summaryrefslogtreecommitdiff
path: root/drivers/usb/misc/usbtest.c
AgeCommit message (Collapse)Author
2017-11-18usb: usbtest: fix NULL pointer dereferenceAlan Stern
commit 7c80f9e4a588f1925b07134bb2e3689335f6c6d8 upstream. If the usbtest driver encounters a device with an IN bulk endpoint but no OUT bulk endpoint, it will try to dereference a NULL pointer (out->desc.bEndpointAddress). The problem can be solved by adding a missing test. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20usb: misc: add missing continue in switchGustavo A. R. Silva
commit 2c930e3d0aed1505e86e0928d323df5027817740 upstream. Add missing continue in switch. Addresses-Coverity-ID: 1248733 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-11usb: misc: usbtest: add fix for driver hangLu Baolu
In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling into usb_sg_cancel(). usb_sg_cancel() will do nothing and return directly if req->status has been set to a non-zero value. This will cause driver hang whenever transfer time out is triggered. This patch fixes this issue. It could be backported to stable kernel with version later than v3.15. Cc: stable@vger.kernel.org # 3.15+ Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-09usb: misc: usbtest: usbtest_do_ioctl may return positive integerPeter Chen
For case 14 and case 21, their correct return value is the number of bytes transferred, so it is a positive integer. But in usbtest_ioctl, it takes non-zero as false return value for usbtest_do_ioctl, so it will treat the correct test as wrong test, then the time on tests will be the minus value. Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Fixes: 18fc4ebdc705 ("usb: misc: usbtest: Remove timeval usage") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03usb: misc: usbtest: fix pattern tests for scatterlists.Mathias Nyman
The current implemenentation restart the sent pattern for each entry in the sg list. The receiving end expects a continuous pattern, and test will fail unless scatterilst entries happen to be aligned with the pattern Fix this by calculating the pattern byte based on total sent size instead of just the current sg entry. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Fixes: 8b5249019352 ("[PATCH] USB: usbtest: scatterlist OUT data pattern testing") Cc: <stable@vger.kernel.org> # v2.6.18+ Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usb: misc: usbtest: fix error of urb allocationChunfeng Yun
urb allocation will fail when usbtest_alloc_urb() tries to allocate zero length buffer, but it doesn't need it in fact, so just skips buffer allocation in the case. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01usb: misc: usbtest: Remove timeval usageDeepa Dinamani
timeval is deprecated and not y2038 safe. Its size also changes according to 32 bit/ 64 bit compilation. Replace it with 32 and 64 bit versions of its individual fields, giving two ioctls with different code values. The two ioctls are necessary to maintain the 32 bit and 64 bit userspace compatibility with a 64/32 bit kernel. Change unsigned to __u32 types for a definitive userspace interface. This is in accordance with the psABI that the unsigned type is always 32 bits. Also use motonic timer instead of real time to ensure positive delta values. Refactor usbtest_ioctl for readability to isolate the handling of the testing timing measurement. The official testusb userspace tool can be changed in a separate patch to reflect the __u32 changes as well. It can use the usbtest_param_32 struct, since 32 bit seconds is long enough for test durations. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01usb: misc: usbtest: improve the description for error messagePeter Chen
Now the function of complicated_callback is not only used for iso transfer, improve the error message to reflect it. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-13usb: misc: usbtest: add bulk queue testPeter Chen
The bulk queue tests are used to show 'best performance' for bulk transfer, we are often asked this question by users. The implementation is the same with iso test, that is queue request at interrupt completion, so we reuse the iso structures, and rename them as common one. It's result should be very close to IC simulation, in order to get that, the device side should also need to prepare enough queue. We have got the 'best performance' (IN: 41MB, OUT: 39MB) at i.mx platform (USB2, ARM Cortex A9, stream mode need to enable) with below command: Host side: modprobe usbtest ./testusb -a -t 27 -g 64 -s 16384 ./testusb -a -t 28 -g 64 -s 16384 Gadget side: modprobe g_zero loopdefault=1 qlen=64 buflen=16384 Signed-off-by: Peter Chen <peter.chen@freescale.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27usb: misc: usbtest: format the data pattern according to max packet sizeAlan Stern
With this change, the host and gadget doesn't need to agree with transfer length for comparing the data, since they doesn't know each other's transfer size, but know max packet size. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> (Fixed the 'line over 80 characters warning' by Peter Chen) Tested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27usb: misc: usbtest: using the same data format among write/compare/outputPeter Chen
Using the same data format "buf[j] = (u8)(i + j)" among write, compare buf, and console output stage. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27usb: misc: usbtest: delete useless memset for urbs arrayPeter Chen
The element of urbs array will be initialized at below code at once. for (i = 0; i < param->sglen; i++) { urbs[i] = iso_alloc_urb(udev, pipe, desc, param->length, offset); Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27usb: misc: usbtest: allocate size of urb array according to user parameterPeter Chen
Allocate the size of urb pointer array according to testusb's parameter sglen, and limits the length of sglen as MAX_SGLEN (128 currently). Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-18usb: misc: usbtest: format max packet size for iso transferPeter Chen
The current code prints all wMaxPacketSize content at endpoint descriptor, if there is a high speed, high bandwidth endpoint, it may confuse the users, eg, if there are 3 transactions during microframe, it will print "wMaxPacket 1400" for packet content. This commit splits wMaxpacketSize and transaction numbers for output messages. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23usb: hub: rename khubd to hub_wq in documentation and commentsPetr Mladek
USB hub has started to use a workqueue instead of kthread. Let's update the documentation and comments here and there. This patch mostly just replaces "khubd" with "hub_wq". There are only few exceptions where the whole sentence was updated. These more complicated changes can be found in the following files: Documentation/usb/hotplug.txt drivers/net/usb/usbnet.c drivers/usb/core/hcd.c drivers/usb/host/ohci-hcd.c drivers/usb/host/xhci.c Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-29usbtest: Add interrupt EP testcasesAmit Virdi
Two simple test cases for interrupt endpoints are added to the usbtest.c file. These are simple non-queued interrupt IN and interrupt OUT transfers. Currently, only gadget zero is capable of executing the interrupt EP test cases. However, extending the same to other gadgets is extremely simple and can be done on-demand. The two new tests added are - Test 25: To verify Interrupt OUT transfer - Test 26: To verify Interrupt IN transfer Since the default value of wMaxPacketSize is set as 1024, so interrupt IN transfers must be specified with the size parameter = multiple of 1024. Otherwise the default value (512) in the usbtest application fails the transfer. See [RUN 4] for sample logs The application logs (usbtest) and corresponding kernel logs are as following: [Run 1] ./testusb -a -c 10 -s 2048 -t 26 -v 511 usbtest 7-1:3.0: TEST 26: read 2048 bytes 10 times [Run 2] ./testusb -a -c 10 -s 1024 -t 25 -v 511 usbtest 7-1:3.0: TEST 25: write 1024 bytes 10 times [Run 3] ./testusb -a -c 10 -s 1098 -t 25 -v 511 usbtest 7-1:3.0: TEST 25: write 1098 bytes 10 times [Run 4 - Failure case scenario] ./testusb -a -t 26 unknown speed /dev/bus/usb/007/004 0 /dev/bus/usb/007/004 test 26 --> 75 (Value too large for defined data type) usbtest 7-1:3.0: TEST 26: read 512 bytes 1000 times usb 7-1: test26 failed, iterations left 999, status -75 (not 0) Signed-off-by: Amit Virdi <amit.virdi@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-17USB: usbtest: add a timeout for scatter-gather testsAlan Stern
In usbtest, tests 5 - 8 use the scatter-gather library in usbcore without any sort of timeout. If there's a problem in the gadget or host controller being tested, the test can hang. This patch adds a 10-second timeout to the tests, so that they will fail gracefully with an ETIMEDOUT error instead of hanging. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Huang Rui <ray.huang@amd.com> Tested-by: Huang Rui <ray.huang@amd.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27usb: usbtest: add pattern check on pipe in phase of unlink readHuang Rui
TEST 11 unlinks the URB read request for N times. When host and gadget both initialize pattern 1 (mod 63) data series to do IN transfer, the host side function should check the data buffer if it is as mod 63 series, because the data packet which host receivced will follow pattern 1. So this patch adds this checking action. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27usb: usbtest: fix unlink write error with pattern 1Huang Rui
TEST 12 and TEST 24 unlinks the URB write request for N times. When host and gadget both initialize pattern 1 (mod 63) data series to transfer, the gadget side will complain the wrong data which is not expected. Because in host side, usbtest doesn't fill the data buffer as mod 63 and this patch fixed it. [20285.488974] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready [20285.489181] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Not Active [20285.489423] dwc3 dwc3.0.auto: ep1out-bulk: req ffff8800aa6cb480 dma aeb50800 length 512 last [20285.489727] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Start Transfer' params 00000000 a9eaf000 00000000 [20285.490055] dwc3 dwc3.0.auto: Command Complete --> 0 [20285.490281] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready [20285.490492] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Active [20285.490713] dwc3 dwc3.0.auto: ep1out-bulk: endpoint busy [20285.490909] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Complete [20285.491117] dwc3 dwc3.0.auto: request ffff8800aa6cb480 from ep1out-bulk completed 512/512 ===> 0 [20285.491431] zero gadget: bad OUT byte, buf[1] = 0 [20285.491605] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Set Stall' params 00000000 00000000 00000000 [20285.491915] dwc3 dwc3.0.auto: Command Complete --> 0 [20285.492099] dwc3 dwc3.0.auto: queing request ffff8800aa6cb480 to ep1out-bulk length 512 [20285.492387] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready [20285.492595] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Not Active [20285.492830] dwc3 dwc3.0.auto: ep1out-bulk: req ffff8800aa6cb480 dma aeb51000 length 512 last [20285.493135] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Start Transfer' params 00000000 a9eaf000 00000000 [20285.493465] dwc3 dwc3.0.auto: Command Complete --> 0 Cc: <stable@vger.kernel.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-21Merge tag 'for-usb-next-2013-12-20' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next Sarah writes: xhci: Cleanups, non-urgent fixes for 3.14. Happy Holidays, Greg! Here's four patches to be queued to usb-next for 3.14. One adds a module parameter to the xHCI driver to allow users to enable xHCI quirks without recompiling their kernel, which you've already said is fine. The second patch is a bug fix for new usbtest code that's only in usb-next. The third patch is simple cleanup. The last patch is a non-urgent bug fix for xHCI platform devices. The bug has been in the code since 3.9. You've been asking me to hold off on non-urgent bug fixes after -rc4/-rc5, so it can go into usb-next, and be backported to stable once 3.14 is out. These have all been tested over the past week. I did run across one oops, but it turned out to be a bug in 3.12, and therefore not related to any of these patches. Please queue these for usb-next and 3.14. Thanks, Sarah Sharp
2013-12-18usb: usbtest: Always clear halt else further tests will failRoger Quadros
In test_halt() we set an endpoint halt condition and return on halt verification failure, then the enpoint will remain halted and all further tests related to that enpoint will fail. This is because we don't tackle endpoint halt error condition in any of the tests. To avoid that situation, make sure to clear the halt condition before exiting test_halt(). Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-18usb: usbtest: Add timetout to simple_io()Roger Quadros
Without a timetout some tests e.g. test_halt() can remain stuck forever. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-17usbtest: Fix BOS control test for USB 2.01 devices.Sarah Sharp
Commit c952a8ba7136505cd1ca01735cc748ddc08c7d2f "usb: usbtest: add a test case to support bos for queue control" will cause USB 2.01 and USB 2.10 devices with a BOS descriptor to fail case 15 of the control test. The Link PM errata (released in 2007, updated in 2011) says: "The value of the bcdUSB field in the standard USB 2.0 Device Descriptor is used to indicate that the device supports the request to read the BOS Descriptor (i.e. GetDescriptor(BOS)). Devices that support the BOS descriptor must have a bcdUSB value of 0201H or larger." The current code says that non-SuperSpeed devices *must* return -EPIPE, as this comment shows: /* sign of this variable means: * -: tested code must return this (negative) error code * +: tested code may return this (negative too) error code */ int expected = 0; This means the test will fail with USB 2.01 and USB 2.10 devices that provide a BOS descriptor. Change it to only require a stall response if the USB device bcdUSB is less than 2.01. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Huang Rui <ray.huang@amd.com>
2013-12-08usb: usbtest: update bos test coverage to usb 2.1 deviceHuang Rui
The commit "usb: usbtest: support bos descriptor test for usb 3.0" introduced a test for bos descriptor. And USB 2.1 device also can be checked. So this patch extends the test coverage to support USB 2.1 device. Reported-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08usb: usbtest: fix the bit mask of usb 2.0 extension descriptorHuang Rui
USB 2.1 Link PM adds to use bits[1:15] according to USB 2.0 ECN Errata for Link Power Management spec. Bit Encoding 0 Reserved 1 LPM 2 BESL & Altemate HIRD definitions supported 3 Recommended Baseline BESL valid 4 Recommended Deep BESL valid 11:8 Recommended Baseline BESL value 15:12 Recommended Deep BESL value 31:16 Reserved So fix the bit mask from 0x1e to 0xfffe. Reported-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08usb: usbtest: add a test case to support bos for queue controlHuang Rui
In Test 10 of usbtest module, it queues multiple control messages and thereby tests control message queuing, protocol stalls, short reads, and fault handling. And this patch add a test case to support queue BOS control request for USB 3.0 SPEC. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30usb: usbtest: support container id descriptor testHuang Rui
In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. Container ID descriptor is one of the generic device-level capbility descriptors which added in section 9.6.2.3 of USB 3.0 spec. This patch adds to support getting Container ID descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30usb: usbtest: support superspeed device capbility descriptor testHuang Rui
In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. SuperSpeed USB Device Capability descriptor is one of the generic device-level capbility descriptors which added in section 9.6.2.2 of USB 3.0 spec. This patch adds to support getting SuperSpeed USB Device Capability descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30usb: usbtest: support usb2 extension descriptor testHuang Rui
In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. USB2.0 Extension descriptor is one of the generic device-level capbility descriptors which added in section 9.6.2.1 of USB 3.0 spec. This patch adds to support getting usb2.0 extension descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: usbtest: support bos descriptor test for usb 3.0Huang Rui
In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. This patch adds to support getting bos descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: usbtest: fix checkpatch warning as sizeof code styleHuang Rui
Script checkpatch.pl always complains incorrect code style like below: WARNING: sizeof *udev->bos->desc should be sizeof(*udev->bos->desc) This patch fixes the warning for usbtest module. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25usb: usbtest: bmAttributes would better be maskedHuang Rui
When transfer type is isochronous, the other bits (bits 5..2) of bmAttributes in endpoint descriptor might not be set zero. So it's better to use usb_endpoint_type routine to mask bmAttributes with USB_ENDPOINT_XFERTYPE_MASK to judge the transfter type later. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-31USB: simplify the interface of usb_get_status()Alan Stern
This patch simplifies the interface presented by usb_get_status(). Instead of forcing callers to check for the proper data length and convert the status value to host byte order, the function will now do these things itself. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-31USB: altsetting overrides for usbtestAlan Stern
The usbtest driver includes some rather simple-minded logic for selecting an altsetting to test. It doesn't work well for the g_zero gadget, because it selects altsetting 0 (which doesn't have isochronous endpoints) rather than altsetting 1 (which does have them, if the gadget's hardware supports them). This prevents usbtest's isochronous tests (15, 16, 22, and 23) from working with g_zero. Since g_zero is one of the most common gadget drivers used for USB testing, usbtest should do a better job of supporting it. But since some programs may rely on the current scheme for selecting altsettings, I didn't want to change it. Instead, this patch (as1655) adds a module parameter to usbtest, which can be used to override the default altsetting. Since usbtest is never used by normal users (most distributions probably don't even build it), the new module parameter won't inconvenience anybody. In any case, it is entirely optional -- leaving it unset preserves the existing behavior. The patch also fixes a related bug in usbtest: After selecting an altsetting, the driver neglects to store its selection. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07USB: usbtest: fix test number in log messageAlan Stern
This patch (as1639) fixes a minor bug in the usbtest driver. Due to concurrent changes, a test originally written as number 17 got changed to number 24, but the corresponding change was not made in the log message. This updates the log message. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21USB: usbtest: prevent a divide by zero bugDan Carpenter
If param->length is zero, then this could lead to a divide by zero bug later in the function when we do: size %= max; Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-14usb: misc: usbtest: send ISO packets for g_zeroBoyan Nedeltchev
since commit b4036cc (usb: gadget: add isochronous support to gadget zero), g_zero has learned about isochronous transfers, which allows us to use usbtest.ko to exercise isochronous pipes. All we need to do to enable that functionality on usbtest.ko, is set the "iso" to 1 on struct usbtest_info Signed-off-by: Boyan Nedeltchev <boyan@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01usb: usbtest: two super speed fixes for usbtestPaul Zimmerman
bMaxPacketSize0 field for super speed is a power of 2, not a count. The size itself is always 512. Max packet size for a super speed bulk endpoint is 1024, so allocate the urb size in halt_simple() accordingly. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18drivers/usb/misc/usbtest.c: add kfreesJulia Lawall
Free the two previously allocated buffers before exiting the function in an error case. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-17usb: usbtest: avoid integer overflow in alloc_sglist()Xi Wang
A large `nents' from userspace could overflow the allocation size, leading to memory corruption. | alloc_sglist() | usbtest_ioctl() Use kmalloc_array() to avoid the overflow. Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-17usb: usbtest: avoid integer overflow in test_ctrl_queue()Xi Wang
Avoid overflowing context.count = param->sglen * param->iterations, where both `sglen' and `iterations' are from userspace. | test_ctrl_queue() | usbtest_ioctl() Keep -EOPNOTSUPP for error code. Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-11-26USB: remove BKL commentsDavidlohr Bueso
The BKL is a gonner. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-18usb: Provide usb_speed_string() functionMichal Nazarewicz
In a few places in the kernel, the code prints a human-readable USB device speed (eg. "high speed"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To mitigate this issue, this commit introduces usb_speed_string() function, which returns a human-readable name of provided speed. It also changes a few places switch was used to use this new function. This changes a bit the way the speed is printed in few instances at the same time standardising it. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23USB: use usb_endpoint_maxp() instead of le16_to_cpu()Kuninori Morimoto
Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23USB: usbtest: use URB_ZERO_PACKET for BULK-OUT transfersSebastian Andrzej Siewior
Executing | testusb -a -c 1 -t 3 -v 421 -s 2048 does not complete on the gadget side. g_zero enqueues a 4096 bytes long buffer. The host sends 2048bytes which is a multiple of wMaxPacketSize (either 64 or 512 bytes). The host is done with sending data but the gadget waits for more. Since the protocol does not include transfer-length-field sending a terminating zero packet seems the only way out. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-23Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits) USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h USB: UHCI: Support big endian GRUSBHC HC sparc: add {read,write}*_be routines USB: UHCI: Add support for big endian descriptors USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier USB: UHCI: Add support for big endian mmio usb-storage: Correct adjust_quirks to include latest flags usb/isp1760: Fix possible unlink problems usb/isp1760: Move function isp1760_endpoint_disable() within file. USB: remove remaining usages of hcd->state from usbcore and fix regression usb: musb: ux500: add configuration and build options for ux500 dma usb: musb: ux500: add dma glue layer for ux500 usb: musb: ux500: add dma name for ux500 usb: musb: ux500: add ux500 specific code for gadget side usb: musb: fix compile error usb-storage: fix up the unusual_realtek device list USB: gadget: f_audio: Fix invalid dereference of initdata EHCI: don't rescan interrupt QHs needlessly OHCI: fix regression caused by nVidia shutdown workaround USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage ...
2011-05-10usb: fix warning in usbtest module v2Greg Dietsche
On amd64 unsigned is not as wide as pointer and this causes a compiler warning. Switching to unsigned long corrects the problem. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-10treewide: fix a few typos in commentsJustin P. Mattock
- kenrel -> kernel - whetehr -> whether - ttt -> tt - sss -> ss Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-02usb/usbtest: fix test10 on superpseedSebastian Andrzej Siewior
dummy_hcd + g_zero: |./testusb -a -s 1024 -v 1024 -t 10 | usbtest 2-1:3.0: subtest 14 error, status 0 with patch: ./testusb -a -t 10 |unknown speed /proc/bus/usb/001/002 | dummy_udc dummy_udc: disabled ep-a | dummy_udc dummy_udc: disabled ep-b | dummy_udc dummy_udc: enabled ep-a (ep1in-bulk) maxpacket 1024 | dummy_udc dummy_udc: enabled ep-b (ep2out-bulk) maxpacket 1024 | zero gadget: source/sink enabled | usbtest 1-1:3.0: TEST 10: queue 32 control calls, 1000 times | dummy_hcd dummy_hcd: timer fired with no URBs pending? |/proc/bus/usb/001/002 test 10, 0.022370 secs Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-02usb/usbtest: print super on super speedSebastian Andrzej Siewior
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-04 00:11:31 +0000