summaryrefslogtreecommitdiff
path: root/drivers/usb/misc/usb3503.c
AgeCommit message (Collapse)Author
2014-07-11usb: usb3503: add PM functionsJoonyoung Shim
The usb3503 needs to switch to standby mode while suspending and should switch to hub mode when resumed. Also we can control clock on PM function. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09usb: misc: usb3503: Update error code in print messageTushar Behera
'err' is uninitialized, rather print the error code directly. This also fixes following warning. drivers/usb/misc/usb3503.c: In function ‘usb3503_probe’: drivers/usb/misc/usb3503.c:195:11: warning: ‘err’ may be used uninitialized in this function [-Wmaybe-uninitialized] dev_err(dev, "unable to request refclk (%d)\n", err); Signed-off-by: Tushar Behera <tushar.b@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27usb: usb5303: add support for reference clock specified in device treeMarek Szyprowski
USB3503 chip supports 8 values of reference clock. The value is specified by REF_SEL[1:0] pins and INT_N line. This patch add support for getting 'refclk' clock, enabling it and setting INT_N line according to the value of the gathered clock. If no clock has been specified, driver defaults to the old behaviour (assuming that clock has been specified by REF_SEL pins from primary reference clock frequencies table). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Support operation with no I2C controlMark Brown
Refactor so that register writes for configuration are only performed if the device has a regmap provided and also register as a platform driver. This allows the driver to be used to manage GPIO based control of the device. Signed-off-by: Mark Brown <broonie@linaro.org> Cc: devicetree@vger.kernel.org Reviewed-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Add USB3503A to the compatible listMark Brown
There are no software visible differences that I am aware of but in case any are discovered allow the DTS to specify exactly which device is present. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Default to hub modeMark Brown
Since there is no runtime interface for changing modes this is probably the most sensible default. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Fix typos in error messagesMark Brown
Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Factor out I2C probeMark Brown
In preparation for supporting operation without an I2C control interface factor out the I2C-specific parts of the probe routine from those that don't do any register I/O. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Convert to regmapMark Brown
This will give access to the diagnostic infrastructure regmap has but the main point is to support future refactoring. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Actively manage Hub Connect GPIOMark Brown
If the connect signal is pulled high then the device will start up meaning that if we just pull it high on probe then the device will start running prior to the configuration being written out. Fix this by pulling the GPIO low when we reset and only pulling it high when configuration is finished. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Use gpio_set_value_cansleep()Mark Brown
The /RESET GPIO is not manipulated from atomic context so support GPIOs that can't be written from atomic context by using _cansleep(). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Convert to devm_ APIsMark Brown
Saves us a bit of code. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: Fix swapped properties in usb3503 DT parsingMark Brown
The intn and connect GPIO properties are swapped in the code which will cause failures at runtime if these are connected, fix the code. There are currently no in-tree users of this device to check or update. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-31usb: misc: usb3503: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03usb: misc: usb3503: Remove 100ms sleep on reset, conform to data sheetJulius Werner
The usb3503 driver sleeps a flat 100ms when resetting the chip, with a comment about waiting for the reference clock. This seems to be a board-specific detail that should not hold up boot across all platforms. This patch reduces the sleep to the 4ms initialization delay that the chip itself actually requires (as per its data sheet). If certain boards require more time to set up the reference clock, they should change this through local patches or add a proper, configurable synchronization mechanism. Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Dongjin Kim <tobetter@gmail.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03usb: misc: usb3503: Fix up whitespaceJulius Werner
Remove an erroneous tab that should be a space. Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Dongjin Kim <tobetter@gmail.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30usb: misc: usb3503: Adding device tree entry 'disabled-ports'Dongjin Kim
This patch is to add a property 'disabled-ports' representing the unused port of USB3503. USB3503 can support up to 3 USB host port and each ports can be controlled to be enabled or disabled. Do not describe this property if all ports must be enabled. You can represent the ports to disable in the device tree. usb3503@08{ ... disabled-ports = <2 3>; ... }; Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30usb: misc: usb3503: Add to select the ports to disableDongjin Kim
This patch is to disable the USB ports unconnected to USB3503. In order to disable the port, 'port_off_mask' must be set. * Disable PORT1 only .port_off_mask = USB3503_OFF_PORT1; * Disable PORT1 and PORT3 only .port_off_mask = USB3503_OFF_PORT1 | USB3503_OFF_PORT3; * Enables all ports .port_off_mask = 0; Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15USB: misc: usb3503: use module_i2c_driver to simplify the codeWei Yongjun
Use the module_i2c_driver() macro to make the code smaller and a bit simpler. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25USB: misc: usb3503: Fix compiler warningDongjin Kim
This patch fixes the compiler warning of uninitialized variable. drivers/usb/misc/usb3503.c: In function ‘usb3503_probe’: drivers/usb/misc/usb3503.c:215:13: warning: ‘mode’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-24USB: misc: usb3503: add dt supportDongjin Kim
Added device tree support for usb3503 driver and add new document with device tree binding information. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: misc: fixup smatch WARNINGDongjin Kim
This patch fixes the warning, 6a099c63650e50ebf7d1259b859a3d230aec4207 [4/10] USB: misc: Add USB3503 High-Speed Hub Controller drivers/usb/misc/usb3503.c:238 usb3503_probe() error: we previously assumed 'pdata' could be null (see line 196) Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17usb: misc: usb3503_probe() can be staticFengguang Wu
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: misc: Add USB3503 High-Speed Hub ControllerDongjin Kim
This patch adds new driver of SMSC USB3503 USB 2.0 hub controller with HSIC upstream connectivity and three USB 2.0 downstream ports. The specification can be found from 'http://www.smsc.com/index.php?tid=295&pid=325'. The current version have been tested very basic features switching the modes, HUB-MODE and STANDBY-MODE. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-02-13 21:24:17 +0000