) | |*hcd_release | |bandXX_mutex(free*)|<- double free |__________________| ================================================= This happens because hcd_release() frees the bandwidth_mutex whenever it sees a primary hcd being released (which is not a very good idea in any case), but in the course of releasing the primary hcd, it changes the pointers in the shared hcd in such a way that the shared hcd will appear to be primary when it gets released. This patch fixes the problem by changing hcd_release() so that it deallocates the bandwidth_mutex only when the _last_ hcd structure referencing it is released. The patch also removes an unnecessary test, so that when an hcd is released, both the shared_hcd and primary_hcd pointers in the hcd's peer will be cleared. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Chung-Geol Kim <chunggeol.kim@samsung.com> Tested-by: Chung-Geol Kim <chunggeol.kim@samsung.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-26usb: core: hub: hub_port_init lock controller instead of busChris Bainbridge
commit feb26ac31a2a5cb88d86680d9a94916a6343e9e6 upstream. The XHCI controller presents two USB buses to the system - one for USB2 and one for USB3. The hub init code (hub_port_init) is reentrant but only locks one bus per thread, leading to a race condition failure when two threads attempt to simultaneously initialise a USB2 and USB3 device: [ 8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command [ 13.183701] usb 3-3: device descriptor read/all, error -110 On a test system this failure occurred on 6% of all boots. The call traces at the point of failure are: Call Trace: [<ffffffff81b9bab7>] schedule+0x37/0x90 [<ffffffff817da7cd>] usb_kill_urb+0x8d/0xd0 [<ffffffff8111e5e0>] ? wake_up_atomic_t+0x30/0x30 [<ffffffff817dafbe>] usb_start_wait_urb+0xbe/0x150 [<ffffffff817db10c>] usb_control_msg+0xbc/0xf0 [<ffffffff817d07de>] hub_port_init+0x51e/0xb70 [<ffffffff817d4697>] hub_event+0x817/0x1570 [<ffffffff810f3e6f>] process_one_work+0x1ff/0x620 [<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620 [<ffffffff810f4684>] worker_thread+0x64/0x4b0 [<ffffffff810f4620>] ? rescuer_thread+0x390/0x390 [<ffffffff810fa7f5>] kthread+0x105/0x120 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 [<ffffffff81ba183f>] ret_from_fork+0x3f/0x70 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 Call Trace: [<ffffffff817fd36d>] xhci_setup_device+0x53d/0xa40 [<ffffffff817fd87e>] xhci_address_device+0xe/0x10 [<ffffffff817d047f>] hub_port_init+0x1bf/0xb70 [<ffffffff811247ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff817d4697>] hub_event+0x817/0x1570 [<ffffffff810f3e6f>] process_one_work+0x1ff/0x620 [<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620 [<ffffffff810f4684>] worker_thread+0x64/0x4b0 [<ffffffff810f4620>] ? rescuer_thread+0x390/0x390 [<ffffffff810fa7f5>] kthread+0x105/0x120 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 [<ffffffff81ba183f>] ret_from_fork+0x3f/0x70 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 Which results from the two call chains: hub_port_init usb_get_device_descriptor usb_get_descriptor usb_control_msg usb_internal_control_msg usb_start_wait_urb usb_submit_urb / wait_for_completion_timeout / usb_kill_urb hub_port_init hub_set_address xhci_address_device xhci_setup_device Mathias Nyman explains the current behaviour violates the XHCI spec: hub_port_reset() will end up moving the corresponding xhci device slot to default state. As hub_port_reset() is called several times in hub_port_init() it sounds reasonable that we could end up with two threads having their xhci device slots in default state at the same time, which according to xhci 4.5.3 specs still is a big no no: "Note: Software shall not transition more than one Device Slot to the Default State at a time" So both threads fail at their next task after this. One fails to read the descriptor, and the other fails addressing the device. Fix this in hub_port_init by locking the USB controller (instead of an individual bus) to prevent simultaneous initialisation of both buses. Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Link: https://lkml.org/lkml/2016/2/8/312 Link: https://lkml.org/lkml/2016/2/4/748 Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [sumits: minor merge conflict resolution for linux-4.4.y] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-09USB: Add quirk for WORLDE easykey.25 MIDI keyboardLukáš Lalinský
commit d9b2997e4a0a874e452df7cdd7de5a54502bd0aa upstream. Add a quirk for WORLDE easykey.25 MIDI keyboard (idVendor=0218, idProduct=0401). The device reports that it has config string descriptor at index 3, but when the system selects the configuration and tries to get the description, it returns a -EPROTO error, the communication restarts and this keeps repeating over and over again. Not requesting the string descriptor makes the device work correctly. Relevant info from Wireshark: [...] CONFIGURATION DESCRIPTOR bLength: 9 bDescriptorType: 0x02 (CONFIGURATION) wTotalLength: 101 bNumInterfaces: 2 bConfigurationValue: 1 iConfiguration: 3 Configuration bmAttributes: 0xc0 SELF-POWERED NO REMOTE-WAKEUP 1... .... = Must be 1: Must be 1 for USB 1.1 and higher .1.. .... = Self-Powered: This device is SELF-POWERED ..0. .... = Remote Wakeup: This device does NOT support remote wakeup bMaxPower: 50 (100mA) [...] 45 0.369104 host 2.38.0 USB 64 GET DESCRIPTOR Request STRING [...] URB setup bmRequestType: 0x80 1... .... = Direction: Device-to-host .00. .... = Type: Standard (0x00) ...0 0000 = Recipient: Device (0x00) bRequest: GET DESCRIPTOR (6) Descriptor Index: 0x03 bDescriptorType: 0x03 Language Id: English (United States) (0x0409) wLength: 255 46 0.369255 2.38.0 host USB 64 GET DESCRIPTOR Response STRING[Malformed Packet] [...] Frame 46: 64 bytes on wire (512 bits), 64 bytes captured (512 bits) on interface 0 USB URB [Source: 2.38.0] [Destination: host] URB id: 0xffff88021f62d480 URB type: URB_COMPLETE ('C') URB transfer type: URB_CONTROL (0x02) Endpoint: 0x80, Direction: IN Device: 38 URB bus id: 2 Device setup request: not relevant ('-') Data: present (0) URB sec: 1484896277 URB usec: 455031 URB status: Protocol error (-EPROTO) (-71) URB length [bytes]: 0 Data length [bytes]: 0 [Request in: 45] [Time from request: 0.000151000 seconds] Unused Setup Header Interval: 0 Start frame: 0 Copy of Transfer Flags: 0x00000200 Number of ISO descriptors: 0 [Malformed Packet: USB] [Expert Info (Error/Malformed): Malformed Packet (Exception occurred)] [Malformed Packet (Exception occurred)] [Severity level: Error] [Group: Malformed] Signed-off-by: Lukáš Lalinský <lukas@oxygene.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12usb: hub: Move hub_port_disable() to fix warning if PM is disabledGeert Uytterhoeven
commit 3bc02bce908c7250781376052248f5cd60a4e3d4 upstream. If CONFIG_PM=n: drivers/usb/core/hub.c:107: warning: ‘hub_usb3_port_prepare_disable’ declared inline after being called drivers/usb/core/hub.c:107: warning: previous declaration of ‘hub_usb3_port_prepare_disable’ was here To fix this, move hub_port_disable() after hub_usb3_port_prepare_disable(), and adjust forward declarations. Fixes: 37be66767e3cae4f ("usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12USB: fix problems with duplicate endpoint addressesAlan Stern
commit 0a8fd1346254974c3a852338508e4a4cddbb35f1 upstream. When checking a new device's descriptors, the USB core does not check for duplicate endpoint addresses. This can cause a problem when the sysfs files for those endpoints are created; trying to create multiple files with the same name will provoke a WARNING: WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0 sysfs: cannot create duplicate filename '/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05' Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 865 Comm: kworker/2:1 Not tainted 4.9.0-rc7+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event ffff88006bee64c8 ffffffff81f96b8a ffffffff00000001 1ffff1000d7dcc2c ffffed000d7dcc24 0000000000000001 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 ffffffff850fee20 ffffffff85cff020 dffffc0000000000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff8168c88e>] panic+0x1cb/0x3a9 kernel/panic.c:179 [<ffffffff812b80b4>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff819e70ca>] sysfs_warn_dup+0x8a/0xa0 fs/sysfs/dir.c:30 [<ffffffff819e7308>] sysfs_create_dir_ns+0x178/0x1d0 fs/sysfs/dir.c:59 [< inline >] create_dir lib/kobject.c:71 [<ffffffff81fa1b07>] kobject_add_internal+0x227/0xa60 lib/kobject.c:229 [< inline >] kobject_add_varg lib/kobject.c:366 [<ffffffff81fa2479>] kobject_add+0x139/0x220 lib/kobject.c:411 [<ffffffff82737a63>] device_add+0x353/0x1660 drivers/base/core.c:1088 [<ffffffff82738d8d>] device_register+0x1d/0x20 drivers/base/core.c:1206 [<ffffffff82cb77d3>] usb_create_ep_devs+0x163/0x260 drivers/usb/core/endpoint.c:195 [<ffffffff82c9f27b>] create_intf_ep_devs+0x13b/0x200 drivers/usb/core/message.c:1030 [<ffffffff82ca39d3>] usb_set_configuration+0x1083/0x18d0 drivers/usb/core/message.c:1937 [<ffffffff82cc9e2e>] generic_probe+0x6e/0xe0 drivers/usb/core/generic.c:172 [<ffffffff82caa7fa>] usb_probe_device+0xaa/0xe0 drivers/usb/core/driver.c:263 This patch prevents the problem by checking for duplicate endpoint addresses during enumeration and skipping any duplicates. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06usb: hub: Fix auto-remount of safely removed or ejected USB-3 devicesMathias Nyman
commit 37be66767e3cae4fd16e064d8bb7f9f72bf5c045 upstream. USB-3 does not have any link state that will avoid negotiating a connection with a plugged-in cable but will signal the host when the cable is unplugged. For USB-3 we used to first set the link to Disabled, then to RxDdetect to be able to detect cable connects or disconnects. But in RxDetect the connected device is detected again and eventually enabled. Instead set the link into U3 and disable remote wakeups for the device. This is what Windows does, and what Alan Stern suggested. Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24USB: change bInterval default to 10 msAlan Stern
commit 08c5cd37480f59ea39682f4585d92269be6b1424 upstream. Some full-speed mceusb infrared transceivers contain invalid endpoint descriptors for their interrupt endpoints, with bInterval set to 0. In the past they have worked out okay with the mceusb driver, because the driver sets the bInterval field in the descriptor to 1, overwriting whatever value may have been there before. However, this approach was never sanctioned by the USB core, and in fact it does not work with xHCI controllers, because they use the bInterval value that was present when the configuration was installed. Currently usbcore uses 32 ms as the default interval if the value in the endpoint descriptor is invalid. It turns out that these IR transceivers don't work properly unless the interval is set to 10 ms or below. To work around this mceusb problem, this patch changes the endpoint-descriptor parsing routine, making the default interval value be 10 ms rather than 32 ms. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Wade Berrier <wberrier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07USB: fix typo in wMaxPacketSize validationAlan Stern
commit 6c73358c83ce870c0cf32413e5cadb3b9a39c606 upstream. The maximum value allowed for wMaxPacketSize of a high-speed interrupt endpoint is 1024 bytes, not 1023. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07USB: avoid left shift by -1Alan Stern
commit 53e5f36fbd2453ad69a3369a1db62dc06c30a4aa upstream. UBSAN complains about a left shift by -1 in proc_do_submiturb(). This can occur when an URB is submitted for a bulk or control endpoint on a high-speed device, since the code doesn't bother to check the endpoint type; normally only interrupt or isochronous endpoints have a nonzero bInterval value. Aside from the fact that the operation is illegal, it shouldn't matter because the result isn't used. Still, in theory it could cause a hardware exception or other problem, so we should work around it. This patch avoids doing the left shift unless the shift amount is >= 0. The same piece of code has another problem. When checking the device speed (the exponential encoding for interrupt endpoints is used only by high-speed or faster devices), we need to look for speed >= USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds this check. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Vittorio Zecca <zeccav@gmail.com> Tested-by: Vittorio Zecca <zeccav@gmail.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07USB: validate wMaxPacketValue entries in endpoint descriptorsAlan Stern
commit aed9d65ac3278d4febd8665bd7db59ef53e825fe upstream. Erroneous or malicious endpoint descriptors may have non-zero bits in reserved positions, or out-of-bounds values. This patch helps prevent these from causing problems by bounds-checking the wMaxPacketValue entries in endpoint descriptors and capping the values at the maximum allowed. This issue was first discovered and tests were conducted by Jake Lamberson <jake.lamberson1@gmail.com>, an intern working for Rosie Hall. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: roswest <roswest@cisco.com> Tested-by: roswest <roswest@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07USB: hub: change the locking in hub_activateAlan Stern
commit 07d316a22e119fa301fd7dba7f1e1adfd4f72c05 upstream. The locking in hub_activate() is not adequate to provide full mutual exclusion with hub_quiesce(). The subroutine locks the hub's usb_interface, but the callers of hub_quiesce() (such as hub_pre_reset() and hub_event()) hold the lock to the hub's usb_device. This patch changes hub_activate() to make it acquire the same lock as those other routines. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07USB: hub: fix up early-exit pathway in hub_activateAlan Stern
commit ca5cbc8b02f9b21cc8cd1ab36668763ec34f9ee8 upstream. The early-exit pathway in hub_activate, added by commit e50293ef9775 ("USB: fix invalid memory access in hub_activate()") needs improvement. It duplicates code that is already present at the end of the subroutine, and it neglects to undo the effect of a usb_autopm_get_interface_no_resume() call. This patch fixes both problems by making the early-exit pathway jump directly to the end of the subroutine. It simplifies the code at the end by merging two conditionals that actually test the same condition although they appear different: If type < HUB_INIT3 then type must be either HUB_INIT2 or HUB_INIT, and it can't be HUB_INIT because in that case the subroutine would have exited earlier. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07usb: hub: Fix unbalanced reference count/memory leak/deadlocksViresh Kumar
commit 6bb47e8ab98accb1319bd43c64966340ba3bba9a upstream. Memory leak and unbalanced reference count: If the hub gets disconnected while the core is still activating it, this can result in leaking memory of few USB structures. This will happen if we have done a kref_get() from hub_activate() and scheduled a delayed work item for HUB_INIT2/3. Now if hub_disconnect() gets called before the delayed work expires, then we will cancel the work from hub_quiesce(), but wouldn't do a kref_put(). And so the unbalance. kmemleak reports this as (with the commit e50293ef9775 backported to 3.10 kernel with other changes, though the same is true for mainline as well): unreferenced object 0xffffffc08af5b800 (size 1024): comm "khubd", pid 73, jiffies 4295051211 (age 6482.350s) hex dump (first 32 bytes): 30 68 f3 8c c0 ff ff ff 00 a0 b2 2e c0 ff ff ff 0h.............. 01 00 00 00 00 00 00 00 00 94 7d 40 c0 ff ff ff ..........}@.... backtrace: [<ffffffc0003079ec>] create_object+0x148/0x2a0 [<ffffffc000cc150c>] kmemleak_alloc+0x80/0xbc [<ffffffc000303a7c>] kmem_cache_alloc_trace+0x120/0x1ac [<ffffffc0006fa610>] hub_probe+0x120/0xb84 [<ffffffc000702b20>] usb_probe_interface+0x1ec/0x298 [<ffffffc0005d50cc>] driver_probe_device+0x160/0x374 [<ffffffc0005d5308>] __device_attach+0x28/0x4c [<ffffffc0005d3164>] bus_for_each_drv+0x78/0xac [<ffffffc0005d4ee0>] device_attach+0x6c/0x9c [<ffffffc0005d42b8>] bus_probe_device+0x28/0xa0 [<ffffffc0005d23a4>] device_add+0x324/0x604 [<ffffffc000700fcc>] usb_set_configuration+0x660/0x6cc [<ffffffc00070a350>] generic_probe+0x44/0x84 [<ffffffc000702914>] usb_probe_device+0x54/0x74 [<ffffffc0005d50cc>] driver_probe_device+0x160/0x374 [<ffffffc0005d5308>] __device_attach+0x28/0x4c Deadlocks: If the hub gets disconnected early enough (i.e. before INIT2/INIT3 are finished and the init_work is still queued), the core may call hub_quiesce() after acquiring interface device locks and it will wait for the work to be cancelled synchronously. But if the work handler is already running in parallel, it may try to acquire the same interface device lock and this may result in deadlock. Fix both the issues by removing the call to cancel_delayed_work_sync(). Fixes: e50293ef9775 ("USB: fix invalid memory access in hub_activate()") Reported-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devicesMathias Nyman
commit 8a1b2725a60d3267135c15e80984b4406054f650 upstream. Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can handle the new speed. In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed devices. In a few places we add a "Plus" string to inform the user of the new speed. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20USB: usbfs: fix potential infoleak in devioKangjie Lu
commit 681fef8380eb818c0b845fca5d2ab1dcbab114ee upstream. The stack object “ci” has a total size of 8 bytes. Its last 3 bytes are padding bytes which are not initialized and leaked to userland via “copy_to_user”. Signed-off-by: Kangjie Lu <kjlu@gatech.edu> Signed-off-by: Chas Williams <ciwillia@brocade.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20usb: quirks: Add no-lpm quirk for ElanJoseph Salisbury
commit 25b1f9acc452209ae0fcc8c1332be852b5c52f53 upstream. BugLink: http://bugs.launchpad.net/bugs/1498667 As reported in BugLink, this device has an issue with Linux Power Management so adding a quirk. This quirk was reccomended by Alan Stern: http://lkml.iu.edu/hypermail/linux/kernel/1606.2/05590.html Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-11usb: quirks: Add no-lpm quirk for Acer C120 LED ProjectorHans de Goede
commit 32cb0b37098f4beeff5ad9e325f11b42a6ede56c upstream. The Acer C120 LED Projector is a USB-3 connected pico projector which takes both its power and video data from USB-3. In combination with some hubs this device does not play well with lpm, so disable lpm for it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-11usb: quirks: Fix sortingHans de Goede
commit 81099f97bd31e25ff2719a435b1860fc3876122f upstream. Properly sort all the entries by vendor id. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-01USB: leave LPM alone if possible when binding/unbinding interface driversAlan Stern
commit 6fb650d43da3e7054984dc548eaa88765a94d49f upstream. When a USB driver is bound to an interface (either through probing or by claiming it) or is unbound from an interface, the USB core always disables Link Power Management during the transition and then re-enables it afterward. The reason is because the driver might want to prevent hub-initiated link power transitions, in which case the HCD would have to recalculate the various LPM parameters. This recalculation takes place when LPM is re-enabled and the new parameters are sent to the device and its parent hub. However, if the driver does not want to prevent hub-initiated link power transitions then none of this work is necessary. The parameters don't need to be recalculated, and LPM doesn't need to be disabled and re-enabled. It turns out that disabling and enabling LPM can be time-consuming, enough so that it interferes with user programs that want to claim and release interfaces rapidly via usbfs. Since the usbfs kernel driver doesn't set the disable_hub_initiated_lpm flag, we can speed things up and get the user programs to work by leaving LPM alone whenever the flag isn't set. And while we're improving the way disable_hub_initiated_lpm gets used, let's also fix its kerneldoc. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Matthew Giassa <matthew@giassa.net> CC: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04usb: hcd: out of bounds access in for_each_companionRobert Dobrowolski
commit e86103a75705c7c530768f4ffaba74cf382910f2 upstream. On BXT platform Host Controller and Device Controller figure as same PCI device but with different device function. HCD should not pass data to Device Controller but only to Host Controllers. Checking if companion device is Host Controller, otherwise skip. Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20Revert "usb: hub: do not clear BOS field during reset device"Greg Kroah-Hartman
commit e5bdfd50d6f76077bf8441d130c606229e100d40 upstream. This reverts commit d8f00cd685f5c8e0def8593e520a7fef12c22407. Tony writes: This upstream commit is causing an oops: d8f00cd685f5 ("usb: hub: do not clear BOS field during reset device") This patch has already been included in several -stable kernels. Here are the affected kernels: 4.5.0-rc4 (current git) 4.4.2 4.3.6 (currently in review) 4.1.18 3.18.27 3.14.61 How to reproduce the problem: Boot kernel with slub debugging enabled (otherwise memory corruption will cause random oopses later instead of immediately) Plug in USB 3.0 disk to xhci USB 3.0 port dd if=/dev/sdc of=/dev/null bs=65536 (where /dev/sdc is the USB 3.0 disk) Unplug USB cable while dd is still going Oops is immediate: Reported-by: Tony Battersby <tonyb@cybernetics.com> Cc: Du, Changbin <changbin.du@intel.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12USB: usb_driver_claim_interface: add sanity checkingOliver Neukum
commit 0b818e3956fc1ad976bee791eadcbb3b5fec5bfd upstream. Attacks that trick drivers into passing a NULL pointer to usb_driver_claim_interface() using forged descriptors are known. This thwarts them by sanity checking. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12usb: hub: fix a typo in hub_port_init() leading to wrong logicOliver Neukum
commit 0d5ce778c43bf888328231bcdce05d5c860655aa upstream. A typo of j for i led to a logic bug. To rule out future confusion, the variable names are made meaningful. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12usb: retry reset if a device times outOliver Neukum
commit 264904ccc33c604d4b3141bbd33808152dfac45b upstream. Some devices I got show an inability to operate right after power on if they are already connected. They are beyond recovery if the descriptors are requested multiple times. So in case of a timeout we rather bail early and reset again. But it must be done only on the first loop lest we get into a reset/time out spiral that can be overcome with a retry. This patch is a rework of a patch that fell through the cracks. http://www.spinics.net/lists/linux-usb/msg103263.html Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-17usb: hub: do not clear BOS field during reset deviceDu, Changbin
commit d8f00cd685f5c8e0def8593e520a7fef12c22407 upstream. In function usb_reset_and_verify_device, the old BOS descriptor may still be used before allocating a new one. (usb_unlocked_disable_lpm function uses it under the situation that it fails to disable lpm.) So we cannot set the udev->bos to NULL before that, just keep what it was. It will be overwrite when allocating a new one. Crash log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff8171f98d>] usb_enable_link_state+0x2d/0x2f0 Call Trace: [<ffffffff8171ed5b>] ? usb_set_lpm_timeout+0x12b/0x140 [<ffffffff8171fcd1>] usb_enable_lpm+0x81/0xa0 [<ffffffff8171fdd8>] usb_disable_lpm+0xa8/0xc0 [<ffffffff8171fe1c>] usb_unlocked_disable_lpm+0x2c/0x50 [<ffffffff81723933>] usb_reset_and_verify_device+0xc3/0x710 [<ffffffff8172c4ed>] ? usb_sg_wait+0x13d/0x190 [<ffffffff81724743>] usb_reset_device+0x133/0x280 [<ffffffff8179ccd1>] usb_stor_port_reset+0x61/0x70 [<ffffffff8179cd68>] usb_stor_invoke_transport+0x88/0x520 Signed-off-by: Du, Changbin <changbin.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-31usb: core: lpm: fix usb3_hardware_lpm sysfs nodeLu Baolu
commit bf5ce5bf3cc7136fd7fe5e8999a580bc93a9c8f6 upstream. Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM") introduced usb3_hardware_lpm sysfs node. This doesn't show the correct status of USB3 U1 and U2 LPM status. This patch fixes this by replacing usb3_hardware_lpm with two nodes, usb3_hardware_lpm_u1 (for U1) and usb3_hardware_lpm_u2 (for U2), and recording the U1/U2 LPM status in right places. This patch should be back-ported to kernels as old as 4.3, that contains Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM"). Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-18USB: fix invalid memory access in hub_activate()Alan Stern
Commit 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Alexandru Cornea <alexandru.cornea@intel.com> Tested-by: Alexandru Cornea <alexandru.cornea@intel.com> Fixes: 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-11USB: add quirk for devices with broken LPMAlan Stern
Some USB device / host controller combinations seem to have problems with Link Power Management. For example, Steinar found that his xHCI controller wouldn't handle bandwidth calculations correctly for two video cards simultaneously when LPM was enabled, even though the bus had plenty of bandwidth available. This patch introduces a new quirk flag for devices that should remain disabled for LPM, and creates quirk entries for Steinar's devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-04usb: Quiet down false peer failure messagesDon Zickus
My recent Intel box is spewing these messages: xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 4.3.0+ xhci-hcd usb usb2: SerialNumber: 0000:00:14.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb: failed to peer usb2-port2 and usb1-port1 by location (usb2-port2:none) (usb1-port1:usb2-port1) usb usb2-port2: failed to peer to usb1-port1 (-16) usb: port power management may be unreliable usb: failed to peer usb2-port3 and usb1-port1 by location (usb2-port3:none) (usb1-port1:usb2-port1) usb usb2-port3: failed to peer to usb1-port1 (-16) usb: failed to peer usb2-port5 and usb1-port1 by location (usb2-port5:none) (usb1-port1:usb2-port1) usb usb2-port5: failed to peer to usb1-port1 (-16) usb: failed to peer usb2-port6 and usb1-port1 by location (usb2-port6:none) (usb1-port1:usb2-port1) usb usb2-port6: failed to peer to usb1-port1 (-16) Diving into the acpi tables, I noticed the EHCI hub has 12 ports while the XHCI hub has 8 ports. Most of those ports are of connect type USB_PORT_NOT_USED (including port 1 of the EHCI hub). Further the unused ports have location data initialized to 0x80000000. Now each unused port on the xhci hub walks the port list and finds a matching peer with port1 of the EHCI hub because the zero'd out group id bits falsely match. After port1 of the XHCI hub, each following matching peer will generate the above warning. These warnings seem to be harmless for this scenario as I don't think it matters that unused ports could not create a peer link. The attached patch utilizes that assumption and just turns the pr_warn into pr_debug to quiet things down. Tested on my Intel box. Signed-off-by: Don Zickus <dzickus@redhat.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01usb: Use the USB_SS_MULT() macro to decode burst multiplier for log messageBen Hutchings
usb_parse_ss_endpoint_companion() now decodes the burst multiplier correctly in order to check that it's <= 3, but still uses the wrong expression if warning that it's > 3. Fixes: ff30cbc8da42 ("usb: Use the USB_SS_MULT() macro to get the ...") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01usb: core : hub: Fix BOS 'NULL pointer' kernel panicHans Yang
When a USB 3.0 mass storage device is disconnected in transporting state, storage device driver may handle it as a transport error and reset the device by invoking usb_reset_and_verify_device() and following could happen: in usb_reset_and_verify_device(): udev->bos = NULL; For U1/U2 enabled devices, driver will disable LPM, and in some conditions: from usb_unlocked_disable_lpm() --> usb_disable_lpm() --> usb_enable_lpm() udev->bos->ss_cap->bU1devExitLat; And it causes 'NULL pointer' and 'kernel panic': [ 157.976257] Unable to handle kernel NULL pointer dereference at virtual address 00000010 ... [ 158.026400] PC is at usb_enable_link_state+0x34/0x2e0 [ 158.031442] LR is at usb_enable_lpm+0x98/0xac ... [ 158.137368] [<ffffffc0006a1cac>] usb_enable_link_state+0x34/0x2e0 [ 158.143451] [<ffffffc0006a1fec>] usb_enable_lpm+0x94/0xac [ 158.148840] [<ffffffc0006a20e8>] usb_disable_lpm+0xa8/0xb4 ... [ 158.214954] Kernel panic - not syncing: Fatal exception This commit moves 'udev->bos = NULL' behind usb_unlocked_disable_lpm() to prevent from NULL pointer access. Issue can be reproduced by following setup: 1) A SS pen drive behind a SS hub connected to the host. 2) Transporting data between the pen drive and the host. 3) Abruptly disconnect hub and pen drive from host. 4) With a chance it crashes. Signed-off-by: Hans Yang <hansy@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01USB: quirks: Fix another ELAN touchscreenAdrien Vergé
Like other buggy models that had their fixes [1], the touchscreen with id 04f3:21b8 from ELAN Microelectronics needs the device-qualifier quirk. Otherwise, it fails to respond, blocks the boot for a random amount of time and pollutes dmesg with: [ 2887.373196] usb 1-5: new full-speed USB device number 41 using xhci_hcd [ 2889.502000] usb 1-5: unable to read config index 0 descriptor/start: -71 [ 2889.502005] usb 1-5: can't read configurations, error -71 [ 2889.654571] usb 1-5: new full-speed USB device number 42 using xhci_hcd [ 2891.783438] usb 1-5: unable to read config index 0 descriptor/start: -71 [ 2891.783443] usb 1-5: can't read configurations, error -71 [1]: See commits c68929f, 876af5d, d749947, a32c99e and dc703ec. Tested-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-19usb: kconfig: fix warning of select USB_OTGPeter Chen
When choose randconfig for kernel build, it reports below warning: "warning: (USB_OTG_FSM && FSL_USB2_OTG && USB_MV_OTG) selects USB_OTG which has unmet direct dependencies (USB_SUPPORT && USB && PM)" In fact, USB_OTG is visible symbol and depends on PM, so the driver needs to depend on it to reduce dependency problem. Signed-off-by: Peter Chen <peter.chen@freescale.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-26USB: core: Codestyle fix in urb.cJonas Hesselmann
Delete braces around single statement block suggested by checkpatch.pl Signed-off-by: Jonas Hesselmann <jonas.hesselmann@hotmail.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16usb: hcd: use USB_DT_*Sergei Shtylyov
Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-12Merge 4.3-rc5 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well to make merges easier. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: Add device quirk for Logitech PTZ camerasVincent Palatin
Add a device quirk for the Logitech PTZ Pro Camera and its sibling the ConferenceCam CC3000e Camera. This fixes the failed camera enumeration on some boot, particularly on machines with fast CPU. Tested by connecting a Logitech PTZ Pro Camera to a machine with a Haswell Core i7-4600U CPU @ 2.10GHz, and doing thousands of reboot cycles while recording the kernel logs and taking camera picture after each boot. Before the patch, more than 7% of the boots show some enumeration transfer failures and in a few of them, the kernel is giving up before actually enumerating the webcam. After the patch, the enumeration has been correct on every reboot. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04USB: Add reset-resume quirk for two Plantronics usb headphones.Yao-Wen Mao
These two headphones need a reset-resume quirk to properly resume to original volume level. Signed-off-by: Yao-Wen Mao <yaowen@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: otg: don't set a_alt_hnp_support feature for OTG 2.0 deviceLi Jun
Since a_alt_hnp_support is obsolete in OTG 2.0, HNP capable host should send this set feature request only if the otg device is connecting to a non-HNP port and it's compliant with OTG 1.x revision. This is done by checking its otg descriptor length, OTG 2.0 uses usb_otg20_descriptor which has different length than OTG 1.x using usb_otg_descriptor. Signed-off-by: Li Jun <jun.li@freescale.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: core: driver: Use kmalloc_arrayMuhammad Falak R Wani
Use kmalloc_array instead of kmalloc to allocate memory for an array. Also, remove the dev_warn for a memory leak, making the if check more sleek. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: message: remove redundant declarationKris Borer
Fix the Sparse warning: message.c:1390:21: warning: symbol 'i' shadows an earlier one message.c:1294:13: originally declared here Signed-off-by: Kris Borer <kborer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: hub: remove redundant declarationsKris Borer
Fix two occurrences of the Sparse warning: warning: symbol XXX shadows an earlier one Signed-off-by: Kris Borer <kborer@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: core: hub: Removed some warnings generated by checkpatch.plChase Metzger
Removed some checkpatch.pl warnings saying there was an unwanted space between function names and their arguments. Signed-off-by: Chase Metzger <chasemetzger15@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: define HCD_USB31 speed option for hosts that support USB 3.1 featuresMathias Nyman
Hosts that support USB 3.1 Enhaned SuperSpeed can set their speed to HCD_USB31 to let usb core and host drivers know that the controller supports new USB 3.1 features. make sure usb core handle HCD_USB31 hosts correctly, for now similar to HCD_USB3. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: store the new usb 3.1 SuperSpeedPlus device capability descriptorMathias Nyman
If a device supports usb 3.1 SupeerSpeedPlus Gen2 speeds it povides a SuperSpeedPlus device capability descriptor as a part of its BOS descriptor. If we find one while parsing the BOS then save it togeter with the other device capabilities found in the BOS Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29Merge 4.3-rc3 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-18 01:11:52 +0000